DISH Technologies AVAD1 HDMI to Wi-Fi Converter User Manual User Information Online S55

Download:
Mirror Download [FCC.gov]
Document ID	3370361
Application ID	ukpHLwDembzYXPDZKaDH2w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.26kB (1790803 bits)
Date Submitted	2017-04-25 00:00:00
Date Available	2017-07-25 00:00:00
Creation Date	2017-03-23 10:56:37
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2017-03-23 10:56:37
Document Title	User Information Online S55
Document Creator	PDFCreator Version 1.2.3
Document Author:	chris.wordley

SlingStudio CameraLink Warranty, Safety,
Regulatory and Legal Information
This is a legal document. Keep it in a safe place. Remember to retain your Bill of Sale for
warranty service.
Limited Warranty
What Does This Warranty Cover?
This warranty only covers defects in materials and workmanship of SlingStudio
CameraLink hardware products purchased or leased from Sling Media or its authorized
resellers or partners and extends only to the original user of such products. This
warranty does not cover any Sling Media software provided with your SlingStudio
CameraLink or other third-party hardware or software. Your use of any such third-party
hardware or software will be governed by the terms and conditions of any such thirdparty hardware or software license agreement accompanying such third-party hardware
or software; or as agreed to when you set up an account for your SlingStudio
CameraLink product. This warranty is valid only in the United States.
How Long Does the Coverage Last?
If your SlingStudio CameraLink hardware product was purchased from an authorized
reseller or directly from Sling Media, your SlingStudio CameraLink hardware product is
warranted to be free of defects in materials and workmanship for one (1) year from the
original date of purchase. If you are leasing your SlingStudio CameraLink from an
authorized Sling Media partner or from Sling Media directly, your SlingStudio
CameraLink hardware product is warranted for one (1) year from the date your lease
began,
unless a different period is specified in your lease agreement or other agreement
pursuant to which you obtain your SlingStudio CameraLink hardware product.
What will Sling Media Do?
If your SlingStudio CameraLink hardware product is defective and the defect is covered
by this warranty, Sling Media will repair or replace it with the same product, or another
product with similar features. Any replacement product may be from refurbished stock.
Where a replacement product is offered, the warranty will continue from the date of
original purchase or lease.
How Do You Get Warranty Service?
Please contact the Sling Media technical support team at 1-877-759-3754 to get
warranty service. Whether or not your product is covered by this warranty, you will be
responsible for the cost of shipping the product to the Sling Media Returns Center.
What Does This Warranty Not Cover?
You may only exercise this warranty from the country in which you purchased or leased
your SlingStudio CameraLink hardware product. Sling Media will not send repaired or
replacement products to addresses outside the country in which you purchased your
SlingStudio CameraLink hardware product. If your SlingStudio CameraLink hardware
product is not covered by this warranty, Sling Media may offer to provide out-of
warranty service to you at Sling Media's then-current rates, which includes the cost to
ship a refurbished unit to you that has the same or similar features. This warranty does
not cover the following:
• Installation or setup of your SlingStudio CameraLink product. If you are eligible
for technical support under Sling Media's technical support policies, Sling Media
can help answer your questions about the setup and installation of your
SlingStudio CameraLink product.
• Cosmetic damage, damage due to lightning, electrical or telephone line surges,
battery leakage, fire, flood, or other acts of nature, accident, misuse, abuse,
improperly tampering or opening the product, repair or alteration other than by
Sling Media or an authorized service provider of Sling Media, use of accessories
not recommended by Sling Media, negligence, commercial or institutional use, or
improper or neglected maintenance.
• This warranty does not cover equipment sold AS IS or WITH ALL FAULTS,
shipping and handling, removal or reinstallation, nor shipping damage if the
equipment was not packed and shipped in the manner prescribed.
• This warranty does not cover Sling Media software or any non-Sling Media
hardware or software provided, bundled with or purchased with your SlingStudio
CameraLink product. Your use of any such non-Sling Media hardware or
software will be governed by the terms and conditions of any warranty or other
agreement accompanying such non-Sling Media hardware or software.
TO THE EXTENT PERMITTED BY LAW, REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. SLING MEDIA SHALL NOT BE
HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESSED OR IMPLIED WARRANTY ON YOUR SLINGSTUDIO CAMERALINK
HARDWARE PRODUCT, NOR FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF, OR INABILITY TO USE, YOUR SLINGSTUDIO CAMERALINK
HARDWARE PRODUCT. IN SOME STATES AND JURISDICTIONS, THE FOREGOING
LIMITATION DOES NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS, OR ANY
STATUTORY LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR
OMISSIONS, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. UNDER NO CIRCUMSTANCES SHALL SLING
MEDIA'S LIABILITY, IF ANY, EXCEED THE PURCHASE PRICE PAID FOR YOUR
SLINGSTUDIO CAMERALINK HARDWARE PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON YOUR SLINGSTUDIO CAMERALINK
HARDWARE PRODUCT IS LIMITED IN DURATION TO THE PERIOD OF THIS
WARRANTY. SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. SLING MEDIA RESERVES THE RIGHT TO REFUSE TO HONOR THIS
WARRANTY IF IT DETERMINES THAT ANY OF THE EXCEPTIONS DESCRIBED ABOVE
HAVE CAUSED YOUR SLINGSTUDIO CAMERALINK HARDWARE PRODUCT NOT TO
HAVE PERFORMED PROPERLY. THIS WARRANTY SHALL BE VOID IF ANY FACTORYAPPLIED
IDENTIFICATION MARK, INCLUDING BUT NOT LIMITED TO THE SERIAL
NUMBER, HAS BEEN ALTERED OR REMOVED. THIS WARRANTY SHALL ALSO BE VOID
IF THE SLINGSTUDIO CAMERALINK HARDWARE PRODUCT HAS BEEN OPENED BY AN
UNAUTHORIZED PERSON.
This warranty gives you specific legal rights, and you may have other rights, which vary
from state to state in the United States. To the extent that this limited warranty is
inconsistent with local law, this warranty shall be deemed modified to be consistent
with such local law.
Important Safety Instructions
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 60°C or Incinerate.
Follow All Instructions.
Read and understand all operating instructions prior to use. Keep this document for
future reference.
Charge this product from a USB power source (smartphone/tablet wall charger or power
bank) having an output current rating of at least 2.0A.
Do not immerse the product in water or expose it to rain, moisture, dripping or
splashing.
Do not leave the product where it could reach very high temperatures, for example
inside a vehicle in direct sunlight.
Avoid dropping the product or subjecting it to excessive force, pressure or impacts.
Package and secure the product well during transport to avoid excessive shock,
vibration and damage.
Do not use or charge the product if it appears damaged or abnormal.
Keep the product, plastic packaging and small parts away from babies and children.
Dispose of or recycle the product properly according to local codes. Do not shred.
Do not charge the product at high ambient temperatures.
Handle the product carefully to avoid static electricity discharge into the product. Static
may damage sensitive protection components and cause failures.
Do not charge the product when ambient temperatures are below 0°C or above 35°C
(32°F or above 95°F).
If the product emits odor, generates heat, becomes discolored or deformed, or in any
way appears abnormal during use, recharging or storage, immediately remove it from
the charger and stop using it.
The product should be stored at room temperature. Product should be charged once
every 3 months while storing.
Operate CameraLink with a minimum separation distance of 5mm between it and all
persons to maintain electromagnetic field exposure within permitted limits.
Explanation of symbols
Power button (waiting for correct symbol)
Complies with Battery Charger efficiency regulations (waiting for correct symbol)
Lightning
For added protection of this product during a lightning storm, or when it is left
unattended and unused for long periods, unplug it from the wall outlet.
Servicing
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel. Contact your local office for servicing information.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions.
Adjust only those controls covered by the operating instructions. An improper
adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal
operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.
Replacement parts
When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or parts that have the same
characteristics as the original part. Unauthorized substitution may result in fire, electric
shock or other hazards.
Federal Communications Commission and IC Notices
Do not make changes or modifications to this equipment. This could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note that high-power radars are allocated as priority users in the 5.25-5.35GHz and
5.65-5.85GHz bands. These radars could cause interference or in extreme cases
damage to this equipment.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject
to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with RF exposure (SAR) limits at a distance of 5mm.
Effective Date: The Effective Date of this Warranty is April, 2017.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
Producer                        : GPL Ghostscript 9.04
Keywords                        : ()
Modify Date                     : 2017:03:23 10:56:37+00:00
Create Date                     : 2017:03:23 10:56:37+00:00
Creator Tool                    : PDFCreator Version 1.2.3
About                           : e78f948a-1212-11e7-0000-38a50bf6ce7..Ræ.2017-03-23T10:56:37+00:00
Document ID                     : uuid:e78f948a-1212-11e7-0000-38a50bf6ce7Nà.vÒc..
Format                          : application/pdf
Title                           : User Information Online S55
Creator                         : chris.wordley
Description                     : ()
Author                          : chris.wordley
Subject                         : 

EXIF Metadata provided by EXIF.tools