DENSO TEN FT0107A Car Audio User Manual Users manual
Fujitsu Ten Limited Car Audio Users manual
Users manual
Bluetooth Pairing
Press HOME button
to display Home Screen.
Press Settings button.
FT0107A Operation Manual for Bluetooth
1
2
3
Settings Menu will be displayed
Press Bluetooth button.
Press Connect Phone button.
Press Add New button.
Turn on the Bluetooth function of the device
to be paired and connect to the radio
unit.
Radio Unit Name: CAR MULTIMEDIA
4
5
6
This screen will be displayed once the
device is successfully connected to
the radio unit.
For Android phone, a prompt to transfer
phonebook contact will be displayed in
the phone screen.
For Android, this screen will be displayed
if the user opt not to transfer the phonebook.
7
※
This screen will be displayed while
transferring phonebook.
※
For iphone, phonebook will be
automatically transferred.
8
Bluetooth Handsfree - Outgoing Call (Number Dial)
Press Phone button.
Press Numberpad button.
Enter a phone number using the keypad
displayed on the screen.
2
1
3
After entering the phone number,
press the CALL button
When the call is in progress, this screen
will be displayed.
when the call has ended.
※ Display will return to its previous mode
Press the END button
to end call.
4
5
6
Bluetooth Handsfree - Outgoing Call (Phonebook)
Press Phone button.
Select the contact the you would like
to call from the list.
Press Contacts button.
1
2
3
Press the CALL button
When the call is in progress, this screen
will be displayed.
Press the END button
to end call
※ Display will return to its previous mode
when the call has ended.
4
5
6
Bluetooth Handsfree - Incoming Call
This screen will be displayed if there
is an incoming call.
To answer the call, press the
ANSWER button
To reject the call, press the
REJECT button
※ Display will return to its previous mode
when the call has ended.
2
1
Bluetooth Audio
Press Bluetooth Audio button.
This screen will be displayed while
BT audio is playing.
1
2
FCC ID: BABFT0107A
CAUTION: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has
very low levels of RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm
and more between the radiator and person's body in normal use position.
Co-location: This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.