DIGI SINGAPORE TRKRF02 RF_CC2510 Module User Manual DI 300SS Service Manual

Download:
Mirror Download [FCC.gov]
Document ID	966348
Application ID	Gi3fE/E5J4sIVrrvM3SKrA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.86kB (173271 bits)
Date Submitted	2008-07-07 00:00:00
Date Available	2008-07-07 00:00:00
Creation Date	2008-07-04 16:48:42
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-07-07 13:06:12
Document Title	DI 300SS Service Manual
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	pe-servicemanual

USER MANUAL
WIRELESS RF DEVICE
TRK-RF-02
Edition 01
COPYRIGHT © 2008 TERAOKA WEIGH-SYSTEM PTE LTD
Table of Content
i)
Notice ..............................................................................................................................1
ii)
Safety Information ...........................................................................................................2
iii)
Safety Regulations ..........................................................................................................3
1.
General ..............................................................................................................................................................5
1.1 Product Features.............................................................................................................5
1.2 Operating Specification ...................................................................................................5
2.
Dimension .......................................................................................................................6
3.
Label Information.............................................................................................................7
4.
Interface ..........................................................................................................................8
5.
Revision Records............................................................................................................................................9
i)
Notice
DIGI®
The material contained in this document is proprietary and for information only, and is subjected to change
without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from
misinterpretation of any procedure.
Screen displays, operating procedures and supporting features might vary with different software version
releases.
This document shall not be reproduced whether in part or whole without the written consent from Teraoka
Weigh-System Pte Ltd.
Teraoka Weigh-System Pte Ltd
4, Leng Kee Road
#06-01 SIS Building
Singapore 159088
-1-
ii)
Safety Information
The operator of the equipment shall comply with the safety and warning indications and procedures outlined in
this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with
these requirements.
For continued protection against fire hazard replace only with battery of same rating and type.
Avoid overloading the product beyond its rated maximum capacity
Trained and qualified personnel shall only carry out repair and servicing of product.
Disclaimer:
Specifications are subject to change without notice. All dimensions shown are approximate. Please be aware
that Teraoka has indicated that its hardware and software used in the product may require additional updates in
the future as our product is continually under development. The need for such updates most likely applies to the
Printer software.
-2-
iii)
Safety Regulations
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
-3-
IMPORTANT NOTE: In the event that these conditions are not met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID could not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such
that 20 cm may be maintained between the antenna and users (for example: by maintaining 20cm
between the final end device and users). The final end product must be labeled in a visible area with
the following: “Contains TX FCC ID: SUFTRKRF02”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this
module.
The end user manual shall include all required regulatory information/warning as show in this manual.
-4-
TRK-RF-02 User Manual
1.
General
The module design is based on the CC2510 RF transceiver with 8051 core built in from Chipcon. It
implements a proprietary communications protocol streamlined to lower cost and power consumption.
The TRK-RF-02 module design consists of the CC2510 with 8051 core built in (up to 32k internal
flash), and surface mount LTCC chip antenna. The module will be FCC and CE certified for fast and
simple integration into end applications. Teraoka can modify the firmware to accommodate specific
application requirements. This module may be integrated into a wireless application which operates in
2.4G ISM frequency band and requires low data rate /low power consumption.
1.1
Product Features
Model
TRK-RF-02
Dimension (in mm)
36.5(L) X 29.9(W) X 4.2(H)
RF Standard
EN300440
Modulation
MSK; FSK
Frequency Band
2.406 GHz – 2.480 GHz
Radio Operation Channel
1 to 76
The RF Frequency of channel k is given by
Fc = 2405+(k-1) MHz, k=1,2…76
Data Rate
Up to 500 kbps
Radio Range
Up to 100m, L.O.S
Transmit Power
0dBm (max)
Receiver Sensitivity
-105dBm (typical), PER = 1%
General purpose I/O
30
Voltage
DC 3.0V ( +2.7V ~+3.6V)
Current
35mA (typical), standby: <5uA
Operating Temperature
-20 °C to 50 °C
Storage Temperature
-40 to +85° C
Humidity
95% max non condensing
1.2
Operating Specification
-5-
TRK-RF-02 User Manual
Dimension
-6-
TRK-RF-02 User Manual
3.
Label Information
-7-
TRK-RF-02 User Manual
4.
Interface
Interface pin assignments
10
11
12
13
14
15
GND
GND
GND
VDD
VDD
RESET_N
MISO/P1_7
MOSI/P1_6
SCLK/P1_5
CSN/P1_4
TIMER3_CH0/P1_3
P1_2
TIMER4_CH1/P1_1
P1_0
A0/P0_0
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
A1/P0_1
CSN/A2/P0_2
SCLK/A3/P0_3
MOSI/A4/P0_4
MISO/A5/P0_5
A6/P0_6
A7/P0_7
P2_0
DD/P2_1
DC/P2_2
XOSC32_Q1/P2_3
XOSC32_Q2/P2_4
GND
GND
GND
Notes:
1. The I/O pins are connected to the external interface ports directly.
2. The voltage level is TTL high/low voltage level.
-8-
TRK-RF-02 User Manual
5.
Revision Records
Serial
No.
001
002
Date
Apr ‘08
Jul ‘08
Edition
Status
00
01
Description of Changes
Software
Version
Remarks
Tentative Edition
Revised Manual Information To the End
User
-9-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Destination                     : John Wong
Company                         : Teraoka Weigh-System
Source Modified                 : D:20080704084739
Create Date                     : 2008:07:04 16:48:42+08:00
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2008:07:07 13:06:12+08:00
Metadata Date                   : 2008:07:07 13:06:12+08:00
Document ID                     : uuid:d4ecc359-0339-4bac-89ca-caf993e37bdd
Instance ID                     : uuid:8d6f7492-c3d6-4aa8-93a8-9380792b6a76
Version ID                      : 12
Format                          : application/pdf
Title                           : DI 300SS Service Manual
Creator                         : pe-servicemanual
Description                     : Service Manual
Subject                         : 
Headline                        : Service Manual
Page Count                      : 11
Page Layout                     : OneColumn
Author                          : pe-servicemanual

EXIF Metadata provided by EXIF.tools