DIGI SINGAPORE IFT22132 INFOTAG 2.13 User Manual
Teraoka Weigh-System Pte Ltd. INFOTAG 2.13 Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2748137 |
| Application ID | JFM4rSoi8pEM4lMl+vH+dw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 56.16kB (701949 bits) |
| Date Submitted | 2015-09-15 00:00:00 |
| Date Available | 2015-09-15 00:00:00 |
| Creation Date | 2017-09-14 19:49:00 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-09-14 19:49:00 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | OngSG |
SERVICE MANUAL IFT-22132 INFOTAG 2.13 (BW/R) IFT-22132 COPYRIGHT © 2010 TERAOKA WEIGH-SYSTEM PTE LTD Table of Content i) Notice ................................................................................................................................................. 1 ii) Safety Information .............................................................................................................................. 2 iii) Safety Regulations ............................................................................................................................. 2 1. General ............................................................................................................................................................. 5 1.1 Model Specification ............................................................................................................................ 5 2. Dimension ........................................................................................................................................................ 6 3. IFT-22132 Setup Diagram & Spec Setting .................................................................................................... 7 3.1 Overall Layout and Label design ......................................................................................................... 7 3.2 Exploded View ....................................................................................................................................... 8 3.3 Replacement of Info Tag Battery.......................................................................................................... 9 3.4 Button Cell Specifications ...................................................................................................................... 9 3.5 ESL Attachment (Refer to ESL Attachment Catalogue) ....................................................................... 9 3.6 Product Handling of Info Tag ............................................................................................................... 10 4. Revision Records .......................................................................................................................................... 11 i) Notice DIGI® The material contained in this document is proprietary and for information only and is subject to change without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from misinterpretation of any procedure. Screen displays, operating procedures and supporting features might vary with different software version releases. This document shall not be reproduced whether in part or whole without the written consent from Teraoka Weigh-System Pte Ltd. Teraoka Weigh-System Pte Ltd 4, Leng Kee Road #06-01 SIS Building Singapore 159088 ii) Safety Information The operator of the equipment shall comply with the safety and warning indications and procedures outlined in this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with these requirements. Repair and servicing of product, shall only be carried out by trained and qualified personnel. Disclaimer: Specifications are subject to change without notice. All dimensions shown are approximate. Please be aware that Teraoka has indicated that its hardware and software used in the product may require additional updates in the future as our product is continually under development. The need for such updates most likely applies to the Printer software. CAUTIONS: FOR PLUGGABLE EQUIPMENT, THAT THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. POUR LE MATÉRIEL RACCORDÉ PAR PRISE DE COURANT, LE SOCLE DE PRISE DE COURANT DOIT ÊTRE INSALLÉ À PROXIMITÉ DU MATÉRIEL ET DOIT ÊTRE AISÉMENT ACCESSIBLE. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE. POUR NE PAS COMPROMETTRE LA PROTECTION CONTRE LES RISQUES D’INCENDIE, REMPLACER PAR UN FUSIBLE DE MÊME TYPE ET DE MÊME CARACTÉRISTIQUES NOMINALES. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS IL Y A DANGER D’EXPLOSION S’IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE OU D’UN TYPE RECOMMANDÉ PAR LE CONSTRUCTEUR. METTRE AU RÉBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU FABRICANT. iii) Safety Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IDA Compliance Statement: (Singapore) This equipment registered to comply with IDA (Info-Communications Development Authority of Singapore) Standard under Dealer’s Class License. Actual size 9mm (H) x 17mm (W) Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual. Cet équipement est conforme avec l'exposition aux radiations IC définies pour un environnement non contrôlé. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spécifiques pour satisfaire la conformité aux expositions RF. Pour respecter les exigences de conformité d'exposition RF IC, s'il vous plaît suivez les instructions d'utilisation documenté dans ce manuel. For Taiwan 警語： 第十二條→經型式認證合格之低 率射頻電機，非經許可，公司，商號或使用者均不得擅自變 更頻率 大 率或變更原設計之特性及 能 第十四條→低 率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時， 應立即停用，並改善至無干擾時方得繼續使用 前項合法通信，指依電信法規定作業之無線電通信 低 率射頻電機須忍受合法通信或工 業 科學及醫療用電波輻射性電機設備之干擾 IFT-22132 Service Manual 1. General 1.1 Model Specification Model IFT-22132 Dimensions (in mm) Infotag 2.13 (BW/R) LCD Size Display Window LCD Resolution Weight 26g approx. Power Source DC Cell Button Battery 3.0V x 1 Operating Temperature 0 °C to + 40 °C Humidity 85% Max. Non-condensing IP Rating TBA Housing material PC plastic casing, PC battery cover Battery Specification Type Nominal Voltage Life Time Weight 65.4 (L) X 39.0 (H) X 15.3 (W) 59.2mm x 29.2mm x 1.05mm 50.4mm x 25.6mm 212 x 104 dots (Dpi: 111) CR2450 (Cell Button Battery) 3.0V 5 years (2 update/day) 6.6g approx. IFT-22132 Service Manual 2. Dimension IFT-22132 IFT-22132 Service Manual 3. IFT-22132 Setup Diagram & Spec Setting 3.1 Overall Layout and Label design IFT-22132 Front View Back View IFT-22132 Service Manual 3.2 Exploded View IFT-22132 Front Cover LCD & PCBA Back Cover Battery Battery cover IFT-22132 Service Manual 3.3 Replacement of Info Tag Battery Location of Battery in Info Tag Battery Cover Battery Info Tag i. ii. Pull off the battery cover from back of the Info Tag. Replace the new battery. (Ensure the Battery polarity is correct) Caution: Dispose of the Battery according the Safety Guideline. i. ii. iii. iv. v. Avoid placing the battery in reverse polarity. Do not heat or dispose of fire. May burst or release toxic material. Do not charge. Do not short circuit. Do not solder the battery directly. 3.4 Button Cell Specifications 3.5 ESL Attachment (Refer to ESL Attachment Catalogue) For all information about the ESL Various Attachment type, function, installation etc. Please refer to ESL Attachment Catalogue http://www.digiesl.com.tw/digiesl/sys4.asp http://www.teraoka.com.tw/digi/article.aspx?id=77 http://www.digiesl.com/ IFT-22132 Service Manual 3.6 Product Handling of Info Tag Handle product with care. Do not expose product to corrosive chemical solution, any organic solvent acidic or alkaline. If cleaning is required, wash only water or mild soap solution. Do not attempt to disassemble, apply force or heavy load to the product. No user serviceable parts inside. 10 IFT-22132 Service Manual 4. Revision Records Serial No. Date Edition Status 001 JUNE14 00 Description of Changes First Release 11 Software Version Remarks V0.01 Tentative Edition
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : OngSG Create Date : 2015:09:08 17:09:02+08:00 Modify Date : 2015:09:08 17:09:20+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : OngSG Creator Tool : Microsoft® Word 2010 Metadata Date : 2015:09:08 17:09:20+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:c10210f7-8dce-4979-b389-ae2e44077184 Instance ID : uuid:bf0f9f6f-2e36-42ff-96b6-dc60241acd7f Page Count : 13EXIF Metadata provided by EXIF.tools