DYE PRECISION 3026 Marker DAM User Manual 2013 DAM 1 MANUAL FCC 1008

DYE PRECISION, INC. Marker DAM 2013 DAM 1 MANUAL FCC 1008

Contents

user manual P1-20

WWW.DYEPAINTBALL.COM
DAM™ OWNER’S MANUAL
WWW.DYEPAINTBALL.COM 1
WWW.DYEPAINTBALL.COM
2
WARNING
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
WWW.DYEPAINTBALL.COM 3
WARNING
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
WWW.DYEPAINTBALL.COM
4
2
1
3
WWW.DYEPAINTBALL.COM 5
7
6
4
5
WWW.DYEPAINTBALL.COM
6
WARNING: AFTER STEP 5, THE DAM™ WILL BE LIVE. BEFORE
PROCEEDING, MAKE SURE THE BARREL SOCK IS IN PLACE AND DO
NOT POINT THE DAM™ AT ANYTHING YOU DON’T INTEND TO SHOOT.
7
WWW.DYEPAINTBALL.COM
8
1 2 3
WWW.DYEPAINTBALL.COM
When servicing your marker:
• Make sure a barrel sock is fitted to the DAM™.
• Make sure your loader/magazine is removed from the DAM™.
• Make sure there are no paintballs in the breech of the DAM™.
• Always remove the first stage regulator and relieve all residual gas
pressure from the DAM™ before disassembly.
• The DAM™ can hold a small residual charge of gas, typically 2
shots, with the first stage regulator removed. Always discharge the marker
in a safe direction to relieve this residual gas pressure.
WWW.DYEPAINTBALL.COM
10
FACTORY
MODE
CUSTOM
MODE
(DEFAULT)
WWW.DYEPAINTBALL.COM 11
CONFIGURABLE
MODE
BLOCKED
CONFIGURATION
MODE
3
WWW.DYEPAINTBALL.COM
12
WWW.DYEPAINTBALL.COM 13
WWW.DYEPAINTBALL.COM
14
• Be sure the trigger is not adjusted to the point where it is too
sensitive and may cause accidental discharge of the marker.
• Removing the trigger spring will cause premature wear on the
microswitch, resulting in failure.
2
1
WWW.DYEPAINTBALL.COM 15
3
WWW.DYEPAINTBALL.COM
16

Navigation menu