DIRT DEVIL Vacuum, Upright Manual L0408024
G+ MIMO PM01116EA L0408024
User Manual: DIRT DIRT DEVIL Vacuum, Upright Manual DIRT DEVIL Vacuum, Upright Owner's Manual, DIRT DEVIL Vacuum, Upright installation guides
Open the PDF directly: View PDF 
.
Page Count: 8
m®
OWNER'S MANUAL
Operating and Servicing
Instructions
_D
• Please read these
instructions carefully before
using your Swivel Glide®Vision®.
0Let us help you put your
cleaner together or answer
any questions, call:
1-800-321-1134(USA& Canada)
website:www.dirtdevil.com
Forquick reference,please recordyourvacuum
informationbelow.
Model #:
Mfg. Code:
(Mfg. code located on the lower backside of cleaner)
Espa#ol -p_gina E1
@1998 All rights reserved #1-113344-000
3/03
CONGRATULATIONS
You are now the proud owner of the Dirt Devil ®Swivel Glide ®Vision _, with Power You Can See'_!
You'll never buy another bag again with the unique bagless design that includes a see-through
dirt container for retrieving lost items. You'll also enjoy superior cleaning performance with 12
amps of Maximum Vacuum Power.
We are very proud of our products and hope that you are equally satisfied with their quality and
performance.
Thank you for your support of Dirt Devil ®products.
Visit our website at www.dirtdevil.com
TABLE OF CONTENTS
Feature Descriptions ................................... Page 4
How To Assemble ..................................... Page 4
How To Operate ....................................... Page 5
Hose Assembly and Tool Storage .................... Page 5
Floor/Carpet Cleaning ............................. Page 5
Above Floor Cleaning ............................. Page 5
Hands Free Edge Cleaning ......................... Page 5
Carpet Settings .................................. Page 6
How To Transport Cleaner ......................... ; ..... Page 6
Dirt Container& HEPA Removal and Replacement ............ Page 6
Belt or Brushrolt Removal and Replacement ................. Page 7
Lightbulb Removal and Replacement ....................... Page 7
Troubleshooting Guide. ................................. Page 8
LIMITED WARRANTY
Tothe consumer, F_oyalApplianceMfg. Co.warrants this vacuum cleaner to be free of defects in material or workmanship commencing upon the date of the original
purchase. Referto your vacuum cleaner carton for the length of warranty and save your original sales receipt to validate start of warranty period.
If the vacuum cleanershould become defective within the warranty period, we will repair or replaceany defective parts free of charge. The complete machine must be
delivered _ to any ROYAL®Authorized Sales & Warranty Service Station. Please include complete description of the problem, day of purchase, copy of original
sales receipt and your name, address and telephone number. If you are not near aWarranty Station, call the factory for assistance at USA & Canada:
®
1-800-321-1134. Use only genuine Royal replacement parts.
Thewarranty does not include unusual wear, damageresulting from accident or unreasonable use of the vacuum cleaner. This warranty does not cover belts, filters,
brushes, bags, bulbs or fan damage. This warranty does not cover unauthorized repairs. This warranty gives you specific legal right s and you may also haveother
rights. (Other rights may vary from state to state in the USA).
2
THIS CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
When you use an appliance, basic precautions should be followed, including the following:
• READ ALL INSTRUCTIONS BEFORE USINGTHE APPLIANCE.
•ALWAYS FOLLOWTHESE SAFETY INSTRUCTIONS.
•BRING CLEANER TO UPRIGHT POSITION WHEN USING THE HOSE AND ATTACHMENTS.
•DO NOT LEAVECLEANER UNATTENDEDWHEN PLUGGED IN,
•REGULARLYCHECK THE FILTERSTO CLEAN OR REPLACE.
•WARNING: DO NOT USE SHARP OBJECTSTO CLEAN OUTTHE HOSE SINCETHEY COULD CAUSE DAMAGE,
•OCCASIONALLY REMOVE BRUSH AND CLEAN DEBRIS FROM END CAPSTO KEEP BRUSH ROTATINGSMOOTHLY.
•WARNING:THE CORDS, WIRES AND/OR CABLES SUPPLIEDWITH THIS PRODUCT CONTAINS CHEMICALS, INCLUDING
LEAD OR LEAD COMPOUNDS, KNOWNTO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR
OTHER REPRODUCTIVE HARM, WASH HANDS AFTER USING.
READALL INSTRUCTIONSBEFOREUSINGTHE APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
•Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces. Electrical shock could occur.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors,
or dropped into water, return it to a service center for inspection. Call 1-800-321-1134 for the nearest service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do
not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
•Do not handle plug or appliance with wet hands.
• Do not put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that
may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dirt container and filters in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Keep the vacuum cleaner on the floor. Only the hand-held vacuum cleaners may be set on furniture.
• Cleaner must be in the upright position to lift the rotating brush off the carpet when doing above floor cleaning.
° Do not use an extension cord with this vacuum cleaner.
•Store the vacuum cleaner indoors. Put the vacuum cleaner away after use to prevent tripping accidents.
• Using improper voltage may result in damage to the motor and possible injury to the user. Proper voltage is listed on the
cleaner plate.
• Unplug before connecting Turbo Tool (Turbo Tool not included on all models).
SAVE THESE INSTRUCTIONS
WARNING:
-rb reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qua fed electrician to install the proper out et. Do not change the plug in any way.
11---_
9 10
78
6 _ __ 3
4a. 4a.
FEATURES
12
13
Fi_Lg_t
1. Handle
2. Dirt Container Release Lever
3. Headlight
4a.*Power Edger" slots w/Wrap Around Bumper (Optional)
4b.*Scuff Guard" Bumper (Optional)
5. Carpet Height Adjust Knob
6. Handle Release Pedal
7. Dirt Container
8. HEPA Filter (in Dirt Container)
9. Cord Clip
10. Stretch Hose
11. Hose Anchor
12. Carrying Handle
13. Stretch Hose Handle
14. Long Power Cord
15. *Power Edger (optional w/Wrap Around Bumper)
16. Belt Storage
17. Swivel Casters TM
18. Extension Wand
19. Crevice Tool
20. 2-in-1 Tool - Dust brush/Upholstery tool
21. On/Off Switch -Just above HEPA Filter
22. Clear Hose Inlet
23. Edge Wedge ®Tool (Corner and stair tool)
NOTE: *Optional tools not included with all
models
. . I 2 screws enter from
top of upright
HOW TO ASSEMBLE TOOL REQUIRED: PHILLIPS SCREWDRIVER
1, Stand unit in upright position and place upper handle onto upright (Diagram 1).
2. Push upper handle onto upright, aligning upper handle with handle opening (Diagram 2).
3. TWO screws (supplied) enter from top of upright to secure handle (Diagram 3).
HOSE ASSEMBLY AND TOOL STORAGE
1. ATTACH HOSE: Attach the flexible hose to the cleaner (Diagram 1). Match the arrows on the hose to the tabs on the clear hose inlet
(Diagram 1A). Push down firmly on the cuff and turn clockwise. Insert the hose handle into the side of the cleaner. Press down firmly to
secure (Diagram 2).
2. ATTACH TOOLS: (Diagram 3) (A) Slide Edge Wedge ®onto the base of upper handle with bristles facing in. (B) *Push Power Edger"
(Optional) onto upper back panel with bristles facing out. (C) Slide 2-in-1 tool onto upper back panel with bristles facing out. (D) Slide
the Extension wand, small end down, onto the lower back panel. (E) Slip crevice tool onto lower back panel.
3. CORD STORAGE: For tidy cord storage, wrap cord around hooks on side of cleaner with quick cord release (Diagram 4) (A).
Height
adjustment
knob
HOW TO OPERATE 1. Plug cord into electrical outlet. 2. Turn cleaner "on". Switch located on left side of cleaner directly above
HEPA filter (Diagram 1).
FLOOR/CARPET CLEANING
1. Handle should be in the upright position before adjusting the carpet setting (Diagram 2). Turn height adjustment knob to match the
surface being cleaned (Diagram 3). Once height is selected the nozzle will go to the correct position.
NOTE: Rotating brush could cause area rug fringe to become tangled within cleaner. Use caution when vacuuming throw rugs with fringe.
ABOVE FLOOR CLEANING
Cleaner must be in the upright position to lift the rotating brush off the carpet when cleaning above the floor.
1. Put cleaner in its upright position.
2. Remove the hose from the side of the cleaner using the handle (Diagram 4).
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner is on. Keep hair, loose
clothing, fingers, and all parts of body away from brush area while cleaner is on.
3. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the end of the wand or hose
handle. To remove tool, twist and pull apart gently.
*FOR HANDS FREE EDGE CLEANING: Remove *Power Edger" from upper back panel. Insert *Power Edger TM into desired *Power
Edger _ slot. Remove hose end from side of unit and hose caddy. Slide hose end onto *Power Edger TM. Glide the upright against walls and
baseboards for superior edge cleaning (Diagram 5).
*Not available on all models
STRETCH HOSE AND HOSE ANCHOR: The Hose Anchor is used to prevent the Vacuum from tipping While using the above
floor cleaning attachments. Remove the Stretch Hose from side of the cleaner using the handle. Lay hose over the back of cleaner (Diagram
1) and secure hose anchor ring, (Diagram 2a) located around hose to base. Pull hose from hose handle for additional length (Diagram 2b).
EXTENSION WAND: Remove wand from side of cleaner by pulling out at the top to unsnap and pull up (Diagram 3).
CARPET SETTINGS
IMPORTANT: PUT HANDLE IN THE UPRIGHT POSITION BEFORE ADJUSTING THE CARPET SETTING.
Turn knob to adjust height of nozzle to match the surface being cleaned (Diagram 4). If cleaner is difficult to push, adjust to a higher
carpet setting.
HOW TO TRANSPORT CLEANER
Use the carrying handle on the back of the cleaner to move cleaner from room to room (Diagram 5).
NOTE: Do not push cleaner forward while leaning on back casters. De not pull cleaner on back casters.
. =
÷
. 4=
CLEANING DIRT CONTAINER &HEPA FILTER:
Replace HEPA filter yearly for maximum performance.
For HEPA filter replacement Part #2-JCO280-000, please call 1-800-321-1134.
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
Empty & Clean DIRT CONTAINER:
1. Depress latch to remove dirt container from cleaner (Diagram 1). Pull dirt container out to empty (Diagram 2).
2. Remove and clean filter (see instructions below).
3. Use a sponge and lukewarm water to wipe dirt container compartment clean.
4. Replace Dirt Container: Set aligning tab on bottom of dirt container into rectangular slot on the cleaner, and push to snap into place
(Diagram 4). If dirt container does not snap into place, check to make sure the filter is secured properly.
CLEAN THE REPA FILTER (internal) located in dirt container:
1. Remove dirt container. Hold dirt container, grasp at top of filter and firmly twist and pull the filter up and out (Diagram 3).
2. Regular Maintenance*: Each time the dirt container is emptied, the filter should be cleaned. Tap the filter firmly against the inside of a trash
can until dirt stops falling from the filter. (Filter will be discolored after use, this will not affect the filter's performance.) Do not brush the filter.
3. Thorough Cleaning*: If you should notice a decrease in the vacuum's power or suction, inspect the cleaner for clogs, empty the dirt cup
and remove all dust and debris from the filter. Once completely cleaned, the vacuum will immediately be ready for use.
4. Replace the HEPA filter: Push down on filter to snap into place and prevent dirt leakage. Return dirt cup to cleaner.
* The cleaning instructions may vary depending on the dirt conditions. In some cases, more or less cleaning of the HEPAfilter maybe required.
4. ENDCAP"_
BELT OR BRUSH REMOVAL & REPLACEMENT [BELT STYLE: 4&5 ]
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE CHANGING BELTOR BRUSHROLL.
TO REMOVE BELT Flip cleaner to expose nozzle base. Base should lay flat and face up. To remove nozzle cover, use Phillips
screwdriver to remove the four screws. Arrows (Diagram 1) show location of screws. Flip cleaner back over and lift nozzle cover off.
Slide belt off motor shaft (Diagram 2). Lift and remove brushroll (Diagram 3). Dispose of old belt.
TO REPLACE BELT
NOTE: When changing the belt, have height adjustment on lowest setting. This will make replacement easier.
1. Place belt on motor shaft, then slip brushroll through belt. Place belt in area of brushroll without bristles (Diagram 4).
2. With belt in place, pull and slide brushroll into nozzle (Diagram 3) making sure that the brushroll end caps are in the correct orienta-
tion (Diagram 3a inset).
IMPORTANT: ROTATE BRUSHROLL MANUALLY TO MAKE SURE BELT IS NOT TWISTED.
3. Reattach nozzle cover. Secure by replacing the screws under the nozzle base.
BELT STORAGE
Stretch belt around hooks on back panel of upright (See page 4, Figure 2 for belt storage location).
LIGHTBULB REMOVAL & REPLACEMENT
TOOL REQUIRED: FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.
This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement call 1-800-321-1134 or your local auto parts store.
1. Lean cleaner handle back. Insert end of standard (flat head) screwdriver into side slot and pry outward to pop headlight lens out
(Diagram 1).
2. Pull bulb out of socket to remove. Push bulb into socket to replace (Diagram 2).
3. Snap headlight lens panel back into place.
WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
Problem Possible Reasons Possible Solutions
Cleaner won't run 1. Power cord not firmly plugged into outlet. 1. Plug unit in firmly.
2. Blown fuse or tripped breaker. 2. Check fuse or breaker in home. Replace fuse/reset
breaker.
3. Needs service. 3. Take to service center or call 1-800-321-1134.
Cleaner won't pick-up
or low suction 1. Dirt Container not installed correctly.
2. Dirt container full.
3. Clogged filter.
4. Nozzle/dirt passage clogged.
5. Clear hose inlet clogged.
6. Brushroll worn.
7. Broken or worn belt.
8. Carpet height setting is incorrect.
1. Review dirt container Removal and Replacement-Pg. 6.
2. Empty dirt container-Pg. 6.
3. Remove filter and clean-Pg. 6.
4. Remove base nozzle cover; remove obstruction OR
Remove hose; remove obstruction.
5. Remove hose and clean inlet- Pg. 5.
6. Replace brushrelI-Pg. 7.
7. Replace belt-Pg. 7.
8. Set carpet height adjustment to appropriate
setting for carpet being cleaned-Pg. 5.
Dust escaping from cleaner 1. Dirt container full. 1. Empty dirt container-Pg. 6.
2. Dirt container net installed correctly. 2. Review dirt container Removal and Replacement-Pg. 6.
3. Hose not installed correctly. 3. Review Hose Installation-Pg. 5.
Cleaner tools won't pick up 1. Hose clogged. 1. Remove hose and tools; remove obstruction-Pg. 5.
2. Hose inlet clogged. 2. Remove hose and clean inlet-Pg. 5.
3. Dirt conlainer full. 3. Empty dirt container-Pg. 6.
4. Filter clogged. 4. Clean filter-Pg. 6.
Headlight not working 1. Bulb burnt out. 1. Replace bulb-Pg. 7.
2. Loose electdcal wires. 2. Call 1-800-321-1134 for nearest authorized
Royal ®Dealer.
Cleaner is difficult to push 1. Carpet height setting is incorrect. 1. Set carpet height adjustment to appropriate
setting for carpet being cleaned-Pg. 5.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
' CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal ®Dealer. Costs of any transportation to
and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available
from an authorized Royal ®Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when request-
ing information or ordering replacement parts. (The model number appears on the back of the cleaner.
