Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 407613 |
| Application ID | qL2A61g4IQHr2xTP+sU9bg== |
| Document Description | Users Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 98.2kB (1227479 bits) |
| Date Submitted | 2004-03-23 00:00:00 |
| Date Available | 2004-03-23 00:00:00 |
| Creation Date | 2004-03-20 11:59:32 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2004-03-20 12:00:03 |
| Document Title | Users Manual 1 |
Hardware Instruction Manual Digital Audio player/ Recorder/FM Tuner Model iFP-700 Series iFP-700 Series Thank you for your purchase. Please read this manual carefully before using your new player. www.iRiver.com www.iRiver.com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Contents GETTING STARTED LOCATING THE CONTROLS PC SOFTWARE INSTALLATION BASIC OPERATION CONVENIENT FUNCTIONS ADDITIONAL INFORMATION NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL. GETTING STARTED CONTENTS 1-1 FEATURES 1-2 ABOUT POWER SUPPLY 1-3 NOTE Getting started... INTERNET THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL. INTERNET FEATURES URL : www.iRiver.com Update your player with firmware downloads. Firmware upgrades offer support for new CODECS and deliver new product features. Consult the product FAQ. Register your iRiver product online so that our Customer Service is able to provide support as efficiently as possible. All contents contained in this manual subject to change without notice to improve ability of this player or according to changing of specification. iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and /or other countries and is used under license. Microsoft Windows Media and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated. Getting started... Getting started... Find information on our company, products, and customer and technical support. Multi-Codec Player Supports MP3, WMA, OGG and ASF formats. Firmware Upgrade Provides the latest updated features via firmware upgrade. Graphic LCD supporting Multiple Languages iFP-700 Series comes with graphic LCD which can support multiple languages (40 languages). FM Function You can easily listen to FM stations and set your favorite stations by using Auto Preset and Frequency Memory functions. 6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal Xtreme EQ and Xtreme 3D Customize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D. GUI (Graphic User Interface) Menu System Simple Navigation Simple navigation makes it easy to find any song. Supports 8 levels of subfolders, 500 folders total and up to 1500 files at one time. Create your own playlists. Direct MP3 Encoding 11.025KHz ~44.1KHz, 8Kbps ~ 320Kbps Record FM Radio, Voice, or line-in from another device Voice record level is automatically controlled by AGC function. Convenient neck strap. Supports USB 2.0 (iFP-780 Supports USB 1.1 only) 1999-2004 iRiver Limited. All rights reserved. 1-1 1-2 ABOUT POWER SUPPLY Locating the Controls Inserting a battery Insert the battery. (AA 1.5V type x 1ea) Be sure to match the + and ends of the battery with the diagram inside the battery compartment. Front View 2-1 Side View 2-2 LCD Screen 2-3 Locating the Controls Getting started... Open the battery cover. Contents Close the battery cover. NOTE If the battery is worn out, “Low Battery” is displayed on the LCD. Insert a fresh battery. 1-3 To avoid corrosion, remove the battery if the player is not to be used for a long time. Remove dead battery immediately to avoid damage from corrosion. When corrosion occurs, wipe the battery compartment immediately with a dry cloth and insert a new battery. NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL. Locating the Controls Locating the Controls Front View Side View I (Next Track/Fast Forward) LCD Screen Volume + USB Connection Port NAVI/MENU STEREO Power ON/OFF / (Play/Stop) MODE/REC MEMORY/EQ A-B (Interval repeat) Locating the Controls Locating the Controls MIC HOLD Volume I (Previous Track/Fast Reverse) Earphones Battery 2-1 2-2 Locating the Controls PC software installation LCD Screen Contents SONG NUMBER PLAY TIME PLAYBACK MODE HOLD Locating the Controls PC software installation 3-1 BATTERY INDICATOR FOLDER NAME Attach the player 3-4 ARTIST/TITLE NAME PROGRAM Detach the player 3-7 VOLUME BIT RATE EQUALIZER SAMPLE RATE VISUALIZATION NOTE THIS SECTION COVERS THE INSTALLATION FOR WINDOWS OPERATING SYSTEMS ONLY. FOR INSTALLATION INSTRUCTIONS FOR MAC OS, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL. NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL. FILE FORMAT ASF WMA OGG MP3 IRM (iRiver Rights Management) iRiver Rights Management is a digital music format. Please visit our web site for details about this music format. 2-3 IRM PC software installation PC software installation Software installation Software installation IMPORTANT Please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC. " Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD. PC software installation The player can store MP3 files or files of any type. You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver Music Manager Program. " Download latest versions of drivers and iRiver Music Manager at www.iRiver.com " Please be sure your login has Administrator privileges if using Windows 2000 or Windows XP. Note updates. Please note that the installation screens may differ slightly from those appearing here, as software may be of a more recent version. If your screens differ, please visit www.iRiver.com/software for an updated user guide. the Installation CD into the CD-ROM “Next” after selecting the language to 1 Insert 2 Click drive. Installation starts automatically. install. “Next” to Install iRiver Music 3 Click Manager. the folder to Install. 4 Select Click “Next”. PC software installation If the installation doesn't automatically begin, execute the "setup.exe" file in the installation CD. The installation program will begin. " The installation CD contains the following contents : - Device Driver - iRiver Music Manager - MoodLogic - Manager Program for Mac Note During this installation, the software will check online for the most recent System Requirements (Windows) Pentium 133MHz or faster USB port " Window 98SE / ME / 2000 / XP 3-1 CD-ROM drive 10MB free hard disk space 3-2 PC software installation Attach the player Software installation “Next” after confirming the 5 Click installation folder. Connecting to the PC 6 Click “Install” to begin the installation. 1 Connect the USB cable (provided) to the USB port of your computer. Type “A” Type “A” USB cable USB port on the PC Installation is in progressing. Click “Finish” after the installation is completed. on the player by pressing the button 2 Turn marked STEREO. Lift the protective cover 3 Type “B” “USB CONNECTED” will appear on the LCD screen of the player. over the USB port and connect the USB cable to the player. Note 3-3 USB port on the player PC software installation PC software installation Type “B” Connect the USB cable to the PC after playback stops to avoid errors. iFP-780 supports USB 1.1 and iFP-790/ 795/ 799 supports USB 2.0 version. 3-4 Attach the player Attach the player Installation of New Hardware Installation of New Hardware computer will automatically search to installing iRiver Music Manager from 1 After 2 The find your new hardware. the CD and connecting the player to your PC, "Found New Hardware" screen is displayed. a "Hardware Installation" warning 4 Ifmessage appears, click "Continue Anyway". (Windows XP) The iRiver software driver will not cause any damage to your computer. “Finish” 6 Click Completed the installation of “New hardware”. screen is displayed on the PC. New hardware is installed successfully 7 Information and ready to use. PC software installation PC software installation 3-5 “Install the software automatically 3 Select (Recommended)” and click “Next”. 5 The installation will continue. 3-6 Detach the player Basic Operation Safely Removing the player from the PC the “Safely Remove hardware” 1 Select after clicking the “Safe To Remove Contents Click the “Stop” after selecting the device to remove. Hardware” by using the right button of mouse. the “Close” after confirming the 4 Click Safely Remove Hardware message. 4-1 Basic Operation 4-3 Operating the FM Tuner 4-7 Basic Operation PC software installation the “OK” after confirming the 3 Click hardware to remove. Listening to Music (In case of Windows XP) Recording 4-11 If the player is disconnected inacculately, it may cause a malfunction or damages to the player. 3-7 Listening to Music Listening to Music LISTENING TO MUSIC Connect the earphones as shown below. Put the HOLD switch to “OFF”. To turn on the player Click To play the next folder Pus To play Press the PLAY/STOP button to turn on the player. Press it again to play. Click To change modes (MP3 Voice recording FM LINE IN) To play the previous folder Pus ush Long P Basic Operation Basic Operation Click lick Long C To stop To fast forward Click ush Long P To adjust the volume + : To increase volume - : To decrease volume 4-1 To select song To select previous song To select next song ush Long P NOTE - When "Hold" is ON, the buttons on the player will not function. - When stopped or in recording standby mode, the player automatically turns off according to the setting of “STOP POWER OFF” on the MENU.(Refer to page 4-17) To advance Pus To fast reverse ush Long P To reverse Pus To turn off the player lick Long C 4-2 Basic Operation Basic Operation Basic Operation Changing Functions Press and hold the MODE button to display the current function. Push the I to select the desired function, then click the NAVI/MENU button toward I or NAVI/MENU button to enter that mode. lick Long C 1. LCD window : Displays the operating status of the player. Navigation MP3 FM FM RADIO VOICE MP3 Playback Xtrm EQ Menu FM Receiving Voice Recording Selecting FM Tuner Mode Press the STEREO button to select STEREO or MONO. Click Click FM FM RADIO LINE IN lick Long C VOICE LINE IN LINE IN Recording adjusting the volume Press + on volume button to increase volume and press – on Volume button to decrease volume. to increase Basic Operation Basic Operation 2. To skip to previous track or previous FM station. 3. To increase volume. 4. To skip forward to the next song or FM station. 5. To select NAVI/MENU function. 6. To decrease volume. 7. To Play or Stop playback, to select FM mode, or to turn on/ off. 8. To select EQ mode, A-B repeat, or automatically store FM stations. EQ : NORMAL ROCK JAZZ CLASSIC U BASS METAL Xtrm 3D 9. To select function, playback mode, or record/stop recording. Pus (Refer to page 4-8) to decrease 4-3 4-4 Basic Operation Basic Operation NAVIGATION DELETING FILES ON THE PLAYER Press NAVI/MENU button and find the desired track by pushing the VOL + or VOL – button. button. To select the track, press the NAVI/MENU button, I or the 1 Stop playback. During MP3 playback, you can select the playback mode by turns by clicking the MODE/REC button. Click Repeat Playback the “MODE” button. 4 Click “FILE DELETE ARE YOU SURE?” is displayed on the screen. Select “YES” by using I or I (VOL + or VOL -) to delete. Then click NAVI/MENU button. Press and hold the MODE/REC button : You can select MP3 or FM, Voice or Line-in recording functions. (Play mode is automatically activated when MP3 is selected). FILE DELETE DELETING FOLDERS ON THE PLAYER 1 Stop playback. Select the folder to delete. the 2 Press “NAVI/MENU” button. 3 Basic Operation Basic Operation Shuffle Playback Intro Playback the file to delete by 3 Select using VOL or VOL . button. To move to the upper folder, push the I switch. If there is no upper folder, NAVIGATION stops. MODE the 2 Press “NAVI/MENU” MENU A long press of the NAVI/MENU button will enter the menu system. Scroll between menus : Push I or I (VOL + or VOL -). Exit : Click the PLAY/STOP button (or long pressing of NAVI/MENU button). Select Function: Press the NAVI/MENU button. 4-5 the “MODE” button. 4 Click “FOLDER DELETE ARE YOU SURE?” is displayed on FOLDER DELETE the screen. Select “YES” by using I and I (VOL + or VOL -) to delete. Then press NAVI/MENU button. NOTE You can only delete an empty folder. 4-6 Operating the FM Tuner Operating the FM Tuner OPERATING THE FM TUNER To select STEREO/MONO switch to the FM Tuner, press and hold the MODE/REC button. 1 To The current function is displayed. Press the STEREO/PLAY/STOP button to select Stereo/Mono. lick Long C Click MP3 The function selection graphic displays on the LCD. the I 2 Push confirm. VOICE LINE IN Auto Scan function I switch to select FM RADIO. Press the NAVI/MENU button to Click MP3 Pus or or FM FM RADIO To automatically locate a station press and hold NAVI/MENU button to the right or left. The player will quickly scan through each frequency and stop at the next station that can tuned in. or VOICE ush Long P LINE IN PRESET Mode I to select your desired station. (Ex : 87.5 87.6) Basic Operation Basic Operation Pus 3 Push the NAVI/MENU switch toward I 4-7 FM FM RADIO To select a station saved in memory, press the NAVI/MENU button to enter PRESET or switch to the left or the right. mode then find a saved station by pushing the (Ex : 89.1 91.9 93.1) 4-8 Operating the FM Tuner Operating the FM Tuner Memory delete function (Delete saved stations) Memory Function (Save stations) 1 Select a station by pushing the Click Push or and select the desired station. Select CH02 Click Save complete Click To cancel Saving will exit the memory function without saving. Auto memory function Press and hold the A/B MEMORY button to automatically select select stations and save them in sequential order. (Only activates while the player is not in PRESET mode) - The next station will appear when station delete is completed. Push the MEMORY button if you also want to delete the next station. NOTE FM Tuner reception may vary in different areas. While in PRESET mode, auto scan and auto memory functions are not available. When the player doesn’t have any preset stations, EMPTY will be displayed at PRESET mode then faded out. Basic Operation Basic Operation hold the MEMORY lick Long C again Up to 20 stations can be saved. the station to be deleted at and 1 Select 2 Press PRESET mode button. switch to the left or the right. or To turn the player off lick Long C Press and hold the PLAY/STOP button to turn the player off. lick Long C Auto memory may not work within weak transmission areas. 4-9 4-10 Recording-FM Tuner Recording-Voice To record FM Press the MODE/REC button during FM reception. The station will be recorded, the remaining recording time will be displayed on the LCD screen. Recording Voice To pause FM recording Click Press PLAY/STOP button to pause the recording process. Press PLAY/STOP button again to restart recording. 1 Press and hold the MODE/REC button. the or (VOL + or VOL 2 Press ) switch to select Voice mode. lick Long C Pus Click Press the MODE/REC button again to stop recording. The recorded file is saved as TUNER000.REC. It is saved in the RECORD folder. FM FM RADIO VOICE LINE IN the NAVI/MENU button (or 3 Press PLAY/STOP) to go to Voice recording mode. (The recorder will be in standby mode.) Click Click MP3 FM FM RADIO VOICE LINE IN the MODE/REC button again to 4 Press begin recording. Click Basic Operation Basic Operation To stop FM recording MP3 or To play a recorded file After selecting MP3 mode, select the recorded file to listen and press the PLAY/STOP button to play. NOTE 4-11 Volume can not be controlled while recording. Recorded REC files can be converted to MP3 files using iRiver Manager. (Refer to page iRiver Music Manager Software Instruction Manual 32~34/37~39) MONO 32KHz 32KBPS 4-12 Recording-Voice To stop recording Press the MODE/REC button. Recording-External audio source Recording from an external audio source To play a recorded file Press the PLAY/STOP button. Click 1 Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player. Click To pause voice recording MONO 32KHz 32KBPS Press Press button during recording. button again to restart recording. NOTE Pausing the recording will not create a new file, recording will be added to the current recording. NOTE The recorded file is saved as VOICE000.REC in the VOICE folder. If “00:00:00” is displayed on the LCD, the player’s memory is full. To record, delete files and/or folders on the player to make some space available. (To delete : Refer to page 4-6, iRiver Music Manager) “LINE IN RECORDING MODE” in 2 Set the MENU.(Refer to page 5-22 for details) lick Long C LINEIN RECORDING MODE MONO STEREO 44.1KHz 128KBPS The player can not record when the memory is full or the battery is low. 4-13 3 Press and hold the MODE/REC button. Basic Operation Basic Operation NOTE After stopping a recording, starting again will create a new voice file. MP3 FM FM RADIO Keep the player far away enough from the source to avoid distortion in the recording. NOTE Recorded REC files can be converted to MP3 files using iRiver Manager. (Refer to page iRiver Music Manager Software Instruction Manual 4-32~4-34) - Select Line-In mode on the menu to use the external microphone. VOICE LINE IN 4-14 Recording-external audio source Recording-external audio source Recording from an external audio source To stop recording the I or I (VOL + or VOL -) the NAVI/MENU button (or 4 Press 5 Press switch to select the LINE-IN mode. PLAY/STOP) to go to LINE-IN recording mode. (Record Standby Mode) Pus 1 Press the MODE/REC button. To play a recorded file [ 1] 1 Press the PLAY/STOP button. Click Click Click Click or STEREO 44.1KHz 128KBPS VOICE LINE IN the MODE/REC button and 6 Press LINE-IN recording is started. Click AUDIO001 4-15 STEREO 44.1KHz 128KBPS Press play on your external equipment (if necessary) to begin playback to be recorded. NOTE - The recorded file is saved as AUDIO000.REC, AUDIO001.REC... in sequential order. Files are saved in the RECORD folder. - Select Ext. Mic on the CONTROL linein/ext. mic menu to use the external microphone. (Refer to page 4-23) - Files recorded using an external microphone are saved as EXMIC000.REC. To play a recorded file [ 2] Press the PLAY/STOP button. pressing the NAVI/MENU button, 1 After select a recorded file using the VOL + 2 or VOL - switch. Click Click Basic Operation Basic Operation MP3 FM FM RADIO 4-16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:03:20 12:00:03+09:00 Create Date : 2004:03:20 11:59:32+09:00 Producer : Acrobat Distiller 4.0 for Macintosh Page Count : 20 Mod Date : 2004:03:20 12:00:03+09:00 Creation Date : 2004:03:20 11:59:32+09:00 Metadata Date : 2004:03:20 12:00:03+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools