DNS SMDP23NA AV Dock station for iPod&iPhone; User Manual 3 18

SHENZHEN DNS INDUSTRIES CO., LTD. AV Dock station for iPod&iPhone; 3 18

user manual 3.18

ComponentAV Dock Station for iPod&iPhone PowerUSB power input:5V DC 1AAV Dock Station output power:5V DC 1A, or 5V DC 500mA Compatibility WarningThank you for buying our product. Before operating this product, Please read the manual in detail for proper operation of the AV Dock Station for iPod&iPhone 1. AV Outa),Plug the red, green, and blue video connectors into the component video input(Y,Pb and Pr) ports on your TV or receiver, Plug the write and red audio connectors into the left and right analog audio input ports respectively, on your TV or receiver. Plug the mini HDMI connectors of component AV cable into AV Dock Station.b), Put the Dock plate suitable for iPhone/iPod into the groove of the UsingAV Dock Station Remote ControlComponent AV CableMini USB Cablethe Dock Station, and insert the iPhone/iPod into the Dock Station to ensure that the Apple 30 pin connector of the Dock Station is duly connected to iPhone/iPod connector.c), then you can enjoy the relaxing time with the remote control.The Kit Includes： Component dock station x1 (inclueds iPhone4 plate X1, iPod touch/iPhone 3GS plate x1) Remote control x1 1M Mini USB cable x1 1.5M Mini HDMI/5RCA cable x1iPhone 4 PlateiPod Touch /iPhone 3GS Plate3. How to change the plate?POWERMENUENTERMUTEREPEATSHUFVOL+VOL-Component AV Cable2. Charging & SyncConnect AV dock station to USB power adapter and plug Apple device into the dock for charging.Connect AV dock station to computer for charging and sync via the mini USB cable .4. Important NoticeTo remove iPhone/iPod,side theiPhone&iPod in an upward motionNever pull your iPhone/iPodtowards you to removeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not modify, disassemble, open, drop, crush, puncture or shred the product Do not expose the product to rain or water Keep away from open flame or sunlight to prevent heat build-up Keep away from high voltage devices This product is not a toy, keep away from children. Insure that all persons who use the product read and follow these warnings and instructions. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
PowerUSB power input:5V DC 1AAV Dock Station output power:5V DC 1A, or 5V DC 500mA Thank you for buying our product. Before operating this product, Please read the manual in detail for proper operation of the AV Dock Station for iPod&iPhone Av Dock Station Remote ControlComposite AV CableMini USB Cablethe Dock Station, and insert the iPhone/iPod into the Dock Station to ensure that the Apple 30 pin connector of the Dock Station is duly connected to iPhone/iPod connector.c), then you can enjoy the relaxing time with the remote control.The Kit Includes： Composite dock station x1 (inclueds iPhone4 plate X1, iPod touch/iPhone 3GS plate x1) Remote control x1 1M Mini USB cable x1 1.5M Mini HDMI/3RCA cable x1iPhone 4 PlateiPod Touch /iPhone 3GS PlatePOWERMENUENTERMUTEREPEATSHUFVOL+VOL-Composite AV Cable2. Charging & SyncConnect AV dock station to USB power adapter and plug Apple device into the dock for charging.Connect AV dock station to computer for charging and sync via the mini USB cable .CompositeAV Dock Station for iPod&iPhone3. How to change the plate?4. Important NoticeTo remove iPhone/iPod,side theiPhone&iPod in an upward motionNever pull your iPhone/iPodtowards you to remove 1. AV Outa),Plug the yellow video connector into the composite video input port on your TV or receiver, Plug the write and red audio connectors into the left and right analog audio input ports respectively, on your TV or receiver. Plug the mini HDMI connectors of component AV cable into AV Dock Station.b), Put the Dock plate suitable for iPhone/iPod into the groove of the UsingCompatibilityThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not modify, disassemble, open, drop, crush, puncture or shred the product Do not expose the product to rain or water Keep away from open flame or sunlight to prevent heat build-up Keep away from high voltage devices This product is not a toy, keep away from children. Insure that all persons who use the product read and follow these warnings and instructions. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Navigation menu