DNS 24999 Wireless stereo earbuds User Manual Bluetooth manual 20180604
SHENZHEN DNS INDUSTRIES CO., LTD. Wireless stereo earbuds Bluetooth manual 20180604
DNS >
Contents
- 1. User Manual
- 2. Packing
User Manual
Press
Power
Pairing Steps
Power on/off
Press and
hold 2s
Power on - Press and hold the multi-funcation
button (MFB) for 2s untill the BLUE light
flashes;
Power off- Press and holde the MFB for 5s
untill the RED light on for 2s;
Call answer - Answer by your phone or
press the MFB.
Press and
hold 5s
Power on Power off
Call answer
Press
Last Number Redial
Double tap
Last number redial - Quicky tap the MFB
twice to redial the last dialed phone
number;
Play music - Press the MFB to play/pause
music under music playing status.
Play Music
User Manual
Product Description Pairing Steps
NOTE: The headset
will power off
automatically 3 minutes
without connection.
Under power-off status, press and hold the
MFB untill the indicator light flashes red and
blue alternatively, then the Headset enters the
pairing mode;
Turn on Bluetooth on your moblie, find the
Model No, of the Headset, and connect.
Turn off Bluetooth of the first mobile, and
repeat the step above to connect with the
second mobile.
Accessorise:
* Instruction x 1pcs
* Extra ear gels x 2pcs
Voice Prompt
Power on/off
# You will hear "power on" when the
Headset is power on.
# You will hear "power on" when the
Headset is power off.
# You will hear "connected" when the
Headset is paired.
# You will hear "low battery" when the
Headset is in low power status.
.Use and keep the Headset under ambieent
temperatures;
. Don't throw it in case product damage
caused;
. Don't disassemble, repair or alter the
Headset;
. Don't clean the Headset with chemical
solvent;
. Use a USB charger of DC5V to charge the
Headset if necessary;
. Don't discard the Headset at randon , or put
it into fire or high temperature environment
(60/140) in case of danger.
Warning:
Track Control
hold 2s
Track control - Press and hold the "Voleme+"
button for 2s to skip to the next song; Press
and hold the "Volume -"button for 2s to play
the previous song.
Volume adjust - Press the "Volume +" or
"Volume -" button to increase or decrese
the volume.
Power and
hold 2s
Volume Adjust
Ear bud
Version: Bluetooth V4.1
Charging method: Power supply with output
of DC 5V 135mA
Battery type: Rechargeable lithium-ion
polymer battery
Bluetooth power class: Class 2
Profile supported: HSP/HFP/A2DP/AVRCP
Talk time: Up to 10 hours
Listen time: Up to 10 hours
Standby time: 180 hours
Play audio file from a mobile phone,
laptop or other Bluetooth device
connected with it.(AV dongle : General BT
dongle)
Play audio from a PC after connected with
its BT dongle, and also support wireless
internet voice chat through QQ,
WECHAT and SKYPE.
Headset Overview
Double tap
Call End
Press
Call end - End by your phone or press the MFB;
Call reject - Reject by your phone or press
and hold the MFB for 2s
Call Reject
Indicator light and
Microphone
Volume-/Previous song
MFB
Volume+/Next song
USB charge
FCC ID: ZBC24999
Made in China
双面印刷，双铜105克
正面
反面
Statement:
T
his device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(
2) this device must accept any interference received, including interference that may
c
ause undesired operation.
W
arning: Changes or modifications to this unit not expressly approved by the party
r
esponsible for compliance could void the user’s authority to operate the equipment.
N
OTE: This equipment has been tested and found to comply with the limits for a Class B
d
igital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
T
his equipment generates, uses and can radiate radio frequency energy and,
i
f not installed and used in accordance with the instructions, may cause
h
armful interference to radio communications.
H
owever, there is no guarantee that interference will not occur in a particular installation.
I
f this equipment does cause harmful interference to radio or television reception,
w
hich can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.