Contents
- 1. User Guide
- 2. User Manual
User Manual
What’s Included
1. Radar Detector
2. Windshield mount
3. Power cord
4. Owner’s Manual
Installation
1. Attach the radar detector to the bracket
2. Mount the radar detector firmly onto the windshield
3. Connect the power cord to the detector, and plug the adapter on the power cord into your vehicle’s
cigarette lighter receptacle
Controls & Settings
Volume Control: On/Off control, and to adjust the volume of the tone alerts
Mini USB port: Used for firmware updates when available
Key Buttons:
Dim Mute City
SHORT PRESS on key button
Dim Mute City
Bright/Dim/Dark Automute
On/Off
or Mute Highway/City1/City2
Dim button: Short press on the Dim button changes the brightness setting.
Dim -> Dark-> Bright
Mute button pressed when at rest state: When the Mute button is pressed, it will turn on or off the
auto-mute function
Mute button pressed when unit is detecting: Pressing on the Mute button when the unit detects radar
or laser will mute the alert
City button: Short press on the City button will change the detection mode.
Highway -> City1 -> City2
(Highway): All bands are detected
(City1): Alert will not sound until it reaches level 3 out of 6
(City2): No sound alert
LONG PRESS on key button
Dim Mute City
Dim+Mute+City
Voice
On/Off Ka
On/Off X-
On/Off Display Mode
Change
Dim: Long press on the Dim button will turn the voice on/off
Mute: Long press on the Mute button will turn the Ka-Band on/off
City: Long press on the City button will turn the X band on/off
Dim+Mute+City: Pressing the Dim, Mute & City button simultaneously will change the display mode.
Normal display mode: Displays the band detected (X, K, and Ka)
Frequency display mode: Displays frequency that is detected
WARNING
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS
NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.