DTC Communications PD2TX250S MOBILE VIDEO TRANSMITTER OPERATING IN S-BAND User Manual USERS MANUAL
DTC Communications Inc. MOBILE VIDEO TRANSMITTER OPERATING IN S-BAND USERS MANUAL
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1290683 |
| Application ID | 9E2KdR03Wq1SrzlqPBdDgA== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 253.45kB (3168112 bits) |
| Date Submitted | 2010-06-04 00:00:00 |
| Date Available | 2010-06-04 00:00:00 |
| Creation Date | 2010-03-23 07:48:01 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2010-06-02 08:48:36 |
| Document Title | USERS MANUAL |
| Document Creator | Adobe InDesign CS4 (6.0.4) |
Palladium II Digital COFDM Transmitter Model Pd2-TX-250 250 mW Output The most important thing we build is trust how to contact COBHAM copyright notice For operator and troubleshooting information, customers are encouraged to refer to the details in this manual. For additional clarification or instruction, or to order parts, contact COBHAM. Copyright © 2005 - 2010 Customer Service is available Monday through Friday between the hours of 9:00 AM and 5:00 PM EST at: Tel: 603-880-4411 Fax: 603-880-6965 Website: www.cobham.com/dtc Email: dtc.info@cobham.com DTC Communications dba Cobham Surveillance 486 Amherst Street COBHAM All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, including but not limited to electronic, magnetic, mechanical, optical, chemical, manual or otherwise, without the prior written permission of COBHAM. disclaimer The information in the document is subject to change without notice. COBHAM makes no representations or warranties with respect to the contents hereof, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. COBHAM reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of COBHAM to notify any person of such revision or changes. Nashua, New Hampshire 03063 PN OP1920458 REV D TABLE OF CONTENTS manual conventions NOTE: Describes special issues you should be aware of while using a particular function. WARNING: Calls out situations in which equipment could be damaged or a process could be incorrectly implemented, but in which operator safety is not a factor. TIP: Describes application hints. RF EXPOSURE STATEMENT This Unit is NOT FCC-approved for body-worn applications. A separation distance of at least 20 cm MUST be maintained between the antenna and the body of the user or nearby persons. Quick Start .....................................................................................................................4-5 Accessories ......................................................................................................................... 5 Introduction ......................................................................................................................... 6 Operation ......................................................................................................................... 7 Using your Palladium II Transmitter................................................................. 7 Changing your Transmitter Configuration..................................................... 7 Heat Sink .....................................................................................................................8-9 Components ............................................................................................................... 10-11 Programming ............................................................................................................... 12-19 System PC Controller Application Software............................................................12 Transmitter Control Application....................................................................................13 Specifications ............................................................................................................... 20-21 Warranty .......................................................................................................................22 Contact Us .......................................................................................................................23 When the unit is used consistent with the two previous notices, it complies with FCC radiation exposure limits set forth for an uncontrolled environment, per FCC Rules & Regulations, sections 1.1307, 2.1091 & 2.1093, as required by section 90.1217. NOTE: This device is for occupational use only. Occupational users are those persons who are exposed as a consequence of their employment, provided these persons are fully aware of and exercise control over their exposure. NOTE: DO not allow the device to directly contact the skin due to warm operating temperatures. QUICK START Complete these steps: A2 A1 R/M Palladium Transmitter, Top View 1 Connect the transmitter antenna to the SMA connector on the bottom of the Palladium unit. 2 If you plan to use audio, connect one or two microphones to the Audio 1 and/or Audio 2 LEMO connectors. If using monaural, use Audio 1. 3 Connect power and video input via the Multi I/O cable to the 6-pin Hirose connector: a Attach your camera video input (75 ohm composite video source in PAL or NTSC) to the Multi I/O cable BNC connector. b Apply the necessary power to your camera (use supplied cable or external source) and turn ON. c Attach a 12 VDC power source to the Multi I/O cable via the Molex connector. The input voltage range is from 10 to 16 VDC. WARNING: Do not apply power to the transmitter unless an antenna or nonradiating load is connected to the Antenna SMA connector. Came ra Power Option CHANNEL TELEM ETRY Audio Power Supply Thermal Issues Palladium II VIDEO TX Antenna Typical Wiring Configuration 4PALLADIUM II Proper heat sink mounting is recommended for optimal performance. See page 8 for heat sinking instructions. QUICK START Audio TELEMETRY CHANNEL 4 Set to the required configuration as indicated by the channel numbers. Refer to the Programming section on page 10 for more information on channel settings. Your Transmitter is now operational. Confirm its signal with your Palladium Receiver. Accessories • 12 VDC 2.5A Power Supply & AC Line Cord • Microphone • Power & Video Cable • Camera Power Cable (2.1 mm plug) • DC Power Cable, flying lead • Camera Power Cable, flying lead • Programming Cable Power Option Palladium II VIDEO TX • Antenna, ANT2A • Palladium II Configuration Software • 16-Pin Data Chaining & Control Connector Cable • Transport Case Antenna Connector Palladium Pd2-TX-250 Transmitter, Front View INTRODUCTION Audio CHANNEL TELEMETRY Palladium II The Palladium II Series of digital video transmitters provide exceptional video quality in high multipath environments. They are ideal for use inside buildings, in urban areas, and in other applications where multipath would normally cause video tearing or breakup. All Palladium II Series transmitters offer three bandwidth modes: DVB-T (6, 7, 8 MHz), Narrow (2.5 MHz), and Ultra Narrow (1.25 MHz) channel spacing. DVB-T utilizes 2000 carriers to transmit video and two channels of voice and data. Palladium II transmitters may be located on adjacent channels without a guard band. AES 128-bit encryption ensures users of secure communications. The Palladium 250 is a small transmitter with a 250 mW RF power output. This unit is ideal for concealments and shorter range robotic and UAV applications. The package is only 4.2” x 2.6” x 0.65” (approximate dimensions not including connectors). Power consumption is 12 Watts maximum. All connections are conveniently located off the ends of the unit. Palladium II VIDEO TX Palladium Pd2-TX-250 250-Milliwatt Digital Transmitter OPERATION Using your Palladium II Transmitter Follow the instructions given in the Quick Start section on pages 4-5. When power is first applied to the Palladium, the unit reverts to the indicated channel and RF ON state. The Alarm LED may be ON, which indicates that there is no active video input. Changing your Transmitter Configuration The Palladium Transmitter can store up to 8 different configurations, which can be selected with the Channel Control. Each of these configurations can be programmed into the Transmitter with the supplied DTC Programming Software and a Windows PC. Refer to the Programming section on page 10 for more information. To cycle through your preconfigured channels rotate the knob to the next setting. HEAT SINK 2.530 3.935 HEAT SINK Palladium 250 Heat Sink The Palladium 250 is supplied with a heat sink attached. DO NOT remove the heat sink unless you have an alternate mounting surface that will dissipate the heat properly. In ambient temperatures of 25oC or less, the transmitter chassis should be held at 50oC or less. WARNING: The Palladium 250 may become too hot to touch without a proper heatsink attached, such as the one supplied. Damage to internal components may occur if operated beyond the recommended temperature range. If placed in an enclosure, proper ventilation and mounting is required. If designing a custom heatsink, keep the transmitter chassis temperature at 50oC or less. The transmitter must be mounted to a heatsink on the transmitter’s “blank side” as shown on page 8. COMPONENTS Top Controls/Connectors Multi-I/O Connector The Multi-I/O Connector is covered on page 9. Data Chaining & Control Connector This connector is normally covered. Audio 2 (left) and Audio 1 (right/mono) LEMO Conn. These connectors provide the audio input connections to the transmitter. Either one or two audio inputs can be used with the Palladium II Transmitter. ALARM LED This red LED indicates a valid video signal is not present. 10 COMPONENTS Transmitter Antenna Connector (SMA) This connector attaches to the transmitter antenna and carries the RF output signal. Always ensure the transmitter antenna is attached before operating the Palladium Transmitter. Palladium II VIDEO TX Video In 75 Ohm 6 Muiti I/O Connector (6-pin Hirose) This connector provides connections for the DC Power Input, DC Camera Power, Programming, and 75 Ohm Composite Video Signal. RS232 In 5 RS232 Out 4 1 Ground 2 +V Power 10V - 16V 3 Camera Power Out 10V -16V 11 PROGRAMMING Getting Started System PC Controller Application Software • Use the supplied programming cable to connect the chosen COM port of your PC to the transmitter to be configured. • Launch the application by double clicking or using the Run... command. • Connection with a transmitter should be automatic, but the user can force selection of the correct COM port using the drop down, followed by the Connect button. • Select the channel to be configured from the unit’s front panel Channel Switch. • Click Refresh in the application to display the current configuration. • Update the current settings in the application, then click Apply to save to memory. Advanced control of the system is available by using the PC control application software. Typically users may want to customize the default configurations to control settings such as frequency, scrambling keys, modulation parameters, and video resolution. The transmitter is controlled by the application DTC_tx_ctrl_v1_3.exe (or higher) available on the CD delivered with the product. A PC is required with an available RS232 Serial COM port to control the transmitter. Installation of the control program is as simple as copying the file from the CD to a suitable location on the PC. No install shield routine is launched. Note that the application generates its own log and initialization files, so it is best to create a dedicated directory for these applications, perhaps with links to the applications from the desktop of the PC. PROGRAMMING CABLE to Came ra PROGRAMMING PC SERIAL RS-232 PORT CABLE To PC Serial RS-232 PORT Power Option Audio CHANNEL TELEM ETRY AUDIO INPUT(S) 10 AA BATTERY PACK Power Supply Palladium II TELEMETRY ANTENNA VIDEO TX Palladium II VIDEO TX Antenna 12 PALLADIUM II PROGRAMMING Transmitter Control Application Output Frequency (MHz) The Output Frequency setting allows selection of TX output frequency in increments of 0.250 MHz within the allowed tuning range of the unit. If the unit is set to a frequency that is not an integer multiple of 0.25 MHz, the unit will be automatically set to the closest frequency that is an integer multiple of 0.25MHz. Modulation Bandwidth Modulation Bandwidth is the actual channel bandwidth that the wireless video link will occupy. The DVB-T compliant mode requires a bandwidth setting of 6, 7 or 8 MHz. The narrowband mode bandwidth is either 1.25 or 2.5 MHz. Narrower bandwidths increase receiver sensitivity and extend the maximum distance of the link, however video quality and latency will suffer. Normal default for good quality video is 2.5MHz. The modulation bandwidth may be set to 1.25 MHz, 2.5 MHz, 6 MHz, 7 MHz, or 8 MHz. Modulation Output This control is used to turn ON and OFF the RF output. It must be ON for operation. Turn the transmitter RF power ON by selecting ON and Apply from the application. Narrowband FEC Narrowband FEC sets the forward error correction rate in the narrow bandwidth modes of 1.25 or 2.5 MHz. Tthe two rates are available are 1/3 and 2/3; the normal default setting for good quality video is 2/3. Changing the FEC rate to 1/3 will extend the receiver sensitivity by 2 to 3 dB at the expense of degraded video quality and longer latency. Narrowband Guard Interval Narrowband guard interval is used in the narrowband modes of 1.25 and 2.5MHz to adjust for varying multi-path delay conditions. The default is 1/16 however 1/8 can be selected if necessary to deal with extreme multi-path delays on long links. Selecting 1/8 guard interval could cause a degradation in video quality and latency. Narrowband Modulation Narrowband modulation is used in the narrowband modes to select between QPSK and 16QAM modulation. For best range with good video quality, QPSK is used; 16QAM will give better video quality but will cut down the link range by approximately 50%. 13 PROGRAMMING DVBT Service Name DVB-T service name is a place to assign a name for the DVB-T configuration. Press Apply to save the new name. DVBT FEC Rate DVB-T FEC rate selects forward error correction rates in the wideband DVB-T modes. Options are 1/2, 2/3, and 3/4, with 1/2 giving best range and 3/4 possibly giving better video quality under certain conditions, recommended default is 1/2. DVBT Guard Interval DVB-T guard interval selects guard intervals in the wideband DVB-T modes between 1/32 and 1/4. Use the smallest guard interval that will allow reliable low error rate communications, this parameter may need to be adjusted when the link is relocated; the recommended default is 1/16. DVBT Modulation DVB-T modulation selects the modulation used in the wideband DVB-T mode. Modulations QPSK, 16QAM, or 64QAM can be selected. QPSK will give best distance and in most cases very good video quality and low latency. DVBT Spectrum Inversion DVB-T spectrum inversion allows flipping the modulated spectrum to compensate for spectrum inversion that may take place on the receiver side due to high side LO injection. DVBT 4 KHz Offset DVB-T 4 KHz offset is not normally used but might improve BER in cases where the TX upconverter I/Q balance is poor. 14 PROGRAMMING Preset Transmit Mode Preset transmit mode allows the user a convenient means of automatically setting bandwidth, FEC, modulation and video frame rate/compression based on link distance requirements. Options are: None (preset mode not used), Short Range, Medium Range, Long Range, Ultra Long Range. Output Power Output power selects one of two output power attenuator settings; low power or high power, typically the low power setting is the larger of the two attenuator settings and is used, for instance, if a power amplifier is added to the transmitter and the output power needs to be lowered substantially to prevent overloading the input of the power amplifier. Output Attenuation (dB) Output attenuation (dB) is the high power attenuator setting. This control can be used to make minor adjustments to the output power level, but in normal operation should NOT be changed from factory settings. (0 attenuation = full output power, greater than 0 attenuation = reduced power in 0.25 dB steps.) Output Attenuation low (dB) Output attenuation low (dB) is the low power attenuator setting. 15 PROGRAMMING Video Input Video input selects the video format going into the MPEG video compressor. Options are: OFF (no video input typically used when link is used for data only), PAL, NTSC, NTSC no pedestal, S-Video PAL, S-Video NTSC, S-Video NTSC no pedestal. MPEG Mode MPEG mode selects the MPEG compression being used, options are: MPEG2 or MPEG4. MPEG4 mode has to be used when in the 1.25 MHz bandwidth mode since this mode uses a nonstandard frame rate that is not supported by MPEG2. MPEG4 Encoding Mode MPEG4 encoding mode selects the characteristics of the MPEG4 compression. Options are: low delay interlaced, standard delay interlaced, low delay progressive, standard delay progressive, and SIF. Interlaced scanning is what is used in conventional over-the-air video. Progressive scan is available on some cameras and involves scanning an entire frame in one pass rather than two in interlaced scanning. SIF is a bandwidth-conserving camera scan mode that cuts resolution in half in both the horizontal and vertical. MPEG4 Frame Rate MPEG4 frame rate selects the frame rate used in the MPEG4 mode, full frame rate is 30 fps for NTSC and 25 fps for PAL a frame rate of 1/2 or less has to be used in 1.25 MHz bandwidth mode. Options are: Full, 1/2, 1/4, 1/8. or 1/24. Video Bitrate (status only) Video bitrate is a status window that will display the video transport data rate, this varies with bandwidth, modulation, FEC rate and guard interval. The rate will increase with bandwidth and higher levels of modulation, it will go down as the FEC rate and guard interval are increased. The video bit rate will also decrease as other service options are activated such as audio and data channels. As a rule video quality and latency improve as the bit rate is increased. Horizontal Resolution Horizontal resolution determines the maximum number of horizontal Pixels that can be sampled by the video encoder. For optimal performance this setting should be set to the first value that exceeds the horizontal resolution of the camera in use. Options are: 352, 480, 528, 704 pixels. 16 PROGRAMMING Video Sharpness Video sharpness is a filter that may be switched in to smooth out blockiness in the video. Audio Encoder Audio encoder selects quantity of active audio channels (2 maximum), sampling rate (8, 16 or 32 KHz) which determines upper frequency response, and sampling bits (8 or 12) which determines audio signal to noise. Options are: Off, 8 KHz 8 bit stereo, 16 KHz 8 bit mono, 16 KHz 8 bit stereo, 32 KHz 8 bit mono, 32 KHz 8 bit stereo, 32 KHz 12 bit mono, 32 KHz 12 bit stereo. Audio Input Level Audio input level selects the audio preamp gain level, options are: 0 dB, 12 dB, 24 dB, 36 dB, 48 dB. Use 24 dB for DTC supplied microphones. Note: 3.5 VDC phantom power is at the microphone input for powering electret condenser microphones. Unit Name Unit name allows the user to enter a name (up to 8 characters) for the transmitter that will be stored in memory. Sleep Mode Sleep mode shuts down most functions in the transmitter except the control functions. This can be used to conserve battery power and yet allow the transmitter to become active again with a simple command. Data Data allows activation of the RS232 half duplex serial data channel and to select parity mode. Data Baud Rate Data baud rate selects data channel baud rate, standard rates between 1200 and 115,200 baud are available. 17 PROGRAMMING Chaining Input Chaining input activates the chaining data port. This is not normally used except in repeaters and high speed data transmission products. Chain Number Chain no. (not normally used) assigns a chaining tag number to the stream associated with the transmitter’s video encoder. This can be user-defined to 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9. Normally 0. Chaining Output NOTE: Chaining is digital signal input and output through the 16-pin Data, Chaining, and Control Connector. Chaining output (not normally used) assigns the output of the video encoder to the chaining port. Normally OFF. Current Configuration Current config indicates the preset that is currently being programmed or viewed, this should be the same as the preset selected by the channel switch. Enter channel number and click Apply to change. Scrambling Scrambling selects 3 different scrambling options: OFF (no scrambling), AES128, AES256 (optional), or ABS (a proprietary 32 bit scrambling algorithym). Heartbeat Enable Heartbeat enable activates a flashing block on the screen video graphic to indicate that a link is still functioning even if there is no motion on screen. 18 PROGRAMMING File Change Logfile – opens a standard Windows file save dialog box which allows the user to change the path and name of the log file generated by the application. Exit – exits the control application. Options Timeouts – password protected access to change timeouts used during the serial communications between the unit and the controller. Engineering – password protected access to further diagnostic and calibration features. Write License Code – open a further password protected box for entering license codes for future upgrade. Change RS232 address – Changes RS232 address of configuration port, which is normally set to 1. Write AES Key – opens a dialog box for entering a customer-selected scrambling key. A key is a combination of 32 hexadecimal characters (64 for optional 256-bit encryption). Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. The receiver and transmitter must have identical AES keys. Restore Defaults – restores factory default settings in the transmitter. User should NOT select Restore Defaults. Polling Enabled – selecting this option makes the control application automatically refresh the data presented to the user every few seconds. Polling Options – selecting this option opens a dialog box for entering a customer-selected polling interval (in milliseconds). 19 SPECIFICATIONS 20 Physical Unit Dimensions not including heatsink or connectors (approx.) Unit Dimensions including heatsink and connectors (approx.) 4.2” x 2.6” x 0.65” (10.67 cm x 6.6 cm x 1.65 cm) 4.75” x 2.6” x 2” (12.07 cm x 6.6 cm x 5.1 cm) Weight Weight without heatsink Weight including heatsink 6.5 oz (0.185 Kg) 1 lb 0.6 oz (0.471Kg) Environmental Operational Temp -10 degrees C to 50 degrees C Power Input Voltage Power Consumption 10 to 16 VDC Fully Operational ~ 12 W max., Sleep Mode < 0.5 W Control PC Control Interface Memory RS-232. Eight user-programmable configurations Video Encoding Compression Standard Chrominance Profile Line Standard Horizontal Resolution Vertical Resolution Video Bitrates MPEG-2 w/ non-DVB modes, MPEG-4 DVB-T Compliant 4:2:0 PAL 625 or NTSC 525 704, 528, 480, 352 pixels (528 as standard) 576 (625 lines) or 480 (525 lines) 1Mbps to 10 Mbps SPECIFICATIONS Video Latency End to end delay of 54 milliseconds Audio Encoding Input Bitrates Sampling Frequency THD Response Crosstalk S/N Stereo or Dual Mono pair 28 kbps to 72 kbps depending on configuration 32 kHz, 16 kHz or 8kHz < 0.1% max 20Hz to 15KHz, +/- 0.25dB depending on configuration > 55 dB min 60 dB RMS Composite Video Input Standards Specification Connector Composite PAL and NTSC decoding NTSC (with and without pedestal) or PAL Rec. ITU-R BT.470-4 Hirose Eight-bit comb filtering composite decoder Analog Audio Analog Audio Input Nominal Level +10 dBu +4 dBu Scrambling Scrambling type Fixed key scrambling system Algorithms offered include AES. COFDM RF output Output Frequency Occupied Bandwidth Power Connector COFDM Standard DVB-T Band Dependent 1.22/2.44 MHz 250 mW SMA Proprietary, 2.5 MHz channel bandwidth. 6, 7, 8 MHz Bandwidth 21 TWO YEAR WARRANTY DTC Communications, Inc. (DTC) warrants its RF transmitting and receiving products to be free from defects in workmanship or material for a period of two (2) years from the date of shipment unless otherwise stated. The liability of DTC, Inc. under this warranty is limited to replacing, repairing, or issuing credit, at option, for any products, which are returned by the purchaser during such warranty period, provided: DTC is notified and a Repair Authorization Number is issued by DTC Customer Service within 30 days after discovery of such defects by Customer. The defective units are returned to DTC with transportation charged Prepaid by the Customer. Product damaged in shipment must be reported to and claim forms filed with the Carrier by the Customer. In shipments to the factory, notice and claim procedures will be initiated by DTC. DTC’s examination of such products shall disclose to its satisfaction that such defects exist and have not been caused by misuse, misapplication, neglect, improper installation, improper storage, alteration, physical damage or accidents. The warranty shall not apply to material or accessories ordinarily susceptible to field damage or of a disposable nature. Examples include batteries, antennas, microphones, headsets, cases, accessory bags, etc. The warranty shall not apply to Engineering Prototypes or Customer requested modifications to electronic circuits. This warranty does not apply to and DTC does not independently warrant items or systems sold by DTC which are produced by other manufacturers. With respect to such items, the Customer shall look to the warranty of the original manufacturer and DTC disclaims all warranty, expressed or implied. Nothing in this warranty, or any statement, brochure, bulletin, or advertisement is to be interpreted as establishing the suitability of any product for particular application or use. Applications of the product and the determination of suitability for any application, is the sole responsibility of the Customer. CONTACT US Contact Information Nashua Main Office Numbers 486 Amherst Street Nashua, New Hampshire 03063 USA (T) 603 880- 4411 (F) 603 880-6965 Toll Free in the USA 1- 800 233- 8639 Inside Sales Law Enforcement 1-800 233-8639 Military 1-800 233-8639 A complete listing of Contact Individuals can be located on our website at: www.cobham.com/dtc OEM 1-800 233-8639 REGIONAL SALES MANAGERS Howard Rich toll free (888) 819- 8570 voice (860) 626- 8570 fax (860) 626- 8571 NY, MA, CT, RI, PA, NJ, MD, DE, WV, DC hrich@cobham.com Joe Parkinson toll free (800) 515-0599 voice (928) 443-9399 fax (928) 443-9302 CA, AZ, NV, HI, UT, AK jparkinson@cobham.com Gary Nichols toll free (866) 794-2823 voice (765) 473-8917 fax (765) 473-8920 MN, WI, MI, IA, MO, IL, IN, OH, KY, NE gnichols@cobham.com Ed Bryant toll free (800) 396-0295 voice (903) 725-7229 fax (903) 725-6952 CO, KS, OK, AR, NM, TX, LA ebryant@cobham.com Phil Desmond toll free (800) 233-8639 voice (603) 546- 2217 fax (603) 880-6965 NH, VT, ME, WA, OR, ID, MT, ND, WY, SD pdesmond@cobham.com Frank Prioli toll free (800) 246-2610 voice (727) 392-4761 fax (727) 320-0509 FL, GA, AL, MS, TN, NC, SC, VA fprioli@cobham.com Federal Sales Len Corasaniti voice (202) 870-3905 fax (410) 544-6538 CO, KS, OK, AR, NM, TX, LA lcorasaniti@cobham.com Cobham Surveillance 486 Amherst Street • Nashua, New Hampshire 03063 • 603-880- 4411 www.cobham.com/dtc
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res Create Date : 2010:03:23 07:48:01-04:00 Creator : Adobe InDesign CS4 (6.0.4) Modify Date : 2010:06:02 08:48:36-06:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:04b4d655-a363-49f4-8e5e-e5cb503e7ea7 Document ID : xmp.did:F87F11740720681195FEEC18BBA6451E Original Document ID : adobe:docid:indd:2a62aa7c-d9d7-11de-87c7-f95b48c347e6 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:F77F11740720681195FEEC18BBA6451E Derived From Document ID : xmp.did:70AF149A1B206811B1A4C25634CBD15C Derived From Original Document ID: adobe:docid:indd:2a62aa7c-d9d7-11de-87c7-f95b48c347e6 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:0680117407206811B1A4F977EBD22541, xmp.iid:0780117407206811B1A4F977EBD22541, xmp.iid:0880117407206811B1A4F977EBD22541, xmp.iid:0980117407206811B1A4F977EBD22541, xmp.iid:0A80117407206811B1A4F977EBD22541, xmp.iid:FA7F11740720681195FEC0696E1BABEA, xmp.iid:FB7F11740720681195FEC0696E1BABEA, xmp.iid:FC7F11740720681195FEC0696E1BABEA, xmp.iid:FD7F11740720681195FEC0696E1BABEA, xmp.iid:FE7F11740720681195FEC0696E1BABEA, xmp.iid:FF7F11740720681195FEC0696E1BABEA, xmp.iid:008011740720681195FEC0696E1BABEA, xmp.iid:6C8210471720681195FEC0696E1BABEA, xmp.iid:6D8210471720681195FEC0696E1BABEA, xmp.iid:6E8210471720681195FEC0696E1BABEA, xmp.iid:6F8210471720681195FEC0696E1BABEA, xmp.iid:708210471720681195FEC0696E1BABEA, xmp.iid:718210471720681195FEC0696E1BABEA, xmp.iid:728210471720681195FEC0696E1BABEA, xmp.iid:738210471720681195FEC0696E1BABEA, xmp.iid:748210471720681195FEC0696E1BABEA, xmp.iid:758210471720681195FEC0696E1BABEA, xmp.iid:768210471720681195FEC0696E1BABEA, xmp.iid:EEE2AFA21B20681195FEC0696E1BABEA, xmp.iid:EFE2AFA21B20681195FEC0696E1BABEA, xmp.iid:F0E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F1E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F2E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F3E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F4E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F5E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F6E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F7E2AFA21B20681195FEC0696E1BABEA, xmp.iid:F8E2AFA21B20681195FEC0696E1BABEA, xmp.iid:9CCC13E61D20681195FEC0696E1BABEA, xmp.iid:9DCC13E61D20681195FEC0696E1BABEA, xmp.iid:9ECC13E61D20681195FEC0696E1BABEA, xmp.iid:9FCC13E61D20681195FEC0696E1BABEA, xmp.iid:A0CC13E61D20681195FEC0696E1BABEA, xmp.iid:A1CC13E61D20681195FEC0696E1BABEA, xmp.iid:A2CC13E61D20681195FEC0696E1BABEA, xmp.iid:A3CC13E61D20681195FEC0696E1BABEA, xmp.iid:5774B1663920681195FEC0696E1BABEA, xmp.iid:908CFADB2F206811B8409708EBBBB12B, xmp.iid:918CFADB2F206811B8409708EBBBB12B, xmp.iid:88254B0609206811B1A4C25634CBD15C, xmp.iid:70AF149A1B206811B1A4C25634CBD15C, xmp.iid:71AF149A1B206811B1A4C25634CBD15C, xmp.iid:72AF149A1B206811B1A4C25634CBD15C, xmp.iid:73AF149A1B206811B1A4C25634CBD15C, xmp.iid:74AF149A1B206811B1A4C25634CBD15C, xmp.iid:F77F11740720681195FEEC18BBA6451E, xmp.iid:F87F11740720681195FEEC18BBA6451E, xmp.iid:F97F11740720681195FEEC18BBA6451E, xmp.iid:FA7F11740720681195FEEC18BBA6451E, xmp.iid:FB7F11740720681195FEEC18BBA6451E, xmp.iid:81FACB760B20681195FEEC18BBA6451E, xmp.iid:F77F117407206811910998648E48F6B6 History When : 2009:11:23 15:49:31-05:00, 2009:11:23 15:49:31-05:00, 2009:11:23 15:59:26-05:00, 2009:11:23 16:00:40-05:00, 2009:11:23 16:28:14-05:00, 2009:11:24 08:41:35-05:00, 2009:11:24 08:55:50-05:00, 2009:11:24 08:57:48-05:00, 2009:11:24 09:00:28-05:00, 2009:11:24 09:19:33-05:00, 2009:11:24 09:21:58-05:00, 2009:11:24 09:25:33-05:00, 2009:11:24 10:33:26-05:00, 2009:11:24 10:33:52-05:00, 2009:11:24 10:34:50-05:00, 2009:11:24 10:37:23-05:00, 2009:11:24 10:39:08-05:00, 2009:11:24 10:40:33-05:00, 2009:11:24 10:41:34-05:00, 2009:11:24 10:43:26-05:00, 2009:11:24 10:44:31-05:00, 2009:11:24 10:51:26-05:00, 2009:11:24 11:02:01-05:00, 2009:11:24 11:04:38-05:00, 2009:11:24 11:05:39-05:00, 2009:11:24 11:07:04-05:00, 2009:11:24 11:07:32-05:00, 2009:11:24 11:09:40-05:00, 2009:11:24 11:12:22-05:00, 2009:11:24 11:14:43-05:00, 2009:11:24 11:15:07-05:00, 2009:11:24 11:16:08-05:00, 2009:11:24 11:17:07-05:00, 2009:11:24 11:18:27-05:00, 2009:11:24 11:20:50-05:00, 2009:11:24 11:21:25-05:00, 2009:11:24 11:22:52-05:00, 2009:11:24 11:25:14-05:00, 2009:11:24 11:25:51-05:00, 2009:11:24 11:31:03-05:00, 2009:11:24 11:31:46-05:00, 2009:11:24 11:32:24-05:00, 2009:11:24 14:40:38-05:00, 2009:12:04 14:36:51-05:00, 2009:12:04 14:36:51-05:00, 2010:02:12 11:24:31-05:00, 2010:02:12 11:24:31-05:00, 2010:02:12 11:24:48-05:00, 2010:02:12 11:29:17-05:00, 2010:02:12 11:30:23-05:00, 2010:02:12 11:33:14-05:00, 2010:03:22 13:55:04-04:00, 2010:03:22 13:55:04-04:00, 2010:03:22 13:57:40-04:00, 2010:03:22 13:59:35-04:00, 2010:03:22 14:01:43-04:00, 2010:03:22 15:05:41-04:00, 2010:03:23 07:47:47-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 72.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:03801174072068119109B12CF0423E05, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:e8e85aa2-4acf-8447-a29f-49aeeea35837, uuid:62ac1cbb-dc14-6a4f-a21b-1df37951bd6f, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, xmp.iid:F87F1174072068118DBBC1753FF8AC83, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, xmp.iid:F87F1174072068118DBBC1753FF8AC83, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, xmp.iid:03801174072068119109B12CF0423E05, xmp.iid:05801174072068119109B12CF0423E05, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:309D975137FADB11B045C66C76AF8F22, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:7b1d2ba3-e97d-634f-a4c0-59cbdaaab083, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:e8e85aa2-4acf-8447-a29f-49aeeea35837, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:d3cbbfbe-f670-0a43-8b45-8da6445456c6, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:4b063b2c-b69f-11db-b20e-dacb8af9bddc, uuid:739bf927-b6b1-11db-b20e-dacb8af9bddc, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB, uuid:6CF83D860EB0DD119AB6BECE5D1B15AB Manifest Reference Document ID : uuid:A8ADEA66E986DC11998C92199ED1D51B, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, xmp.did:F77F1174072068118DBBC1753FF8AC83, uuid:e7813329-3928-6948-bc8d-e6ac67b90328, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, xmp.did:F87F1174072068118DBBC1753FF8AC83, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, xmp.did:F87F1174072068118DBBC1753FF8AC83, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:A8ADEA66E986DC11998C92199ED1D51B, uuid:C3869000EF70DC11AACBE3F8B70B7BF6, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:2F9D975137FADB11B045C66C76AF8F22, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:0822fd5e-93e7-ca4c-bd4c-12e5414ce3ed, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, xmp.did:F77F1174072068118DBBC1753FF8AC83, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:bf65b20a-f5ae-564f-adf5-bedde3f544b0, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, adobe:docid:photoshop:4b063b27-b69f-11db-b20e-dacb8af9bddc, adobe:docid:photoshop:739bf924-b6b1-11db-b20e-dacb8af9bddc, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB, uuid:6BF83D860EB0DD119AB6BECE5D1B15AB Metadata Date : 2010:03:23 07:52:32-04:00 Creator Tool : Adobe InDesign CS4 (6.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7785 bytes, use -b option to extract) Doc Change Count : 189 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 24EXIF Metadata provided by EXIF.tools