DT Research 800D Mobile Tablet User Manual DT311 for FCC

Download:
Mirror Download [FCC.gov]
Document ID	2680817
Application ID	/raRPVj78cTvgYzsO0Tbog==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.62kB (582699 bits)
Date Submitted	2015-07-15 00:00:00
Date Available	2016-01-11 00:00:00
Creation Date	2017-09-24 04:07:32
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-24 04:07:32
Document Title	Microsoft Word - DT311 User manual for FCC.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	carol

DT311
BASIC OPERATION GUIDE
ENGLISH
INTRODUCTION
Thank you for acquiring the latest addition to DT Research’s line of tablets — the DT311.
Featuring a slim yet robust enclosure, the DT311 with 11.6” TFT display is powered by the Intel®
processor, offering optimal combinations of performance and power savings.
The DT311 is available with Microsoft® operating systems. Each software operating system
features web browser, client/ server computing software, media player, accessories, and
applications support.
PACKAGE CONTENTS
• One DT311 with Battery Pack and Handstrap
• Capacitive Touch Stylus and Lanyard
• AC‐DC Power Adapter with Power Cord
• Basic Operation Guide
*The actual package contents may vary depending on the configuration acquired.
DT311
DT311:
Input/ Output Ports
Button Functions
USB 3.0 port
Headphone Jack
programmable button
DC Power Input
power button
Smart Card Reader
Keyboard Wedge
Back Camera
ENGLISH
BUTTON
ACTION
Power/Battery LED Status:
•
•
•
•
Blue indicates the battery is 25% to 100% charged
Blinking blue indicates the battery is charging
Orange indicates that the battery is between 11% to 25%
Blinking Orange indicates that the battery is below 10%
Precautions
Always exercise care when operating and handling the DT311.
Do NOT apply excessive pressure to the display screen.
Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT311
should face away from direct light to reduce glare.
• If the AC‐DC power adapter is used to recharge or power the tablet, do NOT use any AC‐DC adapter other
than the one provided or acquired from the manufacturer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the
DT313 and disconnect all power sources. Report the problem to your device provider immediately.
• Never attempt to disassemble the DT311, as this will void the warranty.
•
•
•
THE DT311
Basic Features
The DT311 wireless tablet integrates a bright and multi‐touch display, one USB port, and embedded
networking elements such as wireless LAN and Bluetooth. The DT311 is complemented by a suite of
accessories, including battery expansion, charging cradles, and battery charger kit, for a comprehensive user
experience.
A DT311 typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other wireless
devices or access points. If your DT311 does not come with such a network adapter, please consult your
device provider to establish the desired network connectivity
ENGLISH
DT311
OPERATION
Internal Battery
Warning!
The Internal battery pack should only be replaced by an authorized DT Research service representative.
Please contact your product and/or service provider for internal battery replacement service.
Powering ON and OFF
To activate the DT311, push and quickly release the Power Button. The display will come on in a few seconds.
To put the DT311 in Standby mode, push and quickly release the Power Button. To turn the DT311 off for
extended storage, power off safely using any software function that "shuts down computer" provided in the
software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the AC‐DC
adapter with the DT311 when setting up for the first time to fully charge the internal battery
pack. You may charge the external battery pack with it attached to the DT311, or with the
optional external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue‐colored Battery LED should blink slowly. If
plugging in the AC‐DC adapter does not trigger this blinking activity and the LED stays dark,
the battery pack(s) may have been drained substantially. Try unplugging/ replugging the
AC‐DC adapter to the DT311 a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the tablet in
“Standby” mode while not in use. Pushing briefly on the same button will wake up the system
within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this form of
hardware shutdown is intended to be a means of recovery from lockups, and not as normal
operation.
ENGLISH
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a
launch sequence of several seconds. The wireless LAN connection may take 10‐15 seconds to be established.
Configuring the Mobile Tablet
The DT311 may be configured using the utilities and methods dictated by the software operating system. The
DT311 should be configurable for various properties such as user profiles, network features, and several
system elements.
Wireless Networking
Wireless LAN
The DT311 is often delivered with an embedded (user‐inaccessible) 802.11ac WLAN adapter equipped with a
hidden custom antenna.
• Through the support of typical WLAN adapters, the DT311 should be able to detect all 802.11 access
points in the vicinity for you to select the access point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311 and the access points have to
match. The SSID is case‐sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or
advanced alternatives) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication mode,
etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
ENGLISH
DT311
Bluetooth
The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility
Center. Follow the instructions and options provided within the application to configure and invoke
Bluetooth connectivity with the corresponding peripherals.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the DT311 supports a wide range of USB‐based peripherals. These peripherals are
applicable for software installation, applications storage, data storage, and system software recovery and
updates.
Remote Management
Depending on software configuration, the DT311 can be centrally managed for asset monitoring and for
software control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.
To Hold the Tablet
Left hand: grip the left back side of the tablet with your left hand
four index fingers, with thumb resting on the top of the back side
of the tablet and palm securely against the back.
Right hand: grip the right back side of the tablet with your right
hand four index fingers, with thumb resting on the top of the back
side of the tablet and palm securely against the back.
ENGLISH
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
DT311
Specifications:
DT311
Item
System
CPU
Intel® Core™ i7, 2.4GHz (4M Cache, up to 3.0GHz)
RAM
8GB
Storage
64GB to 512GB flash
Operating System
Display
Microsoft® Windows® Embedded Standard 7, 7 Professional, Embedded 8 Standard or 8.1 Pro Industry
11.6” LED‐backlight screen with capacitive touch
Display Resolution
1920 x 1080 (Full‐HD)
Network Interface
Wi‐Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.0 LE
Control Switch and
Buttons
1 power button, 1 RF switch and 2 programmable buttons
Indicator
Microphone
1 power/ battery status LED and 1 WLAN active LED
Built‐in microphone with DSP for video conference call
Speaker
2W built‐in speaker
Camera
5 megapixel back camera with LED flash, auto focus, white balance, gain control and exposure control
I/O Ports
USB port
1 USB3.0 port
Audio Jack
1 (3.5mm)
DC‐in
Smart Card Reader
Full‐slot, reads ISO 7816 T=0, T=1; 1.8/3/5V smart card
Mechanical
AC/DC Adapter
Battery Pack
Enclosure
Stylus
Input: 100 – 240V AC; Output: 19V DC, 3.42A
Hot Swappable battery, 7.2V, 6150mAh
ABS + PC plastics and magnesium‐aluminum alloy
Yes, capacitive touch stylus
Protective Grips
Dimensions (H x W x D)
Rubber bumpers on each corner with handstrap for handling protection
8.2 x 12.3 x 0.86 in/ 208.2 x 312.3 x 22 mm
Weight
2.76 lbs/ 1.25 kg
Environmental
Water and Dust
Resistance
Vibration and
Shock Resistance
Regulatory
Operating Temperature
Humidity
IP65
MIL‐STD‐810G
FCC Class B, CE, RoHS compliant
Operation: 0°C ~ 40°C (Upgrade option: ‐20°C ~ 50°C); Storage: ‐20°C ~ 60°C
0% – 90% non‐condensing
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
Copyright © 2015, DT Research, Inc. All Rights Reserved.
ENGLISH
BOG060815DT311ENG
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for
SAR are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the device
while operating can be well below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only the poser required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the
power output.
This device was tested according to FCC SAR procedure, and was tested directly contacted
with the Body. While there may be differences between the SAR levels of various devices
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : carol
Create Date                     : 2015:07:08 17:35:03+08:00
Modify Date                     : 2015:07:15 19:45:41-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2015:07:15 19:45:41-07:00
Format                          : application/pdf
Title                           : Microsoft Word - DT311 User manual for FCC.doc
Creator                         : carol
Document ID                     : uuid:49ce5d34-431e-43bc-a871-b2e68b4e800f
Instance ID                     : uuid:6fd3702e-06f2-482e-b7d3-01a0a998378f
Page Count                      : 10

EXIF Metadata provided by EXIF.tools