DYE PRECISION 3026 Marker DAM User Manual 2013 DAM 1 MANUAL FCC 1008

DYE PRECISION, INC. Marker DAM 2013 DAM 1 MANUAL FCC 1008

Contents

user manual P1-20

WWW.DYEPAINTBALL.COMDAM™ OWNER’S MANUAL
WWW.DYEPAINTBALL.COM 1
WWW.DYEPAINTBALL.COM2WARNINGIMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
WWW.DYEPAINTBALL.COM 3WARNINGIMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
WWW.DYEPAINTBALL.COM4213
WWW.DYEPAINTBALL.COM 57645
WWW.DYEPAINTBALL.COM6WARNING: AFTER STEP 5, THE DAM™ WILL BE LIVE. BEFORE PROCEEDING, MAKE SURE THE BARREL SOCK IS IN PLACE AND DO NOT POINT THE DAM™ AT ANYTHING YOU DON’T INTEND TO SHOOT.
7
WWW.DYEPAINTBALL.COM81 2 3
WWW.DYEPAINTBALL.COMWhen servicing your marker:• Make sure a barrel sock is fitted to the DAM™.• Make sure your loader/magazine is removed from the DAM™.• Make sure there are no paintballs in the breech of the DAM™.• Always remove the first stage regulator and relieve all residual gas pressure from the DAM™ before disassembly.• The DAM™ can hold a small residual charge of gas, typically 2 shots, with the first stage regulator removed. Always discharge the marker in a safe direction to relieve this residual gas pressure.
WWW.DYEPAINTBALL.COM10FACTORY MODECUSTOM MODE(DEFAULT)
WWW.DYEPAINTBALL.COM 11CONFIGURABLE MODEBLOCKED CONFIGURATION MODE3
WWW.DYEPAINTBALL.COM12
WWW.DYEPAINTBALL.COM 13
WWW.DYEPAINTBALL.COM14• Be sure the trigger is not adjusted to the point where it is too sensitive and may cause accidental discharge of the marker.• Removing the trigger spring will cause premature wear on the microswitch, resulting in failure.21
WWW.DYEPAINTBALL.COM 153
WWW.DYEPAINTBALL.COM16

Navigation menu