DVS Korea VXA-4010 4-Inch Wide Touch Screen Navigation User Manual 4000 EN 070123 Page 1
DVS Korea Co., Ltd. 4-Inch Wide Touch Screen Navigation 4000 EN 070123 Page 1
User Manual
Thank you for purchasing our product.
This user manual is designed to support convenient usage of the navigation system and safe driving.
Please read the entire manual carefully before using the product.
The contents of this manual may vary depending on the navigation software version.
The user interface, functions and performance of the device and the contents of this manual are subject
to change without prior notice.
Please follow all safety guidelines listed in this manual for your safety.
Please comply with the following important instructions to ensure safe driving.
Warning Do not set or search for a destination while you are driving. Park your car at a safe place
before inputting addresses or searching for a destination.
Warning
Warning Voice guidance and map route can be different from actual road conditions.
Always be sure to comply with actual road signs/signals and local traffic regulations for safe driving.
It is very dangerous to operate the device, or to look at the screen while you are driving.
Always be fully aware of the surrounding traffic conditions and nearby pedestrians when you
are in your car.
1
ABOUT NAVIGATION SYSTEM..............
DIRECTIONS BEFORE USING THIS PRODUCT ............
COMPONENTS .................................................
SCOUT 355(B) FEATURE HIGHLIGHTS ................
FIRST THINGS FIRST..............................
SYSTEM TOUR ..................................................
PERIPHERALS TOUR ...........................................
SCOUT 355(B) SETUP ........................................
SCOUT 355(B) FUNDAMENTALS...........
HARDWARE INTERFACE ................................
COMMAND INTERFACE ....................................
MOBILE PHONE-SCOUT 355B ONLY.................
MULTIMEDIA MODE................................
MULTIMEDIA MODE OVERVIEW ........................
MP3 .................................................................
PHOTO .............................................................
2
SYSTEM CONFIGURATION..................................
SYSTEM SETTINGS OVERVIEW ..........................................
CUSTOMIZING USER PREFERENCES ..................................
SYSTEM MAINTENANCE AND USER SUPPORT......
USING YOUR SCOUT 355 SAFELY ...................................
CLEANING THE SCOUT 355 ............................................
TROUBLESHOOTING THE SCOUT 355 ..............................
FAQS ................................................................................
CUSTOMER SUPPORT .......................................................
SYSTEM SPECIFICATIONS...................................
HARDWARE FEATURES ......................................................
GPS SPECIFICATIONS ........................................................
SOFTWARE SPECIFICATIONS .............................................
DESIGN AND ERGONOMICS ............................................
ENVIRONMENTAL SPECIFICATIONS ..................................
REGULATORY INFORMATION ............................................
Table of Contents
Table of Contents
3
3
6
7
8
8
12
12
19
19
22
24
29
29
29
34
38
38
39
44
44
46
46
51
53
54
54
55
56
57
59
59
Directions before using this product
Please read through this section for important safety tips before using this product.
Usage directions
3
Warning Refrain from operating the device while the car is in motion. Please park the car at a safe
location before operating the device to minimize the danger of a traffic accident.
Voice guidance and map routes can be different from actual road conditions. Always be sure
to comply with actual road signs/signals and local traffic regulation for safe driving.
Warning Please do not modify the car in any way to install this device. Doing so may negatively affect
the safety devices on your vehicle.
Warning
Warning The manufacturer will not be liable for any accident or damages arising out of the use of this
product. The user will bear sole responsibility.
Warning
The suction cup mount may become dislodged from the windshield due to vibration, sudden
temperature changes, or unexpected shock, resulting in damage to the device or your car.
Please mount the device in a secure location (refer to the installation section for more details).
Caution Do not keep this product powered for a long time after stopping the engine. This can cause
the vehicle battery to drain.
About Navigation System
Directions before using this product
Installation directions
4
Caution
Only use the cables provided with the device. Always make sure that the device power is off
before connecting any external cables. Connecting external cables with the device powered
may cause damage to the device.
Caution Never attemp to disassemble the device yourself. Avoid applying shock to the device.
Caution Operate the touch screen with a round object or your fingertip. Using a sharp hard object may
damage the display.
Caution When cleaning the screen, turn off the power and use a soft clean dry cloth. Never use water
or chemical substance like detergent or solvent.
Caution
Please do not remove the SD card while data is being accessed from it. It will cause the device
to become unstable and freeze. This includes anytime the device is in the Audio player, the
Video player, the Image Viewer, or the navigation application. If the device freezes, turn off
the system and reboot.
Warning Please follow the instructions in the Installing Product section for connecting all wires and cables
to avoid malfunction.
Warning
Do not install the product in a location where driving can be impaired or where the
driver’s view of the road is blocked.
Warning Install the product in a position that does not interfere with the operation of vehicle safety devices
such as air bags.
About Navigation System
Directions before using this product
5
Caution Use only the cables provided with the product to ensure stable system operation.
Caution This product must be used with 5V power only.
Caution
Please remove the test jack that is installed in the safety terminal (check pages 6~7 for
location), and connect the hand brake cable. This cable needs to access the parking brake
signal going into the instrument panel of your vehicle. The access of this signal is different for
all automobiles. Please consult your vehicle user manual or contact your dealer service
technician for this location (check page 10 for further detail).
Caution Please power down the device before connecting any audio / video cables, otherwise the
product can be damaged.
Caution Do not install the product in a place with water, humidity, vapor, dust, oil, or smoke.
Caution
For the first time the device is taken out of the box, and any time the device hasn’t been used
for a long time, or after a cross country flight, it may take 5~10 minutes to obtain GPS
position.
Caution
Do not put any objects that may interfere with the GPS signal reception near the device. Most
problematic are any metallic objects that are located near the GPS antenna.
Caution
Do not install other electronic devices that generate heavy electromagnetic waves (such as radio
transmitters) near the GPS antenna.
Caution
GPS reception can be blocked if the car windshield is specially tinted.
About Navigation System
Directions before using this product
Components
6
Navigation System unit Installation DiscStylus Pen
Cradle Owner’s Guide DiscCircular Disc
Cigar Jack Quick Start GuideAC Adapter
About Navigation System
Components
★Specifications and design and contents are subject to change without notice.
Suction Cup Mount
Quick Start Guide
Map Disc
SCOUT 355(B) feature highlights
Powerful system
• Microsoft Windows CE .NET 4.2 operating system
• Samsung S3C2410 266 MHz application processor
• SiRF Star III GPS
• High-density rechargeable 2200 mAh Lithium Ion battery
Wide and accurate GPS coverage
• NAVTEQ digital map database
• Integrated patch antenna for optimum satellite pick up at every angle
Mobile design
• Compact and lightweight body makes it easy for users to carry it anywhere while driving or hiking
• Car mount kit for multi-vehicle usage (windshield or dashboard mounting)
• On-the-road recharging options via the car charger
Ergonomic features
• 3.5-inch 200-nit QVGA TMR LCD touch-sensitive screen
• Accessible control hot keys with backlight illumination
• Simple, easy-to-use user interface with large icons and command buttons
• Multi-language support for user interface
• Advanced power-saving options
Multimedia programs
• MP3for musical entertainment
• Photofor digital pictures
7
About Navigation System
SCOUT 355(B) feature highlights
This chapter describes the hardware interface of the SCOUT 355(B) and its peripherals. Instructions for setting up the
device and some basic system operations are also discussed.
System tour
This section describes operation of the device hardware interface.
Rear and front panels
8
First things first
NNoo..
1
IIccoonnCCoommppoonneenntt
Power status LED indicator
DDeessccrriippttiioonn
Indicates the battery power status.
• Green — The device is running on battery power.
• Orange — Battery charging
System tour
①②
⑩
⑨⑧ ⑦ ⑥ ⑤ ④ ③
⑪
NNoottee: For more information on how to use your SCOUT 355(B) in navigation mode, refer to the Destinator OP Quick
Start Guide or the Destinator OP User’s Guide (located in the Destinator OP CD).
NNoo..
2
3
4
5
6
7
8
9
10
11
IIccoonn
MMEENNUU
MMAAPP
++
--
CCoommppoonneenntt
Touch screen
Main Menu hot key
Navigation hot key
Zoom in hot key
Multi-directional joystick
Zoom out hot key
Volume up hot key
Volume down hot key
Microphone
Speaker
DDeessccrriippttiioonn
Displays the applications, data, and map images available
on your device. It is touch-sensitive and responds to finger
taps.
Displays the Main Menu panel; also called the Home panel.
Displays the Navigation panel.
When in navigation mode, zooms in on the center of a map.
When in full screen mode in Photo, zooms in on the
displayed image.
Move in a left-right or up-down direction to scroll through
displayed items.
Press to open (if it’s a file icon) or launch (if it is a program or
settings icon) a selected item.
When in navigation mode, zooms out from the center of a
map.
When in full screen mode in Photo, zooms out on the
displayed image.
Press to increase volume.
Press to decrease volume.
receives user’s sounds (this is valid in SCOUT 355B only).
Emits system sounds.
9
First things first
System tour
Right and left panels Top and bottom views
10
NNoo..
12
13
14
15
16
IIccoonnCCoommppoonneenntt
SD slot
Earphone jack
USB port
Power connector
Cradle interface
DDeessccrriippttiioonn
Accepts SD and MMC storage cards, allowing you to use audio,
image, and map files stored in it for use with internal
applications. You can also use it to back up data from your
device.
Connects to audio line-out devices (earphones/headphones).
USB port is not used in USA.
USB port is used special features for European functions.
Connects the device to an AC power outlet.
This connector must be used with 5V power only.
Interface for an external GPS aerial interface and AC adaptor.
First things first
System tour
⑱
⑫
⑰
⑬
⑭
⑮
⑯
Read and front cradles - Cradle only use in the car.
NNoo..
17
18
IIccoonnCCoommppoonneenntt
Power button/
backlight control
Soft reset button
DDeessccrriippttiioonn
AAss aa ppoowweerr bbuuttttoonn::
• If the device is off, press the button to turn it on. The power LED
indicator on the front panel lights up green.
• If the device is on, press the button to turn it off. The power LED
indicator also turns off.
AAss aa bbaacckklliigghhtt ccoonnttrrooll::
• Press and hold to activate or deactivate the screen backlight.
Press to perform a soft reset if the device freezes (i.e., device no longer
responds to the buttons on the screen).
11
First things first
System tour
NNoo..
19
20
21
IIccoonnCCoommppoonneenntt
System interface
External antenna
Power connector
DDeessccrriippttiioonn
Interface for system unit connection.
Interface for an external GPS aerial interface.
Power connector to an Cigar Jack only. This connector must be used with 5V power only.
⑲⑳
Peripherals tour/SCOUT 355(B) setup
Peripherals tour
This section describes of the peripherals bundled with the SCOUT 355(B).
Car charger
SCOUT 355(B) setup
Using the new SCOUT 355(B) is a snap. Unpack, mount, turn on, and it’s ready to go. Perform the following easy
installation tasks to start using the device straight out of the box:
1. Unpack the device.
2. Set up the device on a vehicle.
3. Turn on and configure the device.
Setup the SCOUT 355(B) on a vehicle
The SCOUT 355(B) comes with a car mount kit and a car charger with which you can set up the device on a vehicle.
Choose a position for the car mount kit on the windshield using the suction cup, or on the dashboard using the self-
adhesive power disc connector.
12
First things first
Some countries prohibit the mounting of any electronic device in any location on the vehicle dashboard. Be
sure to check your local laws for acceptable mounting areas before installing the car mount bracket.
Some newer vehicle models may have a heat reflective shield embedded in the windshield. This may in some
cases obstruct the GPS signal reception. If you encounter this problem in your vehicle, you need to purchase
an external GPS antenna.
CCaarr mmoouunntt iinnssttaallllaattiioonn rreemmiinnddeerrss
Install the car mount on the surface of a vehicle:
• That is smooth, flat and free of dirt and oil
• Where the driver can easily view/reach it without taking his/her eyes off too far from the road
• Where the device will not obscure car controls nor restrict the driver's view of the road
• Far from the air bag deployment area
TToo sseett uupp tthhee ddeevviiccee oonn aa vveehhiiccllee::
This section shows how to install the car mount kit in a vehicle’s windshield using the suction cup. For dashboard
installation procedures using the self-adhesive power disc connector refer to the SCOUT 355(B) Portable Navigator
Starter Guide.
1. Clean the mounting surface with a glass cleaner and a clean cotton cloth.
2. If the ambient temperature is below +15°C (60°F) warm the mounting area and the suction cup (e.g. with a hair
dryer) to ensure a strong suction bond.
3. Install the car mount on the selected area.
a. Fix the suction cup to the selected area with the locking lever facing up.
b. Flip the locking lever away from you to create a vacuum between the suction cup and the mounting surface.
13
First things first
SCOUT 355(B) setup
c. Make sure that the suction bond is strong enough before proceeding to the next step.
d. Insert the pegs on the car mount’s cradle plate to the holes on the back of the cradle, and then move the cradle
downwards until both parts are engaged.
4. Insert the Destinator OP SD card into the device.
5. Dock the device on the cradle.
6. AAddjjuusstt tthhee ccaarr mmoouunnttfor the best viewing angle.
7. After setting up the device on the car mount, connect the car charger.
If the car engine is turned off, you may be required to switch the vehicle ignition back into the Accessories
position. Consult your vehicle owner’s manual.
e. Connect the car charger to the power connector on the cradle.
f. Plug the other end of the car charger to your vehicle’s cigarette lighter.
g. The power LED indicator lights up orange during charging. The hot keys backlight is also lit up.
14
First things first
SCOUT 355(B) setup
The device comes with the battery pre-charged to at least 30% capacity. You can start using it once it is
mounted in your vehicle and connected to the cigarette lighter. However, for maximum usage time you need
to charge your device to full capacity. Go to the “RReecchhaarrggiinngg tthhee ddeevviiccee”section for instructions.
Start up the SCOUT 355(B)
After mounting the SCOUT 355(B) on a vehicle it is ready to be used. Turn it on to calibrate the screen. After screen
calibration, proceed to system settings configuration.
TToo ttuurrnn oonn aanndd ccaalliibbrraattee tthhee ddeevviiccee::
Turn on the device by pressing the power button on the top right panel of the device. The Main Menu panel
displays. This is also referred to as the Home panel.
15
First things first
SCOUT 355(B) setup
SCOUT 355 SCOUT 355B
TToo ccoonnffiigguurree ssyysstteemm sseettttiinnggss::
If you intend to start using SCOUT 355(B) at once, we recommend configuring the language and date/time settings
first. The rest of the user preferences can be set up later.
1. Tap On the MMaaiinn MMeennuupanel.
2. To set the system language settings, tap .
h. Tap / under the TTeexxttand VVooiicceesettings until the language ice is displayed.
i. Tap to apply the changes made.
16
First things first
SCOUT 355(B) setup
3. To set the system date and time, tap .
4. Tap Date.
j. Tap / under the YYeeaarr,, MMoonntthhand DDaayysettings to set the date values.
k. Tap to apply the changes made.
17
First things first
SCOUT 355(B) setup
5. Tap Time.
l. a. Tap / under the Hour and Minute settings to set the time values.
m. Tap to apply the changes made.
6. Tap Day/Night.
n. Check this box to enable automatic day/night backlight settings
o. / Set the day start and day end times
p. Tap to apply the changes mode.
For more information on the rest of the system configuration options, go to “SSyysstteemm ccoonnffiigguurraattiioonn”.
Congratulations! Your new SCOUT 355(B) is now ready for use. Proceed to “SSCCOOUUTT 335555((BB)) ffuunnddaammeennttaallss”for more
information on the device’s user interface to start using the device in navigation mode.
18
First things first
SCOUT 355(B) setup
This chapter describes basic hardware procedures in using the SCOUT 355(B). Information on the device’s command
interface is also discussed.
Hardware interface
UUssiinngg tthhee ttoouucchh ssccrreeeenn bbaacckklliigghhtt
Under some lighting conditions, viewing the information on the device maybe difficult. If this is the case use the
backlight to illuminate the touch screen.
TToo aaccttiivvaattee tthhee ttoouucchh ssccrreeeenn bbaacckklliigghhtt::
• Press and hold the power button until the backlight turns on.
TToo ttuurrnn ooffff tthhee ttoouucchh ssccrreeeenn bbaacckklliigghhtt::
• Press and hold the power button until the backlight turns off.
Using the SD slot
SCOUT 355(B) has an SD slot compatible with a range of SD storage card that you can use to back up or transfer
files and data.
Also, the SCOUT 355(B)’s GPS navigation system has its core on the Destinator OP program. Using this program
requires that users load the digital maps available in the Destinator OP SD card included with the device.
TToo iinnsseerrtt aa ssttoorraaggee ccaarrdd::
•Hold the device securely, and then push the card into the slot until you hear an audible system sound; this will
signal that the card is already properly seated within the slot. The card is secure when it is not protruding from
the slot.
19
SCOUT 355(B) fundamentals
Hardware interface
TToo rreemmoovvee aa ssttoorraaggee ccaarrdd::
1. Hold the device securely, and then push against the top of the card, as if you were pushing it further into the slot,
letting the card spring out. An audible system sound will signal that the card has been released.
2. Gently remove the card from the slot.
Recharging the SCOUT 355(B)
SCOUT 355(B) uses a high-density rechargeable 2200 mAh Lithium Ion battery. The status icon located on the top
right corner of the Main Menu panel indicates the level of the device’s battery power.
•- Battery full charged
•- Battery charging
•- Battery level low
•- Battery level very low, recharging required
•- Battery power depleted, device will automatically If the battery level becomes low in the course of normal
use, recharge the device. Normally, please use the AC adapter to recharge the SCOUT 355(B). However, this may
be difficult when there’s no available AC power outlet on hand. When the device battery is drained while on the
road, you can still recharge the device by using either the car charger cable or the USB cable. Recharging time
from empty to full capacity is about six (6) hours in all cases.
If the battery level reaches very low status, the device will automatically turn off. In this case, you have about
12 hours to recharge your device after which you risk losing all data on the device's internal memory. In
case all data is lost, the next time you power on the device you will be prompted to restore the data.
20
SCOUT 355(B) fundamentals
Hardware interface
TToo rreecchhaarrggee tthhee ddeevviiccee uussiinngg tthhee AACC aaddaapptteerr::
1. Plug the AC adapter into any AC current outlet.
2. Connect the AC adapter cord to the power connector on the left panel of the device.
The power LED indicator lights up orange during charging. The hot keys backlight is also lit up.
3.Once charging is complete, as indicated when the power LED indicator lights up green, disconnect the AC adapter
cord from the device.
TToo rreecchhaarrggee tthhee ddeevviiccee uussiinngg tthhee ccaarr cchhaarrggeerr::
Use the car charger to recharge the device while it is mounted on the vehicle. Perform step 7 of the “TToo sseett uupp tthhee
ddeevviiccee oonn yyoouurr vveehhiiccllee” section for instructions.
21
SCOUT 355(B) fundamentals
Hardware interface
Command interface
Using the hot keys
The hot keys on the SCOUT 355(B) allow users to:
• ++/-: Control the volume level of system sounds
• / : Control the magnification level of images
• MMAAPP: Launch the Navigation panel
• MMEENNUU: Launch the Main Menu panel
All six hot keys light up when pressed for easier operation under low light conditions.
The function of the hot keys may be disabled in some screens. For example, the magnification level hot keys
are inactive when viewing the MP3 directory.
UUssiinngg tthhee jjooyyssttiicckk
The multi-directional joystick controls actions and scroll through functions in the device, and at the same time act as
an Enter key when pressed.
The function of the joystick may be disabled in some screens. For example, the up/down direction is inactive
when in MP3 playback mode.
22
SCOUT 355(B) fundamentals
Command interface
Using the SCOUT 355(B) touch screen
The SCOUT 355(B) touch sensitive screen allows for a more natural way of entering information into the device using
fingers instead of a stylus - no more wasted time finding a lost stylus or fumbling with an awkwardly shaped one! In
this Guide, the tap and hold-and-drag actions are done by:
• TTaapp- Touch the screen once with your finger to open items and select options.
• HHoolldd aanndd ddrraagg- Tap a slider icon and drag it across the screen. In Photo’s Full Screen mode, hold and drag the
image to pan it in different directions.
• RReettuurrnn- Tap to apply any changes made and/or revert to the previous screen.
Using the Main menu panel
When the device turned on for the first time each day, you'll see the Main Menu panel, also called the Home panel.
From any other screen, you can
revert to it by pressing the Main Menu hot key MMEENNUU.
The panel’s title bar displays the current time (with 24-hour notation), the panel name, and the battery power level
status icon. Go to the “RReecchhaarrggiinngg tthhee ddeevviiccee”section for more information on this status icon.
23
SCOUT 355(B) fundamentals
Command interface
SCOUT 355 SCOUT 355B
There are five program icons on the Main Menu panel.
• - Tap to launch MP3 for music mode operation. Go to “ MMuullttiimmeeddiiaa mmooddee”for more information.
• - Tap to display the Navigation panel. Refer to the Destinator OP User’s Guide for more information on
how to use the device in navigation mode.
• - Tap to launch Photo for picture mode operation. Go to “MMuullttiimmeeddiiaa mmooddee”for more information.
• - Tap to open the System panel to configure the device’s user preferences. Go to “SSyysstteemm ccoonnffiigguurraattiioonn”
for more information.
• - Tap to launch Call for mobile phone mode operation. Go to “MMoobbiillee PPhhoonnee mmooddee”for more information.
This icon is valid in SCOUT 355B only.
Mobile Phone-SCOUT 355B only
This chapter contains information regarding the setup and use of the Bluetooth hands free feature with your Bluetooth
capable phone.
Mobile Phone Overview
• In order to interact successfully with the SCOUT 355B, your phone must be Bluetooth capable.
• Some Bluetooth capable phones do not support phonebook communication/interaction. For use with these
phones, the Phonebook, Caller ID, and Dialed menus on the SCOUT 355B will not be supported. Please check
your mobile phone user manual for description of your phone’s Bluetooth capabilities.
• To interface with the SCOUT 355B, your Bluetooth capable mobile phone must go through a Pairing process,
and a Connecting process.
24
SCOUT 355(B) fundamentals
Mobile Phone-SCOUT 355B only
• Once a phone has been paired with the SCOUT 355B unit, that phone will be registered with the unit, and
subsequent uses should only require a connecting process.
TToo ooppeenn MMoobbiillee PPhhoonnee::
Tap on the Main Menu panel.
The Mobile Phone initializing pad displays.
IInnssttrruuccttiioonnss ffoorr PPaaiirriinngg yyoouurr pphhoonnee wwiitthh tthhee SSCCOOUUTT 335555BB::
1. Press the Pairing button.
2. Bluetooth setting on your mobile phone
Turn on the Bluetooth feature on your mobile phone and set your phone to search for Bluetooth devices.
When ‘DVSK_Headset’is found, register the device with your phone (PIN number is 0000)
When Pairing is complete, you will see the following screen on the SCOUT 355B unit.
25
SCOUT 355(B) fundamentals
Mobile Phone-SCOUT 355B only
3. Press Connect.
If your phone has already been paired with the unit and is registered, you can press the connect button from the
main Mobile Phone initializing screen.
4. For some mobile phones, you may need to set your phone to connect to the ‘DVSK Headset’device. Otherwise, a
connection will be made automatically.
Once a connection has been established, you will see the following screen on the SCOUT 355B display.
TToo MMaakkee CCaallllss::
1. Call the most recent number in SCOUT 355B memory
Press the ‘Redial’button, and the last dialed number from the unit or the last call number received by the
unit (whichever is latest) will be dialed.
When you are finished with your call, press the button to end your call.
2. Input a number to dial
Press the ‘Number’button and you will be take to the number input window.
Input the number you would like to call, and press the button to dial.
26
SCOUT 355(B) fundamentals
Mobile Phone-SCOUT 355B only
3. Call a number located in the mobile phone phonebook.
To use this feature, your Bluetooth capable phone must support Phonebook data content download.
Press the ‘Phonebook’button, and a window will display the phonebook list that has been downloaded from
your mobile phone.
Select the desired listing and press the button to dial the number.
4. Call a number from the mobile phone recent dialed list
To use this feature, your Bluetooth capable phone must support Phonebook data content download.
Press the ‘Dialed’button, and a window will display the recent dialed list that has been downloaded from your
mobile phone.
Select the desired listing and press the button to dial the number.
5. Call a number from the mobile phone caller ID list
To use this feature, your Bluetooth capable phone must support Phonebook data content download.
Press the ‘Caller’button, and a window will display the caller ID list that has been downloaded from your mobile phone.
Select the desired listing and press the button to dial the number.
CChheecckkiinngg oonn tthhee ssttaattuuss ooff ccoonnnneeccttiioonn ttoo tthhee mmoobbiillee pphhoonnee::
1. Phone name
Please verify that your phone is correctly displayed in the Phone name window.
2. Connection Status
The Current Status display will show the current connection status with your mobile phone.
27
SCOUT 355(B) fundamentals
Mobile Phone-SCOUT 355B only
The status display can be refreshed by pressing the button.
TThhee rree--ccoonnnneecctt ttoo yyoouurr mmoobbiillee pphhoonnee::
Press the button to discontinue the current connection and to re-connect to the paired mobile phone.
Answering incoming calls
When you have an incoming call while your mobile phone is successfully connected with the SCOUT 355B unit, the
following window will pop-up.
To answer the call:
Press the button to answer the call using the hands-free feature of the SCOUT 355B unit.
To hang up the incoming call:
If you do not wish to take the incoming call, you can press the button to immediately hang up the phone.
28
SCOUT 355(B) fundamentals
Mobile Phone-SCOUT 355B only
This chapter describes the multimedia programs bundled with your SCOUT 355(B).
The device’s multimedia programs - MP3 and Photo - are not available in navigation mode. This is for
safety reasons so as not to distract the driver’s attention from the road.
Multimedia mode overview
In addition to its navigating function, the SCOUT 355(B) is also a mobile entertainment device that lets you enjoy the
digital music and image collection on the road. MP3 and Photo extend the device’s function to the multimedia scene.
To enable access of multimedia files from the device, it should be located on the SD card, not on the device s memory.
Do this either by:
• Using a compatible card reader to directly copy digital music and image files to the SD card.
It is advisable to organize files into subfolders. This will served as playlists and albums when you access the
files from your device.
MP3
Enjoy your favorite music on the road. The program features:
• Support for MP3, and WAV files
• Auto-scanning of supported files in the device’s SD card
• Separate volume control enabling you to adjust the playback sound level while retaining the volume level set for
system sounds
29
Multimedia mode
Multimedia mode overview/MP3
Multimedia mode
• Hot key function for volume control
• Playlist support based on sub-directory contents
Each sub-directory containing compatible music files is treated as an individual playlist. For a more organized file
search, it is advisable to named sub-directories based on genre or listening preferences. To illustrate, a sub-directory
containing music you listen to when traveling can be named “Journey favorites”; or “Top alternative”for a sub-
directory consisting of your favorite alternative songs.
• Shuffle and repeat playback functions
Using MP3
TToo ooppeenn MMPP33::
• Tap on the MMaaiinn MMeennuupanel. The MP3 playback pad displays.
30
Multimedia mode
MP3
TToo ooppeenn ffiilleess ffoorr ppllaayybbaacckk::
1. Tap OPEN.
The program will automatically scan the device SD card for supported digital files. Only sub-directories containing
compatible music files will be displayed.
2. Search for the file you want to play.
Tap / or use the joystick to scroll through all available files.
3. Tap a file or press the joystick to start playback of the selected file.
•When the file is located in the root directory, tap the file for playback.
•When the file is located inside a sub-directory, tap the sub-directory icon, then tap a file for playback.
Tap to return to the device’s root directory.
The selected file will automatically be played. Files in the same directory will also be played provided the Repeat
function is disabled.
31
Multimedia mode
MP3
TToo ccoonnttrrooll ffiillee ppllaayybbaacckk::
The icons in the playback pad let you control the playback mode.
• / - Tap to pause or resume playback.
• - Tap to stop playback.
• - Hold and drag the slider of the progress bar to adjust the progress of the current track.
• - Tap to skip backward to the previous track. If the current file is the first track in the list, the last track will
be played.
• Tap to skip forward to the next available track. If the current file is the last track in the list, the first track
will be played.
You can also move the joystick left/right to skip to the previous/next track. Pressing the joystick during file
playback will revert the screen to the Main Menu panel.
32
Multimedia mode
MP3
TToo rreeaarrrraannggee tthhee ppllaayybbaacckk sseeqquueennccee::
Each directory containing supported music files is considered a playlist. You can choose to shuffle the playback
sequence to play files in random order.
• To enable the Shuffle mode, tap .
An enabled Shuffle mode is indicated by the word ‘Random’on the playback display pad, and a fade-out Random icon.
• To disable the Shuffle mode, tap the fade-out button.
Tapping will automatically disable the Shuffle mode.
33
Multimedia mode
MP3
TToo eennaabbllee//ddiissaabbllee tthhee RReeppeeaatt mmooddee::
The Repeat mode lets you play the current track in a loop. The same track will be played over and over again until
you disable the Repeat mode.
• To enable the Repeat mode, tap .
An enabled Repeat mode is indicated by the word ‘Repeat’on the playback display pad, and a fade-out Repeat icon.
• To disable the Shuffle mode, tap the fade-out button.
Tapping will automatically disable the Repeat mode.
TToo ccoonnttrrooll tthhee ppllaayybbaacckk vvoolluummee::
To adjust the playback volume, you can use either the MP3 volume control slider or the volume control hot keys.
• This will only affect the volume of the track playback .
• Press the volume hot keys +/- will adjust the sound level for the device’s system sounds.
Photo
These days every mobile gaDestinator OPet seems to be equipped with a digital camera, better for capturing that
spontaneous moment. With SCOUT 355(B) you can keep these images of your favorite moments as mobile as you are
by using Photo. The program features:
• Support for JPEG and BMP (1-, 4-, 8-, and 24-bit) files
• Auto-scanning of supported files in the device’s SD card.
• Three viewing modes: Thumbnail, Full Screen, and Slide Show
• Album support based on sub-directory contents
34
Multimedia mode
Photo
Each sub-directory containing compatible image files is treated as an individual album. For a more organized file
search, it is advisable to sort image files into sub-directories based on something, such as a particular event or a
certain period. To illustrate, a sub-directory containing pictures from your daughter’s birthday can be named “Cassie’s
10th birthday”; or “May 11 to June 24 log”for a sub-directory consisting of pictures taken during that period.
Using Photo
TToo ooppeenn PPhhoottoo::
• Tap on the Main Menu panel.
The program will automatically scan the device’s SD card for supported image files. Image files will be displayed as
thumbnails; only sub-directories containing compatible files will be displayed.
Tap / or use the joystick to scroll through all available files. When a thumbnail is selected, a red border
appears around it.
35
Multimedia mode
Photo
Viewing files in Full Screen mode
In Full Screen mode, image files can be viewed in a larger or smaller scale. You can also change its orientation angle.
TToo ooppeenn iimmaaggee ffiilleess iinn FFuullll SSccrreeeenn mmooddee::
1. Search for the file you want to view.
Tap / or use the joystick to scroll through all available files.
Tap to return to the device’s root directory.
2. Open the file in full screen mode.
•When the file is located in the root directory, tap the file.
•When the file is located inside a sub-directory, tap the sub-directory icon, then tap the file you want to view.
TTaapp ttoo vviieeww ffiilleess iinn FFuullll SSccrreeeenn mmooddee
• Tap or move the joystick left/up to display the previous available image file.
• Tap or mve the joystick in a right/down direction to display the next available image file.
36
Multimedia mode
Photo
TToo cchhaannggee tthhee iimmaaggee mmaaggnniiffiiccaattiioonn lleevveell::
• Tap or press the Zoom In hot key ++to zoom into the center of the image.
When in a Zoom In state, you can hold and drag the image to pan it in any direction you want.
• Tap or press the Zoom Out hot key to zoom out the image display.
• To change the image orientation:
• Tap to rotate the images 90° clockwise.
TToo rreettuurrnn ttoo TThhuummbbnnaaiill mmooddee::
• Tap screen or press the joystick.
Viewing files in Slide Show mode
You have the option to view images in a slide show much like viewing a PowerPoint presentation in your computer.
Images are adjusted to fit the entire display area and are shown in a 3-second interval.
TToo eennaabbllee tthhee SSlliiddee SShhooww mmooddee::
• In Thumbnail mode, tap .
37
Multimedia mode
Photo
Tap the touch screen or press the joystick to stop the slide show and return to the previous viewing mode.
This chapter describes the ways you can customize the SCOUT 355(B) by setting user preferences.
System settings overview
You can adjust the settings of the device to suit the way. Adjusting certain settings, such as those for system volume,
power LED, and hot keys/ touch screen backlight may increase the standby time.
TToo aacccceessss tthhee SSyysstteemm ppaanneell::
• Tap on the Main Menu panel.
There are six preferences icon on this panel:
• - Tap to set the volume level for system sounds, enable tapping sound and the FMT.
• - Tap to view the battery power level and enable the hot keys backlight.
• - Tap to set the touch screen backlight level and enable its auto-off function.
• - Tap to change the system date, time, and time zone settings.
• - Tap to set the language option for the system menus and voice prompts.
• - Tap to displays your device’s model name and related technical specifications. Options for factory reset,
GPS reset, and screen recalibration are also shown.
38
System configuration
System settings overview
Customizing user preferences
Volume and FMT
TToo sseett tthhee ssyysstteemm ssoouunnddss vvoolluummee lleevveell::
1. Tap / to adjust the volume level.
2. Tap to apply the changes made.
TToo eennaabbllee ttaapp ssoouunnddss::
1. Tap the Enable sounds for taps check box.
2. Tap to apply the changes made.
TToo sseett tthhee FFMMTT ffrreeqquueennccyy::
1. Tap / to adjust the FMT frequency
2. Tap to apply the changes made.
When FMT is ON, the system speaker is muted.
In battery power mode, FMT does not operate.
39
System configuration
Customizing user preferences
Power
TToo eennaabbllee tthhee hhoott kkeeyyss bbaacckklliigghhtt::
1. Tap the Hot keys backlight on when pressed check box.
2.Tap / to set the hot keys backlight’s auto-off function. Options include backlight off after 5, 10, 15,
and 20 seconds.
3. Tap to apply the changes made.
TToo eennaabbllee tthhee hhoott kkeeyyss bbaacckklliigghhtt wwhheenn rruunnnniinngg oonn AACC ppoowweerr::
1. Tap the Hot keys backlight on when AC-in check box.
40
System configuration
Customizing user preferences
Tap Backlight
TToo sseett tthhee ssccrreeeenn bbaacckklliigghhtt lleevveell::
1. Tap / to adjust the screen backlight level.
2. Tap to apply the changes made.
TToo sseett tthhee ssccrreeeenn bbaacckklliigghhtt aauuttoo--ooffff ffuunnccttiioonn::
1. Tap / under the BBaatttteerryyand AACC PPoowweerrsettings.
Options include Never, backlight off after 10 or 15 seconds, and backlight off after 1, 2, or 3 minutes.
2. Tap to apply the changes made.
41
System configuration
Customizing user preferences
Date Time
Go to step 3 of the “TToo ccoonnffiigguurree ssyysstteemm sseettttiinnggss”section for instructions on how to set the system date and time.
Language
The SCOUT 355(B)’s user interface supports five pre-loaded languages: International English, French, German,
Italian, and Spanish. Additional language support is provided in navigation mode (i.e., when using Destinator
Destinator OP). This includes English, Italiano, Frangais, Castellano, Deutsch, Portuguese, Nederlands, Danish,
Swedish.
42
System configuration
Customizing user preferences
Go to step 2 of the “TToo ccoonnffiigguurree ssyysstteemm sseettttiinnggss”section for instructions on how to set the system language.
To load additional language options, refer to the Destinator OP User’s Guide.
When an additional language is installed and selected, it will only affect the Destinator OP user interface.
System menus and non-navigation screens ( MMPP33and PPhhoottoo) will default to English.
System Info
Go to the “TTrroouubblleesshhoooottiinngg yyoouurr SSCCOOUUTT 335555((BB))”section for instructions on how to use the three command buttons on
the System Info screen.
43
System configuration
Customizing user preferences
This chapter contains information regarding system usage, maintenance, and troubleshooting. Lists of frequently
asked questions (FAQs) and user support contact information are also provided for reference.
Using your SCOUT 355(B) safely
The precautions and instructions stated in this Guide shall be executed in the English language. In the event
of any discrepancy between the English language original hereof and any translation hereof into any other
language, the English language original shall govern.
Driving precautions
When using the device in a vehicle, the vehicle operator is solely responsible for operating the vehicle in a safe
manner. It is your responsibility to comply with all traffic laws. Failure to follow the directions below could result in
death or catastrophic bodily injury to you or to others.
• Do not attempt to enter information or configure the device while driving. If you need to do so, pull out of traffic
and come to a stop in a legally permissible and safe location before using your device.
• Vehicle operators must maintain full surveillance of pertinent driving conditions at all times. Minimize the need to
view the device screen while driving and use voice prompts to guide you.
• Never place the device on the passenger seat or any place else in the car where it can become a projectile
during a collision or stop.
• An air bag inflates with great force. DO NOT mount the device in the area over the air bag or in the air bag
deployment area.
• Although reasonable attempt has been made to ensure that the database in your SCOUT 355(B) is accurate, such
information may change from time to time. The SCOUT 355(B) database does not include any of the following:
Legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions)
Road slope, bridge height, weight or other limits
Construction work zones or hazards; road closures, traffic conditions
Weather conditions
44
System maintenance and user support
Using your SCOUT 355(B) safely
Emergency events
It is your responsibility to disregard any unsafe, hazardous or illegal route suggestions. Your judgment and common
sense shall take precedence over any information that may be received through the use of your device.
Operating precautions
DDeevviiccee uussaaggee pprreeccaauuttiioonnss
• Do not use your device anywhere it may be exposed to water or in conditions of high humidity.
• Do not expose the device to extreme temperatures, which could occur in a vehicle under direct sunlight. Such
exposure can shorten the life of the device, damage the plastic housing and/or battery, and increase the risk of explosion.
• Do not subject your device to sudden and severe temperature changes. This could result in moisture condensation
in the device that could cause damage to the device. In the event of moisture condensation, allow the device to
dry out completely.
• Do not leave the device unattended on an automobile dashboard. When your vehicle is parked and the device is
not in use, protect it from theft and extreme heat by storing it in an unobtrusive location, away from direct sunlight.
• The device is not a toy. Never allow children to play with the device.
• Never touch the liquid that might leak from a broken liquid crystal display. Contact with this liquid could cause a skin
rash. If the crystal display liquid should come into contact with the skin or clothing, wash it immediately with clean water.
• Never raise the sound volume level too high when using the device with earphones. An excessive sound volume
level could cause damage to your hearing.
CCaarr mmoouunntt pprreeccaauuttiioonnss
• Some countries prohibit the mounting of any electronic device in any location on the vehicle dashboard. Be sure
to check the local laws for applicable mounting before installing the car mount.
• Some newer vehicle models may have a heat reflective shield embedded in the windshield. This may in some
cases obstruct the GPS signal reception. If you encounter this problem in the vehicle, you need to purchase an
external GPS antenna.
45
System maintenance and user support
Using your SCOUT 355(B) safely
• The heating and cooling cycle of a vehicle's interior will in some cases loosen the adhesion of the suction cup. Check
the vacuum seal of the car mount for adequate adhesion each time you use the unit, and reinstall it if necessary.
• If the car mount has problems staying on, clean the plastic suction cup with alcohol, then reinstall. Moistening the
suction cup may help adhesion in some cases.
• To avoid extreme temperature from damaging the car mount, remove the unit if the temperature inside your
vehicle exceeds 70°C (160°F).
• The dip in humidity and temperature at night may loosen the adhesion of the suction cup. For this reason, as well
as for security, it is recommended that you remove both the car mount kit and the SCOUT 355(B) when leaving
your vehicle overnight.
SSttoorraaggee pprreeccaauuttiioonnss
• Do not store the device anywhere it may be exposed to water or in conditions of high humidity.
• When the device is not in use for an extended period of time, bring it indoors and store it in some location with a
temperature range of -20° to +70°C (-40° to 140°F) .
Cleaning the SCOUT 355(B)
• Use a damp soft dry cloth to wipe the device’s casing (not the display screen). Never use organic solvents such as
benzene or paint thinner to clean the device. Use of these solvents can cause deformation or discoloration.
• Use a soft, clean, lint-free cloth to clean the display screen. Moistened LCD screen wipes could also be used as required.
Troubleshooting the SCOUT 355(B)
Recalibrating the screen
If while using the device, you discover tapping an item doesn’t bring up the appropriate response, it means your
device has lost its calibration. Recalibrate the screen.
46
System maintenance and user support
Cleaning the SCOUT 355(B)/Troubleshooting the SCOUT 355(B)
TToo rreeccaalliibbrraattee tthhee ssccrreeeenn::
1. Tap on the MMaaiinn MMeennuupanel.
2. Tap on the SSyysstteemmpanel.
3. Tap Calibration on the SSyysstteemm IInnffooscreen.
4. Tap the center of the black cross as it moves around the screen.
5. Tap screen to apply the changes made.
47
System maintenance and user support
Troubleshooting the SCOUT 355(B)
Resetting the SCOUT 355(B)
You may have to perform a reset if the device freezes (i.e., device no longer responds to the buttons on the screen). A
soft reset allows your device to get a fresh start, similar to rebooting a computer. This will restart your device and
adjust memory allocation. All records and entries are retained after a soft reset. GPS settings are also retained.
TToo ppeerrffoorrmm aa ssoofftt rreesseett::
• Hold the device securely, and then press the soft reset button (1) on the bottom of the device.
48
System maintenance and user support
Troubleshooting the SCOUT 355(B)
Loading the factory default settings
If you still encounter system errors even after soft resetting the device, load the factory default settings to correct the
error. These default settings have been selected to optimize your device’s performance.
TToo llooaadd tthhee ffaaccttoorryy ddeeffaauulltt sseettttiinnggss::
1. Tap on the MMaaiinn MMeennuupanel.
2. Tap on the SSyysstteemmpanel.
3. Tap Factory Reset on the SSyysstteemmInfo screen.
4. Tap Yes on the dialog box.
5. After the factory reset, reconfigure your device’s user preferences.
49
System maintenance and user support
Troubleshooting the SCOUT 355(B)
Resetting the GPS function
In the following circumstances, the TTFF (Time To Fix First) values of your SCOUT 355(B) may be longer than usual.
• After a long period of inactivity
• If the current GPS fix position is more than 500 km, or more than apart 12 hours apart, from the previous position
This is due to the nature of the GPS algorithm and rotational velocitybetween the satellites and planet Earth, and is
deemed normal. To correct this, perform a GPS reset. This will update the GPS database, which contains information
about the GPS satellites that the unit needs to function in navigation mode.
TToo llooaadd tthhee ffaaccttoorryy ddeeffaauulltt sseettttiinnggss::
1. Tap on the MMaaiinn MMeennuupanel.
2. Tap on the SSyysstteemmpanel.
3. Tap GPS Reset on the SSyysstteemmInfo screen.
4. Tap Yes on the dialog box.
The GPS reset process will take about a minute to complete.
50
System maintenance and user support
Troubleshooting the SCOUT 355(B)
FAQs
This section lists frequently-asked questions that may arise during the use of your SCOUT 355(B), and gives easy
answers and solutions to these questions.
51
System maintenance and user support
FAQs
AAssppeecctt
Audio
Touch screen
Language setting
Multimedia mode
QQuueessttiioonn
Why is there no sound coming
from the device?
Why is the touch screen not
responding to my finger taps?
When I switched the language
setting to Dutch, why do I still get
an English Main Menu?
Why can’t I view my picture files?
Why can’t I play my music files or
view my pictures while navigating?
AAnnsswweerr
• If the earphone is plugged into the device, the speaker
is automatically shut off. Disconnect the earphone.
•Check that the device’s volume settings is not muted.
In the SSyysstteemmpanel, tap Volume.
The screen may have lost its calibration.
Recalibrate the screen. Go to the “RReeccaalliibbrraattiinngg tthhee
ssccrreeeenn“section for instructions.
If a user selects a language that is not one of the five
pre-loaded options (International English, French,
German, Italian, and Spanish), the new setting will only
affect the Destinator OP user interface. System menus
and non-navigation screens will default to English.
You may be trying to view an image that is not
supported by Photo. Go to the “PPhhoottoo“section for a list
of supported image formats.
The device’s multimedia programs - MP3 and Photo -
are not available in navigation mode. This is for safety
reasons so as not to distract the driver’s attention from
the road.
52
AAssppeecctt
Navigation mode
System information
and performance
Power
QQuueessttiioonn
Why is it that sometimes my device
takes longer than 5 minutes to get
a GPS fix?
How do I acquire a GPS fix within
standard time frame (about 1 GPS
minute in general)?
How do I check the OS version of
my device?
How do I restore the system back
to its default factory settings?
Does performing a factory reset
means a GPS reset as well?
What should I do if the system
stops functioning normally?
I couldn’t turn on the device.
AAnnsswweerr
If the previous GPS fix position was more than 500 km
or 12 hours apart from your current position and time,
it will take significantly longer than the standard TTFF
time to get a GPS fix. This is due to the nature of the
GPS algorithm and rotational velocity between the
satellites and planet Earth, and deemed normal and is
not the fault of your SCOUT 355(B) device.
Perform a GPS reset. Go to the “RReesseettttiinngg tthhee GGPPSS
ffuunnccttiioonn“section for instructions.
•Perform a soft reset on the device. Go to the
“RReesseettttiinngg tthhee SSCCOOUUTT 335555((BB))“ section for instructions.
The device’s OS version appears on the bottom left
corner of the screen.
•View the device’s OS version and other technical
specifications. In the System panel, tap Sys Info.
Users can perform this task by using the Factory Reset
button on the System Info screen. Go to the “LLooaaddiinngg
tthhee ffaaccttoorryy ddeeffaauulltt sseettttiinnggss“ section for instructions.
No. The Factory Reset function mainly reset the OS
settings to their default factory values; it will not cause
the GPS settings to reset.
Perform a soft reset on the device. Go to the “RReesseettttiinngg
tthhee SSCCOOUUTT 335555((BB))“section for instructions.
The battery power may be depleted. Recharge the device.
Go to the “RReecchhaarrggiinngg tthhee ddeevviiccee”section for instructions.
System maintenance and user support
FAQs
Customer support
Technical assistance
If you encounter a problem with your SCOUT 355(B), review the following first:
•“TTrroouubblleesshhoooottiinngg yyoouurr SSCCOOUUTT 335555((BB))”section
•“FFAAQQss”section
Product warranty
Refer to the SCOUT 355(B) Portable Navigator
Customer support and Product Inquiry
The product warranty period begins from the date of purchase. Please note your purchase date and
keep your sales receipt to ensure proper warranty service.
[Warranty service cannot be provided without a sales receipt clearly indicating the original purchase date from a
licensed Plenio retailer.]
CCuussttoommeerr SSeerrvviiccee CCeenntteerr
You can make an inquiries about the product through our call center or via email.
Please check the customer service website for troubleshooting tips before calling or emailing.
Also, please check and install the latest downloadable software patches from our website, and check back
periodically for product news and announcements.
TEL : 408 970 3387
FAX : 408 970 3390
EMAIL : cs.dvs@dvs.co.kr
CUSTOMER SERVICE HOME PAGE : www.dvssales.com/support
53
System maintenance and user support
Customer support
This chapter lists the features and operating specifications of the SCOUT 355(B).
Hardware features
54
System specifications
AAssppeecctt
Processor
GPS chipset
Memory
Power
Display
Audio
DDeessccrriippttiioonn
Samsung S3C2410 266 MHz application processor
SiRF Star III GPS
•64 MB SDRAM for system memory (for user applications and map storage)
•64 MB Flash ROM onboard flash memory (for operating system and embedded applications)
•High-density rechargeable 2200 mAh Lithium Ion battery
oUp to 3 straight hours of operation (backlight in 10% and GPS locked
o4.5 hours charging time from empty to full capacity via car charger or AC adapter
•Recharging options
oIndoors using the AC adapter
oOn-the-road using either the car charger or the USB cable
•Power status LED indicator
•3.5-inch screen for a wider viewing angle
•320 x 240 QVGA screen with 16.7M colors for a full-color display
•200-nit LCD provides higher brightness, high contrast, and low power consuming display
•TMR (Transmissive with Micro Reflective) technology allows the screen to display well-reproduced
images even under bright outdoors lighting.
•Hardware backlight control via the power button
•1W built-in speaker
•3.5 mm stereo earphone jack on the device
Hardware features
GPS specifications
55
System specifications
GPS specifications
AAssppeecctt
Connectivity
Hardware
command
interface
DDeessccrriippttiioonn
•SD slot
•Volume control hot keys
•Image magnification level hot keys
•Main Menu hot key
•Navigation hot key
•Multi-directional joystick
IItteemm
Chipset
Receiver
Antenna
Navigation
Software
Map database
DDeessccrriippttiioonn
SiRF Star III GPS
12 parallel channel
•Integrated patch antenna for optimum satellite pick up at every angle
•Optional connection for external antenna when the vehicle’s windshield has a heat reflective shield
Destinator OP features include:
•Destinator Address Manager
•Favourite destination hot list
•Destination history
•Navigation mode support for driving, hiking, and cycling activities
•Trip planner
NAVTEQ digital map database
Software specifications
56
IItteemm
TTFF (Time To Fix First, typical)
Accuracy of position fix (horizontal
position)
Velocity
Protocol
DDeessccrriippttiioonn
•Reacquisition: 1 sec. First, typical)
•Hot start: 8 sec.
•Warm start: 35 sec.
•Cold start: 55 sec.
10 m for 90%
0.1 m/s
NMEA-0183 v3.0 supporting the following commands:
•GGA •GSV
•GGL •RMC
•GSA •VTG
IItteemm
Operating system
Navigation software
Multimedia applications
DDeessccrriippttiioonn
Microsoft Windows CE .NET 4.2
Destinator OP
•MP3 - supports MP3, WMA, and WAV formats
•Photo - supports JPEG and BMP formats
System specifications
Software specifications
Design and ergonomics
57
System specifications
Design and ergonomics
AAssppeecctt
Compact and lightweight
User-friendly interface
DDeessccrriippttiioonn
•Dimensions (L x W x H): 97.6 x 113 x 50 mm (3.8 x 4.4 x 2.0 in)
•Weight: 300 g (10.6 oz)
•SCOUT 355(B)
oHot keys with dynamic backlight feature
oQuick launch hot keys for Main Menu and Navigation panels
oControl hot keys for volume and image magnification levels
oMulti-directional joystick
oTouch sensitive screen
•Car mount
oVersatile mounting options: windshield or dashboard positioning
oFirm grip suction cup provides a steady vibration-free support
oSwiveling mechanism and axial rod allows for multi-angle adjustment for optimum
viewing position
•Software
oMulti-language user interface options: International English, French, German,
Italian, and Spanish
oAdditional navigation mode language support: Danish, Dutch, Norwegian,
Portuguese, and Swedish.
oSystem configuration based on individual user preferences
58
AAssppeecctt
Power-saving options
Mobile design
Entertainment function
Bundled peripherals
Accessory options
DDeessccrriippttiioonn
•Auto-off function for touch screen backlight
•Auto-off function for hot keys backlight
•Suction-based car mount facilitates multi-vehicle usage
•Compact and lightweight body makes it easy for users to carry it anywhere
•On-the-road recharging options via the car charger and USB cable
•Simple, out-of-the-box operation: Mount, dock, and you’re on the go. No fussing with
screws and cables.
•Pre-loaded software for accessing digital music (
MMPP33
) and image files (
PPhhoottoo
)
•Car mount
•Cradle
•Car charger
•AC adaptor
•Protective carrying bag
System specifications
Design and ergonomics
Environmental specifications
Regulatory information
This device fully satisfies the requirements for CE marking when used in a residential, commercial or light industrial
environment.
59
System specifications
Environmental specifications/Regulatory information
AAssppeecctt
Temperature
Relative humidity (non-condensing)
DDeessccrriippttiioonn
Operating
Storage
Operating
Non-operating
0°to 45°
-10°to +60°C
20% to 90% RH
20% to 90% RH
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY
INTERFERENCE STATEMENT INFORMATION TO THE USER
NNOOTTEE
: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful Interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used un
accordance with the instructions, may cause harmful Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular Installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures :
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for assistance.
Change or modification not expressly approved by the party responsible for Compliance could void the user’s
authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
60
DECLARATION OF CONFORMITY
WE
Declare under our sole responsibility that the product :
Kind of equipment : Navigation System
Type-Designation :
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
Safety : EN 60950 : 1992 + A1, A2, A3, A4, A11
EMC : EN 55022 : 1998, EN 55024 : 1998
EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998
EN 61000-3-3 : 1995
following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC.
Accredited test laboratory :
TUV Rheinland
Am Grauen Stein
51105 Koln
KOREA / April. 27, 2006
--------------------------------- -------------------------------------------------------
(Place and date of issue) (Name and signature of authorized person)
61
CCOOMMPPAANNYY NNAAMMEE
DVS KOREA
497-3, Sangha-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Korea
62
MEMO
This device compiles with Part 15 of the FCC Results. Operation is subject to the following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try correct the interference by one or more of the following measures :
1.1 Reorient or relocate the receiving antenna.
1.2 Increase the separation between the equipment and receiver.
1.3 Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4 Consult the dealer or experienced radio/TV technician for help.
WARING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the
equipment.
CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation.
The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency
exposure limit. The minimum separation distance of 20cm from the antenna to the body of user required.
62
FCC Information
Please write your purchase date below, and save your sales receipt.
Both are needed for warranty repairs and customer service.