DGL Group H1 HYPE - HOVER1 - UL APPROVED ELECTRIC BALANCING SCO User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3449103
Application ID	FxryxI2VpzmhBZQ6yOw6qg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	416.11kB (5201314 bits)
Date Submitted	2017-07-04 00:00:00
Date Available	2017-07-04 00:00:00
Creation Date	2017-05-17 13:59:14
Producing Software	Adobe Acrobat 11.0 Image Conversion Plug-in
Document Lastmod	2017-05-17 13:59:24
Document Title	User Manual
Document Creator	Adobe Acrobat 11.0

Back
mph
it:
ELECTRIC SCOOTER
OPERATION MANUAL
HY-H1
'III
Size: 124x2i5mm, i57gSIJZtIEI, Elifi: 4C, SlJZfiElilr'irlJ, ”zit—TEETH
AWARNING!
PLEASE READ THE USER MANUAL THOROUGHLY.
LOW TEMPERATURE WARNING V
Low temperature will affect the lubrication of moving parts inside the
Hi scooter, increasing internal resistance. At the same time, in low
temperatures, the discharge capacity and the capacity itself of the
battery will be significantly decreased.
- The owner shall allow the use and operation of the unit after a
demonstration that such operators can understand and operate all
components of the unit before use.
INTRODUCTION
The Hover-l H1 is a personal transporter. Our technology and
production processes are developed with strict testing for each
OPERATING PRINCIPALS
The device uses digital electronic gyroscopes and acceleration
sensors to control balance and motion. depending on the users
center of gravity. The device also uses a control system to drive the
CONTROLS AND DISPLAY
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
SMARTPHONE APP
Your HT is an App-enabled scooter that works with most mobile
devices. You must download the Hover-i app in order to change
2) DASHBOARD
Before allowing you to access the dashboard, a safety screen will
popup for 3 seconds. Please review the safety notes in this screen
while the dashboard loads. The dashboard will appear as shown
below.
0,0 mph
Sulvy tin.
3) CONNECT
Press “Connect" to have the App begin scanning for any Hover—l
devices. Your Hi must be powered on and your smart phone's
Bluetooth must be enabled. If your Bluetooth is not enabled on your
smart phone, the App will remind you to enable it.
- Hardware/Software Version 7 Display the hardware and software
versions of your Hl , These fields will only appear when connected to
your Hi scooter.
7) HEADLIGHTS \
Press “Headlights" to set a custom color and brightness for your Hi '5
Path Illumination Lights. Simply choose your desired color from the
color wheel. Slide the "Brightness" bar to adjust brightness. For your
Failure to follow the basic instructions and safety precautions listed in - Do not use if you have heart conditions such as congjestive Hover—l scooter. Driving without following the contents of this manual motors that are located within the wheels. The device has a built—in TURNING YOUR DEVICE 0_N/OFF _ certain features of your H1 such as headlight colors and skill mode. 2 mm“ D m m . Diagnosfics _ Run a diagnostic check on your Hi and stay infomed convenience. 4 basic COIOTS have 0'50 been set 05 presets below the
the user manual can lead to damage to your device, other property Do hoj ride jhe H1 Violenfly in low jemoerojwes around or below 32° heart failure, too low heart rate. or others. If you are unsure. please may lead to damage to your device, or may cause bodily injury, inertia dynamic stabilization system that can help assist with balance Power On: Take your devtce 00? 0f the box and place IT “01 on 0 level w 9 Once scanning is complete all detected Hover-l scooters will display of any hardware, software and electrical issues that may need to be brightness bar.
damage, serious bodily injury, and even death. F [0° C) check with your doctor before use. when moving forward and backwards, but not while turning. surface. Press the power button [located on the rear Of YOU’ devtce) Please download the App from either the App Store or download ‘1 z ‘3 "“ F" - l' j P th I j b tt‘ j - 'th I d th PIN addressed.
' Th' I , d - d y - jh - f j- d f th once. Check the battery LED Indicator [located in the center of your U — in 0 '5 « ress e 55 cc U 0’7 0 PG" W' a SCOO er an U59 e
is manua is estgne a give you e in orma lon you nee or e d . Th b ft . d' t 1. ht h la b It . d' 1' th d . the App from the Google Play Store. v: u “000000”, if multiple Hover-l scooters appear continue attempting to
Thank you for purchasing the Hover-l Hi Electric Scooter. Please read Doing so may increase the risk of mechanical fci|ures of the scooter, - Persons with head, back. or neck ailments or prior surgeries to safe operation and maintenance of your new Hi. Please read it TIP eTo increase your stability, you must shift your weight in order to . eV'CeI' de a eryln “30 0' '9 5 0“ e ‘ "" 'Cc' ““9 e ”'96 s“ ('3 I go." 1045 E a pair until yourHi is paired ' 5) SKILL/SAFETY MODES _ _ «It
all instructions carefully before using and retain this manual for future which may jeod 10 damage jo your device, other property damage. those areas of the body are not recommended to use this device. thoroughly before riding your H i. overcome the centrifugal force dun'ng turns, especially when ‘5 powere 0” u- E ' Cycle between 3_ different skill modes. Each modefhos a different top ':I_:
use and reference, - - ' - entering a turn at higher speeds. _ I rump"... .. u: . . . j, ,, , speed and sensitivtty. The mode Will only change I you are not using
senous badly “my and even decm - Persons with any mental or physical conditions that may make PACKAGE CONTENTS Powe'Ofl' P'essme ”Nahum" once‘ . App smfe I 2 5’ > figcié’fi‘fg'rlhfsr§°iiri°§'d xihd'fl‘r’h comemd In blue. You YOU'HI same" 2
I This manual applies to the Hover-l Hi Scooter. sAFEfV INSTRUCTIONS them suceptible to injury or impair thir physical dexterityor ' Hover-l HI Electric Scooter A WARNING MAT SENSOR Y Q 9 DD V A . B inner M d This m d i r mm rid d f r first tim H v r l 3
_ _ g - Keep the device away from heat sources, direct sunlight, humidity. mental capabilities I0 recognize. understand 00d perform Cf" 0f ' 3‘5"" Charge Cable There are four sensors under the foot mats on your H1 scooter. When scoZTer users Tn ieI'tIS modeothee :erTstiTiT/it aTtd t: s0 eed areeveo 12w “'l
I - In orderto avord dangers that are caused by coliisrons,folls.and loss and prolonged exposure jo water. the safety instructions and to be able to assume the hazards inher- - Operation Manual A"Y HI SCOO‘e' "10' does ”0’ work the user hep: off the scooter mats. it will automatically initiate USING THE APP HDv—R-I ' ' V p p ry ' I
of control, please learn how to ride the H1 safely. ent in unit use . [22.041b/ 10 kg) p’°Pe"V can ”use you '° '95s c°”"°‘ 5e|f_co|jbrofion Launch the app from your device, you will be directed to the intro " 7: , _ ,
_ t t . 'f'th t . t and tall. inspect the entire device - page. You may register your H1 by pressing the thegismfionuy You - Intermediate Mode 7 This mode is recommended for users that are
_ g _ Do not opera-e he devtcel I as been exposed to wo er. mots are thoroughly before eyery ride. and do _ > _ 1. 1 th d ho a b . "Sk' ., comfortable usrng Hover7i scooters but are not ready for full speed
' YeUheGl" [Zorn operating SKINS bY reading the PTOdUC' manual and or any other liquids to prevent against electric shock. explosion NOTES' not ride it until any problems have when "ding the SCOOTeE Y0U mustensure YOU are stepping on the TOO? may con inue D e as oar ypresslng “3 ' 5 8 and extra sensitive controls in this mode the sensitivityand top Speed 8)GPS
W0 C mg VI eos. ' ' I If i th ' . . t .D T T i d Th f T . f I _ _ _ _
Always wear a properly fitted helmet that and/or "HWY 0 yourse and damage 0 e devtce In this manual. the above symbol with the word "NOTES" indicates been °°”e°'ed' mo 5 o no 5 ep ors an on any 0 er area 0 your scoo er Please note, we encourage you to register your H1 scooter, For this l.C:nn:ct Your Hin-go connyecjfto ydlhrll'tl thrOUgh “9:9:an 0" hDUfT E Z are moderate. Press “GPS” to open a navtgation screen that pin—paints your exact
complies with CPSC or CE safety standards - This manual includes all operating instructionsond precautions, and . Do not use the device if it has been dropped or damaged in any instructions or relevant facts the user should remember prior to using Do not put items on the foot mats. Doing so WIII make the H1 turn on. purpose, the "TWO page W'" continue to Show every time the APP !5 :hna p onehlprress Hgnnec t. (ix/”bl I5 area y pal e ' '5 pa 0 5 E , Ex ert Mode _ This mode is recommended for eye do Hover-1 location. From the moment YOU_ 9'955 ”SIGIT": It begins recording your
when you ride your bicycle. users must read it carefully and follow the instructions. way the device. SP CIFIC ATI ON and increase the probability 0, collision and cause injury to people, launched it registrattonhas not been completed. Once registration is e screen W' 5 0‘” onnec e '“ ue. U m scooFIer sers In th'S mode the sens’t' y and to S eedryareéet to the iroyoi route‘ Once you press “Finish". your route is saved in the App.
I riders or damage the device completed, the APP W'" open directly to the d°5hb°°'d- . . . , , U ' . I ’ I M y p p Press the bar icon, in the top right corner of your screen, to view all
- All users are responsible for any consequences caused by violating R - t I t - I ' 1 h lo I o ,f o o A C AUTIONI Model' HY Hi I I 2’ Settings ' Press the gear icon to UdIUSI settings. maxtmum setting, saved travel routes
- epairs o eec nca equrpmen s ou ony e e orme a . ' j '
warning contents or prompt operations. HypeW can not be held qualified electrician Improper repairs may place thFe user at seriIouS . Net Weight: 22.04 lbs (10kg) I) REGISTRATION , , , . 3 . . . . . Beginner
liable. risk ' In this manual. the above symbol with the word “CAUTION" indicates Load: 44-265 lbs (20120 kg) BATTERY INDICATOR Complete the form by‘entenng your information to register your Hi, 3, Speed - The digital spedometer displays your speed in miles per By selecting one 01 the saved routes. you can view the details. Press
4 a hazardous situation which. if not avoided, can cause minor or Max Speed: Up to 10 mph [16.1 km/h) The display board is located in the middle of the H1 scooter. legémrgcgmfghggmfiis infgfiggflregnfigdjoingjg‘gfifl rcegz‘sfigfigfi hour. 4) SETTINGS "..." to share or delete the route,
Correct Fitting: MENTION . . , ' Do not puncture 0' harm the exterior surface 0f the DTOdUCt in OTIY moderate injury. Max D'S‘Pr‘ce Range: Up to 9 miles “4‘48 km) - - - - - form, the safety, legal and privacy disclaimers will need to be 4. Change Mode - Change safety/skill levels and Hi sensitivity. Press the gear icon to change settings for your H1. Intermediate Expert — _ — —
1 Use onl the su lied char er wrth this scooter Max Incline Angle‘ 15° ' Green LED Ilght indicates the devrce ‘5 charged above 50 percent. . .
Make sure your helmet ‘ y pp 9 ' WQY- . , . ‘ . , - - - - revtewed and accepted before movtng on to the dashboard, Once , _
covers your forehead Charger Manufacturer: | Minimum Tumlng Radius: 0° Regime? ATI‘ICIFdITQITtSt the power: undpr 33 percenj. I OCcepted press “Next ” 5 Battery The percentage displays the remaining battery life of your - Change Vehicle’s Name 7 Customize the name for your H1 here This NOTE: Sk'" and ““er mode must be selected. The HOVET'I WI" default
- . . ~ - . _- - e r in tea es e ower is own 0 ercen or ower. ' ' 7 ' - u , ,, - -
3-152:th :ggéJO/(ASDIAN POWER CO LTD - Keep the deVice free from dust, lint, etc, AWARNING. :23: I/ygteage‘ 5|;th Ion 9 D P I d H1. name change will reflect in the dashboard and connect pages, to Beginner mode if another mode .5 not selected.
- Do not use this device for anything other than its intended use or I“ this manual the Obove SVmbO' With the word ”WARNING" acme” “9°C“: "3 A” When me LEDhghnumsrw' please Iecmrge the Emma ~ nterme rate 6, Standby Mode - Put your HI into a low-power mode when not in . Set Auto Shutdown fime-This setting allows you to seta lime foryour f’sm‘r’" ”‘er .
2. The operating temperature range of the charger is 50° F-77° F purpose. Doing so may damage the device. indicates a hazardous situation which, if not avoided, can cause Power Requirement: AC 100240V. 5060 Hz , HDVEP-T HDVEP- se Hi to shut down automaticall Standby Mode allows you to putyourHl into a low—power standby
(10.250 (3) death or serious injury Wheel Size: 6.5 Inches (16.51 cm) STATUS INDICATOR _ _ _ U ' y. state. Your Hi cannot be used while in standby. You must disable 0
_ _ _ - Tire Type‘ Non-Pneumatic Solid Trr es When the operator triggers the foot mats. the LED Status Indicatorth 0 _ . standby made before you can ride the HI. When in standby mode, Z
. . ' Th" PTOdUd '5 ”OI ° IOY‘ Keep 0‘" 0f reach OI children. . ‘_ light up, which indicates that the Hover-1 is now ready for use. 5 65 A) 6 7, Customize Headlights - Change the colors and brightness of your - FAQ. 7 Frequently asked questions and answers are shown here -| .. ,. .l ,. - S:
' ' 3' The operating temperature range Of the Hover-1 '5 324 I30 F (0450 IP Rating, IPX4 Path Illuminalin Li hts such as basic instructions and froubleshootin the button WII say Power On ' Press Power On to disable the U
IZrIofghlggIdFlgIlengsed CI- - Do not expose batteries, battery pack. or batteries installed to SERIAL UMBER Bluetooth Range: Up to 33ft , When the system has an error during operation. the status LED light will 9 g ‘ g. StUf‘ldbl’ mode. 5
p . , , excessive heat. SUCh 05 direct sunlight. 0' open flame. FEATURES/PARTS , . . Bluetooth 59.90“”- V4'0 wrfh stereo sound quality turn red [for more details see SAFETY ALERTS). HDVEP-I 8. Vehicle 7 Displays the name assigned to your H1. - Customer Service - View contact information for the Hover7l Please note if you have your "Aojo Shutdown Time" set your Hi will '—
and vulnerable to 4. Do not ride an icy or slippery surfaces. Please keep your serial number on file for warranty claims as well as 1- Fender 6- Path Illuminating nghIS UL CeTTIfiCOTIOVii UL 2272 approved customer service team turn off corn letel at the 5 ecjfied time You will be unable to ower 2
serious 'WUIY - Persons shall be advised not to allow hands. feet. hair. body parts. 9'00f 0f purchase. Your serial ”Umbef C0" be found 0* the base 0f 2' Left F°°1M°I 7- LED Light m ”D: M23695 7 KEVIn’S HDVeT I 9 10 9 Vehicle info - Swipe up from the bottom of your screen to display it back on frgm thIe A Ygu will have to h siciall ress the power 0
5. Read the user manual and warning labels before riding. h, - - - I , , ~ your Hi scooter above the holographic UL sticker 3. LED Status Indicator 8. Charge Port [Located in rear) FCC ID: 2AANZHI ' . . . . . . . . . pp._ p y y p p
CIOT lng 0" S'm'lm OTT'C e5 To come ”1 CCTVTOCi With mavrng ports, 4 Power/Battery Indicator 9 Power Button (Located in rear) Registration more information about your H1 in real time. - Terms 8. Conditions 7 Safety, legal and privacy disclaimers are here button on your Hi to turn it back on.
. . . wheels or drivetrain. while the engine is running. ' , ' , , . for reference.
6. Store the H1 in a dry, ventilated envtronment. 5. Right Foot Mat 10. Protective Chassrs Casrng B 10. GPS Tracking _ View GPS & tracking to see where you have ridden -
I I I . A V I 7 D‘ | fh I A . d h k f
7‘ When transporting the H1, avoid violent crashes or impact. 9 your hH1 and display your real time location LdedeS-ersmn lsp ay e curren pp versrori on c ec or any
For Returns, Exchanges or Service 1 For Returns, Exchanges or Service 2 For Returns. Exchanges or service 3 For Returns, Exchanges or Service 4 For Returns, Exchanges or Service 5 For Returns. Exchanges or Service 6 For Returns, Exchanges or service 7 For Returns, Exchanges or Service 8 For Returns, Exchanges or Service 9 For Returns. Exchanges or Service 10 For Returns, Exchanges or service 1 1 For Returns, Exchanges or Service 12 For Returns, Exchanges or Service 13
please call Hover7l a18447734872620 please call Hover7i at ameswmo please call Hover7l at 8447734872p20 Noose coll Hover7| 018447734&2620 please call Hover7l at B447734&2620 Ableose coll Hover7l ol 844448721,th please call Hover7l at auswzszo please call Hover7l at 6447734872620 please call Hover7i ol 84:»34872520 please call Hover7l pi momma please call Hover7l at 8447734872620 please call Hover7l at 8447734872620 please call Haver7i al ameswmo
LUETOOTH SPEAKER
The Hi has powerful built7in wireless speakers so you can play your
music while riding.
PAIRING THE SPEAKER
1. Ensure your H1 is turned off. If it is not, please turn off your Hover-1 first
before pairing.
2. Turn on your Hi and the speakers will annouce that it's waiting fora
Bluetooth" connection. This will indicate your H1 speaker is now in
pairing mode.
3. Place the H1 and the BluetoothD device to which you would like to
pair it within the operating distance. We recommend keeping the two
devices no further than 3 feet apart during pairing.
4. Ensure Bluetooth‘1° is enabled on your phone or music device, Refer
to manufacturer's instructions for how to enable Bluefooth“ on your
device.
5. Once you have activated Bluefooth” on your device, select the
option ”HY7Hi 7Speaker" from the list of available Bluetooth‘a devices.
6. If required. enter the PIN code ""000000 and confirm the entry.
7. Please note. pairing mode on the Hover—i will last for two minutes. If
no devices are paired after two minutes, the Hi speaker will
automatically retum to standby mode.
8. If pairing is unsuccessful. turn off the H1 first and repair following the
aforementioned steps.
NOTE: Once you have paired the Hi speaker with a device. the
speaker will remember this device and will pair automatically when
the device's Bluetooth® is activated and in range. You do not need to
repair any previously connected devices.
Your Hi can pair up to two multi-point devices. You can reconnect a
previously paired device without going through the pairing or PIN
process on up to two devices.
LISTENING TO MUSIC
Once the Hi speakers are paired to your device. you can stream
music wirelessly to them. Select the track you wish to listen to on your
device to listen via the speakers. All volume and track controls will be
made using your music device. Should you encounter any problems
while streaming, please refer to your device's user manual,
IPX4 WATER RESISTANCE
Ideal for both indoor and outdoor use. the HI scooter features a
water-resistant, wealherized case that protects its components from
splashing water. This ensures that the high7quality tech within the H1 is
protected while riding around outdoors & indoors. or of beaches,
poolside bashes and getting caught in the rain.
NOTE: The Hi scooter should not be subject to prolonged exposure to
water or submerged. Doing so will damage your Hi scooter and
invalidate the manufacturer's warranty.
BEFORE RIDING
It is important that you fully understand all elements of your Hl
scooter. If these elements are not used correctly, you will not have full
control of your Hi, Before you ride. or ride outside of a controlled
environment, learn the functions of the various mechanisms on your
scooter.
Practice using these elements of your H1 at slower speeds in a flat,
open area before taking the device out in public areas.
PRE7RIDE CHECKLIST
Ensure thatyour Hi scooter is in proper working order each and every
time you ride. If a part of the scooter does not function correctly,
please contact our Customer Support Center.
A WARNING
Any H1 that does not work properly can
cause you to lose control and fall, Do
not ride on Hi scooter with a part that
is damaged; replace the damaged
part before riding.
- Ensure the battery is fully charged before riding your scooter.
- it the H1 is not to be used for an extended period of time, you may
need to recharge the battery every 2 months to maintain the battery
life.
- Ensure that the screws on the front and back tires are locked firmly
before each ride.
Far RelumS. Exchanges or Service I4 Far Returns. Exchanges or Service 15
K please Call Hover7l at 8447734872620 A please call Hover7l at 8447734877620
- Please wear all appropriate safety and protective gear as
previously mentioned in the User Manual before operating your
device.
- Make sure to wear comfortable clothes and flat closed7toe shoes
when operating your device.
- Please carefully read the User Manual, which will assist in explaining
the basic wortdng principles and provide tips on how to best enjoy
your experience.
FETY PRECAUTION
The first rule in safe riding is to use common sense. An scooter is
vulnerable; it cannot protect you in a crash. against impact, or loss of
control the way driving a car can. A scooter can tip over sideways or
pitch you over the front wheel. It does not have bumpers or airbags
as a cardoes. This section is a guide of safe riding practices foron and
off7road operation. Make sure you are using your Hi scooter properly.
Different localities and countries have different laws governing riding
on public roads, and you should check with local officials to ensure
you are complying with these lawS.
Hype is not liable for tickets or violations given to riders who do not
follow these regulations.
° For your safety, always wear a helmet that meets CPSC or CE safety
standards. In the event of on accident, a helmet can protect you
from serious injury and in some cases, even death.
- Obey all local traffic laws, Obey red and green lights, one7way
streets, stop signs, pedestrian crosswalks, etc.
0 Ride with the traffic, not against it.
- lf riding with friends and multiple Hl scooterss, ride in a single file in a
straight line.
0 Ride defensively: expect the unexpected.
' Give pedestrians the right7of7way.
- Do not ride too close to pedestrians and alert them if you intend to
pass them from behind.
- Slow down at all street intersections and look to the left and right
before crossing.
Your Hover7l is not equipped with reflectors. If is not recommended
that you ride your bike in conditions of low visibility.
If you are riding your scooter in low7visibility conditions, ensure your
LED lights are turned on. and that you are wearing bright, reflective
clothing.
A WARNING
When you ride In low-visibility conditions
such as fog, dusk, or night. you might be
difficult to see. which could lead to a
collision. In addition to keeping your
headlight on. wear bright. reflective
clothing when riding in poor lighting
conditions.
Think about safety when you ride. You can prevent many accidents
if you think about safety. Below is a helpful checklist for Compact
riders.
SAFETY CHECKLIST
. Do not ride “double" with more than one adult rider on the scooter.
- Avoid riding in large groups, as this can force you to ride too close
to other riders, making it difficult to see other vehicles and road
hazards.
- Do not ride above your skill level. Ensure you have had enough
practice with all functions and features of your Hover7i,
' Do not ride too fast 7 with increased speed comes increased risk, If
you are moving at a higher speed. small bumps can turn into large
impacts, leading to a higher risk of injury if an accident occurs.
- Do not ride your scooter with any pets.
- If you are in an accident while driving your device. contact
Emergency Medical Services or 91 1 immediately for help.
- Before stepping on your device. make sure it is placed flat on level
ground, the power is on, and the Running Indicator light is green. Do
not step on if the Running Indicator is red.
- Do not try to open or modify your device. as doing manufacturer
warranty. and may cause failure to your device leading to serious
bodily injury or death.
0 Do not use the device to place yourself or anyone else and their
property in danger.
- If you and your friend(s) are driving Hi scooters together, be sure to
keep a safe distance between each other to prevent collisions,
property damage, serious injuries or even death.
- Be sure to keep you feel on the pedals at all times. Moving your
feet off your device while driving is dangerous.
~ Do not operate the device while under the influence of drugs
and/0r alcohol. If is dangerous and illegal. You can and will be
arrested for driving under the influence.
- Do not operate the device when you are restless or sleepy.
- Use your bestjudgment to keep yourself out of dangerous situations
with your device.
- Do not ride your device off of curbs, ramps, or attempt to operate
in a skate park, empty pool, or in any way similar to a skateboard or
scooter, The Hi IS NOT A SKATEBOARD.
' Do not continuously spin in place, it will cause dizziness and you will
fall and injure yourself.
' Do not abuse your device, doing so can damage your unit and
cause failure to the operating system leading to injury.
. Do not drive in or near puddles of water, mud, sandstones, gravel,
debris or near rough and rugged terrain,
' The device can be used on paved roads that are flat and even. If
you encounter uneven pavement, please lift your Hover7i over and
For Returns, Exchanges or Service 1 6 For Returns. Exchanges or Service 17 For Returns, Exchanges or Service 18
please call Hover7l at 8447734872620 Abledse call Hover7l at 8447734872620 Aplease call Hover7l at 8447734872620
past the obstruction.
- Do not ride in inclement weather: snow. rain, hail, sleek, on icy roads
or in extreme heat.
- Do not ride in or near pools or other large bodies of water.
- Bend your knees when riding on bumpy or uneven pavement to
absorb the shock and vibration and help you keep your balance. - If
you are unsure if you can safely ride on a specific terrain, step off and
Carry your device. ALWAYS BE ON THE SIDE OF CAUTION.
0 Do not attempt to ride over bumps or objects greater than V: inch
even when prepared and bending your knees.
- PAY ATTENTION 7 look at where you are riding and be conscious of
the road conditions, people, places, property and objects around
you.
- Do not operate the device in crowded areas.
- Operate your device with extreme caution when indoors.
especially around people, property, and narrow spaces like
doorways and other narrow spaces.
- Operate your device with extreme consideration for people and
property at all times.
- Do not operate the device while talking, texting, or looking at your
phone.
0 Do not ride your device where if is not permitted.
' Do not ride your device near motor vehicles or on public roads.
0 Do not climb or travel down steep hills with your device.
- The device is intended for use by a single individual, DO NOT
attempt to operate the device with two or more people.
0 Do not carry anything while riding the device.
- Individuals with lack of balance should not attempt to operate the
device.
- Pregnant women and women who plan on being pregnant should
not operate the device.
- Young children and the elderiy should not operate the device
without proper instruction and supervision.
- At higher speeds. atways take into consideration longer stopping
distances.
- DO NOT step forward off of your device.
- Do not attempt to jump on or off your device.
- Do not attempt any Stunts or tricks with your device.
- Do not ride the device in dark or poorly lit areas.
- Do not ride the device near or over potholes, cracks or uneven
pavement or surfaces.
- Do not operate your device offrood.
- Keep in mind that you are 4.5 inches (11.43 cm) taller when
operating the device. Make sure to go through doorways safely.
- Do not turn sharply, especially at high speeds.
- Do not exceed the maximum or minimum weight limits.
- Do not step on the tenders of the device.
- Avoid driving the device in unsafe places. including near areas with
flammable gas, steam, liquid. dust. fiber. which could cause fire and
explosion accidents.
For Returns. Exchanges or Service 19 For Returns, Exchanges or Service 20
please call Hover7l at 8447734872620 Aplease call Hover7l at 5447734872620
RIDING YO
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Before using your device. be sure to familiarize yourself the operating
procedures so that you can keep your device in the best condition
and ensure safety of yourself and others.
OPERATING YOUR DEVICE
Make sure the device is fully charged before your initial use, For
charging instructions. please follow details under CHARGING YOUR
DEVICE.
Stand directly behind your device and place one foot on the
corresponding foot mat (as described in the diagram below). Keep
all your weight on your back foot still on the ground. otherwise your
device will begin to move, making it difficult to step an evenly with
your other foot. When you are ready, shift your weight to the foot
already placed on the device and step on with your second foot
quickly and evenly (as described in the diagram below).
Slay relaxed and step on quickty,
confidentty and evenly. Imagine climbing
stairs, one foot, then the other, Look up
once your feet are even.
Find your center of gravity, If your weight is distributed correctly on
the foot mats and your center of gravity is level. you should be able
to stand on your device just as if you were standing on the ground.
On average, it takes 35 minutes just to get comfortable standing on
your device and maintaining proper balance. Having a spotter will
For Returns, Exchanges or Service 2]
please call Hover7l at 8447734672520
help you feel more secure. The Hover-l is an incredibly inlultlveV
device: it senses even the slightest bit of motion, so having any
anxiety or reservation about stepping on may cause you to panic
and trigger unwanted movement.
When you first begin using your device, the fastest way to move in
your desired direction is to focus in that direction. You will notice that
just thinking about which way you would like to go will shift your
center of gravity, and that subtle movement will propel you in that
direction.
Your center of gravity determines which direction you move,
accelerate. decelerate, and come to a complete stop. As
described in the diagram below, tilt your center of gravity in the
direction you wish to move.
To turn, focus on the direction you wish to turn and stay relaxed.
A WARNING
Do not tum sharply or at high speeds to
avoid danger. Do not turn or ride quickty
along slopes, as it may cause injury.
The more comfortable you get on the device, the easier you will
maneuver. Remember at higher speeds. it is necessary to shift your
weight to overcome the centrifugal force.
For bumps or uneven roads, bend your knees.
‘i
Move Backward Stop Move Forward
For Returns. Exchanges or Service 22 For Returns, Exchanges or Service 23
please call Hover7l at 8447734872620 Nlease cail Hover7l at 544734872620
/ ARGING Y
CHARGING THE DEVICE
- Ensure that the charging port is clean and dry.
- Open the charging port on your Hi scooter,
- Make sure that there is no dust, debris or dirt inside the port.
- Plug the charger into a grounded wall outlet.
- Connect the cable with the power supply (100V ~ 240V: 50, 60 Hz),
- Ensure the light on the charger is lit GREEN.
- Align and connect the 31-pin charging cable into the charging port
of the Hi.
- The charging indicator light should change to RED. indicating that
your device is now being charged,
- When the RED indicator light on your charger turns to GREEN. then
your device is fully charged.
- A full charge may take up to 2 hours,
- After fully charging your H1, unplug the charger from your device
and from the power outlet.
BATTERY CARE / MAINTENANCE
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium7ian battery
Charge Time: Up to 2 hours
Voltage: 36V
Initial Capacity: 4.3 AH
Working Temperature: 32°F 7 1 13°F
Charging Temperature: 50°F 7 77°F
Storage Time: 1 year
Storage Temperature: 74°F 7 77°F
Storage Humidity: 5% 7 95%
BATTERY MAINTENANCE
The lithium7ian battery is built into the device. Do not disassemble the
device to remove the battery or attempt to separate it from the
device.
- When charging the device. please use the enclosed 37pin
charging cable or otherwise ensure that the battery charging
conditions are met.
- Do not connect or attach the device or the battery to a power
supply plug or directly to a car's cigarette lighter.
- Do not place the device or batteries near a fire, or into direct sunlight.
Heating the device and/or the battery can cause additional heating,
breaking, or ignition of the battery inside the device.
please call Hover7l at 844--34B—2620
\For Returns, Exchanges or Service 27
- Do not continue charging the battery it it does not recharge within
the specified charging time. Doing so may cause the battery to
become hot, rupture. or ignite,
To preserve natural resources, please recycle or dispose of batteries
property. This product contains lithium-ion batteries, Local. state, or
federal laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
A WARNING
Failure to follow the safety precautions
listed below could lead to serious
bodily injury and/or death,
- Do not attempt to modify, change, or replace your battery,
- Do not use your device if the battery begins to emit odor,
overheats. or begins to leak,
- Do not touch any leaking materials or breathe fumes emitted.
- Do not allow children and animals to touch the battery.
- The battery contains dangerous substances, do not open the
battery. or insert anything into the battery.
- Please only use the charger provided by Hype'l‘.
- Do not attempt to charge the device if the battery has discharge
or emits any substances. In that case, immediately distance yourself
from the battery in case of fire or explosion.
- Lithium7ion batteries are considered to be hazardous materials.
Please follow all local, State and federal laws in regards to recycling,
handling and disposing of Lithium7ion batteries.
A WARNING
SEEK lMMEDlATE MEDlCAL A$ISTANCE IF
YOU ARE EXPOSED TO ANY SUBSTANCE
THAT IS EMllTED FROM THE BATTERY.
For Returns, Exchanges or Service 28
please Call Hover71 at 344--34872620
FCC STATEMENT
This device complies with port 15 of the FCC Rules. Operation is
subject to the following two conditions: [I ) This device may not cause
harmful interference, and [2) this device must accept any
interference received. including interference that may cause
undesired operation.
Please note that changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device. pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and. if not
installed and used in accordance with the instructions. may cause
harmful interference to radio communications. However. there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the
equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
' Consult the dealer or an experienced radio/TV technician for help.
For Returns, Exchanges or Service 29
please call Hover7i at an-owzszo
CARE & MAINTENANCE
- Do not expose the device to liquid. moisture. or humidity to avoid
damage to the product's internal circuitry,
- Do not use abrasive cleaning solvents to clean the device.
- Do not expose the device to extremely high or low temperatures as
this will shorten the life of the electronic device, destroy the battery,
and/or distort certain plastic parts.
- Do not dispose of the device in fire as it may explode or combust.
- Do not expose the device to contact with sharp objects as this will
cause scratches and damage.
- Do not let the device fall from high places, as doing so may
damage the internal circuitry.
- Do not attempt to disassemble the device.
In the event that the device does not function properly. retum it to
the store where it was purchased.
A WARNING
Avoid using water or other liquids for
cleaning. If water or other liquids enter
the Hi, it will cause permanent
damage to the internal components.
A WARNING
Users who disassemble the H1 scooter
without permission vw‘ll void the
warranty.
For Returns, Exchanges or Service 30
please call Hover-i at 844—348-2620
WARRANT
Hype‘M offers a 120 day limited warranty covering the hardware of
Hover-1W H1 Electric Scooter [referred to as “Product" here on
out), limited to those residing in the 50 US States and Canada, This
warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
HypeW warrants the Product to be free from defects in materials
and workmanship under normal use for 120 days, as sold to the
original purchaser. from the date of retail purchase by the original
end-user purchaser. A copy of the sales receipt from the date of
original purchase of the Product will be required for validity. If a
hardware defect arises and a valid claim is received within the
warranty period, at its option and to the extent permitted bylaw,
Hype‘M will:
(1) repair the hardware defect (free of charge) by using new or
refurbished parts that are equivalent to new in performance and
reliability; or (2) exchange the product (free of charge) with a
product that is new or refurbished, that is substantially equivalent
to the original product if the product sent in cannot be repaired
within a reasonable time or at a reasonable cost. This warranty is
for replacement for like-items only and does not cover items out
of production it the company no longer stocks them. When a
product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Hype1M property.
Requests cannot be made for repairs to be carried out on site. This
warranty is not assignable or transferable.
The original purchaser may call the Hover-1"“ customer service
number at 1e8447348e2620 or send an email to
support@Hover7i.com for service request. Upon Hype‘M \'s
replacement or repair of a Product under warranty, the original
end7user purchaser will have the remaining warranty under the
original warranty period (without any postponement during repair
or replacement).
Important: Do not disassemble the Product. Disassembling the
Product will void this warranty. Only HypeW or a party authorized
by HypeTM should perform service on this Product.
This warranty only covers technical hardware defectiveness
during the warranty period and under normal use conditions.
For Returns, Exchanges or Service 3)
please call Hover-i at 844--34872620
LIMITATION OF WARRANTY
Hype’M does not guarantee uninterrupted or error7free operation
of this Product. This Warranty does not apply to damages or
circumstances, such as, but not limited to:
(A) Damage that is caused by conditions. malfunctions. or
damage not resulting in from defects in material or workmanship.
These conditions include. but are not limited to, road hazard,
accidents, and improper operation or maintenance;
(B) Product has been tampered with, repaired. modified by
non-authorized personnel and/or if the product is equipped with
additional parts or accessories that are not approved for the
product:
(C) Obsolescence:
(D) Damage [accidental or other) to the Product that is cosmetic,
meaning damage that does not impact the operation and
functioning of the Product, such as without limitation to rust,
change in color, texture or finish, wear and tear, scrapes,
scratches, dents. cracks, or gradual deterioration, provided there
is no obligatory legal liability:
(E) Over-charging, or damages due to improper maintenance of
the lithium battery installed in the Product:
(F) Damage to the Product caused by war, terrorism, fire, water.
chemical. electrochemical, accident. natural disaster. intentional
or accidental misuse. abuse, neglect or improper maintenance,
use under abnormal conditions, accidental drops:
(G) Damage to the Product caused by an external electrical
fault, surge, or any electrical anomaly:
(H) Any contamination, condition or other circumstance, which
HypeTM, in its sole discretion, considers a danger to
health and safety, including, but not limited to any contact
between the Product and a biohazord, bodily fluids, infectious
materials/substance, chemicals. hazardous substances, diseases,
radiation, or other:
(I) Fraud. theft, misplacement, unexplained disappearance. or
willful acts;
(J) Marginal differences compared to the target appearance
For Returns, Exchanges or Service 32
please Call Hover-l at 844-848-2620
and workmanship provided these haveanegllgible effect on theYON CONTRACTS)? LOSS OF THE USE OF MONEY? LOSS OF
Product's fitness for use.
‘Warranties that have not been activated do not cause the
warranty period to be extended. nor do they trigger a new
warranty period. The warranty period for any replacement parts
installed ends with the warranty period for the entire product.
LIMITATION OF LIABILITY
In no event shall HypeW be liable for any incidental, indirect,
special or consequential damages or liabilities (including. but not
limited to incidental or consequential damages for loss of time,
inconvenience, loss of use of product, or any other consequential
or incidental loss) in connection with the purchase, use, or
operation of the product, HypeW is not liable for property
damage, personal injury, or death.
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE
REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL.
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AS PERMITTED BY
APPLICABLE LAW, HYPETM SPECIFICALLY DISCLAIMS ANY AND ALL
STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, AND WARRANTIES AGAINST HIDDEN OR
LATENT DEFECTS. IF HYPETM CANNOT LAWFULLY DISCLAIM
STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT
PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN
DURATION TO THE DURATION OF THE EXPRESS WARRANTY AND TO
THE REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY HYPETM
IN ITS SOLE DISCRETION. NO RESELLER, AGENT. OR EMPLOYEE IS
AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR
ADDITION TO THIS WARRANTY. IF ANY TERM[S] IS HELD ILLEGAL OR
UNENFORCEABLE, THE LEGALITY AND ENFORCEABILITY OF THE
REMAINING TERMS SHALL NOT BE AFFECTED OR
IMPAIRED,
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM
EXTENT PERMITTED BY LAW, HYPETM IS NOT RESPONSIBLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION OR PERFORMANCE OF THE PRODUCT, OR UNDER ANY
OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF
USE: LOSS OF REVENUE: LOSS OF ACTUAL OR ANTICIPATED PROFITS
(INCLUDING LOSS OF PROFITS
ANTICIPATED SAVINGS: LOSS OF BUSINESS: LOSS OF OPPORTUNITY?
LOSS OF GOODWILL; LOSS OF REPUTATION:
LOSS OF, DAMAGE TO, COMPROMISE, OR CORRUPTION OFDATA:
OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE
HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF
EQUIPMENT AND PROPERTY. ANY COSTS OF RECOVERING.
PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA
STORED IN OR USED WITH THE PRODUCT AND ANY FAILURE TO
MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE
PRODUCT. THE FOREGOING LIMITATION SHALL NOT APPLY TO
DEATH OR PERSONAL INJURY CLAIMS, OR ANY STATUTORY LIABILITY
FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR
OMISSIONS. HYPETM DISCLAIMS ANY
REPRESENTATION THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT
UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE, AND IS
UNABLE TO RECOVER ANY USER SOFTWARE OR DATA ON THE
DEVICE.
ASSERTING A WARRANTY CLAIM
I) To make use of the warranty service for hardware issues. you
must contact the Hype'M Service Center by phone at
17844-34872620 or email at support@Hover-i .com.
2) HypeW will try to diagnose and solve your problem. If it is
determined that a warranty claim exists, you will be given an RMA
number [Return Material Authorization] and will be asked to send
the product to Hype‘M.
IMPORTANT: Hype'M will only accept parcels that have an RMA
number,
Please observe the following when sending the product:
1) Send the product suitably packaged with carriage and
insurance paid, Do not enclose any accessories with the product
(cables. chargers, manuals. etc.) unless the HypeTM Service
Center specifies otherwise,
2) Mark the RMA number on the outside of the package in such a
way that it is visible and cleany legible.
3) You must enclose a copy of the sales receipt as proof of
purchase.
For Returns, Exchanges or Service 33 For Returns, Exchanges or Service 3
please Call Hover7l at 8447-348-2620 Nlease Call Hover7l at 544-454872620 4
4) Please enclose a check for $49.99 made payable to “Hype \
Wireless" for return shipping.
5) Once Hype'M has received the product. it will meet its warranty
obligations in accordance with the warranty conditions and will
return the product to the sender with carriage and insurance
paid.
SERVICE OUTSIDE OF WARRANTY
Hype‘Mcon refuse any service claim made that is not covered by
the warranty. If HypeTM agrees to provide a service outside the
warranty, the customer will be invoiced for all repair and transport
costs, HypeW will not accept any packages that have not first
been approved by Hype‘M by means of an RMA (Return Material
Authorization).
Contact us with questions at:
support@Hover-i ,com
www,Hover-1.com
Hype Wireless
Edison, NJ 08837
8447348-2620
Affix Serial Number Label Here:
For Returns, Exchanges or Service 35
please call Hover-l at 5447734872620 1
Try staying relaxed and focus on finding
your center of gravity to maintain full
control of your H1 scooter.
Dismounting your device can be one of the easiest steps. yet when
done incorrectly, may cause you to fall. To property dismount, from a
stopped position, lift one leg up and set your foot back down on the
ground (STEPPING BACK). Then step off completely as described in
the following diagram.
ll . e eflefifill
O I 0
Make sure to lift your leg completely off
the foot mat to clear the device when
stepping back to dismount. Failure to
do so may send the Hover-1 into a
tailspin.
lftheHi isnotplacedonalevelsuface.an
diam wti sound and the waning indicator
wlignitupandpreventtheHi frornmaving.
PiaoeiheHl onaleveisufoceandtryrb’ng
taga'n.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety, Please do not
exceed the limits listed here in the manual.
- Maximum Weight: 264 lbs
- Minimum Welght:441bs
- Maximum Speed: i0 mph
A WARNING
Overweig'tt eerilon on the device may
'wemeposfiv MUWW.
To prevent injury, when max speed is
reached. the Hi will beep to alert the user
and tilt the rider slowly back.
OPERATTNG RANGE
Please notice the Hi can travel a distance up to 12 miles on a fully
charged battery in ideal conditions. The following are some of the
major factors that will affect the operating range of your device,
- Terrain: A smooth, flat surface will increase your driving distance,
while driving uphill, as well as rough or uneven terrain will reduce your
distance significantly.
- Weight: The weight of the user can affect driving distance, a lighter
user will have further range than a heavier user,
- Ambient temperature: Please tide and store the device under
recommended temperatures. which will increase driving distance:
battery life, and overall performance of your device.
- Maintenance: Reasonable battery charging and maintenance will
increase the distance. Overcharging the battery can reduce range.
- Speed and Driving Style: Maintaining a moderate speed will
increase your distance: while traveling at high speeds for extended
periods, frequent starts, stops. idling. along with frequent
acceleration and deceleration will reduce your overall distance.
If the scooter is found to be unbalanced. you can follow the below
steps to calibrate it.
- In order for the balance calibration system to work properly. please
place the scooter on a flat horizontal surface.
- Press and hold the ON/OFF button for at least 5 seconds until the
scooter buzzes.
- The LED light on the deck will begin flashing red.
- The red LED light on the deck will first start blinking and later stay on
for a few seconds more. after that lights will turn off automatically. at
this point please press the ON/OFF button to completely switch off
the scooter.
- Press the ON/OFF button the switch the scooter on again. At this
point. the calibration process will be complete.
For Returns, Exchanges or Service 24
please call Hover7i at 5447734872620
BALANCE & LIBRATION
FETY LERTS
While riding your Hi scooter, if there is a system error or illegal
operation performed with your device, the system cannot enter
self7balancing mode, so the device will prompt the user in a variety of
ways.
You \NIII notice the Running indicator Light will turn RED and you will
hear a beep sound alerting you to take precaution and cease
operation.
The following are common occurrences where you will hear the
Safety Alerts, These notices should not be ignored, but appropriate
action should be taken to correct any illegal operation, failure or
errors.
- Prohibited riding surfaces (uneven. too steep, unsafe, etc.)
- When you step on the device. if the platform is tilted more than 10
degrees forward or backward.
- Battery voltage iS too low.
- The device is still charging.
- During operation, the platform self initiates to tilt due to excess
speed.
‘ Overheating, or motor temperature is too high,
- The device has been rocking back and forth over 30 seconds.
- System enters protection mode, the alarm indicator will light up
and buzzer will alarm (this typically occurs when the battery is about
to run out of power).
- If the platform is tilted forward or backward more than 15 degrees.
device will power off,
- If any or both tires are blocked. the device will stop after 2 seconds.
- when the battery level has depleted below protection mode, the
device engine will power off after 15 seconds.
For Returns, Exchanges or Service 25
please call Hover7i at 8447734872620
- While sustaining a high discharge current during use (such as driving
up a steep slope for a long period of time), the device engine will
power off after 15 seconds.
A WARNING
When the H1 turns off during a Safety
Alert, all operation systems will halt. Do
not continue attempting to ride the HI
when the system initiates a stop. Turn
your Hover-i off and back an to unlock
it from a Safety Lock.
For Returns, Exchanges or Service 26
please call Hover7l at 8447734872620

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:05:17 13:59:14+08:00
Creator                         : Adobe Acrobat 11.0
Modify Date                     : 2017:05:17 13:59:24+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:05:17 13:59:24+08:00
Creator Tool                    : Adobe Acrobat 11.0
Format                          : application/pdf
Document ID                     : uuid:eaa854fb-7b09-4964-97b3-7e89e925c24f
Instance ID                     : uuid:5038c7b0-a33c-4cb3-a26a-01afbdecbe69
Producer                        : Adobe Acrobat 11.0 Image Conversion Plug-in
Page Count                      : 1

EXIF Metadata provided by EXIF.tools