DOUBLEEAGLE INDUSTRY SY-E562-003 Radio Control Toys User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3935159
Application ID	Tbbqt6/LGi/EhIF2L6zSpA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	190.39kB (2379880 bits)
Date Submitted	2018-07-23 00:00:00
Date Available	2018-07-23 00:00:00
Creation Date	2018-07-13 18:01:02
Producing Software	Adobe Acrobat 11.0 Image Conversion Plug-in
Document Lastmod	2018-07-13 18:01:11
Document Title	Users Manual
Document Creator	Adobe Acrobat 11.0

USER MANUAL
Main parameters
Item NO E562-003 DoubleE
Materi lastlc and electronic components
Batteries: Car battery: 2 pcs 4.8V AA rechargeable battery;
Remote controller battery: 2 pcs of 1 .5V AA batteries.
Body ofcode button
Match Key of Head-stock 5999‘} Match Key of Car Body
Tractor Up Tractor Close
LeftTrigger (9— RightTrigger
Holder Up ‘Skew Plate Down
Holder Down Skew Plate Up
a Battery Installation
1.0pen the cover ofbattery case locates in the back ofcontroller, inserts 2 pcs of 1 .5v AA
batteries into the battery case, and then screw the cover (Fig 2Ai.
2.Piease screw out the cover at the back of car by screwdriver. open the cover as
the arrow showed, insert 2pcs of4.B VAA battery, then screw the cover trig 25),
rCell cuter Cell cover1 " ',
‘" Emery Charger
7 t
Screwd rive r
Fig 2A Fig as Fig 2c
Screw-socket
Notice: This productshali be charged for twoto threehours.The supporting use
chargershall not be used for otherdevices otherthan this product
2.4GHz Auto Coding
instruction of 2 to Auto—matching.
l:Auto-matching of tractor: Insert the batteries Into the tractor and the remote controllerthen
switch them on. Autovmatching offlat bed body: insert the batteries into the flat bed body and
the remote controller. then switch them on.
2 One remote controller can only match with one car After the success of matching, there is
no interference between each car,
3 If the remote controller does not receive any 2.46 signals from the carfbr one minute, it
would automatically turn to a sleeping state(indicator light off) Press any key to re-activate
4 Turn offthe power of both the remote controller and the car so thatthey can rematch With
another car/controller,
n Basic Operation 8. Functions
1,Turn ON/OFF
- To press the ON/OFF key, there would be a start»up
sound, to press the key again after starting to turn
off the power
2.Horn Key
- To press the Horn Key on remote controller after starting the car, the car would emit a
simulated sound.
3.Forward/Backward
ITo move the Left Handle forward/backwardthe car would go forwardlbackward.(Fig 4A)
4.Turrt Left/Ri ht
0 To move the eft Handle forward/backward, Right Handle turns left/right,
the car would turn left/right. (Fig AB).
Backward Turn Right _
I - “' $35,.” — J
~ . c . c Hi J
flats 4: ring! in: 2g» ——
Forward: FlgAA Write“ [Pigab “a
5. Holder Up/Down, Tractor ON/OFF (Fig AC) '
l Holder Down: the holderwould go down slowly by
pressing the Holder Down button after starting.
0 Tractor On: After starting, to press the Tractor On button,
the lights are on and the tractor has a sound of working
like “hu-hu»“. To release the button, the tractor makes a
sound ofen ine-offand then the tractor down.
I Tractor OF :After starting, to press on the Tractor OFF
button, the lights are on and the tractor have a sound of
working like‘hu-hu-“. To releasethe button, thetractor
makes a sound ofengineaoff,
0 Holder Up: After starting, to press the Holder Up button,the holderwould go up
slowly.
6. Skew Plate Up/Down
'fikegvtFt'late Up: the skew plate would go up slowly after pressing the Skew Plate
p u on,
oSkew Plate Down: the skew plate would go down slowly after pressing the Skew
Plate Down button.
a Advanced Functions
1.Auto off
. After turning on the remote controller, the car would be auto off without reserving any
signal from he remote controller by 60sec.
2.Multi-playing function
.Tt‘le productls remote controlled byZ 4GHZ, so many cars could be played together by
p ayers
a Recharging
Notice Please push the power switch to“OFF"positi0n if the product Will not be used for a
long time. Take the batteries out ofthe remote controller and the truck for storing. Please
charge the battery for4 to 5 hours, 5 hours for initial use
Notice
1 Don't play the toy on the road, select a safe place for operating to avoid dangerous
2 Plays the toy in water may cause shortrcircuit damage Please use the dry cloth to clean
the car.
3.lf abnormal speed or reaction, it may be because of insufficient battery power. please
charge the battery.
4.The batteries should be charged under adult supervision. Please use the batteries
recommended.
5.Please install the battery in a correct polarity.
6.Do not mix new and old batteries together, shortacircuited.
7.Please charge the battery before initial use
a.Please check the plug. case and other units orcharger regularly to make sure that it is
not broken Don‘t use again if you find abnormality of the charger.
9 Please do not connect the product to different performance power.
Frequency bands : 2405MHZ to 2475MHz
Maximum output power : -5.7dBm For EU
Manufacturer: Doubleeagle Industry (China) Limited,
Address : Xingda Industrial Park, Chenghai
District, Shantou City, Guangdong Provrnce, China.
Importer : JAMARA e,K.
Address : lnh, Manuel Natterer
Am Lauerbuhl 5 - DE-88317 Aichstetten Germany
CHOKING HAZARD-small parts, not for children under3 years.
changes or modifications not expressly approved by the party responsible
forcompliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply With the limits for a
Class B digital device, pursuantto Part 15 of the FCC Rules, These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipmentgenerates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particularinstallation.
lfthis equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment offand on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-— Increase the separation between the equipment and receiver.
-— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected,
7 Consultthe dealeroran experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:07:13 18:01:02+08:00
Creator                         : Adobe Acrobat 11.0
Modify Date                     : 2018:07:13 18:01:11+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:07:13 18:01:11+08:00
Creator Tool                    : Adobe Acrobat 11.0
Format                          : application/pdf
Document ID                     : uuid:9d897131-3d6f-4192-bc1c-be2e1b28ed62
Instance ID                     : uuid:5d40370a-7ad6-4705-8738-658496751c4f
Producer                        : Adobe Acrobat 11.0 Image Conversion Plug-in
Page Count                      : 1

EXIF Metadata provided by EXIF.tools