DQ Technology 708 ADSL Modem User Manual Manual VisionNet708

DQ Technology, Inc. ADSL Modem Manual VisionNet708

Contents

Users Manual Part 1

Download: DQ Technology 708 ADSL Modem User Manual Manual VisionNet708
Mirror Download [FCC.gov]DQ Technology 708 ADSL Modem User Manual Manual VisionNet708
Document ID270539
Application IDnNM/yjuqEE7C4la5sNU19A==
Document DescriptionUsers Manual Part 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize315.78kB (3947259 bits)
Date Submitted2002-09-16 00:00:00
Date Available2002-09-16 00:00:00
Creation Date2002-09-16 10:51:49
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod2002-09-16 10:52:44
Document TitleManual_VisionNet708_.PDF
Document CreatorMicrosoft Word
Document Author: moon

VisionNet 708
User’s Manual
VisionNet 708 ADSL Ethernet Modem
A D S L Modem Manual
Copyright
2002 DQ Technology Inc.
All Rights Reserved.
No part of this publication may be reproduced or distributed in any form or by any means, or stored in a
database or retrieval system, without the prior written permission of DQ Technology, Inc.
A D S L Modem Manual
Contents
Chapter 1.
Introduction
▣ What is ADSL -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
▣ VisionNet 708 Layout and LED Description -- - - - - - - - - - - - - - - - - - 6
▣ VisionNet 708 Specification ------- - - - - - - - - - - - - - - - - - - - - - - - - 9
Chapter 2. Before Installation
▣ Safety Check- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 1
▣ The climate condition Check- - - - - - - - - - - - - - - - - - - - - - - - - - - 1 1
▣ System Requirement Check - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 2
▣ VisionNet 708 Package Check - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 3
Chapter 3. Installation Of VisionNet 708
▣ Installation VisionNet 708 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 5
▣ Connect and Disconnect the Internet - - - - - - - - - - - - - - - - - - - 3 0
A D S L Modem Manual
Chapter 1.
Introduction
This chapter provides the brief concept of ADSL, and the external form and specification of
VisionNet 708.
This chapter covers the following topics:
◈ What is ADSL
◈ VisionNet 708 Layout and LED Description
◈ VisionNet 708 Specification
A D S L Modem Manual
◈ What is ADSL
ADSL (Asymmetric Digital Subscriber Line) is a technology for transmitting digital information
at a high bandwidth on existing phone lines to homes and businesses. Unlike regular dialup
phone service, ADSL provides continuously available, "always on" connection. ADSL is
asymmetric in that it uses most of the channel to transmit downstream to the user and only a
small part to receive information from the user. ADSL simultaneously accommodates analog
(voice) information on the same line. ADSL is generally offered at downstream data rates from
512 Kbps to about 8 Mbps, upstream data rates up to 1Mbps.
ADSL was specifically designed to exploit the one-way nature of most multimedia
communication in which large amounts of information flow toward the user and only a small
amount of interactive control information is returned.
A D S L Modem Manual
◈ V isionNet 708 Layout and LED Description
VisionNet 708 (Front view)
A D S L Modem Manual
Location
Label
Status
Description
①
POWER
VisionNet 708 power status
It’s On when VisionNet 708 is
connected to PC which is working.
②
USB
USB is awake
USB connected PC which is working
③
Tx/Rx
Data transmission
It’s flashing whenever data is
transmitted over VisionNet 708
④
SYNC
ADSL Line initialization and
synchronization
⑤
LAN
VisionNet 708 LAN status
It’s remain on after ADSL line
synchronization achieved
It’s On when VisionNet 708 is
connected to PC LAN which is
working.
⑤
PPP
PPP Connected status
It’s On when VisionNet 708 is
connected to PPP which is working.
뒷 면
Location
Lable
①
LINE
②
PHONE
Port
Function
ADSL Line Port Connects telephone Line cable in ADSL line.
Telephone
Connects the telephone cable in your
Connection Port telephone.
③
Console
Console Port
Console Setting Port.
(Option)
④
Ethernet
Ethernet Port
Connects Ethernet cable from the LAN port in
your PC.
⑤
USB
USB Port
⑥
DC IN
DC IN Port
⑦
Power
Power Switch
Ethernet Firmware Upgrade (Option)
Connects Adaptor
VisionNet 708 Ethernet Power On/Off
A D S L Modem Manual
◈ V isionNet 708 Modem Specification
Specification
Size (outfit)
Power (V / A)
Operating
Temperature
ADSL Standards
compliant
Connection Speed
Modulation
200mm X 147mm
600mA 18V
5℃ ~ 45℃
ANSI T1.413 Issus 2, ITU G.DMT(G.992.1), ITU G.Lite(G.992.2)
Down Stream(Rx) : 8Mbps(Max) , Up Stream(Tx) : 860Kbps (Max )
DMT (Discrete multi-tone)
Telephone Line(RJ 11) connector 2 port , Ethernet 1 port,
Connector
USB Line 1 port,
Interface
Operating System
Ethernet Interface
Windows 98/ 98SE/ME/NT 4.0/2000/XP, Macintosh, Linux, UNIX compliant
PPP Over ATM (RFC 2364)
Protocol
Bridged Ethernet Over ATM (RFC 1483)
Classical IP Over ATM (RFC 1577)
P V C value range
VPI: 0~255 , VCI :0~65,535
<>
The connection speed of VisionNet 708 may vary depending on your ADSL service, the
ADSL line condition, your PC specification and the distance between ADSL modem and
Central Office of your local ADSL service provider.
A D S L Modem Manual
Chapter 2.
Before Installation
This chapter provides basic safety information before installation. Please read this chapter very
carefully before installation.
This chapter covers following topics :
◈ Safety Check
◈ The climate condition Check
◈ System Requirements Check
◈ VisionNet 708 Package Check
A D S L Modem Manual
◈ Safety Check
Before installing and using VisionNet 708, please the following topics must be checked first.
★ Safety check related to the electricity, heat and water.
☞ VisionNet 708 is Ethernet type ADSL modem, so you must connect VisionNet 708 to the
Ethernet Port in your PC.
☞ VisionNet 708 must be located in safe space such as near non-grounded extension
cable, torn power cable and very close to the power outlet.
☞ VisionNet 708 generates the heat when it is operating. It must not be exposed to heat
trap conditions.
☞ It must not be used near water, like a bathtub, kitchen sink or in a wet basement.
These environments could damage VisionNet 708 or effect the performance of VisionNet
708.
◈ The climate condition Check
For installing VisionNet 708 in safe and being used properly, please be aware of the climate
Condition first.
VisionNet 708 is connected either Desktop PC or Laptop PC, so check the climate conditions
of your PC and follow those instruction first.
It’s recommendable that VisionNet 708 is being used in same temperature and humidity.
The range of operating VisionNet 708 is
☞ Operating temperature : 5 ~ 45 ℃
☞ relative humidity : 10 ~ 85 % (non-condensation case)
10
A D S L Modem Manual
◈ System Requirements Check
Before installing and using VisionNet 708, please the following topics must be checked first.
★ PC Operating System
☞ Windows 95
☞ Windows 98
☞ Windows 98SE
☞ Windows Millennium Edition
☞ Windows 2000 Home Edition & Professional
☞ Windows XP Home Edition & Professional
☞ Macintosh, Linux, UNIX
System Specification (Recommended).
The performance of VisionNet 708 depends on your system specification, s o
following
specification is recommended.
◉ OS : Windows 98/98SE
◉ CPU :Pentium III 350MHz or higher
◉ System Memory(RAM): 64MB or higher
◉ LAN Card : Connect Ethernet Port
11
A D S L Modem Manual
◈ V isionNet 708 package Check
When opening VisionNet 708 Package, please check the following items in the Package.
VisionNet 708 (ADSL Ethernet Modem)
User’s manual
Direct UTP Cable (RJ-45)
Power Adaptor
USB Cable (USB-AB)
Items : Quantity
VisionNet 708 (ADSL Ethernet Modem) : 1
Power Adaptor
:1
USB Cable (USB-AB)
: 1개
User’s manual
:1
Direct UTP Cable (RJ-45)
: 1
Telephone Line Cable (RJ-11)
:1
Manual and USB Driver CD
:1
12
CD
Telephone Cable (RJ-11)
A D S L Modem Manual
Chapter 3.
Installation of VisionNet 708
This chapter provides the brief concept of ADSL, and the external form and specification of
VisionNet 708.
This chapter covers the following topics:
◈ Installation VisionNet 708
◈ Connect and Disconnect the Internet
13
A D S L Modem Manual
◈ Installation VisionNet 708
1. Start Internet Explorer to view or reset the configuration of the ADSL
And type 10.0.0.2 at [Open] and click [OK] button.
2. Enter “a d m i n ” at [User Name], “v i s i o n n e t ” at [Password] as below and
click [OK] button to proceed.
14
A D S L Modem Manual
⑴ ADSL Home Page : appearing home page of VisionNet 708 ADSL and Device,
DSL, WAN Interfaces, LAN Interfaces, Services Summary
15
A D S L Modem Manual
⑵ DSL : You can find the connecting of ADSL and CRC, HEC
⑶ ATM VCC : Circumstance in ATM VCC Configuration you can set the Value of VPI VCI
16
A D S L Modem Manual
⑷ Bridging : You should use Enable when you do the EoA(Bridge Mode) in
Bridge configuration.
17
A D S L Modem Manual
⑸ LAN : You can find and adjust the IP Address and Subnet Mask of LAN in
LAN Configuration, the IP Address and Subnet Mask of USB in
USB Configuration.
18
A D S L Modem Manual
⑹ NAT : If you use the ADSL in Router, [NAT] should be in condition “Enable”
- NAT Configuration
⑺ DNS : In DNS Configuration. You should set the [DNS Sever] when using static
19
A D S L Modem Manual
IP(IPoA) (Provided by ISP)
⑻ Commit & Reboot : It is Saving the adjust of ADSL click the [commit] button.
20
A D S L Modem Manual
⑼ PPP : PPP Configuration set the PPPoA & PPPoE of ADSL.
After adjusting you should click the [Submit] button, and change the [Commit&Reboot],
you should saving the configuration in circumstance of Commit and Reboot
21
A D S L Modem Manual
⑽ User Password Configuration : This page is modify [User Password] of ADSL.
You be sure that click [Submit] button, and save that you did in [Commit & Reboot].
1. Using t h e P P P ( P P P o E & P P P o A ) M o d e
22
A D S L Modem Manual
1-1. Click [WAN] tap. Click “PPP” in upward row of this page, and you can
find [ A d d ] button in next page.
23
A D S L Modem Manual
1-2. modifying in [ P P P I n t e r f a c e - A d d ] .page
l ATM VC : aal5-1(setting value in ATM VC Provided by ISP)
l Protocol : Choice PPPoA or PPPoE
l [ U s e D h c p & U s e D N S ] setting [ E n a b l e ] condition.
l Insert in the ID & Password from Provided ISP, and Click [Submit]
button.
l You be sure that save you did in [ C o m m i t & R e b o o t ] .
24
A D S L Modem Manual
1-3. You do such like “1-2”, you can see fixed page such like below.
1-4. When Oper. Status Linked Up, you can use internet program freely.
25

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:09:16 10:52:44+02:00
Create Date                     : 2002:09:16 10:51:49+02:00
Title                           : Manual_VisionNet708_.PDF
Author                          : moon
Creator                         : Microsoft Word
Producer                        : Acrobat PDFWriter 4.0 for Windows
Page Count                      : 25
Mod Date                        : 2002:09:16 10:52:44+02:00
Creation Date                   : 2002:09:16 10:51:49+02:00
Metadata Date                   : 2002:09:16 10:52:44+02:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QMP708

Navigation menu