DJI Phantom Drone User Manual Battery And Charger Instruction V1.0
Phantom 1 - Product Information - DJI Battery and Charger Instruction v1.0 Battery_and_Charger_Instruction
2013-01-08
User Manual: DJI DJI Phantom Drone Battery and Charger Instruction v1.0
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
Battery & Charger Instruction V1.0 电池&充电器 Thank you for purchasing our product. Please read the entire instruction strictly to use you product. 任何用户在使用本产品之前，请仔细阅读本说明。 Battery: LiPo(2200MAH - 20C－11.1V) Instruction 使用说明 V1.0 电池：LiPo(2200MAH - 20C－11.1V) 简介 Charger 充电器 AC Input: 100-240V 输入电压范围：100-240V Charge Current: 1A/2A/3A Selectable 充电电流：1A/2A/3A 可选 Current Drain for Balancing: 200mA 平衡电流：200mA 功率：最大 20W 充电器指示灯 Output Power: MAX 20W LED Indicator 准备充电 The charger is ready to Charge. Charge *If the charger is in Max Output Power condition, Status the charge current will be decided by 20W. For LED 状态灯 The charger is charging in CV Mode. The charging process finishes. example, when 2A or 3A is selected for the 3S battery, the charge current is only 20w/11v=1.8A 充电 The charger is charging in CC Mode. Cell The Cell is charging. LED The Cell is balancing. actually. *若达到最大功率，则充电电流的大小由功率决定，例如，3s电池 单元 对应单元充电 选择2A或3A充电，充电电流仅为20w/11v=1.8A。 状态灯 单元电压平衡 1. 将充电线插入充电接口（注意充电线的插头颜色要与充电接口 1. Connect the red and black plugs of the charger cable to the charge 颜色对应，切勿插反！）。 socket. Make sure the red plug to the red charge socket, and the black plug to the black charge socket. 2. 将 AC 连接线插入充电器中，另一端连接到交流电插座上 2. Insert the AC power cord into the charger and AC cord into a wall 单元2 LED 单元1 LED (100~240V)，等待充电状态灯绿灯闪烁方可使用。 socket (100-240V). The charge status LED will flash green. 3. 选择电池类型为 LiPo，并且拨动开关选择充电电流为 2A。 3. Select the battery type switch to LiPo and the current switch to 2A. Balance Wire 4. Connect the battery connector to the XT60 connector of charger 4. 电池插头连接充电线的 XT60 插头， 并将平衡充电接头插入 3S 平衡接口。 cable, and the battery balance wire to the 3S balance socket. 充电线 5. 开始充电，单元状态灯(1S/2S/3S)红灯常亮。充电过程中，充 5. Start charging. The 1S/2S/3S cell LED will glow constant red. X T60 Connector B atter yConnector CC (Constant Current) mode. When the charge status LED blinks green & red alternately is in CV (Constant Voltage) mode. 6. When the cell LED is flashing, the cell is balancing. 7. When the battery is fully charged, the charge status LED will glow 电状态灯红灯常亮表示充电器处于 CC 模式(恒流模式)；充电 X T60插头 电池接头 状态灯绿红交替闪烁时表示充电器处于 CV 模式(恒压模式)。 6. 当单元状态灯(1S/2S/3S)开始闪烁时，表示对应单元正在进行 电压平衡。 7. 等待充电状态灯变成绿灯常亮，表示充电完成。 constant green. 8. Please disconnect the battery and the charger. 8. 充电完成，请断开电池与充电器的连接。 Make sure to use the battery after fully charging. 请确保电池充电完成之后再使用电池，否则会缩短电池使用寿命。 When the charger is in the CV mode, the battery is over 80% charged. 充电器处于 CV 模式时(充电状态灯绿红交替闪烁)，电池充电电量达到 80%以上。 Please use the battery according to the attached sticker. DOT NOT connect the battery to the charger cable before connecting the charge cable to the charge socket, in order to avoid short circuit. ©2013 DJI Innovations. All Rights Reserved. 1| CV 模式充电 完成充电 电池充电步骤 Battery Charging Procedure When the charge status LED glows constant red, it is charging in CC 模式充电 请根据电池贴纸的提示正确使用电池。 请务必在充电线插入充电接口后再连接充电线和电池，避免意外短路。 ©2013 大疆创新 版权所有 2| 连接电源插座 AC 100-240V 单元3 LED 单元4 LED
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Create Date : 2013:01:08 16:56:38+08:00 Modify Date : 2013:01:22 17:53:21+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Title : Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2013:01:22 17:53:21+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:08903629-8f90-4ffc-9560-b0bac7d021e7 Instance ID : uuid:09cfcce3-9967-4bb8-ae08-076e4e37065b Page Count : 1EXIF Metadata provided by EXIF.tools