DIGILINK GROUP DW-007PLUS Fitness Band User Manual Smart Bracelet

Download:
Mirror Download [FCC.gov]
Document ID	2690106
Application ID	1URo2AKvN5pQ+gWUfyxHPg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.44kB (368059 bits)
Date Submitted	2015-07-23 00:00:00
Date Available	2015-07-24 00:00:00
Creation Date	2015-05-04 15:51:15
Document Lastmod	2015-07-22 14:32:15
Document Title	Smart Bracelet User Manual
Document Creator	WPS Office 个人版
Document Author:	user

User Manual
【Compatibility】
The Smart Wristband only supports the following selected mobile devices:
IOS:
IOS must be IOS7.0 or above, Bluetooth 4.0; Such as: iPhone 4S, 5, iPod touch5,etc.
Android: Android must be Android4.3 or above, Bluetooth 4.0; Such as: Samsung S4, Note3,etc.
【Function Icon】
Time: 00:00
Steps :
Distance:
Calories:
Alarm clock:
Sleep monitor:
Move Alert:
Call ID Display:
Message Push:
Bluetooth:
Autodyne：
Bluetooth broadcast:
【Quick Start Guide】
1.
Charge:
Please charge the bracelet for 30mins before using. Pull out the host as below picture, Insert the host to a 5V/1A USB port for
charging. The red indicating light stops flashing when it is full charged for 30 minutes.
2.Install APP:
Go to App store or google play store, download APP: “Zeroner” and install it. To use Zeroner APP, make sure your mobile device
connected with internet via 3G,4G or wifi.
3.Account set-up:
Open the “Zeroner” App. Log in if you have an account, or register a new account.
4.Bracelet Operating Instructions:
You can use the bracelet by “gesture control” or “touching” the screen.
Gesture control:
It is convenient to check the time by “wrist gesture”.
Keep the bracelet screen horizonal
Then turn wrist over
The
bracelet
will
be
turned
automatically, then time shows up.
“Touching”
Function
Operation
Turn on
Long press the bracelet screen
Light up the
Click the screen or turn the wrist over
screen
Turn off
Slip left and right to the interface
, then switch to
, then long press the screen
to turn off the device
Switch function
page turning
Confirm
Slip left and right
Click the screen
Long press the screen
on
Note:Function may be changed and upgraded according to the bracelet hardware update. For further information, please refer to
“Help” option on APP.
5.Pairing:
Keep your phone with bluetooth and WIFI “on” for this step.
1). Log in the App Zeroner, show the
2).Double press the bracelet touch
main page. Tap the top left corner
screen ,the radar icon “ ”shows up on the
button or slip the screen from left to
bracelet,Tap the button【Searching device】
right, and click【Device Connection】
on APP,select your right ID from the device
list, and wait for 1-2 seconds
3).Android device will pop up【Device
4).IOS device will pop up【Pair Device
pair request】,choose “confirm”, and
Success】,【Bluetooth Pairing
finish pairing.
Request】,click ”pair”,
and finish
paring.
If the pairing pop-up do not appear within 1 minute,repeat the above steps.
6.SYNC Data
The bracelet SYNC data automatically after connected with phone by APP(Zeroner), the bracelet time will be calibrated same as the
time of phone. SYNC data includes:steps,calorie,distance. You can check if the data SYNC is completed successfully on the APP. It will
take 1-2 minutes to SYNC data for first time. SYNC data can be done manually by clicking the refresh button on APP too.
7.Sleep monitor
Start Sleep Mode：the bracelet will distinguish if the wearer is sleep or awake everyday time 20:00 to 09:00, if the wearer sleep, then
the bracelet will start sleep monitor mode automatically, the icon
show up.
Exit sleep mode ： when the wearer awake and move around 1 minute,the bracelet exit sleep monitor mode automatically,the
bracelet will exit sleep mode and back to time display.
8.Reset the bracelet
Slip left and right to the interface
, then switch to
, then long press the screen to turn off the device
9.For more functions, please download APP “Zeroner” to use.
【FAQ】
1.
Q:When connected with App, the data SYNC is finished but the bracelet time display is still incorrect。
A: Reset the bracelet and try data SYNC again
Q: After the bracelet connected with APP,why the bracelet didn’t show call ID when the call coming?
A: Android Phone: After connected with bracelet with APP, please allow “zeroner” to visit calls,SMS,contacts and keep
“Zeroner” running in background.If there are security software on your phone,set the software “zeroner” as “trust”.
IOS: If your phone is iphone,please restart your phone and connect the bracelet again.When connect please wait until the phone
pop up “bluetooth pairing request” and click “pair”,the call ID display function comes.
2.
Q:The bracelet icon shows the bluetooth was connected,but the APP cannot SYNC data?
A:Generally it is caused by the bluetooth of the phone.Please switch off the APP firstly , restart the bluetooth and repair.If the above
step does not work,please restart your phone and try again.
3.
Q:Why my bracelet lose connection with my phone frequently?
A:Please check if your phone or other security software sets “Zeroner”as trusted APP or not.if not,pls set it as trusted and try again.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : user
Title                           : Smart Bracelet User Manual
Create Date                     : 2015:05:04 15:51:15Z
Creator Tool                    : WPS Office 个人版
Modify Date                     : 2015:07:22 14:32:15+08:00
Metadata Date                   : 2015:07:22 14:32:15+08:00
Document ID                     : uuid:77fdd6a3-16a8-4b7e-a8b2-ebe0173490d5
Instance ID                     : uuid:5113de7d-d1fe-4367-bbfd-6723c44af818
Page Count                      : 5
Author                          : user

EXIF Metadata provided by EXIF.tools