| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3937638 |
| Application ID | OfEwzajl4VLRuCln9TbY6w== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 215.9kB (2698755 bits) |
| Date Submitted | 2018-07-25 00:00:00 |
| Date Available | 2018-07-25 00:00:00 |
| Creation Date | 2018-07-19 20:34:51 |
| Producing Software | Adobe Acrobat 11.0 Image Conversion Plug-in |
| Document Lastmod | 2018-07-19 20:35:02 |
| Document Title | Users Manual |
| Document Creator | Adobe Acrobat 11.0 |
Double E
USER MANUAL
Fit for Model No.E527 series.
figs?
Main parameters
Material‘ plastic and electronic components
Balteri -: Carbattery: 4,3v AA rechargeable battery:
Remote controller battery: 2 pcs of 1.5V AA batteries,
Turn On/OFF Horn Key
DEMO ,‘ Siren Key
Left Trigger Right Trigger
Scaling Ladder Up 8: Down Left/Right Rotation
pumps, Key Indicator
Battery Installation
1,0pen the cover of battery case locates in the back of controller, inserts 2 pcs of
1.5v AA batteries into the battery case, and then screw the cover (Fig 2A),
2, Please screw out the cover at the back of car by screwdriver, open the cover as
the arrow showed, insertlpcs ot4.8VAAbattery, then screw the cover
(Fig 25),
Charger Battery
screwdin c.
rigzrt Fig 25
Notice: This product shall be charged for two to threehours,The supporting USE
chargershall not be used for other devices other than this product.
Installing the sprinkler head and filling the water tank
1. open the colorful box, unpack the blister packing in the upper left corner of
the remote control can take the Car out, rotate the fountain, and install the
sprinkler head. (Fig 3A)
2. To operate the function of spraying, open the water tank and fill it with clean
water (in order to avoid damaging the car, the water tank should be empty,
when the remote control car is not used or the function of spraying is not
performed [or a long period). (Fig 313)
tentteriiiiing tiriie
Fig 3A Fig 3B
2.4G Auto Coding
l.After installing thebatteries on the car and the
remote controller, turn on the power ofboth,
There is a sound of D1 from the car, and the
indicator on the remote controller and the
lights on the car would be flashing slowly. FigsA
That means the car is in a state of coding, the a k d
auto-codin would be successful if the car was} if
with DI-Dlgsound. M "We” ._ -’
2.Each remote controller could be only coded
with one car. There is no any interference if not)
auto-codingis success. “855
ruinrtight
3.It could be reraumrcoded with other car or
remote controller by turning off the power of N"
Basic Operali0n&Functions riiintrii
rigsc
1.Tum ON/OFF
o Press the ON/Ol-‘F key, there will beastart-up sound;to press the key again after
starting, (PigSA)
2.Horn Key
0 To press the Horn Key on remote controller after starting the car, the car would
emit a simulated sound,
3.Forward/Backward
0T0 push the Left Handle forward/backward, the Car would go forward/backward,
(Fig SB) héfidegrecRoialtoli
4.Turn Left/Right x, we,
'To push the Left Handle forward/backward, Right
Handle turns left/right, the Car would turn
left/right. (Fig 5C).
Fig 5D
u snow", insoui
o stating ladder
5. 660 degree Rotation of Operation Station
0 After starting the car, to press the Left/Right
Rotation, the Operation station would do a
motion of left/right rotation with sound. At the l’
same, the alarm light on the top of the cab would
flash and the lights of front and back would light Fig 5E
on(Fig 50),
6.Up&Down, ln&Out of Scaling Ladder
a After starting the car, to press the key of Up8r
DownoiScaling Ladder, the scaling ladderoi ‘
the fire truck would raise up (come down) slowly;
at the same time, the second condole would I, 9
hand over(draw back) slowly with a series of test
mechanical sound, flashing lights at the top of cab, lighting up of the front and
back lighls(l-'ig 5E),
7.Siren
0 After starting the fire truck. press the Siren Key, the fire truck would emit a
sound for alarming. At the same time, the light at the top of cab would flash up.
To press the key again, it could be switched to the sound of standby.
8.5imulated Pumper Function
- Press the spray button in the remoter, the sprinkler head sprays water, when loosen
the spray button, the sprinkler head stops spraying water (on the condition that
there is water in the water tank)
These functions could be multiple used for simulating operation.
Advanced Functions
1.Mute Switch
- After starting the truck, to press the Hornkey fora long time, the car could
change to a mute condition. To press the Horn key again, it could be switched to
the Sound station.
2.DEMO Function
0 To press the DEMO key, the car could operate a series of the functions
automatically: to exit this function through pressing any key.
3. Auto off
- After turning on the remote controller, the car would be auto off without receiving
any signal from the remote controller by éosec.
4.Bral
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Create Date : 2018:07:19 20:34:51+08:00
Creator : Adobe Acrobat 11.0
Modify Date : 2018:07:19 20:35:02+08:00
XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date : 2018:07:19 20:35:02+08:00
Creator Tool : Adobe Acrobat 11.0
Format : application/pdf
Document ID : uuid:f54249a3-58e8-45a3-8279-30939b0465b9
Instance ID : uuid:31c22324-ba6a-4a15-9775-0e71c98dca2f
Producer : Adobe Acrobat 11.0 Image Conversion Plug-in
Page Count : 1
EXIF Metadata provided by EXIF.tools