DOMITECH ZRKSW Z-wave 6inch Downlight User Manual ZRKSW Manual

Download:
Mirror Download [FCC.gov]
Document ID	2725324
Application ID	gMAITDI/3uj1u0iOpxIAdQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	309.59kB (3869910 bits)
Date Submitted	2015-08-25 00:00:00
Date Available	2015-08-25 00:00:00
Creation Date	2015-08-07 14:23:06
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-08-07 14:23:06
Document Title	ZRKSW Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Jacky Koo

domiteclt
Wireless Lighting Device
Z-wave Smart LED Light Bulb
C “S
LISTED
This product speaks with other Z-Wave ce ed devices
INTRODUCTION
Domltech Smart LED REITUIlI Kit ZRKSW is a member oi the ZrWave® family
and communicate with other ZeWave® certified devtces in a control network
The Smart Bulb can be controlled by the Zewave remote controller or apps, Each
ZeWave device serves as a node to repeat the signal in the network, thus,
extending the overall ZeWave mesh wireless network range, Diftcront types and
brands of ZrWai/e devices can be associated with domitech Smart Bulb in your
system and they will work together to optimize and expand the coverage of your
Z-Wave network, Once setup is completed, you can enjoy the convenience and
leisure which Smart Bulb offers.
FEATURES
- Builtein ZrWavc radio . can be controlled remotely and wirclcssly
- Plug and play, simple setup
- Longer lite and more energy etticient than incandescent or tioreseent light bulbs
D Instant ”0N”
- OvereTheeAlr rirmware upgrade available with compatible gateway, ZrWdVSE
static controller, PC and soitware
- Powered by Z-Wave’R 500 Series module inside
- Manual reset capability
l WARNING l
RISK OF FIRE, ELECTRICAL SHOFK & BURNS
NOT FOR EMERGENCY LlGHTINC
DO NOT USE WlTl | MEDIQL AND LlFE SUPPORT INSTRUMENT
No user sewiceabie parts are in this module
Pleasc rcter to the included installation manual to begin the setup or your bulb
INCLUSION
Step 1, Place your network controller into inclusion mode by iollowmg the
controller manufacturer‘s instructions.
(0
Stop 2, Turn on power to the socket after
promoted by your network controller inclusion
mode. The Smart Bulb will be included into
your network Within 30 seconds. The smart
bulb will flash 2 times after Inclusion lS
successtui, it the controller/gateway shows rt
tailed, repeal the procedure.
Note: it Inclusion still tails arter the 2nd attempt, you need to tirst RESET the
Smart Bulb betore repeating the above steps
Betore repeating the above steps, try moving the Smart Bulb to the bulb socket
in the same room as your home gateway in case the preterred outlet is out of
range initially. Repeat step i-z until the Smart Bulb is added to your network,
Once the light bulb has been successtuiiy added to your home network, you
can move it to the preterred location in the home.
Manually Reset , Hick the wall switch
"OFI‘rON" Cycle 4 times within 4 seconds
fl'um OFF and turn ON will be counted asi
”OFFVON” cycle). The Smart Bulb will flash
twice at'ter Reset is successful, Use this
procedure only in the event that thc
network primary controller is lost or
othcrwisc inoperable.
BASIC OPERATION
The [KKSW Smart Bulb can be controlled ON/OH/BRIGHT/l)lM wirelessly
with a ZeWave rcmotc controller or through at gateway via an app on a stnart
phone, tablet, or a PC.
Depending on the capability of your controller/gateway once the Smart Bulb
has been added to your network, you may assign it to a Group or Scene and
change its status via your controller/gateway
ASSOCIATION
The Smart Bulb supports Group 1 with up to iive devices tor liieiirte
communication Croupi must be assigned the Node l1) oi the controller to
which unsolicited notifications Will be sent. The Z-Wave controller should
set this association automatically after inclusion. Lifeline association only
supports the ”manual reset” event, Please reterto the instructions manual of
your remote controller or gateway for detail procedures on how these
function can be set.
EXCLUSION
By controller - The Smart Bulb can be excluded from your network by your
controller/Gateway Similar to the Inclusion process, turn off power to your light
bulb and place your network controller into exclusion mode by following the
controller manufacturers instructions Once prompted by your network
controller, turn ON the light swrtch The Smart Bulb wrll flash twice to confirm
that it has suecessiully been excluded trem your network. Please reter to your
controller/gateway instructions manual tor details.
By manually , The. smart Bulb can be excluded
manually by ticking the wall switch "orreon"
cycle 4 times within 4 seconds trurn orr and
turn on will be counted as ‘l ”OFTrON” eyelet.
The bulb will tlash twice atter Reset is
successrul. Use this procedure only in the
event that the network primary controller is lost
or othenrvise inoperable.
Dim level when the domitech Smart [ED Light Bulb is turned 0N (Switch ONLY)
You may select the dim level whenever the light is turned back ON to be either
full brightness (100% dim level) or be the same as the last dim setting when the
light is on by flicking the wall switch,
Parameter 1 Length: 1 Byte Valid Values: 0 or 1 (default : 0)
When value c 0, the brightness level will be resume to full brightness when the
Smart Bulb is turned every time.
When value : i, the brightness level will maintain Same dim level as the last
Setting when the Smart Bulb is turned ON again,
Parameter 9: Dimming/Brightening Step Level
you may change the dimming step lcn/el when you adlust the brightness by
your controller/gateway
Parameter 9 Length: 1 Byte Valid Values: 1.99 [default : 1)
When the value is low, dimming/brightening is gradual.
When the value is high, dimming/brightening is rapid.
Parameter 10: Dimming/Brightening Step 'l'rming
You may change the dimming speed quicker or slower by changing Parameter 10.
Parameter l0 Lengthl Byte Valid Values: lr‘lO (default : 3)
When the value is low, the step timing ‘is quick.
When the value is high, the Step timing is slow
MANUALLV TURNING ON or OFF THE LIGHT SWITCH
when you want to manually turn ON the Smart Bulb whenever it is turned OFF
by a program or a remote control, flick the switch twice. The first flick will cut
power to the light and the 2nd flick will turn ON the light.
Vnu may manually switch OFF the light bulb
while keeping the Smart Bulb online in the
network and function as a ZrWave signal
repeater to maintain proper mesh network. The
function can be activated by flicking the wall
switch ”OFFrON” cycle two times within two
seconds. in other words, flick the SWitch four
times (OFFrUNrOFFrUNi. The Smart Bulb light ' err in
will be OFF while it maintains the function as a
ZrWave signal repeater and remains onllne to be
turned on by program or by an app wirelessly.
IMPORTANT NOTE:
To accomplish the repeater functionality other erave devises should be
powered-up state during inclusion of the Smart Bulb. It can make sure all [-wave
devises are in one network.
Picase note that it is extremely important to follow the above practice or to use
ONLV your preferred Wireless remote control device to turn ON or OFF the light
Without the electrical power to the light bulb, the Smart Bulb cannot be turned ON
remotely nor function as a signal repeater to maintain proper ZrWave network.
To avoid family members from accidentl turning OFF the power to the Smart
Bulb, install the optional clear cover that its over your wall SWitch included with
your product, Please refer to the separate installation sheet.
About the Z-Wave 500 Series Module with Z-Wave Plus features:
Vnu can use a ZrWave certified portable or static Controller to communicate with
the module, Depending on the capability of your controller or gateway software
the followrng simple to advanced operations may be performed. Please refer to
the controller or gateway manual for details.
l, Add (include) or Delete (Exclude) the Smart Bulb to/frorn your network
2. Turn On or off the Smart Bulb remotely
3. Assign the Smart Bulb to a specific Group/Scene and/or to include the bulb
as part of your ALL ON or OFF command.
4. OverrtherAir firmware update by your gatewa or static controller
5 Lifeline function which automaticall notifies t associated modules and
the netwod< that a manually reset evice is no longer in the network, thus
the corresponding association becomes invalid
NOTE:
Please note that like any other lights, the Smart Bulb Will be on after a power
failure. The smart bulb Will be low with full brightness after the power is
resumed if parameter t is not changed by the controller/gateway
SPECIFICATIONS
Model: ZRKSW / LBGSRSZ-l
lnput power: 120 VAC, at) Hz.
Brightness: bSO lumens (Equivalent to GSrWatt incandescent light bulb)
Power Consumptio 8.5w
Color Temperature: 2700K
Bulb Lifetime: Approx. 25,000 hours (Equivalent 223 years based on 3 hrs/dayr
Radio frequency: 9084 MHZ / 9l6 MHZ
Wireless range: up to 130 feet line of sight between the controller and the
other availab e nodes.
Normal operating temperature: 77“F [25“0
FOR INDOOR uSF ONLY
lnlernperahilily with ZrWave® devices
A ZrWave® network can integrate devices from various classes of products,
and these dwices can be made by different manufacturers. The domitech®
product introduced in this instructions manual has a ZrWave certification which
guarantees such an interoperability
ECC ID: IMMEZRKSW
The Federal Communication Commission Radio Frequency interference
Statement includes the followmg paragraph:
The equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant tn part is of the FCC Rules. these limits are
designed to provide reasonable protection against harmful interference in a
residential installation, This equipment uses, generates and can radiate radio
frequency energy and, if not installed and used ‘in accordance with the
instruction, may cause harmful interference to radio communication.
Howcn/er, there is no guarantee that interference Wlll not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures;
. Reorient or relocate the receiving antenna
. Increase the separation between the equipment and receiver
. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
r Consult the dealer or an experienced radio/TV techniCian for help
Operation is Subject to the following two conditions:
- This device may not cause interference
r This device must accept any interference, including interference that
may cause undesired operation of the device.
IMPORTANT NOTE:
To comply wrth the FCC RF exposure compliance requirements, no change to
the antenna or the device is permitted Any Change to the antenna or the device
could result in the device exceeding the RF exposure requirements and void
user’s authority to operate the device.
IC: 12320A-ZRKSW
This device complies with industry Canada licenserexempt KSS standardts).
Operation is subicct to the following two Conditions:
ti) This device may not cause interference, and
12) This device must accept any intericrence, including interference
that may cause undesired operation of the dwice.
ZrWavc is a registered trademark of sigma Designs
WARRANTY
Domitech Products warrants to the original purchaser of this product that for the
warranty period, this product Will be free from material defects in materials and
workmanship. The foregoing warranty is subject to the proper installation,
operation and maintenance of the product in accordance with installation
instructions and the operating manual supplied to customeh Warranty claims
must be made by customer in writing within 30 days of the manifestation of a
problem. Domitech’s sole obligation under the foregoing warranty is to repair
replace or correct any such defect that was present at the time of delivery or to
remove the product and to refund the purchase price to customer. The warranty
does not extend to consequential or incidental damage to other products that
may be used with this product, For inquiry and customer service, email to
support@doiriltechproducts.com
Warranty period: limited 1 year from date of purchase
Domitech Products, LLC
2l40 E Southlake Blvd. Suite Lr3‘l2
Southlake, Texas 76092
Smart Bulb,ZRKSW,0624ZOlS,En7le

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2015:08:07 14:23:06+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:08:07 14:23:06+08:00
Format                          : application/pdf
Title                           : ZRKSW Manual.pdf
Creator                         : Jacky Koo
Document ID                     : uuid:51e5f8f6-d5e6-45ad-8dd8-c16535f66134
Instance ID                     : uuid:cfb58f06-418d-4da4-aad3-d19454bda836
Page Count                      : 2
Author                          : Jacky Koo

EXIF Metadata provided by EXIF.tools