DT Research 800I Mobile Tablet User Manual DT301 BOG for FCC CE

Download:
Mirror Download [FCC.gov]
Document ID	3077260
Application ID	YxAR9eu5jMg+jevOD/cVYA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.21kB (1115065 bits)
Date Submitted	2016-07-26 00:00:00
Date Available	2016-07-26 00:00:00
Creation Date	2016-07-18 14:43:11
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-07-18 14:43:11
Document Title	Microsoft Word - DT301_BOG for FCC&CE.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	carol

DT301
BASIC OPERATION GUIDE
ENGLISH
INTRODUCTION
Thank you for acquiring the latest addition to DT Research’s line of tablets — the DT301.
Featuring a slim yet robust enclosure, the DT301 with 10.1” capacitive touch display is powered
by the Intel® processor, offering optimal combinations of performance and power savings. The
DT301 is available with Microsoft operating system. The operating system features web browser,
client/ server computing software, media player, accessories, and applications support.
PACKAGE CONTENTS
• One DT301 with Battery Pack and Handstrap
• Capacitive Touch Stylus and Lanyard
• AC‐DC Power Adapter with Power Cord
• Basic Operation Guide
DT301
DT301:
Input/ Output Ports
Button Functions
Headphone Jack
BUTTON
ACTION
USB 3.0 Port
power button
DC Power Input
programmable button
Smart Card/CAC Reader
Battery Latch
Back Camera (optional)
• Push the switch to unlock the latch,
than slide the latch to left to remove
the battery.
Wifi switch
ENGLISH
Precautions
•
Always exercise care when operating and handling the DT301.
•
Do NOT apply excessive pressure to the display screen.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT301
should face away from direct light to reduce glare.
•
If the AC‐DC power adapter is used to recharge or power the tablet, do NOT use any AC‐DC adapter other
than the one provided or acquired from the manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the
DT301 and disconnect all power sources. Report the problem to your device provider immediately.
•
Never attempt to disassemble the DT301, as this will void the warranty.
Basic Features
The DT301 wireless tablet integrates a bright display, one USB port, and embedded networking elements
such as wireless LAN and Bluetooth or optional 4G. The DT301 is complemented by a suite of accessories,
including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience.
A DT301 typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other wireless
devices or access points. If your DT301 does not come with such a network adapter, please consult your
device provider to establish the desired network connectivity.
ENGLISH
DT301
OPERATION
Internal Battery
Warning
The Internal battery pack should only be replaced by an authorized DT Research service representative.
Please contact your product and/or service provider for internal battery replacement service.
Powering ON and OFF
To activate the DT301, push and quickly release the Power Button. The display will come on in a few seconds.
To put the DT301 in Standby mode, push and quickly release the Power Button. To turn the DT301 off for
extended storage, power off safely using any software function that “shuts down computer” provided in the
software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the AC‐DC
adapter with the DT301 when setting up for the first time to fully charge the internal battery
pack. You may charge the external battery pack with it attached to the DT301, or with the
optional external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue‐colored Battery LED should blink slowly. If
plugging in the AC‐DC adapter does not trigger this blinking activity and the LED stays dark,
the battery pack(s) may have been drained substantially. Try unplugging/ replugging the
AC‐DC adapter to the DT301 a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the tablet in
“Standby” mode while not in use. Pushing briefly on the same button will wake up the system
within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this form of
hardware shutdown is intended to be a means of recovery from lockups, and not as normal
operation.
ENGLISH
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a
launch sequence of several seconds. The wireless LAN connection may take 10‐15 seconds to be established.
Configuring the Mobile Tablet
The DT301 may be configured using the utilities and methods dictated by the software operating system. The
DT301 should be configurable for various properties such as user profiles, network features, and several
system elements.
Wireless Networking
Wireless LAN
The DT301 is often delivered with an embedded (user‐inaccessible) 802.11ac WLAN adapter equipped with a
hidden custom antenna.
•
Through the support of typical WLAN adapters, the DT301 should be able to detect all 802.11 access
points in the vicinity for you to select the access point of your choice for connection.
•
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301 and the access points have to
match. The SSID is case‐sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or
advanced alternatives) for secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication mode,
etc.
•
Refer to the access point operating manuals for setting up the 802.11 access points.
ENGLISH
DT301
Bluetooth
The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility
Center. Follow the instructions and options provided within the application to configure and invoke
Bluetooth connectivity with the corresponding peripherals.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the DT301 supports a wide range of USB‐based peripherals. These peripherals are
applicable for software installation, applications storage, data storage, and system software recovery and
updates.
Remote Management
Depending on software configuration, the DT301 can be centrally managed for asset monitoring and for
software control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.
To Hold the Tablet
Left hand: grip the left back side of the tablet with your left hand
four index fingers, with thumb resting on the top of the back side
of the tablet and palm securely against the back.
Right hand: grip the right back side of the tablet with your right
hand four index fingers, with thumb resting on the top of the back
side of the tablet and palm securely against the back.
ENGLISH
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co‐located or operating in conjunction with any other
antenna or transmitter.
This Class [B] digital apparatus complies with Canadian ICES‐003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB‐003 du Canada.
ENGLISH
DT301
Specifications:
DT301
Item
System
CPU
Intel® 6th Generation Core™ i7, 2.6GHz
RAM
8GB
Storage
128GB flash
Operating System
Microsoft® Windows® 7 Professional or Windows® 10 IoT Enterprise
Display
10.1” LED‐backlight screen with multi touch capacitive touch
Display Resolution
1920 x 1200
Network Interface
Wi‐Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.0 LE
Control Switch and
Buttons
1 power button, 1 Wifi switch and 3 programmable buttons
Indicator
1 power/ battery status LED
Microphone
Built‐in microphone with DSP for video conference call
Speaker
Built‐in speaker
Camera(optional)
5 megapixel back camera with LED flash, auto focus, white balance, gain control and exposure control
I/O Ports
USB port
1 USB3.0 port
Audio Jack
1 (3.5mm)
DC‐in
Smart Card/CAC Reader
Full slot, reads ISO 7816 T=0, T=1; 1.8/3/5V smart card
Mechanical and Environmental
AC/DC Adapter
Battery Pack
Enclosure
Stylus
Input: 100 – 240V AC; Output: 19V DC, 3.42A
Hot Swappable battery, 7.2Vdc, 6150mAh
ABS + PC plastics and magnesium‐aluminum alloy
Capacitive touch stylus or digitizer digital pen
Protective Grips
Dimensions (H x W x D)
Rubber bumpers on each corner for handling protection
7.5 x 10.7 x 0.86 in/ 190 x 272 x 21.9 mm
Weight
2.86 lbs/ 1.3 kg
Regulatory
Operating Temperature
Humidity
FCC Class B, CE, RoHS compliant
Operation: 0°C ~ 40°C ; Storage: ‐20°C ~ 60°C
0% – 90% non‐condensing
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
Copyright © 2016, DT Research, Inc. All Rights Reserved.
ENGLISH
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for
SAR are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the device
while operating can be well below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only the poser required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the
power output.
This device was tested according to FCC SAR procedure, and was tested directly contacted
with the Body. While there may be differences between the SAR levels of various devices
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2016:07:18 14:43:11+08:00
Create Date                     : 2016:07:18 14:43:11+08:00
Format                          : application/pdf
Title                           : Microsoft Word - DT301_BOG for FCC&CE.doc
Creator                         : carol
Document ID                     : uuid:48dfeb6a-1947-481b-b59f-e0a7f025319f
Instance ID                     : uuid:57df57dd-10bc-496e-bc5e-7cdde8dd94e0
Page Count                      : 10
Author                          : carol

EXIF Metadata provided by EXIF.tools