DONGGUAN ALLLIKE ELECTRONIC B103 Bluetooth Speaker User Manual SBT602 manual FINAL 10 9 13
DONGGUAN ALLLIKE ELECTRONIC CO.,LTD Bluetooth Speaker SBT602 manual FINAL 10 9 13
User Manual
SBT602 User Manual Charging the Bluetooth Speaker 1. Connect the small end of the USB charging cord into the Mini USB charging port on the back of the speaker. 2. Connect the other end of the USB cable to your computer’s USB port. 3. The indicator light on the front of the speaker lights up RED when charging. 4. The indicator light on the front of the speaker turns off when finished charging. Bluetooth Speaker On a Blackberry • Go to SETTINGS/OPTIONS > BLUETOOTH • Enable BLUETOOTH 3G Bluetooth Bluetooth: On Discoverable: Yes Paired Devices Powering ON/OFF • To turn ON, press and hold the [ ] button for 4 seconds. • To turn OFF, press and hold the [ seconds. Press the [ PLAY/PAUSE ] button to pause the music. Adjusting the volume Press and hold the [ VOL+] button to increase the volume and the [ VOL-] button to decrease it to your desired level. On an Android Phone • Go to SETTINGS > BLUETOOTH > MENU > Search Speaker USB Charging Cable 12:12 PM Bluetooth settings Bluetooth Device name NOTE: You may also adjust the volume from your mobile phone’s volume control. Answering / Ending a call Use the native controls on your mobile phone to answer and end a call. SBT602 SBT602 Visible Make device visible Search for devices Scanning Bluetooth devices In the box To make a call Dial the number and press the send button on your mobile phone. The call is automatically transferred to the speaker. PC Bluetooth Speaker Make sure you charge the speaker for 8 hours before using it for the first time. On other Cell Phones/Devices • Review the instruction manual that came with your phone/device. User Guide SBT602 User Guide Mini USB Charging Cable 3.5 mm Auxiliary Cable Location of Controls 1 2 Pairing the speaker with a Bluetooth enabled device 1. Turn the speaker on by pressing the [ ] Power ON/OFF button. If you’re using the speaker for the first time, press and hold the [ ] Power ON/OFF button to turn the system on. After 4 seconds the audible signal is emitted. 3. Press the [ Connect ] button. The Indicator light will flash BLUE and RED. 4. Keep the speaker and Bluetooth enabled device within 3 feet of each other during the pairing process. 5. Set your mobile phone or other Bluetooth enabled device to search for Bluetooth devices. On an iPhone • Go to SETTINGS > GENERAL > BLUETOOTH (Make sure Bluetooth is turned ON) 12:12 PM General Bluetooth VOL-] button: • Previous track (quickpress) • Decrease volume (hold) 2. [ VOL+] button: • Next track (quickpress) •Increase volume (hold) 3. [ ] button: Power ON/OFF 4. Indicator light 5. [ PLAY/PAUSE ] button: Play/Pause music 6. [ Connect ] button: Connect to Bluetooth 7. Audio socket 8. Mini USB charging port *Empty * Searching for devices 1 found Stop Bluetooth 6. When the Bluetooth enabled device finds the speaker, select SBT602 from the list of found devices. 7. If required, enter the password 0000. Select OK or Yes to pair the two units. 8. After a successful registration, the LED Indicator light will flash BLUE. Note: If the speaker has already been connected to the Bluetooth device/phone, press the Power button on the speaker for 4 seconds to turn on the speaker again. The speaker will reconnect with the Bluetooth device/phone automatically. within 3 feet 1. [ Bluetooth: Enabled Paired Devices: Caller ID The speaker will read out the phone number of any incoming calls while connected to a Bluetooth enabled device. NOTE: If your phone is set to answer within a few rings, it will answer and go to voicemail before the number is read allowed. Be sure to set your amount of rings higher on your mobile phone if you want this feature to work correctly. 2. The Indicator light will flash BLUE twice, followed followed by a RED flash. Play / Pause To resume music playback, press the [ PLAY/PAUSE ] ON Devices SBT602 Paired The screenshots above are typical of many Bluetooth enabled devices in the market today, and are used to assist in the explanation of the pairing process. Your Bluetooth enabled device’s interface and interaction with the Bluetooth Speaker may slightly differ from the illustrations above. Cable Connection To listen to music using a wired connection, connect your music device to the audio port using the included audio cable. NOTE: The Audio port does not work as a headphone jack. Whenever you connect the audio cable, the status indicator will light up BLUE. The functions on the speaker will not work with the cable connected. Playing Music To enjoy wireless music on your Bluetooth Speaker, make sure you are connected to a Bluetooth enabled device. Once connected you can press PLAY on your Bluetooth device or you can press the [ ] button on the SBT602 Bluetooth Speaker. Now discoverable Once playback has begun, you can control the music or answer phone calls from the control buttons of the Bluetooth speaker (with devices that have the AVRCP Bluetooth profile). Safety and operating instructions should be retained for future reference. • Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, or the unit has been exposed to moisture. Adjusting the volume • To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. The unit must not be exposed to dripping and no object filled with liquids, such as a vase, should be placed on the unit. Press and hold the [ • Please keep the unit in a well-ventilated environment. button again. volume and the [ Mini USB Charging Port Bluetooth Speaker Most media enabled smart phones will display “Connected to phone audio and media” when connecting to the Bluetooth Speaker. This means you can make phone calls and enjoy your music. ] button for 3 Add New Device SBT602 The USB cable can only be used for charging, not for any data transfer. User Guide Safety instructions Using your Bluetooth Speaker VOL+] button to increase the VOL-] button to decrease it to your desired level. NOTE: You may also adjust the volume from your mobile phone’s volume control. • No naked flame sources such as candles should be placed on the unit. • Disposal of this product should be in accordance with local regulations. If you are not sure how to proceed, contact your local authority. • Clean only with a slightly moist, lint-free cloth. Skipping Songs (With devices that have AVRCP Bluetooth profile) Quickpress the [ VOL+] button to go to the next song Quickpress the [ VOL-] button to go to the previous song. Receiving calls When receiving a call, the music will stop playing automatically. You can transfer the call from the speaker to your phone, or you can power off the speaker for a private conversation. Once the call has ended, use your mobile phone to continue music playback. Troubleshooting Tips I can pair the Bluetooth Speaker with my Bluetooth device, but I cannot hear any music? 1. Make sure your Bluetooth device supports A2DP profile. 2. Turn up the volume on your Bluetooth device. 3. You may have to unpair the speaker, then re-pair to your device. I cannot get the Bluetooth Speaker into Pairing Mode. 1. Make sure the Bluetooth Speaker is turned ON before beginning the pairing process. 2. Press and hold the [ ] button. The LED indicator light on the front of the speaker will flash RED and BLUE alternately. 3. The speaker is now in pairing mode My Bluetooth Device is not able to pair with the Bluetooth Speaker. 1. Make sure the Bluetooth Speaker is turned ON before beginning the pairing process. 2. Keep your Bluetooth Speaker and Bluetooth enabled device within 3 feet of each other during the pairing process. 3. Press and hold the [ ] button. The LED indicator light on the front of the speaker will flash RED and BLUE alternately. 4. Check that YOUR device’s Bluetooth feature is turned ON. 5. Try repeating the pairing process, see “Pairing the Speaker with a Bluetooth enabled device”. • Do not install near any heat sources such as radiators, stoves or other apparatus that produce heat. • Only use attachments/accessories specified by the manufacturer. Legal information FCC Part 15: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Do not attempt to repair or modify this equipment. Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Limited Warranty TO OBTAIN WARRANTY SERVICE: ● Provide proof of the date of purchase within the package (Dated bill of sale). ● Prepay all shipping costs to the authorized service center, and remember to insure your return. ● Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package. ● Describe the defect or reason you are returning the product. Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier. The shipping address of the authorized service center is: Southern Telecom, Inc. Attention: Customer Service (2nd Floor) 14-C 53rd Street Brooklyn, NY 11232 Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. IT’S AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limations on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Should you have any questions or problems concerning this product, please contact our customer service department at: Customer Support: 1-877-768-8483 (Toll Free) cs@southerntelecom.com Monday – Friday: 8AM – 10PM (EST) 90 Days Limited Warranty In the unlikely event that this product is defective, or does not perform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange. www.southerntelecom.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Format : application/pdf Title : SBT602 manual FINAL 10-9-13 Creator Tool : Adobe Illustrator CS5 Create Date : 2013:10:09 17:46:44-04:00 Modify Date : 2013:10:09 17:46:44-04:00 Metadata Date : 2013:10:09 17:46:44-04:00 Thumbnail Width : 256 Thumbnail Height : 160 Thumbnail Format : JPEG Thumbnail Image : (Binary data 17805 bytes, use -b option to extract) Document ID : xmp.did:E1F836CEF730E311B95ED0FB54A4E89A Instance ID : uuid:12b18598-ccf7-412f-b98a-c3419e3cee84 Original Document ID : uuid:3F07BBA8B377DE119111A0FD5746865B Rendition Class : proof:pdf Derived From Instance ID : uuid:1133b82f-e1a3-413b-b0c7-06509d571765 Derived From Document ID : xmp.did:DBF836CEF730E311B95ED0FB54A4E89A Derived From Original Document ID: uuid:3F07BBA8B377DE119111A0FD5746865B Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:272692AD95E3DF118946E8C8DCA382AE, xmp.iid:BB0C5E3BDCFEE2118DDBD84400E5262C, xmp.iid:5EE5214F842BE311A6FE9F2C3E12E73C, xmp.iid:DAF836CEF730E311B95ED0FB54A4E89A, xmp.iid:DBF836CEF730E311B95ED0FB54A4E89A, xmp.iid:E1F836CEF730E311B95ED0FB54A4E89A History When : 2010:10:29 12:54:02-07:00, 2013:08:07 09:32:42-04:00, 2013:10:02 13:01:41-04:00, 2013:10:09 11:32:24-04:00, 2013:10:09 14:29:46-04:00, 2013:10:09 17:46:42-04:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows), Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, / Startup Profile : Print N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 66.787517 Max Page Size H : 42.443404 Max Page Size Unit : Centimeters Font Name : ArialMT, MyriadPro-BoldIt, MyriadPro-Bold, MyriadPro-It, MyriadPro-Regular, Myriad-Bold, Myriad-Roman, Wingdings-Regular, UniversLT-Light, UniversLT-Bold, UniversCE-Light, UniversCE-Bold, HelveticaNeue-Bold, HelveticaLT, Helvetica-Bold, Helvetica, EurostileRegular, HelveticaNeueLTStd-Lt Font Family : Arial, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad, Myriad, Wingdings, UniversLT Light, UniversLT Bold, UniversCE Light, UniversCE Bold, HelveticaNeue Bold, HelveticaLT, Helvetica Bold, Helvetica, EurostileRegular, HelveticaNeueLTStd Lt Font Face : Regular, Bold Italic, Bold, Italic, Regular, Bold, Roman, Regular, Light, Bold, Light, Bold, Bold, Bold, Lt Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Type 1, Type 1, Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown Font Version : Version 5.10, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, 001.001, 001.001, Version 5.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, MyriadPro-BoldIt.otf, MyriadPro-Bold.otf, MyriadPro-It.otf, MyriadPro-Regular.otf, wmb_____.pfb; wmb_____.pfm, wmr_____.pfb; wmr_____.pfm, wingding.ttf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 10 C 1, PANTONE Cool Gray 11 C, PANTONE Black C, PANTONE Cool Gray 10 C, PANTONE 123 C, PANTONE 2995 C, PANTONE 186 C Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE Cool Gray 10 C 1 Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 2.000000 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 60.000002 Producer : Adobe PDF library 9.90 Page Count : 1 Creator : Adobe Illustrator(R) 15.0 For : Meisje Regensburg, Bounding Box : 142 -1150 1943 -23 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools