DNS W070D Bluetooth Ear Bud User Manual E3 2

SHENZHEN DNS INDUSTRIES CO., LTD. Bluetooth Ear Bud E3 2

User manual

1: MIC2: Vol+/next track3: Power/pause/play/Hands free4: Vol-/previous track5: Bluetooth indicator6: USB charging portPackage Components1pc Bluetooth Ear bud1pc User Manual 1pc Micro USB Cable 0.6M1set (S/M/L) silicone ear tipsUser ManualBluetooth headset123465SpecificationFrequency Response Range:30HZ -- 15KHZBluetooth Vision: V4.1+EDR Power Supply: 3.7V Lithium Battery 50mAhTransmission distance: 10M Playtime: 6 hours(50% volume)Charging Voltage: 5V/50mA Charging Time: 2 hoursOperationsTurn on: Long press the button of power to turn the ear bud on, the blue indicator flashes quickly with voice prompt, it means ear bud is activated.Turn off: Long press the button of power to turn the ear bud off, the red indicator flashes three times with voice prompt, then ear bud is closed.Bluetooth mode operation1、The ear bud will be paired with last device automatically in 30s. The red light is flashing in blue light while the ear bud is searching for Bluetooth could be paired.2、Turn on the Bluetooth in your device settings and select “16WMS070D” until voice announced. The blue indicator flashes slowly once paired successfully.Functions:Power/Pause/Play/Hands Free: In playing mode, short press the button to pause or play music. When there is a call coming, short press the button to answer it and then press once to hang it up, double-click it to reject a call. Volume/Track: Short press the button to select volume up or down. Long press the button to select previous track or next track.150x210mmNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. —Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu