DGL Group AQDSC Bluetooth Speaker User Manual NUTEK B18 MANUAL0106

DGL Group LTD. Bluetooth Speaker NUTEK B18 MANUAL0106

User manual

User’s ManualIntroduction:you can use this item with tablet,notebook and many types of smartphone to stream music,and enjoy handsfree calling.In order to get the best results when using the device,please read this manual first before using.Feartures-Volume and song control directly on speaker unit-Stunning sound clarity-Ultra portable design-Great for parties, indoor and outdoor-Allow you to make and answer phone callsSpecificationsPackage ContentsLoudspeaker: 4Ω 5WBuilt-in Power:Li-ion 600mAhDimensions: 3.6 in(W)*3.6 in(L)*1.6 in(H)SNR:80± 3dBWireless Working Frequency: 2.402-2.480 GhzWireless Transmission Distance: up to 32 ftCharging Time: 1-2 hoursWeight:  5.8 ozSpeaker Dimension:1.7 inCharging: 5 V, 500mA1. Bluetooth Speaker 2. USB Charging cable 3. User manual Bluetooth SpeakerUser’s ManualImportant Safety Precautions1. Keep this product and its charging cable away from excessive heat.2. Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.3. Do not disassemble your device.4. Only use your device on a flat, stable surface.When using your Bluetooth Mobile Speaker, basic safety precautions should always be followed, including the following:A Quick Look at Your Device  121 321. Previous: Press and hold to access the last track in playlist.Press to lower the volume.2. Phone: Press this button to activate thethe speaker phone function. When music isplaying, press to play or pause a track. 3. Next: Press and hold to access the nexttrack in a playlist.Press to increase the volume.1. Charging PortYou can plug one end of the included USB Charging Cable into this jack, while plugging the other end into a USB port on your computer in order to charge your speaker’s built in lithium battery.  2. ON/OFF SwitchPress and hold the“     ”for power on Press and hold the“     ”again for power offCharging Your Speaker1. Connect one end of the included USB Charging Cable to the Charging Port on your speaker.  Then plug the other end of the USB Charging Cable into a suitable USB port on your computer to recharge your speaker’s internal rechargeable battery.NOTE: The internal battery of your speaker takes approximately two hours to charge when completely drained.2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off when your unit is fully charged.Understanding the LED Status LightsWhen Charging Your SpeakerSolid red LED = ChargingNo red LED  = Charge CompleteWhen Pairing Your Speaker to a Bluetooth Audio SourceRapid blinking blue LED: Bluetooth not connected. (Ready to pair.)Solid blue LED: Bluetooth connected.Pairing Bluetooth Devices to Your SpeakerIn order to pair your Bluetooth audio device to your Bluetooth Speaker for the first time, follow the steps below:1). Make sure your Bluetooth audio source is held within three meters of your speaker.2). Press and hold  the “    ” switch on your speaker to power onThe LED light will blink blue to indicate that you have entered pairing status.3). Go to the Bluetooth Manager of your Bluetooth audio source. Please refer to the User’s Manual of your Bluetooth audio source for more information.4). Search Bluetooth devices and select “B18”.5). Once paired, the blue LED light will  be solid  and you can use your speaker to listen to audio from you Bluetooth sound source. Using the Hands-Free FunctionWhen an iPhone or other smartphone is connected to your speaker follow the steps below to take calls hands-free.1. Press“    ”to pick up the call.2. Press and hold“    ”for 2 sec to reject the call.3. During a call: Press“    ”again to hang up the call.TroubleshootingThe speaker doesn’t connectto device Speaker needs to be connected/re-paired todeviceA tone is heard every fewsecondsSpeaker needs to be chargedThe speaker will not power on Speaker needs to be chargedThe speaker doesn’t controltrack(s)/volumeSpeaker needs to be in Bluetooth mode forfull control The speaker distorts at highvolume The devices’ volume needs to be lowered Bluetooth connection distancecannot reach to 32ft. Avoid operating the Bluetooth speaker in areas of strong electromagnetic interference,such as near indution cookers,large power fans,motors etc.Move the speaker closer to Bluetooth device.Fully charge the speaker and try again.Problem Solutionmodel name:HY-EU-AQDSC,HY-EU-AQDSC-BLK,HY-EU-AQDSC-BLU,HY-EU-AQDSC-REDManufacture:DGL Group LTD.FCC Caution.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used inportable exposure condition without restriction.

Navigation menu