DREAMUS IDP100 Data Play User Manual cover

IRIVER LIMITED Data Play cover

users manual

User Manual
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICES MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDERSIRED OPERATION.
Note : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
앞󰚟면Front
Keys󰚟&󰚟Controls
NAVI/
FUNCTION
앞 면Back
VOLUME
1
3
Please󰚟connect󰚟the󰚟remote󰚟control.
Put󰚟the󰚟Disc󰚟into󰚟Player.
Playing󰚟Disc󰚟Media
2
Hold
Power󰚟On
Power󰚟Off
Put󰚟the󰚟switch󰚟power󰚟on.
Selecting folder and move
to upper folder
Playing
Navigation is the function that allows you to navigate through
the files in the CD.
1
2
3
Pressing NAVI/FUNCTION button shows you the list of songs and
current song playing.
Track01
Track02
Folder󰚟A
Track01
Track02
Folder󰚟A
NAVIGATION
Use NAVI/FUNCTION button to find
the song you'd like to listen to.
Use button to exit to the
upper folder.
The next figure shows the status
when you move to upper folder.
To move the cursor, use the
NAVI/FUNCTION button and to
enter the Chosen Folder, 
click the NAVI/FUNCTION button.
Music
Folder󰚟A
Folder󰚟B
PREV NEXT
PREV NEXT
To move to the
Upper folder.
NAVI/FUNCTION button
To enter the folder
MP
3
L
R
Folder󰚟A
Track01
44
KHZ
128
KBPS
The song will be played when you press the NAVI/FUNCTION button.
FUNCTION
The Main Menu
How to use Menu
▼󰚟Main Menu
general
mode
display
control
User EQ
timer
GENERAL
VER󰚟1.00
▼󰚟Sub Menu
GENERAL
beep
resume
fade in
language
load default
firmware upgrade
CONTROL
fast scan
fast skip
scan speed
scroll speed
remote mode button
auto pause
adapter volume
sound balance
MODE
repeat
shuffle
intro
study
name
User EQ
bass boost
bass corner freq
treble boost
treble corner freq
DISPLAY
back light
main lcd contrast
remote lcd contrast
tag information
visualization
time
TIMER
sleep
pwr off
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
BEEP SOUND VOLUME
0 1 2
34
+
+
+
+
GENERAL
beep vol
resume
fade in
language
FUNCTION(GENERAL)
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
GENERAL
BEEP VOL
: Configure beep sound (ON/OFF) with
volume level.
RESUME
: When activated, player resumes playing at the
same spot played last after Power OFF.
LANGUGE
: Song title and ID3 tag information from the CD is
dependent on the PC operation system that it is
made into.
(For example, when the CD is burnt from Japanese
Windows, the language setting should be Japanese)
LOAD DEFAULT VALUE
: Initialize to original factory setting.
SOUND FADE IN
: When activated, volume steadily increases when
you begin playing. It can prevent sudden loudness
when you play the song after stopping.
Button operation is as below
(Select Default Menu) → (move to YES)
→ (Select YES : INITIALIZATION)
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
LOAD DEFAULT
ARE YOU SURE?
YES NO
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
BEEP VOLUME
0 1 2
34
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
RESUME
OFF ON
+
+
+
+
GENERAL
F.scan
F.skip
speed
scroll
SOUND FADE IN
OFF ON
+
+
+
+
F.scan
F.skip
speed
scroll
Korean
English
GENERAL
FUNCTION(DISPLAY)
DISPLAY
LCD CONTRAST
: Adjust LCD contrast of remote control.
Using , buttons can adjust LCD contrast.
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
LCD CONTRAST
32
While playing, long pressing the play( ) button will turn on the Backlight as you
have it set.
BACK LIGHT
OFF : Backlight is always off.
BUTTON ON works as below :
1 : about 3~10 seconds 2 : 10 seconds 3 : 20 seconds
ADAPTER ON :
1 : about 3~10 seconds 2 : 10 seconds 3 : 20 seconds
4 : Always
OFF
ADAPTER ON
BACK - LIGHT
BUTTON ON
1 2
1 2 4
3
3
VISUALIZATION
: Visualizes audio signal at play mode.
You can choose between Level Meter and
WaveForm.
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
VISUALIZATION
WAVEFORM
LEVEL METER
LEVEL METER▶
WAVEFORM▶
FUNCTION(TIMER󰚟and󰚟CONTROL)
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
+
+
+
+
TIMER
F.scan
F.skip
speed
scroll
+
+
+
+
TIMER
F.scan
F.skip
speed
scroll
SLEEP󰚟POWER󰚟OFF
:󰚟설정된󰚟시간이󰚟지나면󰚟전원이󰚟자동으로󰚟꺼집니다.
󰚟󰚟(OFF󰚟또는󰚟1󰛽99분까지󰚟1분단위로󰚟설정이󰚟가능
󰚟󰚟합니다.)
STOP󰚟POWER󰚟OFF
:󰚟정지상태시의󰚟전원차단󰚟시간󰚟조절이󰚟가능합니다.
󰚟󰚟(`1󰛽60분으로󰚟설정가능합니다.)
버튼을󰚟이용하여와시간을󰚟조절합니다.
▷제품의󰚟전원이󰚟꺼지면󰚟OFF로󰚟자동󰚟설정됩니다.
버튼을󰚟이용하여와 시간을󰚟조절합니다.󰚟
STOP POWER OFF
1
SLEEP POWER OFF
0
OFF
MIN
TAG󰚟INFORMATION
:󰚟설정(on)한󰚟후󰚟tag󰚟정보가󰚟있는󰚟곡을󰚟재생하면
󰚟󰚟제목을󰚟tag정보로󰚟바꿉니다.
󰚟󰚟해제(off)하면󰚟filename으로만󰚟표시됩니다.
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
재생중󰚟tag정보를󰚟해제했을때는󰚟재생되고󰚟있는󰚟곡과
다음에󰚟연주될󰚟곡은󰚟tag정보로󰚟보일수󰚟있습니다.
OFF ON
TAG INFORMATION
TIME
:󰚟NORMAL으로󰚟설정하면󰚟곡의󰚟재생된󰚟시간이󰚟
󰚟󰚟표시됩니다.
󰚟󰚟REMAIN으로󰚟설정하면󰚟곡의󰚟재생󰚟되어야󰚟할
󰚟󰚟남은󰚟시간이󰚟표시됩니다.
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
단󰚟VBR󰚟곡인󰚟경우󰚟남은󰚟시간󰚟표시가󰚟정확히󰚟되지
않습니다.
REMAIN
PLAY TIME INFO
NORMAL
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
+
+
+
+
TIMER
F.scan
F.skip
speed
scroll
+
+
+
+
TIMER
F.scan
F.skip
speed
scroll
TIMER (Auto Power Off time setting)
SLEEP POWER OFF
: The power goes off automatically after fixed time.
Time range can be set from 0~99 by minutes.
STOP POWER OFF
: The automatic power off can be made when the
player is in STOP mode. Time range can be made
from 1~60 minutes.
and button can be used for time setting.
STOP POWER OFF
1
SLEEP POWER OFF
0
OFF
MIN
TAG INFORMATION
: When ON, tag information is displayed and when
OFF, only the file name is displayed
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
Setting the tag information to OFF while playing may
show the track is playing and the NEXT track with tag
information.
OFF ON
TAG INFORMATION
TIME
: Normal displays elapsed time.
Remain displays remaining time.
+
+
+
+
DISPLAY
F.scan
F.skip
speed
scroll
With VBR file, the time may not be accurate.
REMAIN
PLAY TIME INFO
NORMAL
and button can be used for time setting.
When the power goes off, it goes back to Zero setting.
FUNCTION(MODE)
CONTROL
ADAPTER VOLUME
ON: When the Adaptor is connected, the volume
always remains at level 35.
OFF: No use of Adaptor volume.
+
+
+
+
CONTROL
F.scan
F.skip
speed
scroll
ADAPTOR VOLUME
OFF 35 ON
SOUND BALANCE
When the lever on the Sound Balance bar is
moved to L (Left, 0),the sound output will be in the
left earphone. When the lever on the Sound
Balance bar is moved to R (Right, 40) the sound
output will be in the right earphone. The default
value is 20 and the sound output will be in the
center.
+
+
+
+
CONTROL
F.scan
F.skip
speed
scroll
LR BALANCE
center(20)
L C R
20
AUTO PAUSE
When Auto Pause is ON, you will need to press
Play after the disc loads. Auto Pause also
pauses the disc after each song and you will
need to press Play to resume playing.
+
+
+
+
CONTROL
F.scan
F.skip
speed
scroll
AUTO PAUSE
OFF ON
FUNCTION
MODE
REPEAT MODE / SHUFFLE MODE
: The setting value changes when you press the MODE button.
▷ Only the selected play mode will be applied when you press the MODE button.
(For details, please refer to Page. 12 )
+
+
+
+
MODE
F.scan
F.skip
speed
scroll
REPEAT MODE
1 DIR
DIR ALL ALL
+
+
+
+
MODE
F.scan
F.skip
speed
scroll
SHUFFLE MODE
DIR
ALL
1
SHUFFLE
DIR ALL
INTRO MODE
:INTRO MODE plays the first 10 seconds of each
track.
INTRO HIGHLIGHT plays the first 10 seconds
from the spot 1 minute was played for each
track in sequential order. For example, song A
plays 10 seconds from 1 minute into the song,
so the highlight ends at 1minute 10 seconds.
Then song B plays 10 seconds from 1 minute
into the song, so the highlight ends at 1minute
10 seconds, and so forth with each track.
+
+
+
+
MODE
F.scan
F.skip
speed
scroll
INTRO MODE
OFF
HIGHLIGHT ON
ON
STUDY MODE (LANGUAGE STUDY)
:
5 SEC / 10 SEC: When you press STOP, it goes
back 5 or 10 seconds.
It will work as INTERVAL REPEAT when you
press the MODE button on the remote.
BEEP: When BEEP is ON, it lets you know the
button operation with beep sound.
+
+
+
+
MODE
F.scan
F.skip
speed
scroll
STUDY
OFF 5 SEC
BEEP
10 SEC
8F󰚟Posgen󰚟VentureTower,󰚟1586-7󰚟Seocho-dong,
Seocho-gu,󰚟Seoul,󰚟Korea󰚟󰚟Zip󰚟;󰚟137-070
Tel󰚟:󰚟+82󰚟080󰚟3486󰚟3838󰚟/󰚟Fax󰚟:󰚟+82󰚟2󰚟3019󰚟1888
EXTERNAL DC POWER SUPPLY : 5V
BATTERY SUPPLY :
Li-Ion RECHARGEABLE BATTERY
PORTABLE DATAPLAY MEDIA PLAYER
Model No. : iDP-100
Manufactured by iRiver
Assembled in China
SERIAL NO.

Navigation menu