DVS Korea VXM2300 DVD Player with FM Transmitter User Manual Users manual 1

DVS Korea Co., Ltd. DVD Player with FM Transmitter Users manual 1

UserManual.wiki >

VXM2300 User Manual >

Contents

1. Users manual 1
2. Users manual 2

Users manual 1

PLAYBACK

2PrecautionPrecautionThe lighting flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of unisulateddangerous voltage within the product'senclosure that may be of sufficientmagnitude to constitute a risk of electricshock to persons. CAUTION: TO PREVENT THE RISK OFELECTRIC SHOCK DO NOT REMOVECOVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICEPERSONNEL.The exclamation point within anequilateral triangle is intended to alertthe user to the presence of importantoperating and maintenance(servicing instructions in the literatureaccompanying the appliance.TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.WARNINGCAUTION Use of controls or adjustments or performance ofprocedures other than those wpecified here in mayresult in hazardous radiation exposure.The use of Optical instruments with this product willincrease eye hazardCAUTIONThis product satisfies FCC regulations when shieldedcables and connectors are used to connect the unit toother equipment. To present electromagnetic interferencewith electric appliances such as radios and televisions,use shielded cables and connectors for connections.Note :This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful intrference in aresidential instailation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception,which can be determined by turing the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.CAUTIONThis product contains a laser diode of higher class than 1. To ensure continuedsafety, do not remove any covers or attempt Refer all servicing to qualifiedpersonnel.The following caution appears on rear of the unit.CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOIDDIRECT EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ONLASER COVERSHIELD)This product is in conformity with the EMC directiveand low-voltage directive.This product incorporates copyright protection technology that is protected by method claims of certain U. S .Patents and other intellectual propertyrights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be Authorized by MacrovisionCorporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision corporation. Reverse engineeringor disassembly is prohibited.Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories."DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.CAUTION: LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.VORSICHT: SICHTBARE UND UNSICHTBARELASERSTRAHLUNG. WENNABDECKUNG GE FFNET. NICHTDEM STRAHL AUSETZEN.ADVARSEL: LASERSTR LING VED ÃÃ BNING UNDGÃUDSÆ TTEL SE FOR STRÃLING.VARNING: LASERSTRÃL NING NÃR DENNA DEL ÃRÖPPNAD BETRAKTA EJ STRÃLEN.VARO!: AVATTAESSA ALTISTUT LASERSÃTBL YLLEÃLÃ KATSO SÃTEESENIMPORTANT

3Important Safety InstructionImportant Safety Instruction- READ INSTRUCTIONS - All the safety andoperating instructions should be read before theproduct is operated.- RETAIN INSTRUCTIONS - The safety andoperating instructions should be retained for futurereference.- HEED WARNINGS - All warnings on the productand in the operating instructions should beadhered to.- FOLLOW INSTRUCTIONS - All operating anduse instructions should be followed.- CLEANING - Unplug this product from the walloutlet before cleaning. The product should becleaned only with a polishing cloth or a soft drycloth. Never clean with furniture wax, benzenesecticides or other volatile liquids since they maycorrode the cabinet.- ATTACHMENTS - Do not use attachments notrecommended by the product manufacturer asthey may cause hazards.- WATER AND MOISTURE - Do not use thisproduct near water - for example, near a bathtub,wash bowl, kitchen sink, or laundry tub; in a wetbasement; or near a swimming pool; and the like.- ACCESSORIES - Do not place this product onan unstable cart, stand, tripod, bracket, or table.The product may fall, causing serious injury to achild or adult, and serious damage to the product.Use only with a cart, stand, tripod, bracket, or tablerecommended by the manufacturer, or sold withthe product. Any mounting of the product shouldfollow the manufacturer's instructions, and shoulduse a mounting accessory recommended by themanufacturer.- CART - A product and cartcombination should be movedwith care. Quick stops,excessive force, and unevensurfaces may cause theproduct and cart combination tooverturn.- VENTILATION - Slots and openings in thecabinet are provided for ventilation and to ensurereliable operation of the product and to protect itfrom overheating, and these openings must not beblocked or covered. The openings should never beblocked by placing the product on a bed, sofa, rug,or other similar surface. This product should not beplaced in a built-in installation such as a bookcaseor rack unless proper ventilation is provided or themanufacturer's instructions have been adhered to.- POWER SOURCES - This product should beoperated only from the type of power sourceindicated on the marking label. If you are not sureof the type of power supply to your home, consultyour product dealer or local power company.- LOCATION - he appliance should be installed ina stable location.- NONUSE PERIODS - The power cord of theappliance should be unplugged from the outletwhen left unused for a long period of time.- GROUNDING OR POLARIZATION-If this product is equipped with a polarizedalternating current line plug (a plug having oneblade wider than the other), it will fit into theoutlet only one way. This is a safety feature. Ifyou are unable to insert the plug fully into theoutlet, try reversing the plug. If the plug shouldstill fail to fit, contact your electrician to replaceyour obsolete outlet. Do not defeat the safetypurpose of the polarized plug.- If this product is equipped with a three-wiregrounding type plug, a plug having a third(grounding) pin, it will only fit into a groundingtype power outlet. This is a safety feature. If youare unable to insert the plug into the outlet,contact your electrician to replace your obsoleteoutlet. Do not defeat the safety purpose of thegrounding type plug.- POWER-CORD PROTECTION - Power-supplycords should be routed so that they are not likely tobe walked on or pinched by items placed upon oragainst them, paying particular attention to cordsat plugs, convenience receptacles, and the pointwhere they exit from the product.- OUTDOOR ANTENNA GROUNDING - If anoutside antenna or cable system is connected tothe product, be sure the antenna or cable systemis grounded so as to provide some protectionagainst voltage surges and built-up static charges.Article 810 of the National Electrical Code,ANSI/NFPA 70, provides information with regard toproper grounding of the mast and supportingstructure, grounding of the lead-in wire to anantenna discharge unit, size of groundingconductors, location of antenna-discharge unit,connection to grounding electrodes, andrequirements for the grounding electrode. SeeFigure A.- LIGHTNING - For added protection for thisproduct during a lightning storm, or when it is leftunattended and unused for long periods of time,unplug it from the wall outlet and disconnect theantenna or cable system. This will prevent damageto the product due to lightning and power-linesurges.- POWER LINES - An outside antenna systemshould not be located in the vicinity of overheadpower lines or other electric light or power circuits,or where it can fall into such power lines or circuits.When installing an outside antenna system,extreme care should be taken to keep fromtouching such power lines or circuits as contactwith them might be fatal.- OVERLOADING - Do not overload wall outlets,extension cords, or integral conveniencereceptacles as this can result in a risk of fire orelectric shock.- OBJECT AND LIQUID ENTRY - Never pushobjects of any kind into this product throughopenings as they may touch dangerous voltagepoints or short-out parts that could result in a fire orelectric shock. Never spill liquid of any kind on theproduct.- SERVICING - Do not attempt to service thisproduct yourself as opening or removing coversmay expose you to dangerous voltage or otherhazards. Refer all servicing to qualified servicepersonnel.- DAMAGE REQUIRING SERVICE - Unplug thisproduct from the wall outlet and refer servicing toqualified service personnel under the followingconditions:- When the power-supply cord or plug is damaged.- If liquid has been spilled, or objects have falleninto the product.- If the product has been exposed to rain or water.- If the product does not operate normally byfollowing the operating instructions. Adjust onlythose controls that are covered by the operatinginstructions as an improper adjustment of othercontrols may result in damage and will oftenrequire extensive work by a qualified technicianto restore the product to its normal operation.- If the product has been dropped or damaged inany way.- When the product exhibits a distinct change inperformance - this indicates a need for service.- REPLACEMENT PARTS - When replacementparts are required, be sure the service technicianhas used replacement parts specified by themanufacturer or have the same characteristics asthe original part. Unauthorized substitutions mayresult in fire, electric shock, or other hazards.- SAFETY CHECK - Upon completion of anyservice or repairs to this product, ask the servicetechnician to perform safety checks to determinethat the product is in proper operating condition.- WALL OR CEILING MOUNTING - The productshould not be mounted to a wall or ceiling.- HEAT - The product should be situated away fromheat sources such as radiators, heat registers,stoves, or other products (including amplifiers) thatproduce heat.Watch out for using Mobile DVD Player while driving(Watching TV while driving are prohibited)Warning

4Table of contentsTable of contentsFront PanelDisplayRear Panel Remote Control UnitWhat's in the boxPreparing the Remote ControlUsing the remote controlCompatible DiscsBefore You StartCaution on Handling Discs57789Power Connection Connecting to a TVConnecting to a Car Audio SystemConnecting External A/V InputConnecting to a Dolby DigitalConnecting to Car Radio SystemConnecting to Component Video InputGetting Started16171918202122Playing DVD Video discPlaying MP3 discsPlaying Kodak CD and JPEG file playFast Forward/BackwardSkip Forward/BackwardSlow Forward/BackwardFrame by Frame PlaybackBasic Operation23252627282728OSD (On-Screen Display)Selecting Audio LanguagesSelecting SubtitlesRepeating a Title, Chapter, TrackRepeating a specific section (A-B)Program Play Zooming a PictureSwitching the Camera AngleDirect Search (GO TO)Advanced Operation292930313131313332Basic OperationsGeneral SetupAudio SetupVideo SetupPreference SetupPassword SetupUsing the Setup Menu363739424144SpecificationsTroubleshootingAdditional Information454611121413Control & Display

Before You StartDiscHolding DiscsCleaning Discs5Cautions on handling discsOnly the discs including the mark shown on page 7 can be played on the DVD player. Note, however, that discs with special shapes(heart-shaped discs, hexagonal discs, irregular discs, etc.) cannot be played on the DVD player. Do not attempt to play such discs, as they may damage the player.Avoid touching the surface of discs when loading and unloading them.- Fingerprints or dirt on the may lower sound and picture quality or cause breaks in playback. Wipe off fingerprints or dirt- Use a commercially available disc cleaning set or a soft cloth to wipe off fingerprints or dirt.Be careful not to get fingerprints on the signal surface (the side which shines in rainbow colors.)Wipe gently from the middle outwards Do not wipe with a circular motion - Do not use record spray or antistatic. Also do not use volatile chemicals such as benzene or thinnerNoteBefore you Start

6Before You StartBefore You Start- Do not get fingerprints, grease or dirt on discs.- Be especially careful not to scratch discs when removing them from their cases.- Do not bend discs.- Do not heat discs.- Do not enlarge the center hole.- Do not write on the labeled (printed) side with a ball-point pen or pencil.- Water droplets may from on the surface if the disc is moved suddenly from a cold place to a warm one. Do not use hairdryer, etc., to dry the disc.Cautions on handling discs- Only load one disc at a time. Loading one disc on top of another may result in damage or scratch the discs.- Do not load cracked or warped discs or discs that have been fixed with adhesive, etc.- Do not use discs on which the adhesive part of cellophane tape or glue used to attach the label is exposed, or discs with traces of tape or labels that have been peeled, or discs with traces of tape or label that have been peeled off. Such discs may get stuck inside the player, resulting in damageCaution on Loading Discs

7Before You StartBefore You StartThank you for buying this product. Please confirm that the following accessories are in the box when you open it.Insert the batteries into the remote controler so you can use it to operate the DVD playerWarning : DC cable must be connected to ACC power lineOpen the battery cover.AccessoriesWhat's in the boxPreparing the Remote Control11Close the cover. 33Insert batteries. (AAA size)- Make sure to match the + and - on the batteries to the marks inside the battery compartment.22

Warning8Before You StartBefore You Start- Improper use of batteries may cause battery leakage and corrosion.- To operate the remote control correctly, follow the instructions.- Don't insert the batteries into the remote control in the wrong direction.- Don't charge, heat, open, or short-circuit the batteries.- Don't throw the batteries into fire.- Don't leave dead or exhausted batteries in the remote control.- Don't use different types of batteries together, or mix old and new batteries.- If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion.- If the remote control does not function correctly or if the operating range becomes reduced, replace all batteries with new ones.- If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries.- The batteries should last about one year with normal use.- Direct the remote control at the remote sensor of the DVD player.- Don't drop or give the remote control a shock.- Don't leave the remote control near extremely hot or humid place.- Don't spill water or put anything wet on the remote control.- Don't open the remote control.Using the remote controlThe effective operating range of the remote control is 5~7m, and 30 left and right degrees from the IR receiver.Note

9Before You StartBefore You StartThe types of discs listed on the table below can be used on the DVD player. The marks are indicated on the disc labels or jackets.- This unit can play DVD-R/ RW/ +R/ +RW discs recorded as DVD video format. - 12cm or 8cm discs.- Linear PCM digital audio- CD-Audio, CD-R and CD-RW formatted CDs are divided into tracks. (This unit can play CD-R and CD-RW discs recorded on CD Audio or Video CD format, or with MP3 audio files)- 12cm or 8cm discs.- MPEG-1 digital audio.- MPEG-1 digital video.- Video CDs are divided into tracks.- Picture 12cm discs- Single sided or double sided discs.- Single layer or dual layer discs.- Dolby Digital, DTS, MPEG or Linear PCM digital audio.- MPEG-2 digital video Discs are generally divided into one or more title. Titles may be further subdivided into chapters.Digital Video discsDVD-R, DVD-RW, DVD+R, DVD+RWDVD-R, DVD-RW, DVD+R, DVD+RWVideo CD Picture CDCompatible DiscsDVD+ReWritableDVD+R

10Before You StartBefore You Start- The CD-ROM must be ISO 9660 compatible.- Mono or stereo MPEG-1 Audio Layer 3 format, 32 or 44.1 or 48kHz fixed bit-rate. Incompatible files will not play.- Compatible with variable bit-rate (VBR) files. - This player is compatible with multi-session discs.- Audio encoded at 128Kbps should sound close to regular audio CD quality. Although this player will play 48K to 320k bit-rate.- MP3 tracks, the sound quality becomes. Noticeably worse at lower bit rates.MP3 compatibility informationYour DVD player is designed and manufactured to respond to the region management information that is recorded on a DVD disc. All DVD Video discs carry a region mark on the case somewhere that indicates which region of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will play in any player.Region code

Front Panel ControlPOWERTurns the power on/off.DISC IN / OUT HOLEDiscs are inserted and ejected here. EJECTPress EJECT to eject the discs.PLAY/PAUSEStarts disc play and pauseSKIP Forward/ReversePlays skip forward/reverse.REMOTE SENSORReceives a IR signal from the remote controlDISPLAY WINDOWDisplay information about the current state of the player and the disc. (See next page.)STEREO JACK FOR CAR PACK / AV INPlug in car pack jack for stereo audio output.Plug in video and stereo audio input.MUTETurns the audio outputs on/off.1 7892345611Control & DisplayControl & Display1 2 3 4568 7

12Control & DisplayControl & DisplayDisplayDVD/SVCD/MP3/PBCIlluminates the type of the disc loaded.ROTATIONRotates when the disc is spinning.PLAY/PAUSEIndicates the current operation mode.Repeat/ALLIndicates the current repeat play mode.DTSIndicates that the audio type of the disc under play is DTS.12354TIMEIndicates time information and displays information about operation such as PLAY, STOP, LOAD, NO DISC, etc.DolbyIndicates that the audio format of the disc under play is Dolby digital. 67

Rear PanelDC INPUTUse the cigar cable to connect the cigar jack.Use the AC adapter to connect the ACPower. (optional)EXTERNAL REMOTE CONNECTORUse the External Remote Control to Connect the IrmoduleDIGITAL AUDIO OUT (Coaxial)Use coaxial digital cable to connect to a compatible Dolby Digital receiverVIDEO OUTUse a video cable to connect one of these jacks to the Video input on your TV.DC INPUTUse the DC cable to connect the only 12V battery12345AUDIO OUT (L/R)Connect to the Audio input jacks of your TV, audio/video receiver6S-VIDEO OUTUse the S-VIDEO cable to connect this jack to the S-VIDEO.7VGA CONNECTOR (VGA option)Connect the VGA monitor to this connector. In VGA mode you can see progressive scan video.8COMPONENT VIDEO OUTConnect the component video input of TVsystem. It can out Y/Pb/Pr or RGB video output. At this video mode progressive scan is also possible.9ANTENNA CONNECTOR (Wireless FM Transmitter model)To connect antenna for internal wireless FM transmitter. It can out DVD player's audio signal to your car radio system. At this mode not necessary to connect any wiring for DVD player's audio signal10ANTENNA CABLE (Wired FM Transmitter model)To connect car radio's antenna and car radio antenna input for use wired FM transmitter. It can switching car antenna signal during DVD player's operation, so radio noise will decrease.1113Control & DisplayControl & Display1 4 5 6112 3 7109

14Control & DisplayControl & DisplayRemote ControlOPEN / CLOSE ( ) Ejects the disc1SETUP ( ) Use to set various functions according to individual preference2POWER ( ) Turns on or off the DVD player.3NUMBERPress the number button. Use the +10 button to input numbers of 10 or over. 4TITLE ( ) Use the TITLE button to display the title screen included on DVD discs.5MENU ( ) Use the MENU button to display the menu screen ncluded on a DVD discs.6RETURN ( ) Use the RETURN button to return to the previous menu screen.7MUTE ( ) Turns on/off audio outputs.8ARROW BUTTONS( ) Use to move to the desired menu.9CL(CLEAR) ( ) Press this to clear numbers that you have input.10ENTER ( )Selects menu items and begins disc play.11STOP ( ) Stop video playback in DVD video and video CD mode.12PLAY/PAUSE ( ) Play or pause video and audio media.13

STEP ( )14Play one frame at a time during pause.SKIP ( )15Select previous track, title, chapter, and index or beginning of current track, title, chapter, index. Select next track, title, chapter, index.DISPLAY ( )22Shows the information about time, play state.A-B ( )23Repeating a specific section.PROGRAM ( )24Programs the desired titles and tracks of DVD and CD-DA.ZOOM ( )25Press this to enlarge the image.TV MODE ( )26Changes the NTSC/PAL/MULTI /VGA (option) mode.PLAY MODE ( )27Repeats part or all of a chapter, title, track, or an entire discPBC ( )28Turn on and off the PBC function in video CD mode3D ( )29Virtual 3D Sound ControlAUX ( )30Changes the DVD mode and external A/V input modeAUDIO ONLY ( )31Turns off the screen for audio only modeDIMMER ( )32Set the display brightness (HALF, FULL, OFF).VOL+/VOL - ( )33Increases and decreases the volume.SEARCH ( )16Press for fast backward scanning during playback.Press for fast forward scanning during playback.SLOW MOTION ( ) 17Press for slow backward scanning during pause.Press for slow forward scanning during pauseGOTO ( )18Used to go to the chapter, track or song of the disc you wantSUB-T ( )19Changes the subtitle language to anotheravailable language or sets OFF (if the disc supports multiple subtitle languages).AUDIO ( )20Changes the audio language to another available language (if the disc supports multiple audio languages).ANGLE ( )21View with a different frame angle. (This button is available only on multiple angle DVDs.)15Control & DisplayControl & Display

16Getting StartedGetting StartedPower ConnectionsWhen using the Cigar cable- Make sure that input voltage is 12-24V- Connect to DC INPUT using the include cigar cable.To Cigar Jack11When connecting the DC power cable.- DC cable - This is installation should be made by a qualified service person and should confirm to all local codes.- Connect the terminal of red cable to DC 12-24V, and the terminal of black cable to ground. 22When using the DVD player at home - Connect to DC INPUT using the AC adapter.(optional) 33- When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.- Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected.- Fuse Replacement Marking - Replace only with same type (3 A, 250 V) and ratings of fuse. For continued protection against fire hazard.Note

Warning- Do not set the Digital Audio Output of this DVD player to "SPDIF/PCM" unless you are connecting the DIGITAL AUDIO jack of this DVD player to an AV decoder that has Dolby Digital decoding function. High volume sound may damage your hearing as well as speakers.Connecting to a TVVConnect the AUDIO CABLES between the AUDIO OUT L and R jacks on the back of your DVD player and the corresponding AUDIO INPUT jacks on your TV.L (White)Audio OutputAudio InputVideo InputR (Red)RLVideo Output (Yellow)S-Video OutputS-Video Input11Connect the VIDEO CABLE between the VIDEO OUT jack on the back of your DVD player and the corresponding VIDEO INPUT jack on your TV. (if you have S-VIDEO jack on your TV, connect to the S-VIDEO jack on your DVD player. You will watch a better picture.22Connect the DVD player to your TV.17Getting StartedGetting Started

18Getting StartedGetting StartedConnecting to a Car Audio SystemConnect the AUDIO CABLES between the AUDIO OUT L and R jacks on the back of your DVD player and the corresponding AUDIO INPUT jacks on your audio system.11Connect the VIDEO CABLE between the VIDEO OUT jack on the back of your DVD player and the corresponding VIDEO INPUT jack on your TV.22- When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the power source before making any connections.- If you place the DVD player near a turner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the tuner and radio.- Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.- Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on the speakers may be damaged.NoteConnecting to a Car Audio System.L (White)Audio OutputTVAudio InputVideo InputR (Red)RLVideo Output (Yellow)

19Getting StartedGetting StartedConnecting External A/V InputThis function can connects your another A/V (Game machine, MD...) to monitor and car audio system. Only connect A/V input cable to your DVD player's AUDIO OUT/AV IN socket than DVD player changes to external A/V input mode. If A/V has only audio signals cannot changes to external A/V input mode.You can change the mode by remote controller's AUX key.Caution : This function cannot operate in VGA mode (VGA option)11Connecting External A/V InputAudio OutputAudio InputExternal A/V Input CableVideo OutputVideo Input RRLLExternal AV playerGame machineMD playerCD player...

20Getting StartedGetting StartedConnecting to a Dolby Digital SystemDolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 6 channel receiver equipped with a Dolby Digital decoder or Dolby Digital processor.- When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.- Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be damaged.NoteDolby DigitalConnect the COAXIAL DIGITAL OUT (black) jack on the back of your DVD playerto the DIGITAL IN jack fo the Decoder or AV amplifier.112. Page 17-18 for details on video connection to TV22Video OutputS-Video OutputCoaxial CableCoaxial Digital InDolby Digital Decoder TVCenterSpeakerFrontSpeaker (R)FrontSpeaker (L) Sub WooferRear Speaker (Left surround) Rear Speaker (Right surround)Coaxial Digital Out

Navigation menu