DONGGUAN HOPESTAR ELECTRONIC MAX-2X36W FLUORESCENT ELECTRONIC BALLAST User Manual file

Download:
Mirror Download [FCC.gov]
Document ID	839029
Application ID	D6dPo6NJDgT2Ao/BveaElQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.77kB (59687 bits)
Date Submitted	2007-09-05 00:00:00
Date Available	2007-09-05 00:00:00
Creation Date	2007-09-03 17:29:13
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-09-05 16:16:01
Document Title	Microsoft Word - file.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	owner

东莞市隆迪电子科技有限公司
Dongguan Hopestar Electronic Co., Ltd.
Electronic ballast instruction manual
Warning
To avoid the risk of electric shock,do not disassemble or refit this ballast.
Please consult a qualified electrician for installation and wiring.
Do not install on the tinder surface.
Do not expose to rain or water logging.
Please use the designated type lamps,otherwise the product will be damaged completely.
Make sure the power is off before installing or maintenance this ballast.
Installation
Shut off the power supply.
Prepare the necessary tool and material(such as:wire cutters,screwdriver, insulating tape)
According to the product’s power and type lampes to prepare lamps.
According to the product’s dimension and mounting loles to detemine the correct installation place.
According to the wiring instruction of product label turn on power.
Check and make sure the wiring is correct before turn on power.
Operation＆maintenance
Power on and off control by the wall switch, turn power on to let ballast operate.
In order to prolong lamp’s life ,not to turn power on and off again and angain in a short time.
The lamp is wearing parts, it needs periodic replacement, make sure the power is off before replacing
The lamp.
The product has protection function for lamp abnormity(end of life, diop out or break).
Replace it when the lamp becomes flicker or darkening.
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two
conditions:(1)this device may not cause harmful interference, and(2) this device must accept any
interfere received, including interference that may cause undesired operation.
FCC NOTE
The manufacture is not responsible for any radio or TV interference caused by unauthorized
Modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
This product may cause interference to radio equipment and should not be installed near maritime safety
communications equipment or other critical navigation or communication equipment operating between
0.45—30 MHz.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:09:03 17:29:13+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:09:05 16:16:01+08:00
Metadata Date                   : 2007:09:05 16:16:01+08:00
Format                          : application/pdf
Creator                         : owner
Title                           : Microsoft Word - file.doc
Document ID                     : uuid:0d8914d6-c8e4-4c9e-a4e1-92f8f57d4bb2
Instance ID                     : uuid:4e3684a0-c65e-4726-81ab-e5b151e4f9e2
Page Count                      : 1
Author                          : owner

EXIF Metadata provided by EXIF.tools