DISH Technologies MJS79 WLAN DTS/UNII a/b/g/n SISO/MIMO Satellite Setup Box User Manual AirTV US QSG 20150825
Echostar Technologies LLC WLAN DTS/UNII a/b/g/n SISO/MIMO Satellite Setup Box AirTV US QSG 20150825
User Guide ID091
9:45 AM 100%
iPad
ANTENNA IN
ANTENNA IN
ANTENNA IN
?Need more help?
1Connect AirTV™ to your antenna
2Connect an Ethernet cable (optional)
3Connect the power cable
4Set up your AirTV
Quick Start Guide
Stay connected with AirTVWe’re here for you.
For more information and a step-by-step setup video,
visit airtv.net/setupvideo.
Find a treasure trove of helpful articles at support.airtv.net Twitter
@AirTVUs
Facebook
facebook.com/
USAirTV
Before you start
Place your HDTV Over-The-Air antenna in a location that can best
receive signals such as a window. You may need to adjust the antenna
for optimal performance later, so it’s best not to permanently mount
it just yet. For more information on ideal antenna placement in your
home, visit airtv.net/antennaplacement.
Connect your AirTV
to your antenna via
coaxial cable.
This step is only needed
if you wish to provide
your own Ethernet cable
for a wired network setup.
If you plan to connect to
your AirTV using WiFi,
you can skip this step.
One or more lights
should start blinking on
the front of the AirTV,
once the power cable
is properly connected.
airtv.net/setup
To complete setup, visit the above link on your computer
or mobile device and follow the instructions.
What’s in the box
Watch all your local Over-The-Air
television. Anywhere.
AirTV™
1
Power Cable
HDTV Over-The-Air
antenna with included
coaxial cable*
Sling Televison™ app–
free to download
2
What’s needed
*Visit airtv.net/antennas for more information
Ethernet Cable
Power Cable
Coaxial Cable
Antenna
Modem/Router
airtv.net
Federal Communications Commission Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by following one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this device may void your authority to operate this equipment.
Device must be installed at least 20cm (~8 inches) from typical person locations per FCC RF Exposure guidelines.
Operation in the band 5150-5250 MHz is only for indoor use.
Copyright ©2015 EchoStar Technologies, L.L.C. All rights reserved. AirTV and the AirTV logo are trademarks of EchoStar Technologies,
L.L.C. Other products and companies mentioned are the trademarks of their respective owners and not of EchoStar, Inc.
Warranty, safety, regulatory, and legal information can be found at airtv.net/warranty
Part Number: 208323
320mm
110mm 110mm 100mm
180mm
320mm
110mm 110mm 100mm
180mm
™