DNS WX65001 Bluetooth Speaker User Manual BT SPEAKER 16WMS129 2017 02 13
SHENZHEN DNS INDUSTRIES CO., LTD. Bluetooth Speaker BT SPEAKER 16WMS129 2017 02 13
DNS >
User Manual
4: Vol+/Next Track
3: Vol-/ Previous Track
2: Pause/Play
1: Power
6: USB Charging Port
7: Aux in Port
Package Components
1pc Speaker
1pc User Manual
1pc Micro USB Cable 0.6M
1pc Aux-in Cable 0.6M
5: Charging Indicator
User Manual
Bluetooth Speaker
How to power on or off the device:
Press and hold the power button to turn the speaker on or off. The
blue indicator will flash quickly with a voice “Powering on”
indicating the device is powered on. The speaker will automatically
go into Bluetooth mode upon powering on.
How to pair device using Bluetooth:
1. Power on speaker and ensure that the blue indicator light
flashes quickly (this means that the device is in Bluetooth pairing
mode)
2. Turn on the Bluetooth function of the device (smartphone,
tablet, computer, etc.) which you would like to pair with the
speaker. Ensure that the device is in pair mode.
3. Select “18WMS014” on your selected device to pair with
speaker until it says “Paired” indicates that a successful paring has
occurred.
4. You should now be successfully paired to the speaker
Using the 3.5mm audio jack(Aux-in):
Plug in a 3.5mm audio jack into the Aux in port. Once a 3.5mm
audio jack is inserted into the Aux in port, the device will
automatically be switched to Aux-in function. Plug the other end of
the 3.5mm audio jack into the compatible device you are wishing
to play music from.
Functions:
Accepting a call - Press the “pause/play” button
Rejecting a call - Press and hold the “pause/play” button
Ending a call - Press the “pause/play” button
Changing Volume – Press the “+ or -” button
Changing the track – Press and hold “+ or -”button
150x210mm
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is needed.
—Consult the dealer or an experienced radio/TV technician for
help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Click18WMS014 2018 VERSION 1