DOMITECH ZBR30DL Z-wave Light Bulb User Manual ZBR30DL Manual

Download:
Mirror Download [FCC.gov]
Document ID	2685582
Application ID	7vbxe6zXM+OSCS+utkzvgA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	306.31kB (3828878 bits)
Date Submitted	2015-07-21 00:00:00
Date Available	2015-07-21 00:00:00
Creation Date	2015-07-21 10:02:27
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-07-21 10:02:27
Document Title	ZBR30DL Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Jacky Koo

demiteeh
Wireless Light
ing Device
Z-wave Smart LED Light Bulb
HUS
@u
LISTED
This product speaks with other Z-Wave certified devices
FEATURES
INTRODUCTION
domitech Smart Light Bulb
is a member of the ZrWavelK family and
communicate With other ZeWavelg
certified devices in a control network.
The Smart Bulb can be controlled by
the erave remote controller or apps.
[ach ZrWave device serves as a node to
repeat the Signal tn the network. thus,
extending the overall ZrWave mesh
wireless network range. Different types
and brands of l-Wave devices can be
associated with domitech Smart Bulb in
your system and they will work together
to optimize and expand the coverage of
your ZrWave network Once setup is
completed, you can enjoy the
convenience and leisure which Smart
Bulb offers.
- Butltri’n ZrWave radio , can be controlled remotely and wtrelessly
- Plugand play, Simple setup
- ionger life and more energy ettioent tha
- instant ”0N”
- OverrTherAit firmware upgrade availabl
static controller, PC and software
t Powered by ZrWaveS SOU Series modul
~ Manual reset capability
IWARNING!
ri incandescent or florescent light bulbs
e with compatible gateway, ZeWayeW
0 inside
RISK OI TIRE, ELECTRICAL SHOCK & BURNS
NOT FOR EMERGENCY LIGHTING
[)0 NOT USE WITH MEDICAL AND LIFE
SUPPORT INSTRUMENT
No user serviceable ports are in this module
INCLUSION
Step i,'t‘urn off power to the light bulb
socket of your preferred location.
Step 2, Screw In the Smart Bulb
into the socket
Step 3, riote your network Luritruller Into inLluSIUn mode by following the
controller manufacturer‘s instructions
(a
Step 2, Turn on power to the socket after
promoted by your network controller iri(lu5i0ri
mode. The Smart Bulb will be included into
your network within 30 SeLuridS. The Smart
bulb will flash 2 times after inclusion is
Successful. lf the eontroiier/gutewuy shows it
failed, repeat the procedure.
Note: lf lnclusion still fails after the 2nd attempt, you need to first RESU the
Smart Bulb befnte repeating the above steps.
Before repeating the above steps, try moving the Smart Bulb to the bulb socket
in the same room as your home gateway in case the preferred outlet is out of
range initially Repeat step 1-2 until the Smart Bulb is added to your network.
Once the Ilglit bulb has been successfully added to your home network, you
can move it to the preterred location in the borne
Manually Reset r Hick the wall switch
”OEI'VON” cycle 4 times within 4 seconds
With OH and turn ON will be counted 851
”OFFVON” eycICi. The Smart Bulb will flash
tWice after Reset is successful. Use this
procedure only in the event that the
network primary controller is lost or
otherwise inoperable
BASIC OPERATION
The Smart Bulb can be controlled ON/OFE/BRIGHT/DIM wirelessly with
a ZrWave remote tonttollet or through a gateway vta an app on d smart
phone, tablet, or a re.
Depending on the capability of your controller/gateway, once the Sniart
Bulb has been added to your network, you may assign ll to a Group or Scene
and change its status via your controller/gateway.
ASSOCIATION
The Smart Bulb supports Group i with up to five devices for lit’eline
communication. Groupi must be assigned the Node D of the controller to
which unsolicited notifications will be sent, The ZrWave controller should
set this association automatically after inclusion Lifeline association only
supports thc ”manual reset" event Pleasc refer to the instructions manual of
your remote controller or gateway tor detail ptotedures on how those
function can be set
EXCLUSION
By tontrotier rThe Srnurt Bulb tun be excluded from your network by your
tontroller/Cateway Similar to the Inclusion process, turn of power to your
light bulb and place your network controller into excltISicm mode by
following the controller manufacturer‘s instructions. Once prompted by
your network controller, turn my the light switch. The Smart Bulb will
flash twice to confirm that it has successfully been excluded from your
network Please refer to your controller/gateway instructions manual for
details
By manually etho Smart Bulb can be
extluded manually by flicking the wall
Switch "OFF-ON” cycle 4 times within 4
seconds [Turn OIF and turn ON Will be
counted as | ”OFF-0N” cycle‘i. The bulb will
flash twice after Reset is successful Use this
procedure only in the event that the network
primary controller is lost or otherwise
inoperabio.
OFF x4
DFFrONeltil r in 4s
Dim level when the domiteclt Smart LED Light Bulb is turned 0N (Switch ONLY)
Vou may select the ditn level whenever the light is turned back ON to be either
full brightness l100°/a dim level) or be the same as the last dim setting when the
light is on by flicking the wall switch,
Parameter 1 Length: 1 Byte Valid Values: 0 or i tdetault : 0)
When value : 0, the brightness level will be resume to full brightness when the
Smart Bulb is turned every time.
When value : l, the brightness level will maintain same dim level as the last
setting when the Smart Bulb is turned on again,
Parameter s: Dimming/Brightening Step Level
Vou may change the dimming step level when you adtust the brightness by
your controller/gateway
Parameter 9 Length: 1 Byte Valid Values: le99 (default : ii
When the value is low, dimming/brightening is gradual.
when the value is high, dimming/brightening is rapid.
Parameter 10: Dimming/Brightening Step Timing
You may change the dimming speed quicker or slower by changing Parameter io.
Parameter i0 Length: ‘l Byte Valid Values: 1710 [default : 3)
When the value is low, the step timing is quick.
when the value is high, the step timing is slew
MANUAILV TURNING ON or OFF THE lIGHT SWITCH
when you want to manually tum ON the Smart Bulb whenever it is turned on
by a program or a remote control, flick the switch twice. The tirst flick will cut
power to the light and the 2nd flick will turn ON the light.
Vou may manually switch orr the light bulb
while keepin the Smart Bulb online in the
network an function as a Z-Wave signal
repeater to maintain proper mesh network. The
tunction can be activated by flicking the wall
switch "OFFVON" cycle two times within two
Seconds. In other words, flick the switch four
times [OFFVONVOFFVONX The Smart Bulb light
will be OFF while it maintains the function as a
ZsWave signal repeater and remains online to be
turned ON by program or by an app wirelessly
IMPORTANT NOTE:
To accomplish the repeater functionality, other Zewave devises should be
poweredeup state during inclusion of the Smart Bulb lt can make sure all Zewave
devises are in one network,
Please note that it is extremely important to follow the above practice or to use
ONLY your preferred Wireless remote control device to turn ON or OFF the light.
Without the electrical power to the light bulb, the Smart Bulb cannot be turned ON
remotely nor function as a signal repeater to maintain proper ZsWave network.
To avoid family members trom accidently turning on the power hi the Smart
Bulb, install the optional clear cover that its over your wall switch included with
your product, Please refer to the separate installation sheet.
About the Z-Wave 500 Series Module with Z-Wave Plus features:
You can use a ZrWaVe certified portable or statlc Controller to communlcate with
the module. Depending on the capability of your controller or gateway sortware,
the following simple to advanced operations may be pertormed. Please rerer to
the controller or gateway manual for details
l. Addtlnclude) or DeletetExclude) the Smart Bulb to/from your network
2. Turn On or Off the Smart Bulb remotely
3. Assign the Smart Bulb to a specific Group/Scene and/or to include the bulb
as part of your ALL ON or art command,
4. OveretheeAir firmware update by your gatewa or static controller
5. Lifeline function which automaticall notifies t e associated modules and
the network that a manually reset cn/ice is no longer in the network, thus,
the corresponding association becomes invalid
NOTE:
Please note that like any other lights, the Smart Bulb Will be OFF after a power
failure. The smart bulb will be ”ON” with full brightness after the power is
resumed if parameteri is not changed by the controller/gateway
SPECIFICATIONS
Model: ZBFGDJ Will MEN
lnput power: TZD VAC, 60 H/..
brightness: 650 lumens (Equivalent to osewaitt incandescent light bulb)
Power Consumption; 25w
Color Temperature: WI 27%
Bulb Lifetime: Approx, 29,000 hours ttquivalent 228 years based on 3 hrs/day)
Radio frequent: : 9084 MHz / 9T6 MHz
wireless ran 'e p to 130 teet line or sight between the controller and the
other avallabe nodes.
Normal operating temperature: 77“F (25°C)
POR INDOOR USE ONLY
interoperability With ZeWave® devices
A ZrWave® network can integrate devices from various classes of products,
and these devices can be made by different manufacturers The domitechfb
product introduced in this instructions manual has a ZsWave certification which
guarantees such an interoperability
FCC ID: 2AC4EZBR30DL
The Federal Communication Commission Radio Frcquency Interference
Statement includes the following paragraph;
The equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant to part is of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment uses, generates and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communication.
Howe/er, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures
. Reorlent or relocate the receiving antenna
. Increase the separation between the equipment and receiver
. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
. Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the followmg two conditions:
- This device may not cause interference
. This device must accept any interference, including interference that
may cause undesired operation of the device.
IMPORTANT NOTE:
To comply with the rec RF exposure compliance requirements, no change to
the antenna or the device is permitted. Any change to the antenna or the device
could result in the don/ice exceeding the RF exposure requirements and void
user’s authority to operate the (IeVlCe,
IC: IZ3ZDA—ZBR30DL
This device complies With Industry Canada license-exempt RSS standardts),
Operation is subiect to the folloWing two conditions:
lil This device may not cause intenerence, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
ZeWave is a registered trademark of Sigma Designs
WARRANTY
Domiteth Products warrano to the original purchaser of this product that for the
warranty period, this product will be free from material defects in materials and
workmanship. The foregoing warranty is subject to the proper installation,
operation and maintenance of the product in accordance with installation
instructions and the operating manual supplied to customer Warranty claims
must be made by customer in writing within 30 days of the manifestation of a
problem, Domitech’s sole obligation under the foregoing warranty is to repair,
replace or correct any such defect that was present at the time of delivery, or to
remove the product and to refund the purchase price to customer. The warranty
does not extend to consequential or incidental damage to other products that
may be used With this product. For inquiry and customer service, email to
supporttmdomitcchproductscom
Warranty period: limited l year from date of purchase
Domitech Products, LLC
IMO E. Southlakc Blvd. Suite L73i2
Southlake, Texas 76092

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:07:21 10:02:27+08:00
Create Date                     : 2015:07:21 10:02:27+08:00
Format                          : application/pdf
Title                           : ZBR30DL Manual.pdf
Creator                         : Jacky Koo
Document ID                     : uuid:75f49119-58b3-4dd2-949f-6ba6ef13d514
Instance ID                     : uuid:f697be76-1161-46b0-8493-893184e7710c
Page Count                      : 2
Author                          : Jacky Koo

EXIF Metadata provided by EXIF.tools