DONGGUAN ELE ELECTRICAL TECH ES051B Bluetooth Speaker User Manual STICKY DUDE
DONGGUAN ELE ELECTRICAL TECH.,LTD. Bluetooth Speaker STICKY DUDE
Manual
01 02
03 04 05 06
O P E R A T I O N
O P E R A T I O N O P E R A T I O N S P E C I F I C A T I O N
1
2
3
4
5
6
7
8
1 2 4
3567
8
Printed in China
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment genrates,uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
●Reorient or relocate the receiving antenna
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on circuit different
from that to which the reciver is connected.
●Consult the dealer or an experienced radio/TV technician for
help.
Recharging the battery
The unit has a built in DC 3.7V, Li-polymer rechargeable battery, recharge as follows:
1.Connect the speaker to a computer or any USB charger using the supplied
connection cable.
-Connect the Micro USB plug form the supplied connection cable to the Micro USB
port on the speaker.
-Connect the full size USB plug to the USB port on a computer or any USB charger
with DC 5V, 300mA(or more than 300mA) output.
2.While charging,the Charging Indicator light on the bottom of the speaker will illuminate.
When charging is complete,the light will turn off.
Location of Controls: BT(Bluetooth )mode
The first time you use the speaker or pair it to a new Bluetooth device, please follow
these instructions:
1.Slide the Power ON/OFF switch to the ON position.The indicator on the bottom of
the speaker will light up and blink.
2.Power on the external Bluetooth Device and enter searching mode. Begin pairing by
following the on screen instructions from the external Bluetooth device. After pairing,
the Indicator on the bottom of the speaker will stop blinking.
4.During Playback:
●Press and hold the “-”or “+” Buttons to adjust volume level.
●Press the “ ” button to pause; press again to resume normal playback.
●Press and release the “-”or “+” Button repeatedly to skip tracks.
5.If the unit is paired to Cell Phone:
When you receive an incoming call while listening to music, press the button to
pause the music and answer the call. When your call is complete, press the
button to end the call and resume the music.
6.When finished listening, slide the Power ON/OFF Switch to OFF position to shut
off the unit.
AUX Mode
1.Connect the 3.5mm stereo jack from the included connection cable to the AUX
out/Line Out/Phone jack on the external audio player. Connect the Micro USB plug
from the included connection cable to the Micro USB port on the speaker.
2.Slide the Power ON/OFF switch to the ON position. The Indicator on the bottom of
the speaker will light up. Now your music will play.
3.To adjust the volume, use the volume controls on the connected external audio
player. The volume+/- buttons on the speaker will not work when you’re in AUX
Mode.
4.When finished listening,slide the Power ON/OFF Switch to OFF position.
IMPORTANT:
If the Micro USB plug from the included connection cable was inserted into the
Micro USB port on the speaker, the Bluetooth function will cut off automatically. Unplug
this cable before using the Bluetooth function.
Specification:
Power source:---Built in DC 3.7V, Li-polymer rechargeable battery. Recharge
by DC 5V, 300mA from Computer or USB charger through Micro USB port
(Computer and USB Charger not included).
Audio Power:------1.75W(RMS)
Speaker Impedance-----4Ohm, 3W
Note: The specifications are subject to change without notice.
Accessories:
1x User’s Manual
1x Charging and Audio Connections Cable
Notes：
-When pairing this speaker to your Bluetooth Device, you will need to select BT pairing
name “STICKY DUDE”
-You may also need to enter the pairing code “0000”
Normal Operation After Pairing:
1.Turn on the Bluetooth function of the external Bluetooth device.
2.Slide the Power ON/OFF switch to the ON position. The indicator on the bottom of
the speaker will light up and blink. Wait until the unit is paired with the external
Bluetooth Device (this will take a few seconds and you will know it’s complete when
the indicator light stops blinking).
3.Now you’re ready to play your music!
: Skip Backward/Volume Down Button
: Play/Pause Button
: Skip Forward/Volume Up Button
: Built-in Microphone
: Micro USB Port (For charge and AUX in only)
: Power ON/OFF Switch
: Indications (Bottom of unit)
: Cover:Please be sure to open the cover before powering the unit ON/OFF or
before making connections.
Notes:
Your battery will last longer if you follow these simple guidelines for charging and
storing.
A.For charging the first time, charge it at least 10 hours.
B.Recharge and store the unit within the temperature range of 5 C~35 C(40 F~95 F)
C.Do not over charge (longer than 24 hours). Excessive charging may shorten the
battery life.
D.Battery life naturally shortens slowly over time.
E.The rechargeable battery incorporated in this product is not user replaceable.
FCC WARNING:
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the instruction manual.
Modifications not authorized by the manufacturer may void users authority to
operate this device.
FCC INFORMATION:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.