DREAMUS PMP140 PORTABLE MULTIMEDIA PLAYER User Manual USERS MANUAL 6

Download:
Mirror Download [FCC.gov]
Document ID	441627
Application ID	98CGAaBWZwzftkZPdEGaTg==
Document Description	USERS MANUAL 6
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.82kB (960274 bits)
Date Submitted	2004-06-17 00:00:00
Date Available	2004-06-17 00:00:00
Creation Date	2004-06-17 17:58:12
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2004-06-17 17:58:26
Document Title	USERS MANUAL 6

4-5. Customizing the function settings
4-5. Customizing the function settings
Specific features
Specific features
7. System
6. Clock
1 USB Device
1 Clock
Hour/Minute
Displays the current clock.
Day/Month/Year
Displays the current day.
Setup
Set the time and day.
Press the SELECT button after selecting Set .
22
22
Clock
Hour
Minute
30
Day
Year
22
30
Minute
Year
Firmware Upgrade
PMP-100 Ver. 1.00K
Hard Disk Total 19059 MB
Free 5718 MB
2004
02:02
Minute
2004
Setup
[Clock]
02:02
2 Firmware Upgrade
30
22
Time is changed. 1
Month
Upgrade the operating system of PMP-100.
Year
Refer to “4-6 Firmware Upgrade” for details.
Day
2004
USB Device
Firmware Upgrade
PMP-100 Ver. 1.00K
Hard Disk Total 19059 MB
Free 5718 MB
Setup
Setup
02:02
System
Set
Set
02:02
USB Device
Setup
22
System
Set
Clock
Hour
Month
Displays the device connected to the PMP-100
through the USB Host connection.
Month
Clock
Hour
Day
02:02
Setup
22
02:02
22
System
System
USB Device
[F/W Upgrade]
Firmware Upgrade
Unpacking
PMP-100
1.00K file.
theVer.
Upgrade
Hard Disk Total 19059 MB
Free 5718 MB
USB Device
[F/W Upgrade]
Firmware Upgrade
Upgrade to x.xx
PMP-100
AreVer.
you1.00K
sure ?
Hard Disk Total 19059 MB
Yes
No
Free 5718 MB
Setup
02:02
Setup
What is FIRMWARE?
It is the operating system that works in the PMP-100.
iRiver provides you with the latest and best features through Firmware
Upgrade. Visit www.iRiver.com to upgrade your Firmware.
97
98
4-5. Customizing the function settings
4-5. Customizing the function settings
Specific features
8. Recording
Specific features
8. Recording
1 Source
4 Line In Volume
Select the source to record.
You can select the source to record (External
microphone, Internal microphone, Line In).
22
02:02
Record
Source
INT-MIC
Samplerate
Bitrate
32KHz
INT-MIC
Samplerate
32KHz
128Kbps
Line In Volume
15
File
mp3
15
mp3
Setup
2 Samplerate
02:02
22
Record
Source
Bitrate
128Kbps
Line In Volume
File
You can adjust recording level when recording
from External equipment.
(You can set from 0 to 31.)
Setup
5 File
You can adjust recording quality by setting
Samplerate (Sampling ratio).
You can select 32KHz or 128KHz.
The higher Samplerate is, the better the
recorded sound is and the lower it is, the worse
the recorded sound is. Higher quality recordings
will create larger files and take up more space on
the player.
22
Record
Source
File
Record
Source
32KHz
Bitrate
15
File
Setup
99
22
Record
Source
Bitrate
32KHz
128Kbps
Line In Volume
File
02:02
INT-MIC
Samplerate
15
mp3
Setup
3 Bitrate
You can adjust recording quality by setting
Bitrate (Compression ratio).
You can select the Bitrate to 96 Kbps or 128
Kbps.
The higher Bitrate is, the better the recorded
sound is and the lower it is, the worse the
recorded sound is. Higher quality recordings will
create larger files and take up more space on the
player.
32KHz
128Kbps
Line In Volume
mp3
02:02
INT-MIC
Samplerate
128Kbps
Line In Volume
22
Select the file type to save file recorded.
INT-MIC
Samplerate
Bitrate
02:02
15
mp3
Setup
100
4-6 Firmware upgradable
Specific features
4-6 Firmware upgradable
Specific features
It is the operating system that works in the PMP-100.
iRiver provides you with the latest and best features through Firmware Upgrade.
Visit www.iRiver.com to upgrade your Firmware.
Firmware Upgrade
Firmware Upgrade
1 Preparing the Firmware Upgrade
2 Activating the Firmware Upgrade
Download the latest firmware
upgrade file (PMP-100-Vxxx.zip)
from www.iRiver.com.
Unzip the downloaded firmware file
and double click the EXE file.
This will create the firmware file.
(PMP-100.tar)
After connecting the player to the
USB, copy “PMP-100.tar” file to the
“Root” folder on the player.
Always use the AC adapter for
Firmware upgrade. If not, critical
damage to the player may result
from to battery shortage.
long
Press the SELECT button after
selecting Setup by using
button.
Press the SELECT or
button
after selecting System by using
button.
Press the SELECT or
button
after selecting Firmware
Upgrade by using
button.
Automatically unzip the Firmware
Upgrade file (PMP-100.tar)
22
22
02:02
02:02
System
USB Device
Firmware Upgrade
PMP-100 Ver. 1.00K
Hard Disk Total 19059 MB
Free 5718 MB
Setup
22
02:02
System
USB Device
[F/W Upgrade]
Firmware Upgrade
Unpacking
PMP-100
1.00K file.
theVer.
Upgrade
Hard Disk Total 19059 MB
Free 5718 MB
Safely remove the player from the
PC .
101
Setup
102
4-6 Firmware upgradable
4-7. Precautions
Specific features
Specific features
Solving the problem about the Boot Failure
Firmware Upgrade
1 Precautions for Hard Disk Drive
Press the SELECT button after
selecting Yes by using
button.
The firmware upgrade is in processing.
22
02:02
The player can not be formatted using the Disc Management Utility or
the Format Commander Utility in Windows 2000 and Windows XP since
32GB is the maximum HDD size enabling to be formatted.
Because this is not supported at Windows O.S. and the player is not
malfunction. You can still use a HDD which is formatted as FAT 32
system on Windows 98 SE or ME.
The player can be formatted using Windows Explorer in Windows 98 SE
and Me.
The player can be formatted using the HDD Management Utility in
Windows 2000 and XP.
If the player is disconnected suddenly or turned off during file transfer, it
may case data loss and an error screen may display on the player. If this
happens, attach the player to your PC and run the Windows Scan Disk
utility.
System
USB Device
[F/W Upgrade]
Firmware Upgrade
Upgrade to x.xx
PMP-100
AreVer.
you1.00K
sure ?
Hard Disk Total 19059 MB
Yes
No
Free 5718 MB
Setup
Press the SELECT button after
selecting No by using
button to cancel the Firmware
Upgrade.
Please be careful while the player is
connected to a PC with the USB cable
for firmware upgrade.
If the PC power is turned off or the USB
cable is disconnected while firmware is
being upgraded, a HDD error in the
player may be generated.
22
02:02
System
USB Device
[F/W Upgrade]
Firmware Upgrade
Unpacking
PMP-100
1.00K file.
theVer.
Upgrade
Hard Disk Total 19059 MB
Free 5718 MB
Setup
When the upgrade is done, turn
the player off.
After turning the player on,
confirm the Firmware Upgraded
operating.
103
bout the Boot Failure
When turns the player on, in case the system file of the player do not
agree with the Firmware version of the player or there is any trouble
in the FAT32 file system, Boot Failure will be displayed because
the player do not recognize the HDD.
104
4-7. Precautions
Specific features
Solving the problem about the Boot Failure
2 Solving the problem about the Boot Failure
Connect the player to the PC and check and recover the error by
running the Windows Scan Disk utility.
Check the Firmware version of the player when turns on.
Download the system file (PMP-100kor-Vxxx-Sysfile.zip) of the same
version from www.iriver.com. Extract the file and save it to the ROOT
folder of the player.
Disconnect the player from the PC securely.
Check it after the player turns off and on.
Boot Failure will be displayed continuously at the player turn
on, please use the HDD format program in the Windows
operating system or HDD Management Utility to format the
player’s HDD.
Repeat step 2~3 to check your player again.
Please
accurately.
Boot Failure” although you confirm
105
Additional
Information
4-7. Precautions
NOTE !
During playback, dirty or scratched CD's may cause audio distortion or
skipping.
If the file is unable to play due to damage, the damaged part will skip;
if it is not possible to play continuously it will skip to the next song.
Folders and files are sorted in alphabetical order.
Only regular music file extension with MP3, WMA, WAV, ASF, OGG, AVI,
BMP, and JPG can be played.
The player can recognize the files/folders on the player without limit but
999 files or sub folders in a folder.
Battery level indicator may vary depending on battery type
(Internal/External) and operation mode.
During audio playback, either the file name or the ID3 information will be
displayed.
When external battery is mounted, maximum play time for video
(video-DivX640X480@30fps audio-MP3 128kps, 44.1KHz) is
?? hours and maximum, Audio-MP3(128kps, 44.1KHz) reproduction
time for audio is ?? hours. (Reference : Volume Center, TFT LCD Display :
OFF)
Audio of moving picture only supports MP3, WMA.
AC3, DTS, AAC, and other formats are not supported.
Physical shock can cause bad sectors on the Hard Disk inside the player.
This can be recovered using Windows Scandisk.
All data stored on this device may be erased by a excessive impact, a
thunder or an electricity failure, etc. on the device.
The Manufacturer does not warrant and will not be held responsible in any
way for damages or loss of data, including loss of data stored on this
device, resulting from a excessive impact, a thunder or an electricity
failure. You will be responsible for safe-guarding all data stored on this
device.
106
Additional
Information
5-1. Questions and Answers
Additional
Information
5-2. Troubleshooting!
Should any problem continue after you have checked these symptoms,
please contact iRiver customer support.
Solution
Trouble
Playing
Player will not
power on.
Can I change the playing order?
The PMP-100 supports m3u file lists. Also, the Program function allows
you to select your preferred songs.
For ASF file format, there are audio file type and motion picture file type.
iRiver supports both format, however, in the case of motion pictures, it
is possible to only hear sound or not being to play, all depending on the
video file format.
AC adapter does
not work.
Remote control
does not work.
I hear a 'hiccup' sound while the song is playing.
Check the status of the file. What is likely happening is that the file is
corrupted, especially if you hear the same sound in the same spot. In
this case, it is recommended you to record the file again or download a
different file.
The clock is
changed to
00:00.
The lyric is not
displayed.
What is VBR?
VBR is "Variable Bit Rate". Some MP3 encoders support VBR. When
enabled, the compressor will use a bit rate that will fit the actual
passage. If it is a complex part, having much more variation in the
sound, it will use a high bit rate. If there is less variation in sound, it will
use a lower bit rate. Usually, the average bit rate will not be as high as a
same-quality MP3 with CBR (Constant Bit Rate). However, there is
shortcoming that it's hard to keep track of the actual position that may
not be favorable when studying language.
107
The subtitle is
not displayed.
Check whether the HOLD switch on remote is ON.
(Switch to OFF position)
Check whether the rechargeable batteries are not
charged.
Check that the batteries were properly inserted into
the external battery pack.
Be sure your adapter is designed to work in the
country where it's being used.
Check whether the plug is connected to the proper
jack on the player.
Check whether the HOLD switch is ON.
(Switch to OFF position.)
Connect the earphones/remote plug firmly.
Check whether the battery is discharged. If the
battery is discharged, the clock is initialized to
00:00 after approx. ?? days.
Set the current clock (Refer to page ??)
The player supports the lyric of LDB format.
Set Mode -> visualization to Lyric.
The player supports the subtitle of SMI format.
The caption files (*.smi) that have same name with
the motion picture file must be in the same folder.
Check whether the caption is set to On .
108
Additional
Information
5-2. Troubleshooting!
Additional
Information
5-2. Troubleshooting!
Should any problem continue after you have checked these symptoms,
please contact iRiver customer support.
Solution
Trouble
Poor FM
Reception
Adjust the position of the player and remote control.
Electronic equipment can case interference with the
FM reception. Turn off any nearby electronics or
move the player away from the source.
Earphone and remote control play a role as FM
antenna. Then if not connected, connect earphone
and remote control to the player.
Nothing is
displayed on the
LCD screen.
Check the TV/HOLD/LCD switch is set to TV.
In that case, nothing is displayed on the LCD screen
of the player.
Image on TV is
unstable,
flickering, fuzzy,
or otherwise
non-viewable.
What kind of TV do you use?
Set up General->Display->Video Out according to
type supported by your TV or monitor. When you
select NTSC (PAL), the motion picture is normally
played on the TV for NTSC (PAL).
Video files are
smaller than the
screen.
Video files do
not display
properly.
Trouble
109
The image not adhering to product specification
may not display.
Please, check the specification.
While playing audio file, the display is automatically
turned off to save the battery as the set time passes.
You can adjust the backlight time on the Setup Menu.
Check whether VOLUME is set to 0 .
Connect the earphone/remote plug firmly.
Check whether the plug is dirty (clean the plug with a
dry and soft cloth).
Corrupted MP3, WMA, ASF or AVI file may have
distortion or not play.
Try playing another music file.
Excessive jolting may affect MP3, WMA, ASF and
AVI disks during playback.
Check it at the stable place.
During playback, excessive shock and continuous
jolting may cause noise or distortion.
Check it at the stable place.
Picture files does
not display.
Display turns off
repeatedly.
Audio files do not
play properly.
Either no sound
is heard or
defects are heard.
The display is determined by the settings used to
create the AVI file. Please consult your AVI creation
software documentation for settings.
When playing a motion picture, the loading time of a
motion picture is longer than the MP3 or WMA
formats because file size to read is larger than its of
the MP3 or WMA formats. That is not malfunction.
For motion picture file not conforming to product,
audio or video may not be able to play. Also screen
or sound may show erratic behavior. Check the
specification about the file.
Only MP3 and WMA format are supported for motion
picture audio. It may not play if the formats are AC3
or DTS.
AVI files created in higher resolutions than
indicated in the Specifications section may not
playback properly.
Solution
Characters in
LCD are
corrupted..
Batteries do not
charge.
Check out Menu General Language and confirm
whether the right language has been selected.
Check whether the adapter plug is properly
connected.
Fully charged batteries will not accept additional
charging.
110
5-3. Specifications
Additional
Information
5-3. Specifications
Additional
Information
File Specifications
General Specifications
Category
Specifications
File Type
Bit Rate
Tag
‰
–
Video Frame Rate
…
111
…
1. For damaged audio or motion picture file, screen or sound may show
erratic behavior or may not be able to play.
2. If video resolution is larger than product specification, screen or sound
may not play.
3. Other than MP3 or WMA, motion picture audio format (AC3, DTS, AAC, etc),
may possible only to display without sound or not being able to play at all.
4. Motion picture formats (WMV etc.) other than DivX may only play sound
without picture or not be able to play at all.
5. For AVI file not conforming to product specification, Virtual Dub or other
similar software can be used to convert to product specification conforming
format to play properly.
6. For XviD motion picture video format, depending on encoding program,
some may not be able to play.
7. Only Bassline (Non-progressive), JPG and BMP image file are supported.
8. Image files may not display if files are larger than specification,
or they are damaged.
112
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:06:17 17:58:26+09:00
Create Date                     : 2004:06:17 17:58:12+09:00
Producer                        : Acrobat Distiller 4.0 for Macintosh
Page Count                      : 9
Mod Date                        : 2004:06:17 17:58:26+09:00
Creation Date                   : 2004:06:17 17:58:12+09:00
Metadata Date                   : 2004:06:17 17:58:26+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools