Download: Mirror Download [FCC.gov] Document ID 3747080 Application ID XCNBFiFJUV2+D3QXbBwAOA== Document Description User Manual Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 155.36kB (1942008 bits) Date Submitted 2018-02-08 00:00:00 Date Available 2018-02-08 00:00:00 Creation Date 2018-02-08 13:56:46 Producing Software Acrobat Distiller 9.5.5 (Windows) Document Lastmod 2018-02-08 13:56:46 Document Title iLX-F309 Document Creator FrameMaker 10.0 Document Author: ALPINE Corporation
HALO9 9-INCH AUDIO/VIDEO RECEIVER
iLX-F309
EN
FR
ES
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by
registering your product now at the following address: www.alpine-usa.com/registration.
You will be informed of product and software updates (if applicable), special promotions, news
about Alpine.
Merci d’avoir acheté ce produit Alpine. Nous vous invitons à consacrer un moment à la protection
de votre achat en enregistrant votre produit dès maintenant à l’adresse suivante :
www.alpine-usa.com/registration.
Vous serez tenu informé des mises à jour des produits et des logiciels (le cas échéant), des
promotions spéciales et de l’actualité d’Alpine.
Gracias por adquirir este producto Alpine. Con solo unos pocos pasos podrá proteger su producto,
registrándolo a través de la siguiente dirección: www.alpine-usa.com/registration.
Recibirá información sobre nuevos productos y software, promociones especiales y novedades
sobre Alpine.
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
Designed by ALPINE Japan
68-34732Z74-A
ENGLISH
Contents
Favorite Function
Using the Favorite Function .............................. 21
Operating Instructions
PRECAUTIONS
IMPORTANT INFORMATION ........................ 7
WARNING
Points to Observe for Safe Usage ........................ 7
WARNING ...................................................... 7
CAUTION ....................................................... 9
NOTICE .......................................................... 9
Features
Favorite Function ................................................ 11
About Swiping the Touch Screen ...................... 11
Switching the Audio Sources Screen to a
Dedicated Screen ............................................. 12
Getting Started
Location of Controls ........................................... 13
Turning Power On or Off .................................. 13
Turning the System On ...................................... 13
Initial System Start-Up ....................................... 14
Adjusting the Volume ......................................... 14
Lowering Volume Quickly ................................. 14
Touch Screen Operation .................................... 14
Switching Sources ................................................ 15
Operating the Function Button on the Audio/
Video Main Screen .......................................... 15
About Basic Operation for List Screen ............. 16
About the Shortcut Setup Screen ...................... 16
Sound Setup Function ..................................... 17
About the Menu Screen ...................................... 18
Edit Menu ......................................................... 18
About the Indicator Display .............................. 19
Opening screen Customization ......................... 19
How to Input Characters and Numbers
(Keypad) ........................................................... 20
Editing the Favorite Screen ................................ 21
Registering Items ............................................. 21
Changing Item Names .................................... 22
Changing Icons (only the Shortcut Dialing
icons) ............................................................. 22
Changing the Layout ....................................... 22
Deleting Items .................................................. 23
Applying Alpine TuneIt App
Adjusting the sound via the Smartphone ........ 24
Facebook Notification Function ....................... 24
Setup
Setup Operation .................................................. 26
Wireless (Bluetooth) Setup
Bluetooth Setup ................................................... 27
Displaying Bluetooth Information ................ 27
Pairing a Bluetooth Device ............................. 27
Hands-free Device Primary/Secondary
Setting ............................................................ 28
iPhone Auto Pairing Setting .......................... 28
Device Setup ......................................................... 28
Setting the Passcode ........................................ 28
Changing the Character Code of the Phone
Book ............................................................... 29
Selecting the Output Speaker ......................... 29
General Setup
Sound Setup ......................................................... 30
Setting the Balance/Fader/Rear Speaker/
Subwoofer ..................................................... 30
Setting the Media Xpander (MX HD) .......... 31
Equalizer Presets .............................................. 31
Adjusting the Parametric Equalizer Curve
(Dual HD EQ) .............................................. 31
Adjusting the Crossover Settings
(X-Over) ........................................................ 32
Adjusting the Time Correction (TCR) ......... 33
Setting Defeat ................................................... 33
Setting the Volume for Each Source ............. 33
Adjusting the Caller Level .............................. 33
Adjusting the Microphone Level ................... 33
Adjusting the Ring Tone Level ...................... 34
Volume Setting ................................................ 34
Setting the Microphone Effect ....................... 34
3-EN
Default Sound Settings ................................... 34
About the Crossover ........................................... 34
About Time Correction ...................................... 35
Language Setting ................................................. 36
Picture Quality Setup .......................................... 36
Selecting the Visual EQ Mode
(Factory’s setting) ........................................ 36
Adjusting Brightness ....................................... 36
Adjusting Color of Picture ............................. 36
Adjusting Tint of Picture ............................... 36
Adjusting Image Contrast .............................. 36
Adjusting Picture Quality .............................. 36
Saving and calling the adjusted picture
quality ............................................................ 36
Display/Key Setup ............................................... 37
Screen/Lighting Customize ............................ 37
Switching the Display Color .......................... 37
Setting the Text Scroll ..................................... 37
Switching the Artwork Position .................... 37
General Setup ....................................................... 38
Format settings ................................................ 38
Setting the Clock Display ............................... 38
Setting the Time ............................................... 38
Setting Daylight Saving Time ........................ 38
About iLX-F309 ............................................... 38
Setting Demo mode to Off/On ...................... 38
Vehicle Setup ....................................................... 39
Steering wheel Setting ..................................... 39
Installation Setup ............................................. 39
Source Setup
Radio Setup .......................................................... 40
Setting the TUNER (FM) Tone Quality
(Tuner Condition) ....................................... 40
Setting the TUNER (FM) Frequency Step ... 40
SiriusXM Setup .................................................... 40
Setting the Alert individually for an Artist/
Song/Favorite Team .................................... 40
Setting ON/OFF of all Songs/Artists/Games
Alert ............................................................... 40
Deleting all stored Alert .................................. 40
Setting the Favorite Sports Team Alerts ...... 41
Setting the Parental Lock ................................ 41
Signal Strength Information .......................... 41
AUX Setup ........................................................... 42
Setting the Auxiliary (AUX) Name ............... 42
Switching the Visual Input Signal System ... 42
HDMI Setup ........................................................ 42
Setting the Bluetooth Pandora® ......................... 42
4-EN
System Setup
Camera Setup ....................................................... 43
Setting the Camera Input ............................... 43
Setting the Camera Signal Input ................... 43
Adjusting the Rear Camera Guide ................ 43
Camera Interrupt Setting (Power OFF
Mode) ............................................................ 44
Factory System Setup .......................................... 44
Setting the Source Category ........................... 45
Setting the Default Vehicle Screen ................ 45
Setting the Maestro Module ........................... 45
External Accessories Setup ................................ 45
Setting the External Audio Processor ........... 45
Setting the External Accessory Control ....... 45
Smartphone Apps Setup ..................................... 46
Apple CarPlay (Optional)
Access to Apple CarPlay .................................... 47
Android Auto (Optional)
What is Android Auto ........................................ 47
Activate Android Auto ....................................... 47
Radio/HD Radio™/RBDS
Radio Basic Operation
Listening to the Radio ........................................ 49
Presetting Stations Manually ............................. 49
Presetting Stations Automatically ..................... 49
Tuning to Preset Stations ................................... 49
Inputting Frequency Directly and Receiving
the Radio Station ............................................. 50
Receiving a Multicast (HD Radio™ Mode
only) .................................................................. 50
Selecting the Receivable Program Type (RBDS
FM Radio mode only) ..................................... 50
Forced Analog Mode .......................................... 50
Displaying Radio Text (RBDS FM Radio mode
only) .................................................................. 50
Using Ballgame Mode (HD Radio™ Mode
only) .................................................................. 51
About the Feature Logos .................................... 51
USB Flash drive (Optional)
Playback ................................................................ 53
Fast-forwarding/Fast-reversing (USB Video
only) .................................................................. 53
Selecting the Channel Directly .......................... 64
Stopping Playback (USB Video only) .............. 53
Receiving and Tuning to an Alert ..................... 64
Repeat Play ........................................................... 53
Replay Function .................................................. 65
Random Play (USB Audio only) ....................... 53
Parental Lock Function ...................................... 65
Searching for a Desired Song ............................. 53
Using Jump Memory and Jump Recall
function ............................................................. 65
Switching Display Modes (During Video File
Play Back) ......................................................... 54
About USB Video format ................................... 54
iPod/iPhone (Optional)
Playback ................................................................ 56
Searching for a Music File .................................. 56
Quick Search Mode ......................................... 56
Full Search Mode ............................................. 56
Alphabet Search Function ................................. 57
Repeat Play ........................................................... 57
Random Play (Shuffle) ....................................... 57
Storing the desired Song/Artist ......................... 64
HDMI Device (Optional)
DVD Player Operation
HDMI Operation
Bluetooth Operation
Setup Before Using .............................................. 67
About Bluetooth .............................................. 67
About the Hands-free Phone ......................... 67
Before Using Bluetooth .................................. 67
Hands-free Phone Control
Pandora® internet radio (optional)
Listening to Pandora® ......................................... 58
“Thumbs” Feedback ........................................... 59
Searching for a Desired Station ......................... 59
QuickMix ............................................................. 59
Creating a New Station ....................................... 59
Bookmarking a Desired Track or Artist .......... 59
Connecting a Bluetooth Device (Bluetooth
Pandora® Only) ................................................ 60
Disconnecting the Bluetooth Connection ... 60
Changing the connecting Bluetooth
Device ............................................................ 60
SiriusXM Satellite Radio Operation
(Optional)
Receiving Channels with the SiriusXM
Tuner ................................................................. 62
Tuning Channels by Category ........................... 62
Changing the Display ......................................... 62
Checking the SiriusXM Radio ID Number ..... 62
Storing Channel Presets ..................................... 62
Tuning Channels using Presets ......................... 62
SmartFavorites Functions .................................. 63
TuneStart™ Function ....................................... 63
TuneScan™ Function ....................................... 63
Search Function ................................................... 63
Answering a Call ................................................. 68
Hanging up the Telephone ................................ 68
Call Waiting Function ........................................ 68
Calling ................................................................... 69
Calling by Favorite Function ......................... 69
Making a phone call using the Phone
Menu ............................................................. 69
Using Voice Recognition function ................... 70
Using Siri .......................................................... 70
Voice Dial Function ........................................ 70
Operations During a Conversation .................. 71
Adjusting the Speech Volume ....................... 71
Changing the Voice Output ........................... 71
DTMF (Touch-Tone) Function .................... 71
Phone Book Function ......................................... 71
Synchronizing the Phone Book ..................... 71
Adding the Phone Book ................................. 71
Deleting the Phone Book Entries .................. 72
Searching in the Phone Book ......................... 72
Bluetooth Audio
Playback ................................................................ 73
Repeat Play ........................................................... 73
Random Play ........................................................ 73
Search Function ................................................... 73
Connecting a Bluetooth Device ........................ 74
Disconnecting the Bluetooth Connection ... 74
5-EN
Changing the connecting Bluetooth
Device ............................................................ 74
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) .......... 75
Operating an AUX, AUX DVD or
GAME ........................................................... 75
Camera Operation (Optional)
Rear Camera Operation ..................................... 76
Displaying the Rear Camera Image from the
Menu screen ................................................. 76
Displaying the rear view video while the car
is in reverse ................................................... 76
Guide Display ON/OFF Setting .................... 76
Adjusting the Caution Display Location ...... 76
About the Rear Camera Guide .......................... 76
iDataLink Operation
Access to iDataLink Mode ................................. 78
About Parking Sensor screen ......................... 79
External Accessory Control Operation ............ 80
Information
Product Software Update ................................... 81
About the Supported Formats ........................... 81
About MP3/WMA/AAC/FLAC .................... 81
In Case of Difficulty ............................................ 83
If this Message Appears ...................................... 84
Specifications ....................................................... 85
LIMITED WARRANTY
6-EN
Operating Instructions
PRECAUTIONS
WARNING
Points to Observe for Safe Usage
• Read this manual carefully before using this disc and the system
components. They contain instructions on how to use this product
in a safe and effective manner. Alpine cannot be responsible for
problems resulting from failure to observe the instructions in this
manual.
• This manual uses various pictorial displays to show you how to use
this product safely and to alert you to potential dangers resulting
from improper connections and operation. Following are the
meanings of these pictorial displays. It is important to fully
understand the meanings of these pictorial displays in order to use
this manual and the system properly.
• This product may be used with software applications. Please follow
all usage instructions and warnings when using this product at all
times. Do not use this product or any software application in a
manner which will hinder safe operation of your vehicle.
• This product may be used in conjunction with the Alpine KAC-001
External Accessory Control module, which works with various
accessory products manufactured by third parties. Please review
and follow all manufacturer's instructions and warnings for all
accessory products.
WARNING
• Operation of the system while driving is dangerous. Users
should stop vehicle before operating the software.
• Road conditions and regulations take precedence over
information contained on the map display: observe actual
traffic restrictions and circumstances while driving.
• This software is designed for use exclusively in the unit. It
cannot and may not be used in conjunction with other
hardware.
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH
TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY
BRAKE IS APPLIED.
It is dangerous for the driver to watch TV/Video while driving a
vehicle. Installing this product incorrectly enables the driver to
watch TV/Video while driving. This may cause a distraction,
preventing the driver from looking ahead, thus causing an accident.
The driver or other people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
DO NOT FOLLOW ROUTE SUGGESTIONS IF THE NAVIGATION SYSTEM
INSTRUCTS YOU TO PERFORM AN UNSAFE OR ILLEGAL MANEUVER, OR
PLACES YOU IN AN UNSAFE SITUATION OR AREA.
This product is not a substitute for your personal judgement. Any
route suggestions by this system should never supersede any local
traffic regulations or your personal judgement or knowledge of safe
driving practice.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
7-EN
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY
TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING
OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
8-EN
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
NOTICE
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Temperature
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
Maintenance
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service Station
for servicing.
Protecting the USB connector
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
• Only an iPod/iPhone or USB flash drive can be connected to the
USB connector on this unit. Correct performance using other
USB products cannot be guaranteed.
• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.
• Depending on the connected USB flash drive, the unit may not
function or some functions may not be performed.
• The audio file format that can be played back on the unit is
MP3/WMA/AAC/FLAC.
• Artist/song name, etc., can be displayed. Certain, special
characters may not be correctly displayed.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
9-EN
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc., is
lost while using this product.
On Handling USB Flash drive
• This unit can control a memory storage device that supports the
USB Mass Storage Class (MSC) protocol. Playable audio file
formats are MP3, WMA, AAC and FLAC.
• USB Flash drive function is not guaranteed. Use USB flash drive
according to the terms of agreement. Read the USB flash drive
Owner’s Manual thoroughly.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
• Fix the USB flash drive in a location where driver operation will
not be hindered.
• USB Flash drive may not function correctly at high or low
temperature.
• Use only certified USB flash drive. Note that even certified USB
flash drive, may not function correctly depending on its type or
state.
• Depending on the settings of the USB flash drive type, memory
state or encoding software, the unit may not play back or display
properly.
• USB Flash drive may take time to start playback. If there is a
particular file other than audio in the USB flash drive, it may take
considerable time before the file is played back or searched.
• The unit can play back “mp3,” “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognized. The resulting
playback may contain noise that can damage speakers and/or
amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
10-EN
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, iPhone, iPod, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries. Apple CarPlay is a
trademark of Apple Inc.
• “Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to
meet Apple performance standards.
• Use of the Apple CarPlay logo means that a vehicle user interface
meets Apple performance standards. Apple is not responsible for
the operation of this vehicle or its compliance with safety and
regulatory standards. Please note that the use of this product
with iPhone, or iPod may affect wireless performance.
• Pandora, the Pandora logo, and the Pandora trade dress are
trademarks or registered trademarks of Pandora Media, Inc.,
used with permission. Pandora is currently available in the U.S.,
Australia and New Zealand.
• HD Radio Technology manufactured under license from iBiquity
Digital Corporation. U.S. and Foreign Patents. For patents see
http://patents.dts.com/. HD Radio and the HD, HD Radio, and
“ARC” logos are registered trademarks or trademarks of iBiquity
Digital Corporation in the United States and/or other countries.
• Sirius, XM and all related marks and logos are trademarks of
Sirius XM Radio Inc. All rights reserved.
• Google, Android, Android Auto, Google Play and other marks
are trademarks of Google LLC.
• The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by
Alpine Electronics, Inc. is under license.
• The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson. Supply of this product only
conveys a license for private,non-commercial use and does not
convey a license nor imply any right to use this product in any
commercial (i.e. revenue-generation) real time broadcasting
(terrestrial, satellite, cable and/or any other media),
broadcasting/streaming via internet, intranets and/or other
networks or in other electronic content distribution systems,
such as pay-audio or audio-on-demand applications. An
independent license for such use is required. For details, please
visit
http://www.mp3licensing.com
Features
The screen design used in the Owner’s Manual may differ from the actual screen.
Favorite Function
Frequently used functions can be easily recalled. For details, see “Favorite Function” (page 21).
Favorite screen example
• Frequently used functions and useful functions can be customized for your convenience.
• You can register up to 54 functions.
• You cannot register a function more than once.
About Swiping the Touch Screen
You can change a screen or a page by swiping the touch screen vertically or horizontally with your finger. For details, see “Touch Screen Operation”
(page 14).
Swipe the display with your finger lightly.
11-EN
Switching the Audio Sources Screen to a Dedicated Screen
You can switch the Audio Sources screen to a dedicated screen by touching the icon on one of the three edges of the screen, or by swiping vertically or
horizontally. For details on how to swipe the screen, see “Touch Screen Operation” (page 14).
• The operation is not available when using Apple CarPlay.
Shortcut Setup Screen (page 16)
You can set the Sound Setup System.
(USB Audio)
Preset button or Quick Search mode Screen *1
Menu Screen *2 (page 18)
You can make settings on the Menu Screen.
*1 The Search mode differs depending on the audio source. For details, see the operating instructions of the audio source.
*2 The screen also switches by pressing the
(MENU) button.
12-EN
Getting Started
Location of Controls
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example, if
the unit is in radio mode when ignition is turned off, it will remain
in radio mode when ignition is turned back on.
Press and hold the
(MENU)/(Power Off) button for at
least 5 seconds to turn the power off.
• The unit can be turned on by pressing any button.
• The unit is a precision device. Careful handling of the unit should
provide you with years of trouble-free operation.
Turning the System On
RESET switch
The system of this unit is reset.
(DOWN/UP) button
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 23
languages.
Press to adjust the volume.
(MUTE) button
Press to activate/deactivate the mute mode.
button
Depending on the connected smartphone, press to recall Siri
function or voice recognition mode.
(MENU)/(Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn the
power off.
(Favorite) button
Recalls the Favorite screen.
• Press and hold this button for at least 2 seconds to switch to
the iDataLink mode screen. (When connected to the optional
iDataLink module.)
After selecting the language, the time setting screen is displayed.
Touch [ ] or [ ] of “Hour”, “Minute” to adjust the time, then
touch [OK] to confirm.
Touch [Reset] to reset the time.
• The GPS antenna should be connected before adjusting the time.
• Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake before attempting these operations.
button
Press to seek down/up a station in radio mode or down/up a
track, chapter, etc., in other audio/visual sources.
Dimmer Sensor
Sense the brightness of the car interior.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in bold
(e.g.
(MENU)). The buttons found on the touch-screen display
are shown in bold within brackets, [ ] (e.g. [ ]).
13-EN
Initial System Start-Up
Touch Screen Operation
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
You can operate the system by using the touch panel on the screen.
Turn off the unit power.
Press the RESET switch with a ballpoint pen or similar
pointed object.
• Be sure to touch the onscreen button lightly with the pad of your finger
to avoid scratching the display.
Touch operation
Touch a button or list item on the screen lightly.
• If you touch a button and there is no reaction, remove your finger.
• Onscreen buttons that cannot be operated are dimmed.
RESET switch
Swipe operation
Move your finger lightly with a swipe.
Adjusting the Volume
Adjust the volume by pressing
/ .
Volume decreases/increases continuously by pressing and holding
/ .
Volume: 0 - 35
Lowering Volume Quickly
Audio Mute function instantly lowers the volume level to 0.
Press the
Drag & Drop operation
Touch and hold the desired item, then drag it to its new location by
moving your finger, then release your finger to place the item.
(MUTE) button to activate the MUTE mode.
The audio level will be 0.
Pressing the
(MUTE) button again will bring the
audio back to its previous level.
• It is not possible to narrow the screen with two fingers (pinch in) or
spread the screen (pinch out).
14-EN
Switching Sources
Switching Sources from the Menu screen
Press the
(MENU) button.
The menu screen is displayed.
• You can also display the menu screen by touching the lower part of
the Audio source screen or by swiping upward.
Operating the Function Button on the Audio/
Video Main Screen
Using the Function button on the Audio/Visual main screen.
Touch [ ] to change to the Function mode.
HD Radio main screen example
The Audio source selecting area
Touch your desired source in the Audio source selecting
area.
Function mode
Radio
USB/iPod*1
Factory Media (USB/iPod)*2
HDMI*1, 3
Pandora*1
Bluetooth Pandora*1, 4
SiriusXM*1 or Factory
SiriusXM*2
AUX*3, 5
Bluetooth Audio*1
Apple CarPlay
Music/Google Play Music*6
Radio
*1 When no USB flash drive/iPod/HDMI device/Smartphone/Bluetooth
compatible device/SiriusXM Tuner is connected, this option is not
available. When using Apple CarPlay, some option may not available.
*2 Not displayed when your car does not support the source or “Setting the
Source Category” (page 45) is set to “Aftermarket.” This is also not
displayed when the iDataLink module is not connected.
*3 The name set for “HDMI Setup” (page 42), “Setting the Auxiliary
(AUX) Name” (page 42), is displayed.
*4 When Bluetooth Pandora is set to “Off ”, this option is not available.
(page 42)
*5 When AUX is set to “Off,” this option is not available. (page 42)
When the iDataLink module (sold separately) is connected, the
Auxiliary (AUX) mode is not available.
*6 Available when an iPhone 5 or later/Android™ smartphone which
installed Android Auto App is connected.
Swipe to the right or left to change to the Function mode.
To close the Function mode, touch [ ].
• Depending on the Audio source, the Function mode displays from the
beginning.
• In the menu screen, you can change the Audio source directly or change
the order in which sources change. For details, see “About the Menu
Screen” (page 18).
15-EN
About Basic Operation for List Screen
About the Shortcut Setup Screen
Basic operations on the Setup list screen and the Search list screen.
How to display on the list screen differs depending on the selected item.
Displaying the Sound Setup screen.
Touch the upper part of the Audio source screen or swipe
downward.
The Sound Setup screen is displayed.
Sound Setup screen (Tone Adjustment mode) example
Switches to the menu screen or the previous screen.
Item select button
Closes the window.
Displays the next list page.
• When the next selection item does not exist, the list item is not
displayed.
Lists items for selection
• When there are more than five list items, the page can be changed
by swiping vertically.
Returns to the list screen of the page that you touched.
• The list screens that can be displayed are up to the 2 previous
pages. If you touch [ ], you can recall your desired page.
Changes the page of the Item select button
• “ ” indicates the total number of pages, “
location of the current page.
above.
” indicates the
List screen close button
• Touch or swipe to the left on the search screen, etc. to close the list
screen.
16-EN
Button for Display Off *
Displays the registered Bluetooth Device List screen.
• See “Pairing a Bluetooth Device” (page 27).
Touch this or swipe upward to change to the currently
playing source screen.
Displays the Hands-free Device Primary/Secondary setting
screen.
• See “Hands-free Device Primary/Secondary Setting” (page 28).
* Display Off mode
- To cancel Display Off mode, touch the screen or press any button.
- Display Off mode is canceled when the power or ACC is turned off.
- When the gear lever is shifted to the reverse (R) position and the rear
camera is connected, the rear camera image is displayed.
- When a call is received on a Bluetooth-connected phone, the
incoming call screen is displayed.
Adjusting Bass Level/Treble Level
Sound Setup Function
Bass Level and Treble Level can be set independently set for Front and
Rear speakers by touching [Front] or [Rear].
Tone Adjustment mode
Setting item:
Bass / Treble
Setting contents:
-14 to +14 (Initial setting: 0)
• When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting
is disabled.
• Adjustment cannot be performed when Defeat is set to “On.”
• The Bass adjusted setting value is interlinked with Band2 of Dual HD
EQ, and the Treble adjusted setting value is interlinked with Band8.
Setting the BASS ENGINE SQ
Setting the BASS ENGINE Type
Creating the ideal Bass impact for your musical taste using BASS
ENGINE SQ.
BASS ENGINE SQ mode
Setting contents:
Standard (Initial setting) / Punch / Rich / Mid Bass / Low Bass
Standard:
Punch:
Rich:
Mid Bass:
Low Bass:
Adjusting the BASS ENGINE Level
Button for changing the BASS ENGINE SQ mode screen
Balance/Fader Image area*1
• To reset to the initial settings (Balance: 0, Fader: 0), touch [
Mild low-end boost with mid-range focus for frontcenter staging.
Mid-bass punched up with mid-range impact.
Accented highs and mid-bass giving outstanding
balance for all types of music.
Strong high frequency emphasis with mid-bass boost
for more low-end attack.
Strong, low-bass boost with extended highs for a very
dynamic sound.
You can adjust the BASS ENGINE Level.
].
Buttons for switching between Front/Rear when adjusting
Bass/Treble*2
Buttons for adjusting Bass Level/Treble Level*3, 4
Buttons for adjusting Media Xpander *1, 3
Buttons for adjusting Subwoofer Level *1, 3, 5
Button for changing the Tone Adjustment mode screen
Setting item:
BASS ENGINE Level
Setting contents:
0 to 6 (Initial setting: 3)
• The BASS ENGINE Level 0 of the BASS ENGINE SQ is common to all
the types.
• If changing to the Tone Adjustment mode, BASS ENGINE SQ
mode will be disabled.
About setup when the external power amplifier is
connected
Buttons for adjusting the BASS ENGINE Level*4
Buttons for selecting the BASS ENGINE type *4
*1 You can perform a more detailed set up in “Sound Setup” (page 30).
*2 You cannot switch when Front/Rear Sync in “Adjusting the Parametric
Equalizer Curve (Dual HD EQ)” (page 31) is “On.”
*3 When you switch to the BASS ENGINE SQ mode, the value you have
set is ignored.
*4 When the Defeat setting is “On,” you cannot perform the set up.
*5 If the Subwoofer setting is “Off,” the setting cannot be changed. See
“Turning Subwoofer ON/OFF” (page 30).
In order to optimize the BASS ENGINE SQ mode, we recommend the
following procedure to set up the power amplifier.
Use your favorite music to make the following amplifier adjustment.
1)
2)
Set GAIN of the power amplifier to “MIN.”
Set the Crossover Mode Selector switch to “OFF.”
• If the switch has no “OFF” position, set as near as possible to full
range.
3)
4)
Set the BASS ENGINE Level to “03.”
Play a song of the genre you frequently listen to, and adjust
GAIN of the power amplifier.
17-EN
Setup button
About the Menu Screen
Displays the Setup screen. (page 26)
Phone button*2
Displays the Phone menu screen. (page 67)
• Depending on the setting and connected devices, the displayed
icons and orders may differ. Touch
to display more icons such
as [Notifications]*3, [Android Auto]*4, [Apple CarPlay]*5 and
[Vehicle Info]*6.
In the menu screen, you can select the audio source and perform various
setups or operations on the unit.
Press the
(MENU) button.
The menu screen is displayed.
• You can also display the menu screen by touching the lower part of the
Audio source screen or by swiping upward.
*1 Displays when the Camera Select is set to “Rear.” (page 43)
*2 Displays when the Bluetooth setting is set to “On.” (page 27)
*3 Use to display the Facebook Notification List on the connected
smartphone via this unit. (page 25)
Displays when Alpine TuneIt App is set to “USB (iPhone)” or
“Bluetooth (Android),” and when a smartphone with Alpine TuneIt
App installed is connected. (page 24)
*4 Displays the Android Auto screen, displayed when an Android
Smartphone installed Android Auto App is connected. (page 47)
*5 Displays the Apple CarPlay screen, displayed when an iPhone 5 or later
is connected. (page 47)
*6 Displays the iDataLink mode screen. (page 78)
Edit Menu
Menu screen example
You cannot operate the Edit Menu screen while driving.
Your vehicle must be parked with the ignition key in the ACC or ON
position. For details, see “To display the Setup Menu screen” in
“Setup Operation” (page 26).
In the Edit Menu screen, you can change the audio source order or set
the display/hide settings.
Touch the desired source icon in the Menu screen for at
least 2 seconds.
A checkbox ( or ) is displayed on the upper left area of the
source icon and switches to the edit mode.
Displays the currently playing audio source.
Displays the total number of the audio sources that can be
selected. Also displays the current position, counting from
the leftmost audio source.
Touch or swipe downward to return to the Audio source
screen.
Audio source select area
Touch your desired source icon to change the audio source.
• Swiping to the right or left in the Audio source select area, you can
change one audio source at a time. Moreover, swiping to the right
or left outside the Audio source select area (upper and lower sides),
you can change pages of the Audio source select area.
• The source icon displayed in the Audio source select area is the one
checked on the Edit menu screen. For details on how to display/
hide the source icon, see “Edit Menu” (page 18).
• The source icon displayed in the Edit Menu screen is displayed
only when usable setup and conditions of each Audio source are
fulfilled. For details on setup and conditions of each audio source,
see “Switching Sources” (page 15).
Changing the order of Audio source
Drag and drop the source icon to the desired location.
Displays Preset No, and information of the Search mode, etc.,
located in the middle of the Audio source select area.
Hiding/Displaying Audio source
• Touch the desired preset number or the Search mode to change the
audio source directly.
• The displayed information differs depending on the audio source.
Some sources are not displayed.
Place a check in the checkbox ( ) to display the Audio source
icon. Uncheck the checkbox ( ) to hide it.
• You cannot hide the icon of a source that is currently playing.
Touch to display more icons. (Displayed only when icons’
number over 5.)
External Accessory Control button
Is displayed when the optional External Accessory Control
module is connected and “Setting the External Accessory
Control” is set to “On” (page 45).
• You can operate the external accessories from this unit. For details,
see “External Accessory Control Operation” (page 80).
• Editing here is reflected in the order of Audio source. (page 15)
Camera button*1
Displays camera images. (page 76)
18-EN
Touch [Done].
The editing content is confirmed, and returns to the menu screen.
About the Indicator Display
Opening screen Customization
The Indicator Bar at the bottom of the screen displays various types of
information, like the current time.
You can set a BMP image that is stored on a USB flash drive as the
opening screen.
This setting requires the following image format, folder name and file
name.
Usable file format:
- BMP image
- Image size: 800 × 480 pixels (RGB 24 bit or less/number of color bit:
24, 8, 1 bit)
- Compression format: non-compressed
- Folder name*1: OPENINGFILE
- File name*2: openingfile.bmp
Lights up when connected to a Bluetooth compatible
device. (Does not display when connection is set to OFF.)
: Bluetooth connection to Hands Free Phone
Blinks while reconnecting.
Indicates the battery level of the connected Bluetooth
device*.
Level 3
Level 2
Level 1
No Battery
Icon
This may not be displayed depending on the connected
Bluetooth device. Whenever one battery level decreases, the
alarm sounds.
Indicates the signal strength level of the connected
Bluetooth compatible device*.
Displayed when Bluetooth setting is ON.
Connect the USB flash drive to the USB extension cable.
Touch [OK].
: Bluetooth connection to audio device
Battery
Level
No Service
A message confirming the opening screen change is displayed.
An update indicator “
(Loading)” is displayed, and update for
the opening screen starts.
After the update is complete, the following message is
displayed.*3
“The logo has been updated successfully! Please remove Flash
Memory and press OK.”
After removing the USB flash drive, touch [OK].
The opening screen setting is complete.
*1 Be sure to save the folder to the first layer of the USB flash drive.
*2 Only one BMP image can be set as the opening screen.
*3 If “Customization failed,” is displayed, touch [OK] and then check that
the folder name, file name and file format are correct.
• Do not perform the following actions during the update.
- Do not turn off the ACC to the car.
- Do not unplug the USB flash drive.
- Do not turn off or operate the unit.
• To return the opening screen to its original image, you must Clear All
Settings. Be careful of this operation, as your other settings are also
initialized. For details, see “Initializing the System” (page 38).
Plasmacluster indicator
Indicates the setting value (Low/Mid/High) selected in
“Plasmacluster air volume adjustment.”
The clock display
You can switch between the 12 hour display and 24 hour display
options.
For details, refer to “Setting the Clock Display” on page 38.
Bluetooth devices Name*
* When you connect two Hands-Free Phones, the information of the
Bluetooth device set to Primary is displayed.
19-EN
How to Input Characters and Numbers (Keypad)
The displayed screens and procedures may vary slightly depending on
the function used, but the basic input method is the same.
Input screen area.
Cursor position alteration switch
Cancel
Keypad mode finishes.
(Delete)
Returns to the previous character and erases it.
Touching here for more than 2 seconds will erase all input
characters.
Input number is confirmed.
Character keypad
Space
Special character selector switch
The Alphanumeric/Special characters/Symbols selection popup
is displayed.
Touch the desired character type.
20-EN
Favorite Function
Editing the Favorite Screen
You cannot edit the Favorites screen while driving.
Using the Favorite Function
This unit enables you to recall functions easily by registering frequently
used items such as the Audio source, the Shortcut Dialing icons, etc. to
the Favorite screen. You can recall any of these items easily.
Press the
Your vehicle must be parked with the ignition key in the ACC or ON
position. For details, see “To display the Setup Menu screen” in
“Setup Operation” (page 26).
(Favorite) button.
Touch [
] (Edit).
A checkbox is displayed on the upper left area of the registration
icon and it changes to Edit mode.
The Favorite screen is displayed.
Favorite screen example
Setting item:
Item registration / Item name change / Icon change / Layout change /
Item deletion
Changes to the Edit screen used for registering items or
changing names.
Close the Favorite screen
Favorite registration item
Swipe to the left and right to change the pages. You can add up
to 6 pages.
Indicates the location of the currently displayed Favorite
screen.
Swipe to the left and right to change the pages. You can add up
to 6 pages.
Touch your desired Favorite registered item.
The desired item is displayed.
After editing is complete, touch [ ] (Save).
After the caption for the confirmation is displayed, touch
[Yes].
Editing is complete.
• If you touch [
] (Cancel) while editing, the edits are reset and the
screen returns to the previous Edit screen.
Registering Items
Touch [
Touch the desired item to be added (category).
Choose the desired item to be added.
] (Add).
The items to be added (categories) are displayed.
• When making a phone call by choosing shortcut dialing, after the
message of confirmation of outgoing phone calls is displayed, touch
[Call]. For details, see “Calling by Favorite Function” (page 69).
• You can add up to 54 items.
• You cannot register an item more than once.
21-EN
Audio/Visual
[Radio]*1 / [USB/iPod] / [Factory Media (USB/iPod)]*2 / [HDMI/DVD] /
[Pandora] / [Bluetooth Pandora] / [SiriusXM]*3 or [Factory SiriusXM]*2, 3 /
[AUX]*4 / [Bluetooth Audio] / [Apple CarPlay]*5 / [Android Auto]*5
*1 You can choose the frequency from Preset 1 - 12, registered into each
FM1/FM2/AM band of HD Radio™ or RBDS.
*2 Not displayed when your car does not support the source or “Setting the
Source Category” (page 45) is set to “Aftermarket.” This is also not
displayed when the iDataLink module is not connected.
*3 You can choose a channel registered to Presets 1 - 18.
*4 When “AUX” is selected, the source name set in “Setting the Auxiliary
(AUX) Name” (page 42) is also displayed in the Favorite screen.
When the iDataLink module (sold separately) is connected, the
Auxiliary (AUX) mode is not available.
*5 You can register now playing Apple CarPlay Music or Google Play
Music depending on the connected Smartphone.
• You can also register directly by touching [
screen.
Changing Icons (only the Shortcut Dialing
icons)
You can change the icons of Shortcut Dialing category.
The following example explains how to change the Shortcut Dialing
icon.
Touch the icon that you want to change.
] in the Audio source
The icon list is displayed.
However, if it is already registered, [
Touch the icon you want to change from the icon list.
] is not displayed.
Phone (Shortcut Dialing)*6
You can register the user’s shortcut dialing stored in the Phone Book.
The icon is changed to the selected icon.
• If multiple phone numbers are stored, select a number you want to
register.
• You can register directly by touching [
] of the Contacts list.
(page 67)
• You can change the icon you registered. (page 22)
*6 You can only select Phone when a mobile phone is connected.
For details on how to register a mobile phone and downloading Phone
Book, see “Bluetooth Operation” (page 67).
Changing Item Names
Touch the text area of the registered item.
Changing the Layout
Drag and drop the item to the desired location.
The Input User Name screen (Keypad) is displayed.
Input the name and touch [OK].
• For details on how to input characters using the keypad, see “How to
Input Characters and Numbers (Keypad)” (page 20).
22-EN
The item location is changed.
• When you move to other pages, switch pages, or when you make a new
page and move to another, drag to the end of the screen, and lift your
finger after the page changes.
Deleting Items
When deleting a selected item
Touch the checkbox at the left of the item you want to
delete and place a check (
) in it.
Touch [ ] (Delete).
The selected item will be deleted.
When deleting all items
Touch [
] (Delete All).
All items are deleted.
23-EN
Applying Alpine
TuneIt App
This unit’s sound tuning is programmable from a connected
Smartphone. It is also possible to download specific parameters for
certain vehicles from Alpine’s TuneIt database stored in the Cloud. Using
the Alpine TuneIt App, customized parameters can also be uploaded for
others to share and rate.
Through this unit, it is also possible to receive and respond to
information from Alpine’s Social Network Service (SNS) available
through the connected Smartphone.
The installed Alpine TuneIt App should be launched on the Smartphone
before connection to the head unit.
Alpine TuneIt App, is downloadable from Apple’s App Store; the
Android user can download it from Google Play™. For details, consult
your Alpine dealer.
Before these operations, set TuneIt to USB (iPhone) or Bluetooth
(Android) depending on the connected Smartphone. For details, see
“Smartphone Apps Setup” (page 46).
• The application program and related specifications and data may be
deleted or terminated without notice.
• Some Alpine TuneIt App functions may not be available if the
Smartphone is not in a service area or receives no signal.
Adjusting the sound via the Smartphone
After setting the above procedure, you can adjust the unit’s sound
function on the Smartphone.
Make sure the unit is powered on.
Launch the Alpine TuneIt App on the Smartphone.
Adjust the unit’s sound accordingly on the Smartphone.
• The setting cannot be done on both the Smartphone and this unit at the
same time. While the sound function of this unit is set via Smartphone,
the sound function settings on the unit will be displayed as “Sound APP
Connected.”
• In some situations, such as the unit is powered off or during a call, etc.,
sound setting cannot be done via the Smartphone.
• This function may not be available depending on the paired
Smartphone.
• Please obey all local traffic laws while using this function.
• When “Setting the External Audio Processor” (page 45) is “On,” this
function is not available.
Facebook Notification Function
Some functions may be available in a future version of Alpine TuneIt
App.
• Depending on the paired Smartphone, the following functions may not
be available even though the Alpine TuneIt App version is updated.
Receiving Notification
When the smartphone connected to the unit receives new notifications
from Facebook, the unit emits a notification sound or displays the
notification screen. Set this up in the Alpine TuneIt App settings.
24-EN
Notification Incoming screen example
Poster’s picture and name
Touch here to switch to Facebook screen.
Facebook screen is not displayed while driving.
Read (Stop) button
Touch to TTS (Text To Speech) play received notification
(Depending on the status, operation may not be available).
During TTS play mode, touch [Stop] to stop play.
Like button
For “Like” operation. (Valid when Wall Posts or Comments is
received)
Notifications button
Touch to switch to Notifications List screen.
Close button
Close the notification screen.
Touch the desired button to operate.
• A new received Notification prompt will last for 15 seconds. If there is
no operation within 15 seconds, the unit will return to normal mode.
• Touching current main screen will close the notification screen.
• Volume adjustment during TTS play can be adjusted by / (0-35).
Settings will be reflected at the next TTS reproduction.
• The TTS volume is output via the car’s front right and left speakers.
Displaying Facebook Screen
During Notification incoming or Notification List screen, you can
switch to Facebook screen.
Facebook screen example
Message content
Poster’s photo
Close button: Close the Facebook screen.
Touch the poster’s picture and name to switch to the
Facebook screen.
The detailed information of Notification is displayed.
• Touch [ ] (Back) to return to Notifications List screen.
• Depending on the status, contents of message and photo may not be
displayed.
• In some situations, such as the unit is powered off or during a call, etc.,
Notification of the Smartphone will not be prompted by this unit.
• Facebook screen is not displayed while driving.
Displaying Notification List
You can view the received Notification from Facebook in the
connected Smartphone via this unit.
Notification List screen example
Poster’s Name and Message
Messages are not displayed while driving.
Touch [Read All]/[Stop] to play/stop all Notifications.
•
•
•
•
You can switch to the Notification List screen from the Menu screen.
Touch [ ] to return to Current screen.
Depending on the status, some functions may not be available.
The displayable amount of the Notification list depends on the
connected Smartphone.
25-EN
3
Setup
Setting items:
Wireless: See “Wireless (Bluetooth) Setup” (page 27).
General: See “General Setup” (page 29).
Source: See “Source Setup” (page 39).
System: See “System Setup” (page 43).
Setup Operation
To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Release the parking brake. (For safety, release the parking
brake while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the Setup operation has been released.
Engaging the parking brake can reactivate the Setup Menu, as long as
the car’s ignition has not been turned off. It is not necessary to repeat
the above procedure (1 through 3) of “To display the Setup Menu
screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Setup Menu screen.”
Press the
(MENU) button.
The Menu screen is displayed.
• You can also display the menu screen by touching the lower part of
the Audio source screen or by swiping upward.
[Setup] button
Touch [Setup].
The Setup main screen is displayed.
26-EN
Touch the required setting icon on the upper part of the
Setup main screen or swipe the list area vertically, then
touch the setting item.
Wireless (Bluetooth) Setup
[Wireless] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 26).
Bluetooth Setup
[Bluetooth] is selected on the Wireless Setup Menu screen in step 1. See
“Wireless (Bluetooth) Setup” (page 27).
You can register and set up Bluetooth compatible devices.
Wireless Setup Menu screen
Bluetooth
Setting item:
Bluetooth
Setting contents:
Off / On (Initial setting)
Bluetooth Information*1/2
Off:
Set Bluetooth Device*1/2
Hands-free Device Priority*1/2
On*:
iPhone Auto Pairing*1/2
Device
Passcode Change
Default Phone Book Format
Phone Speaker
*1 This setting is only available when “Bluetooth” is set to “On” ( ).
*2 Cannot be adjusted when an iPhone 5 or later/Android smartphone
which installed Android Auto App is connected, and “Bluetooth” is
fixed to “On”.
The following steps 1 to 3 are common to each “Setting
item” of Wireless Setup. See each section for details.
Bluetooth function is not used. When the phone
function is during using via Apple CarPlay or Android
Auto, you cannot select “Off”.
Turn ON to begin phone pairing process.
* Turn this setting “On” to automatically connect a registered Bluetooth
device whenever this unit is turned ON. See “Registering the Bluetooth
Device” if no device is registered.
Displaying Bluetooth Information
Make sure the “Bluetooth” setting is “On” ( ).
You can display the Bluetooth device name and device address of this
unit.
Setting item:
Bluetooth Information
Pairing a Bluetooth Device
Select the desired item.
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes “Off”( ) or “On”(
).
Make sure the “Bluetooth” setting is “On” (
(page 27).
Search for Bluetooth compatible devices.
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
Setting item:
Set Bluetooth Device
Touch [
] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 16).
Touch [
). See “Bluetooth Setup”
] (Search) of “No Device.”
The Bluetooth devices can be searched are displayed in a list.
27-EN
2
Touch [ ] (Audio), [ ] (Hands-free) or [
] (Both)
of the device you want to connect from the list.
Hands-free Device Primary/Secondary Setting
Audio:
Device is used as an Audio device.
Hands-free: Device is used as a Hands Free Device.
Both:
Device is used as both an Audio device and Hands Free
Device.
Make sure the “Bluetooth” setting is “On” ( ). See “Bluetooth Setup”
(page 27).
When you connect two Hands-Free Phones, set the priority of the
operation and the setting of incoming-outgoing calls.
• You can register up to 5 Bluetooth compatible mobile phones.
• You can connect three Bluetooth Devices; two exclusively for
Hands-Free Phone and one exclusively for Bluetooth Audio.
• When you register a Hands-Free Phone for the first time, Primary
is set automatically. When you connect two Hands-Free Phones,
select “Hands-free” or “Both.” You can then set the priority on the
Primary/Secondary setting screen. For details, see “Hands-free
Device Primary/Secondary Setting” (page 28).
When the device registration is complete, a message
appears and the device returns to normal mode.
• The Bluetooth registration process differs depending on the device
version and SSP (Simple Secure Pairing). If a 4 or 6 character Passcode
appears on this device, enter the Passcode using the Bluetooth
compatible device.
If a 6 character Passkey appears on this device, make sure the same
passkey is displayed on the Bluetooth compatible device and touch “Yes.”
• If all 5 devices have been registered, you cannot register a 6th device. To
register another device, you need to delete one of the other
5 devices first.
Setting the Bluetooth Device
Setting item:
Hands-free Device Priority
Setting contents:
Primary / Secondary
Touch the checkbox for Primary/Secondary of the device
names that are registered to the unit to set them.
• When connected to two hands-free phones, operating restrictions apply
to the hands-free phone registered to Secondary. For details, see
“Hands-free Phone Control” (page 67).
iPhone Auto Pairing Setting
Make sure the “Bluetooth” setting is “On” ( ). See “Bluetooth Setup”
(page 27).
When an iPhone is connected via USB and it is not on the Registered
Device list, it will be paired automatically.
Setting item:
iPhone Auto Pairing
Setting contents:
On / Off (Initial setting)
Select one of 5 paired Bluetooth compatible devices that you previously
registered.
Touch [ ] (Audio) or [ ] (Hands free) of the device you
want to connect from the Paired Device list.
On:
Off:
Performs iPhone Auto Pairing setting.
Does not perform iPhone Auto Pairing setting.
• This setting supports iPhones with iOS Ver.5.5 or later.
• When more than 5 Bluetooth devices are registered, Auto Pairing does
not start.
Device Setup
[Device] is selected on the Wireless Setup Menu screen in step 1. See
“Wireless (Bluetooth) Setup” (page 27).
You can make various settings for a Bluetooth compatible device.
Setting the Passcode
Deleting a Bluetooth Device from the list
You can set the code for connecting with a Bluetooth compatible device.
You can delete the information of a previously connected Bluetooth
compatible device.
Setting item:
Passcode Change
Touch [ ] (Delete) of the Bluetooth compatible device
to delete from the Paired Device list.
Touch [OK].
• Touching [Cancel] will cancel the setting.
28-EN
Enter a 4-digit passcode (old), and then touch [OK].
• The initial number is 0000.
Enter a 4-digit passcode (new), and then touch [OK].
Enter the passcode that you entered in step 2 again, and
then touch [OK].
Changing the Character Code of the Phone
Book
You can select the character code that is used when transferring the
phone book or history from a mobile phone. If unreadable characters
appear in the transferred data, select the correct character code.
General Setup
[General] is selected on the setup main screen in step 3. See “Setup
Operation” (page 26).
General Setup Menu screen
Setting item:
Default Phone Book Format
Setting contents:
Latin-1 / Latin-9 (Initial setting) / Russian / Chinese / Thai / Arabic / UTF-8 /
UTF-16LE / UTF-16BE
Latin-1:
Latin-9:
Russian:
Chinese:
Thai:
Arabic:
UTF-8
UTF-16LE
UTF-16BE
ISO 8859-1
ISO 8859-15
ISO 8859-5
GB18030
CP874
CP1256
Sound
Balance / Fader *1
Selecting the Output Speaker
Rear Speaker*2
Subwoofer*2
You can select which speaker in the car will output the audio from the
phone.
Subwoofer Level*1, 2, 3, 5
Setting item:
Phone Speaker
Setting contents:
All (Initial setting) / Front Left / Front Right / Front Left + Right
MX HD*1, 4, 5
All:
Front Left:
Front Right:
Front Left +
Right:
The sound is output from all speakers in car.
The sound is only output from the front left speaker.
The sound is only output from the front right speaker.
The sound is output from the front left and front right
speakers.
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• This option is not available when “External Audio Processor” (page 45)
is set to On.
Subwoofer Phase*2, 3
EQ Presets*4, 5
Dual HD EQ*4, 5
X-Over*5
Time Correction (TCR)
Defeat
Source Volume Setup
Caller Level*6
Microphone Level*6
Ring Tone Level*6
Key Sound Feedback
Microphone EC/NR
Default Sound Settings
Language
Picture Quality
Video*7
Camera*8
Display/Key
Screen/Lighting
Screen Color
Text Scroll
Artwork Position
General
Format
Clock Mode
Clock Adjust
Daylight Saving
About
Demo Mode
Vehicle
Steering wheel
Installation Status
29-EN
*1 You can make this setting in the Sound Setup screen of the Shortcut
Setup. For details, see “Sound Setup Function” (page 17).
*2 You can also make the setting in the Bal./Fad. screen.
For details on how to adjust, see “Setting the Balance/Fader/Rear
Speaker/Subwoofer” (page 30).
*3 This setting is only available when “Subwoofer” is set to “On” ( ).
*4 When the Defeat setting is “On,” you cannot perform the set up.
*5 When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting
is disabled.
*6 Not displayed when an iPhone 5 or later/Android smartphone which
installed Android Auto App is connected.
*7 “Video” can be selected while a video is playing.
*8 The camera names are not displayed when Camera Select (page 43) is
set to “Off.”
The following steps 1 to 3 are common to each “Setting
item” of General Setup. See each section for details.
Select the desired item.
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes “Off” ( ) or “On” (
).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
Touch [
] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 16).
Fad./Bal. screen
Enables you to change to each setting screen.
Balance/Fader Image area
Setting the Balance/Fader
Touch the desired point within the image area. Or touch [
[ ] [ ] [ ].
Balance:
L15 to R15
Fader:
F15 to R15
• To reset to the initial setting (Balance: 0, Fader: 0), touch [Center].
Rear Speaker Setting
Sound Setup
[Sound] is selected on the General Setup Menu screen in step 1. See
“General Setup” (page 29).
You can set up items related to the sound quality.
You can set the rear speaker output to “Off.”
Setting item:
Rear Speaker
Setting contents:
On (Initial setting) / Off
Turning Subwoofer ON/OFF
If an optional subwoofer is connected to the unit, make the following
setting.
Setting item:
Subwoofer
Setting contents:
On / Off (Initial setting)
Adjusting the Subwoofer Level
You can set the Subwoofer level when a Subwoofer is connected.
Setting the Balance/Fader/Rear Speaker/
Subwoofer
Set Balance/Fader/Rear Speaker/Subwoofer/Subwoofer Level/
Subwoofer Phase in the Bal./Fad. screen.
Setting item:
Balance*1 / Fader*1 / Rear Speaker / Subwoofer*2 / Subwoofer Level*1, 2 /
Subwoofer Phase*1
*1 When selecting either of the above setting items, the Bal./Fad. screen is
displayed.
*2 When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting
is disabled.
Setting item:
Subwoofer Level
Setting contents:
0 to 15 (Initial setting: 0)
• This setting is only available when “Subwoofer” is set to “On” (
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item:
Subwoofer Phase
Setting contents:
0° (Initial setting) / 180°
• This setting is only available when “Subwoofer” is set to “On” (
30-EN
).
).
Setting the Media Xpander (MX HD)
Media Xpander (MX HD) makes vocals or instruments sound distinct
regardless of the music source. The HD-Radio Technology (FM)/
SiriusXM, USB Flash drive and iPod/iPhone, will be able to reproduce
the music clearly even in cars with a lot of road noise.
Setting item:
MX HD
• When the Defeat setting is “On,” you cannot perform the set up.
• When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting
is disabled.
• The MX HD setting can be performed only when a source is currently
selected.
Equalizer Presets
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting item:
EQ Presets
Setting contents:
FLAT (Initial setting) / POP / ROCK / NEWS / JAZZ / ELECTRONIC /
HIP HOP / EASY LISTENING / COUNTRY / CLASSICAL
• Only one type can be set to ON.
• When Equalizer Presets is set, the linked Dual HD EQ settings are also
changed. We recommend storing Dual HD EQ settings in a Preset in
advance.
• The Equalizer Presets setting can be configured when Defeat is “Off.”
Adjustable source (media) and setting value
HD-Radio™ (FM)/SiriusXM: Off (Initial setting) / Level1 / Level2 / Level3
The medium to high frequencies become more clear, and produces
well balanced sound in all the bands.
Compressed Media/Factory Audio: Off (Initial setting) / Level1 / Level2 /
Level3
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to the
original.
HDMI/AUX: Off (Initial setting) / Compressed Media / Movie / Music
Choose the MX HD mode (Compressed Media, Movie, or Music) that
corresponds to the media connected.
(Movie)
The dialog portion of the video is reproduced more clearly
(Music)
This file contains a large quantity of data such as music clip. MX uses
this data to reproduce the sound accurately.
Adjusting the Parametric Equalizer Curve
(Dual HD EQ)
Parametric Equalizer (Dual HD EQ) can adjust the center frequency/Q
Factor (bandwidth)/level for the front and rear speakers independently.
You can adjust only to the approximate frequency zone, but can then
compensate by performing advanced correction of the sound.
Setting item:
Dual HD EQ
• When the Defeat setting is “On,” you cannot perform the set up.
• When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting
is disabled.
Adjust the Dual HD EQ to your preference.
• The effect increases as the MX HD setting value increases Level1
Level2
Level3.
• You can set this for each source.
• iPod/iPhone/USB Audio/Bluetooth Audio/Pandora/Bluetooth
Pandora/Apple CarPlay Music/Google Play Music correspond to
Compressed Media.
• Factory Media (USB/iPod)/Factory SiriusXM correspond to Factory
Audio.
Front/Rear speaker switching button
Not displayed when Front/Rear Sync is ”On” (
).
Front/Rear speaker interlock button
On:
Off:
When you want the Front and Rear speakers to have the
same setting, set to ”On” ( ).
When you want to set the Front and Rear speakers
independently, set to ”Off” ( ).
Adjusting the Band
Touch [Band] to select the band to be adjusted.
Band1
Band2
•••
Band8
Band9
Band1
• You can select a band directly by touching the screen.
31-EN
Adjusting the Frequency
Touch [ ] or [ ] of “Frequency” to adjust the frequency of the
selected band.
Adjustable frequency bands:
20 Hz to 20 kHz (in 1/3 octave steps)
Band1:
Band2:
Band3:
Band4:
Band5:
Band6:
Band7:
Band8:
Band9:
20 Hz~100 Hz (63 Hz)
63 Hz~315 Hz (125 Hz)
125 Hz~500 Hz (250 Hz)
250 Hz~1 kHz (500 Hz)
500 Hz~2 kHz (1 kHz)
1 kHz~4 kHz (2 kHz)
2 kHz~7.2 kHz (4 kHz)
5.8 kHz~12 kHz (8 kHz)
9 kHz~20 kHz (16 kHz)
Adjusting the Crossover Settings (X-Over)
Before performing the following procedures, see “About the Crossover”
(page 34).
Setting item:
X-Over
• When “BASS ENGINE SQ” is selected in the Shortcut Setup, this setting
is disabled.
Touch [Channel] to select the channel.
Each time you touch, the channel switches.
Adjusting the Level
Touch [ ] or [ ] of “Level” to adjust the level of selected band.
Setting contents:
-14 to +14 (Initial setting: 0)
Setting the Bandwidth
• The channel being adjusted is displayed in red.
Front HPF
Rear HPF
Subw. LPF
Touch [ ] or [ ] of “Q Factor” to select the bandwidth.
Setting contents:
Wide (Initial setting) / Medium / Narrow
To adjust another band, repeat step 1, and adjust all
bands.
To store the adjusted setting value, touch and hold
[Preset 1], [Preset 2], or [Preset 3] for at least 2 seconds.
• Band2 and Band8 are the same as the Bass and Treble controls.
• For details on setting Bass and Treble, see “Adjusting Bass Level/Treble
Level” (page 17).
• Settings exceeding the frequency of adjacent bands are not available.
• While adjusting the Dual HD EQ, you should consider the frequency
response of the connected speakers.
• When the Dual HD EQ is adjusted, the Equalizer Presets are
overridden.
• When Equalizer Presets is set, the linked Dual HD EQ settings are also
changed. We recommend storing Dual HD EQ settings in a Preset in
advance.
• Touch [Flat] to initialize all values.
Touch [ ] or [ ] of “Frequency,” and then select the cut-off
frequency.
Setting contents:
20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) / 100 / 125 / 160 / 200 Hz
Adjusting the Slope
Touch [ ] or [ ] of “Slope,” and then adjust the HPF or LPF slope.
Setting contents:
0 (Initial setting) / 6 / 12 / 18 / 24 dB/oct.
Adjusting the Level
Touch [ ] or [ ] of “Level,” and then adjust the HPF or LPF level.
Setting contents:
-12 to 0 dB (Initial setting: 0)
Touch [Preset 1], [Preset 2], or [Preset 3] on the Dual HD EQ
screen.
The setting stored in the Preset will be recalled.
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Calling the pre-set Dual HD EQ adjusted value.
Calling the Dual HD EQ adjusted value
Front HPF
Repeat steps 1 to 2 to make adjustment to the other
channels.
To store the adjusted setting value, touch and hold
[Preset 1], [Preset 2], or [Preset 3] for at least 2 seconds.
• Touch [Flat] to initialize all values.
• If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot be
edited (page 30).
• If the Subwoofer setting is “Off,” the Subwoofer setting cannot be edited
(page 30).
• While adjusting the X-Over you should consider the frequency response
of the connected speakers.
Calling the X-Over adjusted value
Calling the pre-set X-Over adjusted value.
Touch [Preset 1], [Preset 2], or [Preset 3] on the X-Over
screen.
The setting stored in the Preset will be recalled.
32-EN
Adjusting the Time Correction (TCR)
Before performing the following procedures, see “About Time
Correction” (page 35).
Setting item:
Time Correction
Setting the Volume for Each Source
Setting item:
Source Volume Setup
Radio / SiriusXM / Compressed Media*1 /
iPod Music / AUX*2 / HDMI*2, 3 / Bluetooth Audio / Factory Audio*4 /
Apple Carplay*5 / Android Auto*5
Setting contents*6:
-14 to +14 (Initial setting: 0)
*1 Compressed Media is the music data in a USB flash drive (MP3/
WMA/AAC/FLAC).
*2 The source name set in “HDMI Setup” (page 42) and “Setting the
Auxiliary (AUX) Name” (page 42) is displayed.
*3 Not displayed when an HDMI device is not connected.
*4 Not displayed when an iDataLink module is not connected.
*5 Available when an iPhone 5 or later/Android smartphone which
installed Android Auto App is connected.
*6 Except for Apple CarPlay/Android Auto mode.
Correction mode
Setting the Volume for Apple CarPlay
Touch the Correction mode button.
The pop up screen for selecting the correction mode is
displayed.
Touch [ms], [cm] or [inch] to select the mode for making
adjustments.
The selected mode is displayed on the Correction mode button.
Touch [ ] or [ ] for each speaker to adjust the time or
distance.
0.0 msec to 9.9 msec (0.1 msec/step)
0.0 cm (0.0 inch) to 336.6 cm (132.7 inch) (3.4 cm/step)
All speaker setting values are adjustable in the range of 15 ms or
510 cm.
• Settable source differs depending on the connected device and settings.
To store the adjusted setting value, touch and hold
[Preset 1], [Preset 2], or [Preset 3] for at least 2 seconds.
• Touch [Flat] to set all values to 0.0.
• If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot be
edited (page 30).
• If the Subwoofer setting is “Off,” the Subwoofer setting cannot be edited
(page 30).
Calling the Time Correction Value
Calling the pre-set time correction value.
Touch [Preset 1], [Preset 2], or [Preset 3] on the time
correction screen.
The setting stored in the Preset will be recalled.
Setting Defeat
If Defeat is “On,” MX HD, Equalizer Presets and Dual HD EQ functions
are turned Off. This disables any settings made for these functions.
Setting item:
Defeat
Setting contents:
Off (Initial setting) / On
When an iPhone 5 or later is connected, after touching [Apple
CarPlay], you can adjust Media, Phone Calls, Ringtones & Alerts
level, Notifications & Guidance level, Siri and Microphone Level
for Apple CarPlay mode.
Setting item:
Media / Phone Calls / Ringtones & Alerts / Notifications & Guidance / Siri /
Microphone Level
Setting contents for Media:
-14 to +14 (Initial setting: 0)
Setting contents for Ringtones & Alerts:
1 to 6 (Initial setting: 3)
Setting contents for other items:
1 to 11 (Initial setting: 5)
Setting the Volume for Android Auto
When an Android Smartphone is connected, after touching
[Android Auto], you can adjust Media, Phone Calls, Ringtones &
Alerts level, Notifications & Guidance level, Voice Recognition
and Microphone Level for Android Auto mode.
Setting item:
Media / Phone Calls / Ringtones & Alerts / Notifications & Guidance / Voice
Recognition / Microphone Level
Setting contents for Media:
-14 to +14 (Initial setting: 0)
Setting contents for Ringtones & Alerts:
1 to 6 (Initial setting: 3)
Setting contents for other items:
1 to 11 (Initial setting: 5)
Adjusting the Caller Level
You can adjust the volume of the incoming call.
Setting item:
Caller Level
Setting contents:
1 to 11 (Initial setting: 5)
Adjusting the Microphone Level
You can adjust the transmit volume, during the call.
Setting item:
Microphone Level
Setting contents:
1 to 11 (Initial setting: 5)
33-EN
Adjusting the Ring Tone Level
About the Crossover
You can adjust the receive volume, during the call.
Setting item:
Ring Tone Level
Setting contents:
1 to 6 (Initial setting: 3)
Volume Setting
You can change the volume of the sound heard when a button is
touched.
Setting item:
Key Sound Feedback
Setting contents:
0 to 6 (Initial setting: 3)
Crossover (X-Over):
This unit is equipped with an active crossover. The crossover limits the
frequencies delivered to the outputs. Each channel is controlled
independently. Thus, each speaker pair can be driven by the frequencies
for which they have been optimally designed.
The crossover adjusts the HPF (high pass filter) or LPF (low pass filter)
of each band, and also the slope (how fast the filter rolls off the highs or
lows).
Adjustments should be made according to the reproduction
characteristics of the speakers. Depending on the speakers, a passive
network may not be necessary. If you are unsure about this point, please
consult your authorized Alpine dealer.
Cut-off frequency
(1/3 octave steps)
HPF
LPF
Setting the Microphone Effect
Set this item when an iPhone 5 or later/Android smartphone with
Android Auto App is connected.
You can turn on or off the Microphone Effect.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Microphone EC / NR
Setting contents:
On (Initial setting:) / Off
Subwoofer
(LPF)
Rear
speaker
(HPF)
Front
speaker
(HPF)
Slope
Level
HPF
LPF
----
20 Hz 200 Hz
----
0, 6, 12, 18,
24 dB/oct.
0 to
–12 dB
20 Hz 200 Hz
----
0, 6, 12, 18,
24 dB/oct.
----
0 to
–12 dB
20 Hz 200 Hz
----
0, 6, 12, 18,
24 dB/oct.
----
0 to
–12 dB
Low range
High range
Slope adjusting
Default Sound Settings
You can restore the Dual HD EQ*/X-Over*/Time Correction*/MX HD
Level/Rear Speaker/Subwoofer/Subwoofer Level/Subwoofer Phase to
factory settings.
Setting item:
Default Sound Settings
Touch [Set], and the confirmation message appears.
To initialize, touch [OK].
* The setting values that are stored in Preset 1 to Preset 3 cannot be
initialized.
Output frequency
range
Slope
FLAT
Output frequency range
Subwoofer
Rear speaker
Level
adjusting
(0 to –12 dB)
20 Hz
(Different from actual
display)
Front speaker
200 Hz
LPF cut-off
frequency
HPF cut-off
frequency
• HPF (high pass filter): Cuts the lower frequencies and allows the higher
frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the lower
frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to FLAT to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as it
may cause damage to the speaker due to the low frequency content.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer to
the respective Owner’s Manual.
We are not responsible for damage or malfunction of speakers caused by
using the crossover outside the recommended value.
34-EN
About Time Correction
Example 2. Listening Position: All Seats
Adjust the time correction level of each speaker to almost the same level.
The distance between the listener and the speakers in a car vary widely
due to the complex speaker placement. This difference in the distances
from the speakers to the listener creates a shift in the sounds image and
frequency characteristics. This is caused by the time delay between the
sound reaching the listener’s right versus the left ear.
To correct this, this unit is able to delay the audio signal to the speakers
closest to the listener. This effectively creates a perception of increased
distance for those speakers. The listener can be placed at an equal
distance between the left and right speakers for optimum staging.
The adjustment will be made for each speaker in 3.4 cm steps.
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker to a high value
and the rear right to zero or a low value.
The sound is not balanced because the distance between the listening
position and the various speakers is different.
The difference in distance between the front left speaker and the rear right
speaker is 1.75 m (68-7/8").
Here we calculate the time correction value for the front left speaker in the
diagram on the above.
Conditions:
Farthest Speaker – listening position : 2.25 m (88-9/16")
Front left speaker – listening position : 0.5 m (19-11/16")
Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")
Time correction = 1.75 ÷ 343* × 1,000 = 5.1 (ms)
* Speed of sound: 343 m/s (765 mph) at 20°C
In other words, giving the front left speaker a time correction value of 5.1
ms makes it seem as if its distance from the listener is the same as the
distance to the farthest speaker.
Time correction eliminates the differences in the time required for the
sound to reach the listening position.
The time of the front left speaker is corrected by 5.1 ms so that its sound
reaches the listening position at the same time as the sound of other
speakers.
Sit in the listening position (driver’s seat, etc.) and
measure the distance (in meters) between your head and
the various speakers.
Calculate the difference between the distance correction
value to the farthest speaker and the other speakers.
L = (distance to farthest speaker) – (distance to other speakers)
These values are the time correction values for the different speakers.
Setting these values to make each sound reach the listening position
at the same time as the sound of other speakers.
Time Correction Value List
Time
Difference
(msec)
0.0
0.0
0.0
Time
Difference
(msec)
5.1
173.4
68.3
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
3.4
6.8
10.2
13.6
17.0
20.4
23.8
27.2
30.6
34.0
37.4
40.8
44.2
47.6
51.0
54.4
57.8
61.2
1.3
2.7
4.0
5.4
6.7
8.0
9.4
10.7
12.1
13.4
14.7
16.1
17.4
18.8
20.1
21.4
22.8
24.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
176.8
180.2
183.6
187.0
190.4
193.8
197.2
200.6
204.0
207.4
210.8
214.2
217.6
221.0
224.4
227.8
231.2
234.6
69.7
71.0
72.4
73.7
75.0
76.4
77.7
79.1
80.4
81.7
83.1
84.4
85.8
87.1
88.4
89.8
91.1
92.5
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
64.6
68.0
71.4
74.8
78.2
81.6
85.0
88.4
91.8
95.2
98.6
102.0
105.4
108.8
112.2
115.6
119.0
122.4
125.8
129.2
132.6
136.0
139.4
142.8
146.2
149.6
153.0
156.4
159.8
163.2
166.6
170.0
25.5
26.8
28.1
29.5
30.8
32.2
33.5
34.8
36.2
37.5
38.9
40.2
41.5
42.9
44.2
45.6
46.9
48.2
49.6
50.9
52.3
53.6
54.9
56.3
57.6
59.0
60.3
61.6
63.0
64.3
65.7
67.0
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
238.0
241.4
244.8
248.2
251.6
255.0
258.4
261.8
265.2
268.6
272.0
275.4
278.8
282.2
285.6
289.0
292.4
295.8
299.2
302.6
306.0
309.4
312.8
316.2
319.6
323.0
326.4
329.8
333.2
336.6
93.8
95.1
96.5
97.8
99.2
100.5
101.8
103.2
104.5
105.9
107.2
108.5
109.9
111.2
112.6
113.9
115.2
116.6
117.9
119.3
120.6
121.9
123.3
124.6
126.0
127.3
128.6
130.0
131.3
132.7
Distance
(cm)
Distance
(inch)
Distance
(cm)
Distance
(inch)
35-EN
Language Setting
The Setup menu, feedback information, etc. for this unit can be changed
to appear in the selected language.
Setting item:
Language*1 (Language*2)
Setting contents:
Adjusting Brightness
Setting item:
Brightness
Setting content:
-15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display shows
“MIN” or “MAX” respectively.
Adjusting Color of Picture
*1 Display in the currently selected language.
*2 Always display in English.
Picture Quality Setup
[Picture Quality] is selected on the General Setup Menu screen in step
1. See “General Setup” (page 29).
You can set up items related to an image.
Setting item:
Color
Setting content:
-15 to +15 (Initial setting: 0)
You can adjust the color between MIN (-15) and MAX (+15). When it
reaches the minimum or maximum point, the display shows “MIN” or
“MAX” respectively.
Adjusting Tint of Picture
Setting item:
Tint
Setting content:
R15 to G15 (Initial setting: 0)
Adjust the Color from R15 to G15.
Adjusting Image Contrast
Setting item:
Contrast
Setting content:
-15 to +15 (Initial setting: 0)
Settable items differ depending on the application.
[Video] (Video media)*3:
Visual EQ / Brightness / Color / Tint / Contrast / Sharpness
[Camera]*4:
Brightness / Color / Contrast
*3 “Video” can be selected while a video is playing.
*4 The camera names are not displayed when “Off ” is set (page 43).
Selecting the Visual EQ Mode
(Factory’s setting)
You can adjust the contrast between MIN (-15) and MAX (+15). When
it reaches the minimum or maximum point, the display shows “MIN”
or “MAX” respectively.
Adjusting Picture Quality
Setting item:
Sharpness
Setting content:
-5 to +5 (Initial setting: 0)
Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”
appear as the minimum and maximum values specified.
You can select a mode suitable for the subject image.
Setting item:
Visual EQ
Setting contents:
Off (Initial setting) / Night / Soft / Sharp / Contrast
Off:
Night:
Soft:
Sharp:
Contrast:
Initial Setting
Suitable for movies in which dark scenes frequently
appear.
Suitable for CGs and animated films.
Suitable for old movies where images are not clearly
shown.
Suitable for recent movies.
• To return to the default video settings, set this function to Off. Any
Visual EQ selection or changes made are reset their initial settings.
36-EN
Saving and calling the adjusted picture
quality
When adjusting audio (video media), you can store the settings made for
“Adjusting Brightness, Color, Tint, Contrast and Sharpness.”
Setting item:
Preset 1 / Preset 2
After completing “Adjusting Brightness, Color, Tint,
Contrast and Sharpness” (page 36), touch and hold
[Preset 1] or [Preset 2] to save the settings.
Touch [Preset 1] or [Preset 2] to call the saved settings.
Display/Key Setup
Switching the Display Color
You can choose from 8 different display colors.
[Display/Key] is selected on the General Setup Menu screen in step 2.
See “General Setup” (page 29).
You can set up the brightness, color, display, etc., of the screen.
Setting item:
Screen Color
Setting contents:
Blue/Light blue/Aqua/Red/Light Green/Green/Amber/White
Screen/Lighting Customize
Setting the Text Scroll
Touch [Screen/Lighting] in the Display/Key Setup Menu
screen.
The Screen/Lighting setup screen appears.
Setting item:
Dimmer / Key Illumination Level / Screen Dimmer Level
Setting the Brightness of the Backlighting
Backlighting is provided by LEDs light built into the liquid crystal panel.
The illumination control adjusts the brightness of the backlighting based
on the car ambient lighting for easier viewing.
Setting item:
Dimmer
Setting contents:
Auto (Initial setting) / On / Off
Auto:
On:
Off:
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Keep the background illumination of the monitor dark.
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
Scroll display is available if folder name, file name or tag information is
entered.
Setting item:
Text Scroll
Setting contents:
Off (Initial setting) / On
Off:
On*:
Turns off the scroll mode.
Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
* The text scroll is not available while driving.
Switching the Artwork Position
You can set the artwork position to the center or the left.
Setting item:
Artwork Position
Setting contents:
Center / Left (Initial setting)
• When “On” is set, the setting is also applied for the button lighting in
“Adjusting the Dimmer of Button Lighting at Night” (page 37), and
“Adjusting the Minimum Level of Backlight” (page 37).
Adjusting the Dimmer of Button Lighting at Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item:
Key Illumination Level
Setting level:
-2 to +2 (Initial setting: 0)
• This setting is only available when “Dimmer” is set to “On” or “Auto.”
Adjusting the Minimum Level of Backlight
You can adjust the brightness of the backlight. This function could be
used, for instance, to change the screen brightness while traveling at
night.
Setting item:
Screen Dimmer Level
Setting content:
-15 to +15 (Initial setting: 0)
You can adjust the level between MIN (-15) and MAX (+15). When it
reaches the minimum or maximum point, the display shows “MIN” or
“MAX” respectively.
• This setting is only available when “Dimmer” is set to “On” or “Auto.”
37-EN
General Setup
[General] is selected on the General Setup Menu screen in step 1. See
“General Setup” (page 29).
You can set up items related to the clock, etc.
Format settings
The character code to be used for tag text information displayed on the
screen can be selected from 7 character codes.
Setting item:
Format
Setting contents:
Latin-1 / Latin-9 (Initial setting) / Russian / Chinese / Thai / Arabic / Hebrew
Latin-1:
Latin-9:
Russian:
Chinese:
Thai:
Arabic:
Hebrew:
ISO 8859-1
ISO 8859-15
ISO 8859-5
GB18030-2005
CP874
CP1256
CP1255
Setting the Clock Display
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting item:
Clock Mode
Setting contents:
12H (Initial setting) / 24H
Setting the Time
Setting item:
Time Adjust
Additional items:
Hour / Minute
Setting content:
AM12 - PM12 or 0-23 / 0-59
Hour:
Minute:
Adjust the hour.
Adjust the minute.
• Cannot be adjusted while no GPS signal is received.
Setting Daylight Saving Time
Setting item:
Daylight Saving
Setting contents:
Off (Initial setting) / On
Off:
On:
38-EN
Return to the ordinary time.
Place the Summer Time mode ON. The time advances by
one hour.
About iLX-F309
[About] enables you to check the Serial No., Firmware Version, Model
Name, and to initialize various settings.
Displaying the Product Information
You can view the version information of this product. Make note of this
information and refer to it whenever you contact Alpine Tech Support
or an Alpine-authorized dealer.
Setting contents:
Serial No. / Firmware Version / Model Name
Initializing the System
You can initialize all data, to restore the factory settings. Remove the
USB flash drive, etc. from the system before operation
Setting item:
Clear All Settings
Touch [Reset] of “Clear All Settings.”
After the confirmation message appears, touch [OK].
The confirmation screen appears again.
Touch [OK].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.
Setting Demo mode to Off/On
This unit has a Demonstration feature for the display. When you install
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, set Demo mode to Off.
Setting item:
Demo mode
Setting contents:
Off (Initial setting) / On
• If you perform an operation during the Demo mode, the demonstration
is temporarily stopped.
Vehicle Setup
[Vehicle] is selected on the General Setup Menu screen in step 1. See
“General Setup” (page 29).
Source Setup
[Source] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 26).
Source Setup Menu screen
Steering wheel Setting
Set this item when an iPhone 5 or later/Android smartphone with
Android Auto App is connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering wheel
Setting contents:
Left (Initial setting) / Right
Installation Setup
Vehicle Setup enables you to check the connection status of Reverse
Lead/Parking Brake Lead.
Radio
FM Tuner Setting
Setting item:
Installation Status
The Installation check screen is displayed.
FM Frequency Step
SiriusXM*1
Alert Setup
Alert
Alert Delete All
Favorite Team Setup
Parental Lock
Signal Indicator
AUX*2, 5
AUX Name*3
Signal*3
HDMI*4
Bluetooth Pandora
*1
*2
*3
*4
This setting can be set when the SiriusXM source is being selected.
This setting cannot be changed while the AUX source is being selected.
This setting is only available when “AUX” is set to “On” ( ).
This setting cannot be changed while the HDMI source is being
selected.
*5 This setting cannot be set when the iDataLink module (sold separately)
is connected.
The following steps 1 to 3 are common to each “Setting
item” of Source Setup. See each section for details.
Select the desired item.
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes “Off” ( ) or “On” (
).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
Touch [
] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 16).
39-EN
Radio Setup
[Radio] is selected on the Source Setup Menu screen in step 1. See
“Source Setup” (page 39).
Setting the Alert individually for an Artist/
Song/Favorite Team
This menu option allows you to enable the Artist/Song/Team alert for
individual Artists/Songs/Teams (On or Off) or to delete individual
stored Artist/Song/Team alerts (Delete).
Setting item:
Alert Setup
Setting the TUNER (FM) Tone Quality (Tuner
Condition)
This unit can set your preferred tone quality for FM radio source.
Setting item:
FM Tuner Setting
Setting contents:
Normal (Initial setting) / HiFi / Stable
Normal:
HiFi:
Stable:
Standard setting
High-quality setting
Control noise
• Noise may be more noticeable when HiFi is set, depending on the
reception status. In this case, the Normal setting is recommended.
Setting the TUNER (FM) Frequency Step
Set to “On” ( ) to enable the alert for the Artist/Song or Team.
Set to “Off” ( ) to disable the alert for the Artist/Song or Team.
• To delete the list, touch [
] (Delete), and then touch [OK].
Setting ON/OFF of all Songs/Artists/Games
Alert
This menu option allows you to temporarily disable the Artist/Song/
Game Alerts for all Artists/Songs/Games. When the Alerts are reenabled, individual Artist/Song/Game Alert disabled in the Alert List
menu setting remain disabled.
During manual tuning, you can select the frequency step for FM analog
radio station searching.
Setting item:
Alert
Setting contents:
On / Off
Setting item:
FM Frequency Step
Setting contents:
200kHz (Initial setting) / 100kHz
If “On” ( ) is set, the alert for all stored Artists/Songs/Games is
enabled.
If “Off” ( ) is set, the alerts for all stored Artists/Songs/Games are
disabled.
SiriusXM Setup
[SiriusXM] is selected on the Source Setup Menu screen in step 1. See
“Source Setup” (page 39).
The following operations can be performed to manage the stored Songs,
Artists and Sports Teams information. (To learn about how to store the
information, see “Storing the desired Song/Artist” on page 64 and
“Setting the Favorite Sports Team Alerts” on page 41.)
Deleting all stored Alert
This operation will delete all alerts (artists, songs and teams) stored in
memory.
Setting item:
Alert Delete All
Touch [Reset] of “Alert Delete All.”
A message is displayed.
Touch [OK] to clear the information of all stored Artist,
Song, and Game alert items.
Touch [Cancel] to cancel.
40-EN
Setting the Favorite Sports Team Alerts
This menu option allows you to select your favorite teams, organized by
leagues, so that you will be alerted later when your favorite teams are
playing on other channels. Once selected, you will be alerted when
games that those teams are playing in can be heard on a SiriusXM
channel.
Setting item:
Favorite Team Setup
Setting contents:
On / Off
Touch the numeric keypad to input a 4-digit passcode.
Touch [Enter].
The initial default 4-digit passcode is set to 0000.
After entering the digit, it is displayed as “*” (asterisk).
• Touch [
] to delete an entered number.
• Touch [Delete All] to delete all entered numbers.
Setting the Lock status of individual channels
Touch [Locked Channels].
The channels list screen is displayed.
Touch [Favorite Team Setup].
Select the desired league.
Clearing the Lock of ALL the locked Channels
The display changes to the team list of the selected league.
A sports league list is displayed.
Touch the checkboxes on the Team list to set teams to
“
” (registered) or “ ” (released).
• When “ ” (registered) is set, scrolling text of the Team name,
Total registrations, and Remaining number of registration slots is
displayed for two seconds, then the team is registered as a Favorite
Team.
• When you set a team that is registered as an Alert to “ ”
(released), scrolling text for confirmation is displayed. Touch
[OK] to cancel the registration.
• The maximum number of registered Teams, Artists, and Songs is
50. For details on how to register an Artist alert or Song alert, see
“Storing the desired Song/Artist” (page 64).
When the number of registered Teams, Artist, and Songs
exceeds 50
If the total number of registered Teams, Artists, and Songs is already at
50 when “ ” (registered) is set, then scrolling text is displayed, asking
whether you want to replace a registered Artist/Song/Team with the new
one. If you want to replace one, go to step 4.
Touch [OK].
The list of registered Artists/Songs/Teams is displayed.
• If you want to cancel the registration of your Favorite Team, then
touch [Cancel], and return to step 3.
Touch the Artist, Song, or Team name that you want to
replace.
Scrolling text of the Team name, Total registrations, and
Remaining number of registration slots is displayed for 2
seconds, then the team is registered as a Favorite Team.
• For details on deleting a registered Artist, Song, or Team beforehand, to
secure a registration slot in advance, see “Setting the Alert individually
for an Artist/Song/Favorite Team” (page 40).
Setting the Parental Lock
You can lock out channels with passcode protection. Channels that are
locked cannot be accessed without entering the passcode. You can
unlock a channel or change the passcode using this menu option.
Setting item:
Parental Lock
Touch the checkboxes “On” (
) or “Off” (
channels list to set the Parent Lock Off/On.
) of the
Touch [Clear All Locked Channels].
Touch [OK] to clear the lock of all the locked channels.
Touch [Cancel] to cancel.
Changing the Lock Passcode
Touch [Edit Code].
The numeric keypad screen is displayed.
Use the keypad to enter the current (old) 4-digit
passcode.
The initial passcode is set to 0000.
• Touch [
] to delete an entered number.
• Touch [Delete All] to delete all entered numbers.
Touch [Enter] to confirm the entry.
Now use the keypad to enter the new 4-digit passcode.
Touch [Enter].
Then use the keypad to enter the new 4-digit passcode a
second time to verify it.
10 Touch [Enter].
• Remember to keep a note of the passcode in a safe place in case you
forget the code.
Signal Strength Information
While listening to a SiriusXM Channel, the Signal strength of the
current channel will be displayed.
Setting item:
Signal Indicator
This menu item displays the SiriusXM signal strength as Strong, Good,
Weak or No Signal.
• If the Signal Indicator reports Weak or No Signal and your vehicle is
parked outside with no obstructions to the southern sky, then your
SiriusXM antenna may not be properly installed or may have become
damaged.
Touch [Parental Lock].
A passcode input screen is displayed.
41-EN
AUX Setup
HDMI Setup
[AUX] is selected on the Source Setup Menu screen in step 1. See
“Source Setup” (page 39).
You can set up the items related to the Auxiliary device.
[HDMI] is selected on the Source Setup Menu screen in step 1. See
“Source Setup” (page 39).
You can set the name of an external device connected via HDMI.
Setting item:
AUX
Setting contents:
Off / On (Initial setting)
Setting item:
HDMI
Setting contents:
HDMI (Initial setting) / DVD
Off:
On:
AUX source is not displayed.
AUX source is displayed.
HDMI:
DVD:
Set when a smartphone is connected via HDMI.
Set when an external DVD player is connected.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
Audio L (White)
Audio R (Red)
Ground
Setting the Bluetooth Pandora®
[Bluetooth Pandora] is selected on the Source Setup Menu screen in
step 1. See “Source Setup” (page 39).
To use Bluetooth Pandora, set the Bluetooth Pandora setting to “On.”
Video (Yellow)
Setting item:
Bluetooth Pandora
Setting contents:
Off / On (Initial Setting)
• Please check pin-out carefully before use of this product. Depending on
the cable, there may be no picture and/or sound.
Setting the Auxiliary (AUX) Name
Make sure the AUX is set to “On” (
). See “AUX Setup” (page 42).
Setting item:
AUX Name
Setting contents:
AUX (Initial setting) / AUX DVD / GAME
Switching the Visual Input Signal System
You can make this setting only when AUX is set to “On” (
Setup” (page 42).
). See “AUX
Setting item:
Signal
Setting contents:
Auto (Initial setting) / NTSC/PAL
Auto:
NTSC/PAL:
42-EN
The video input signal type (NTSC or PAL) will be
automatically selected.
Choose the video input signal type manually.
• When “On” is set, the Bluetooth Pandora® source is displayed on the
Menu screen.
• When the current source is Bluetooth Pandora, this setting cannot be
adjusted.
System Setup
[System] is selected on the Setup main screen in step 3. See “Setup
Operation” (page 26).
Camera Setup
[Camera] is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 43).
You can set up items related to the Camera.
System Setup Menu screen
Camera
Camera Select
Camera Signal*1
Guide Adjustment*1
Setting the Camera Input
Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Rear
Off:
Rear:
Camera Interrupt (Power Mode)*1
No camera is connected
Rear camera is connected
Factory System Setup
USB/iPod / SiriusXM
Default Vehicle Screen
Maestro Module
External Accessories
External Audio Processor
External Accessory Ctrl
Smartphone Apps
Alpine TuneIt App*2
*1 When Camera Select is set to “Off,” you cannot select this item.
*2 Set this setting after closing the Alpine TuneIt App.
Setting the Camera Signal Input
When the camera is connected, the video input signal type can be
chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
Adjusting the Rear Camera Guide
You can adjust the camera guide position.
The following steps 1 to 3 are common to each “Setting
item” of System Setup. See each section for details.
Select the desired item.
Touch [Guide Adjustment].
Touch [Adjust].
Touch the guide you intend to adjust.
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes “Off” ( ) or “On” (
).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
Setting item:
Guide Adjustment
Touch [
] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 16).
The camera guide adjustment screen is displayed.
• To adjust the guide position of the Rear Camera, touch [Hitch
Guide On] or [Hitch Guide Off] to display/hide the Hitch Guide.
You can adjust the Hitch Guide to mark the position of the
junction between your vehicle and your trailer.
• If [Adjust] does not appear, proceed to step 3.
Guide line can also be selected by touching [
][
].
43-EN
Rear Camera screen example
When Hitch Guide is set to On
When Hitch Guide is set to Off
• You cannot adjust the position of the yellow guide line “
” in
the center independently.
It is controlled by a system to be the center of the two yellow guide
lines “
” and “
” on the left and right, or the central green
line “
” and red guide line “
”.
When Hitch Guide is set to On
Turning Guide Display On/Off
Turning the selected guide off.
Touch [On/Off].
To turn the guide on, touch [On/Off] again.
The currently selected guide will turn off.
• Guides that are turned off are still adjustable.
Returning Guides to Default
Touch [Default].
Touch [OK].
A message window will appear.
Adjusted values will return to default settings.
Camera Interrupt Setting (Power OFF Mode)
• You can adjust the Hitch Guide to mark the position of the junction
between your vehicle and your trailer.
Touch [
guide.
], [
], [ ] or [ ] to adjust the position of the
• Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
After the adjustment is completed, touch [Set].
Adjusting Guides Simultaneously
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is “Rear.”
Setting item:
Camera Interrupt (Power Mode)
Setting contents:
On (Initial setting) / Off
On:
Off:
The rear camera image is displayed
The rear camera image is not displayed
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
When Hitch Guide is set to Off
• Note on the yellow guide line “
” in the center
The yellow guide line “
” in the center is controlled by a system that
locates it in the center of the two yellow guide lines, “
” and “
”
on the left and right, or the green line “
” on the top and red guide
line “
” below. Therefore you cannot move it manually.
44-EN
Factory System Setup
[Factory System Setup] is selected on the System Setup Menu screen in
step 1. See “System Setup” (page 43).
Setting the Source Category
You can set whether the following source icon in the Menu screen is
available.
Setting item:
USB/iPod (Initial setting: Both) / SiriusXM (Initial setting: Aftermarket)
Setting contents:
Both / Factory / Aftermarket
Both*:
Factory:
Aftermarket:
Both the sources listed above from this unit and
iDataLink module are available.
Only the source listed above from iDataLink module is
available.
Only the source listed above from this unit is available.
* USB/iPod only.
• The iDataLink source icons not displayed on the Menu screen when no
iDataLink module is connected even though “Both” or “Factory” is set.
• You cannot set the source that is currently being played.
Setting the Default Vehicle Screen
Press and hold the
(Favorite) button for at least 2 seconds or touch
the Menu screen (page 18) to display the Info mode screen, and then set
the following.
Setting item:
Default Vehicle Screen
Setting contents:
Climate / Vehicle Info. / Gauges / Parking Assist / Last mode (Initial setting)
• Depending on the car, some setting contents or this setting item may not
be displayed.
Setting the Maestro Module
You can change the setting of the connected iDataLink module.
External Accessories Setup
[External Accessories] is selected on the System Setup Menu screen in
step 1. See “System Setup” (page 43).
Setting the External Audio Processor
When using an external audio processor, set to “On” (
).
Setting item:
External Audio Processor
Setting contents:
Off (Initial setting) / On
• When this setting is “On,” the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-Over/Time Correction/Defeat/Phone Speaker/
Default Sound Settings are set to “Off ” or “Flat” and cannot be
adjusted.
• Use the External Audio Processor to adjust volume.
Setting the External Accessory Control
When you have connected the optional External Accessory Control
module, set this setting to “On” to turn the headlights ON/OFF or adjust
the air suspension from this unit.
Setting item:
External Accessory Ctrl
Setting contents:
Off (Initial setting) / On
• When set to “On,” the [Ext Acc Ctrl] icon is displayed on the Menu
screen.
• For details on the External Accessory screen and its operation, see
“External Accessory Control Operation” (page 80).
Setting item:
Maestro Module
• Depending on the iDataLink module, the setting contents may differ.
45-EN
Smartphone Apps Setup
[Smartphone Apps] is selected on the System Setup Menu screen in step
1. See “System Setup” (page 43).
Set Alpine TuneIt App to USB (iPhone) when an iPhone is connected, or
set to Bluetooth (Android) when an Android Smartphone is paired.
Setting item:
Alpine TuneIt App*1
Setting contents:
Off / USB (iPhone) (Initial setting) / Bluetooth (Android)*2
Off:
No Smartphone is connected.
USB (iPhone): When an iPhone is connected to the unit’s USB port, you
can program the unit’s sound tuning parameters, or
communicate with SNS.
Bluetooth
Set this when an Android Smartphone is paired with this
(Android):
unit via Bluetooth technology. And after Bluetooth
Audio is connected, you can program the unit’s sound
tuning parameters, or communicate with SNS.
• Set this setting after closing the Alpine TuneIt App.
• For this function to work properly, specific applications must be
installed on your Smartphone before connection. Consult your Alpine
dealer or the Alpine website for details.
• Only the iPhone and certain Android Smartphones support this
function.
*1 Set this setting after closing the Alpine TuneIt App.
*2 Not displayed when Bluetooth is set to Off. For details, see “Bluetooth
Setup” (page 27)
46-EN
Apple CarPlay
(Optional)
Apple CarPlay is a smarter, safer way to use your iPhone in the car.
Apple CarPlay takes the things you want to do with your iPhone while
driving and puts them right on the unit. You can get directions, make
calls, send and receive messages, and listen to music, all in a way that
allows you to stay focused on the road. Just plug in your iPhone to
the unit and go.
• Before using this function, plug in your iPhone using Lightning to USB
Cable (Supplied with iPhone) to the unit.
• Some functions may not be available while driving.
• About iPhone models usable with this unit, see “iPod/iPhone
(Optional)” (page 55). Only an iPhone 5 or later compatible with Apple
CarPlay function.
Access to Apple CarPlay
Press the
(MENU) button.
The Menu screen is displayed.
Touch [Apple CarPlay].
The Apple CarPlay mode is activated.
Touch the desired App icon on the unit, or use Siri function by
pressing button.
• When a used iPhone 5 or later is reconnected, touch the pop-up
message-“Apple CarPlay connected.” within 5 seconds to access to Apple
CarPlay screen, or you can ignore prompt by touching [ ] on the top
right.
• The App must be Apple CarPlay compatible in order to appear in the
Home screen.
Android Auto
(Optional)
What is Android Auto
Android Auto is designed to make it easier to use apps from your phone
while you’re on the road. Navigate with Google Maps, listen to playlists
or podcasts from your favorite apps, and more.
Activate Android Auto
Download the Android Auto App from the Google Play store before
continuing.
Just plug in your smartphone to the unit’s USB connector, then follow
the prompt to pair your smartphone with the unit.
• The connected smartphone with Android Auto will disconnect other
phone’s Bluetooth connection and pair to the unit.
Press the
Touch [Android Auto].
(MENU) button.
The Menu screen is displayed.
The Android Auto screen is displayed.
• When a used smartphone is reconnected, touch the pop-up
message-“Android Auto connected” within 5 seconds to access to
Android Auto screen, or you can ignore prompt by touching [ ]
on the top right.
• You can make a call, use voice recognition function and Android
Auto’s compatible navigation app, etc,.
• Only Google approved apps with necessary driver-safety measures
in place can be used.
47-EN
Radio/HD Radio™/
RBDS
The unit can receive HD Radio broadcasting signals based on digital
radio broadcast standards, in addition to analog radio broadcasts using
RBDS.
HD Radio broadcasting signals are broadcast in the service areas of the
current AM/ FM broadcasters where they provide digital audio
distribution and data services. This unit receives the above digital
broadcasts for your high-quality sound enjoyment.
Depending on the signal strength in TUNER mode, the unit will
automatically switch between digital signals if they can be received, and
analog radio using RBDS if digital signals cannot be received. For
details, please see “Switching between Digital and Analog,” “Forced
Analog Mode.”
• RBDS mode is only available during FM broadcast reception.
This unit is able to receive signals based on the terrestrial digital radio
broadcasting standard.
When current AM/FM broadcasters are transmitting digital audio and
data services, HD Radio broadcasting signals are on-the-air in their
service area. You can receive their digital broadcast and enjoy high
quality sound.
If there is no HD Radio broadcasting signal in the current area, after
10 seconds, this unit will switch to receive the RBDS Radio signal
automatically. However, the display is still HD Radio Technology mode
screen.
Info area
RBDS
Station Info. mode:
Program Type /Frequency and PS Name/Artist Name/Song
Name/Album Name
Radio Text mode:
Frequency/ Radio Text
• For details on switching the display of the Radio text, see
“Displaying Radio Text (RBDS FM Radio mode only)” (page 50).
HD Radio Technology
Station Info. mode:
Short Station Name/Frequency/Artist Name/Song Name/
Album Name
Artwork etc./Station Logo display*1
Preset mode button
Swipe to the right when you use the Preset mode screen.
*1 HD Radio™ mode only.
*2 Lights during multicast reception. (Displays the LIVE Indicator when
the Ballgame Mode is set to “On”.)
Preset mode screen example
HD Radio main screen example
Preset button
Swipe vertically in the list to change pages.
Program Type list button (RBDS FM Radio mode only)
Swipe to the right when you use the Program Type list screen.
Function mode
HD Radio Indicator *1
Band display
Displays the band of the signal currently being received.
Multicast Indicator*2
Lights during multicast reception.
48-EN
Radio Basic Operation
Listening to the Radio
Press the
(MENU) button and select radio mode.
The display shows the radio mode screen.
• You can select and change the source in the Favorite screen
(page 21).
Touch [
Presetting Stations Manually
].
].
Repeat the procedure to store up to 11 other stations
onto the same band.
To use this procedure for other bands, simply select the desired
band and repeat the procedure.
A total of 36 stations can be stored in the preset memory
(12 stations for each band; FM1, FM2, or AM).
Select the desired band from FM1/FM2/AM.
The tuning mode selection popup is displayed.
• [
] button displays the current selected mode. (e.g. [DX Seek])
Touch the Preset number you want to store, for at least
2 seconds.
The selected station is stored.
The radio band select pop up screen is displayed.
• [ ] button displays the current selected band. (e.g. [FM1])
Touch [
Tune in a desired radio station you wish to store in the
preset memory by manual or automatic seek tuning.
• For details on switching to the Preset mode screen, see
in “HD
Radio main screen example” (page 48).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Touch the desired tuning mode.
The radio frequency up or down button changes depending on
the tuning mode.
DX Seek
Local Seek
D.DX Seek
D.Local Seek
Presetting Stations Automatically
The tuner can automatically seek and store 12 strong stations in the
selected band in ascending order of frequency.
Manual
Program
Type
• There are two modes you can select for auto tuning, DX and Local:
- DX Seek (Distance) mode*;
Both strong and weak stations will be tuned in.
- Local Seek mode*;
Only strong stations will be tuned in.
The initial setting is DX.
- D (Digital).DX Seek mode;
Automatically receives a receivable digital broadcast.
- D (Digital).Local Seek mode;
Automatically receives a strong digital broadcast only.
- Manual mode;
The frequency is manually tuned in steps
- Program Type Seek mode (RBDS FM Radio mode only);
The currently selected program type station will be tuned.
• During Forced Analog mode, digital broadcasts cannot be
received.
Select the desired band then touch and hold [
Preset).
The tuner automatically seeks and stores 12 strong stations into the
preset buttons in ascending order of frequency.
When automatic storing has completed, the station stored in the
preset 1 is selected.
• If no stations are stored, the tuner will return to the original station you
were listening to before the automatic storing procedure began.
• You can cancel this process by touching [
] (Auto Preset) while the
tuner is automatically seeking stations. Canceling will return the tuner
preset to the previous setting.
Tuning to Preset Stations
You can tune in the preset stations in memory on either band using its
preset number.
* Depending on the signal, a digital or analog broadcast is received.
Touch [
], [
] or [
], [
] to change the radio
frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
• The
buttons provide the same functions above.
] (Auto
Touch [
].
The radio band select pop up screen is displayed.
• [ ] button displays the current selected band. (e.g. [FM1])
Select the desired band from FM1/FM2/AM.
Touch any one of the Preset numbers you have already
stored in the Preset mode screen.
The preset station is received.
• For details on switching to the Preset mode screen, see
Radio main screen example” (page 48).
in “HD
49-EN
Inputting Frequency Directly and Receiving the
Radio Station
Selecting the Receivable Program Type (RBDS
FM Radio mode only)
You can input a frequency of the same band directly and receive the
radio station.
You can select and receive the currently receivable stations in the
Program Type list screen.
Touch [
Touch a desired number.
] (Direct Tune).
Program Type list screen example
The numeric keypad input mode screen appears.
• For details on switching to the Program Type list screen, see
“Preset mode screen example” (page 48).
Touch [
] to delete an entered number.
Touch [Delete All] to delete all entered numbers.
Touch [Enter] on the numeric keypad mode screen to
confirm your selection.
Touch [
] to hide the keypad display.
Select the desired program type in the Program Type list
screen.
Program Type Seek starts and the receivable program type is
received.
If no Program Type station is found, “No program type available.” will
be displayed.
Receiving a Multicast (HD Radio™ Mode only)
• Touch [ ] or [ ] to select the same program type station as the
currently selected program type after switching the tuning mode to
Program Type (Program Type Seek) mode.
Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of 8 multicast station channels can be selected on
this unit.
Forced Analog Mode
• “Multicast” indicator appears when signal reception is possible.
• The station number of the current broadcast station appears behind the
frequency (ex. 90.3 MHz-HD5 means there are 5 stations on
90.3 MHz).
Touch [
Touch [
], [
] or [
], [
].
The sub channel of the received radio station is changed.
• If reception is lost during SPS broadcasting due to weak or no signal, the
screen will display “HDx Signal loss.”
Activate the Compulsory Analog Radio mode to receive only analog
radio signals.
] (Analog).
The [
] (Analog) button is highlighted. To cancel Compulsory
Analog Radio mode, touch [
] (Analog) again.
• During Forced Analog mode, only analog broadcasts will be received
even when digital broadcasts become available.
Displaying Radio Text (RBDS FM Radio mode
only)
Text messages from a radio station can be displayed.
Tune in a radio station that transmits text messages.
Touch [ ] (Info) in the FM radio mode repeatedly to
switch to the desired display.
Station Info.Mode
Radio Text Mode
Station Info.Mode
Station Info. Mode
Program Type /Frequency and PS Name/Artist Name/Song
Name/Album Name
Radio Text Mode
Frequency/Radio Text
50-EN
in
Using Ballgame Mode (HD Radio™ Mode only)
In live broadcast, such as sportscasts, etc., a time lag occurs between
digital sound and analog sound. Therefore, when live broadcasts are
received, a time lag between the real broadcast may occur and the unit
can change to analog broadcasting automatically.
Touch [
] (Live) to switch On/Off.
LIVE Indicator
The LIVE Indicator is displayed when Ballgame Mode is set to “On.”
• When receiving a live broadcast while the Ballgame mode is on, the
LIVE indicator is highlighted.
(During live broadcast)
About the Feature Logos
• Digital, CD-quality sound. HD Radio Technology enables local
radio stations to broadcast a clean digital signal. AM sounds like
today’s FM and FM sounds like a CD.
• Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name, artist,
station IDs, HD2/HD3 Channel Guide, and other relevant data
streams.
• Adjacent to traditional main stations are extra local FM channels.
These HD2/HD3 Channels provide new, original music as well as
deep cuts into traditional genre.
• Visual information related to content being played on your HD
Radio receiver, such as Album Art, historical photographs, still
art from live broadcasts, among other related content.
51-EN
USB Flash drive
(Optional)
USB Video main screen example
You can play back music files (MP3/WMA/AAC/FLAC) and video files
(AVI/MKV/MP4) stored in a USB flash drive on the internal player of
this system.
WARNING
It is dangerous for the driver to watch video while driving
the vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Install the unit correctly so that the driver cannot watch a
video unless the car is stopped and the parking brake is
applied.
If the unit is not installed correctly, the driver will be able
to watch a video while driving and may be distracted
from looking ahead and cause an accident. The driver or
other people could be severely injured.
USB Audio main screen example
Artwork display
• You can change the artwork position. For details, see “Switching
the Artwork Position” (page 37).
Current track no./Total song no.
Artist title
Song title
Album title
Elapsed time
Info mode switching button
Info mode display
File Name
Quick Search button
Touch or swipe to the right to use the Quick Search mode.
Quick Search mode screen example
Swipe right vertically in the list to change pages.
Function mode
Full Search mode button
Swipe to the right when you use the Full Search mode screen.
The USB Video operation screen display during video file
playback
Touch the screen while the USB Video playback screen is
displayed.
The USB Video operation screen is displayed.
• The operation screen changes to the visual screen in the USB Video
mode for 5 seconds after an operation has been performed.
• For your safety, video is not displayed and only audio can be heard
while driving.
52-EN
Playback
Stopping Playback (USB Video only)
Press the
(MENU) button and select USB mode.
The display shows the USB mode screen.
• You can select and change the source in the Favorite screen
(page 21).
Touch [
] or [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
• The
“STOP” indicator is displayed, and playback stops.
• Playback starts from the beginning when [
playback is stopped.
Repeat Play
Touch [
Select your desired Repeat mode.
buttons provide the same functions above.
To pause playback, touch [
].
Touching [
] again will resume playback.
During playback, the [ ] indicator is displayed in Audio main
screen. During a pause, the [ ] indicator is displayed in the
Audio main screen.
Random Play (USB Audio only)
Touch [
Select your desired Random Play mode.
Fast-forwarding/Fast-reversing (USB Video
only)
ALL
File
OFF
During playback, touch and hold [
] (Fast-reverse) or
touch and hold [
] (Fast-forward).
Touch and hold for more than 1 second to forward/reverse at 8x
speed. Keep touching to switch the speed to 16x and 32x.
Release [
] or [
] to return to normal playback.
• No sound is played back during fast-forwarding/fast-reversing.
].
The Random Play mode select pop up screen is displayed.
• The [
] button displays the currently selected mode.
Folder
].
The Repeat mode select pop up screen is displayed.
• The [
] button displays the currently selected mode.
Folder
:Only files in a folder are repeatedly played back.
File
: Only the file currently playing is repeatedly played back.
OFF
: Repeat mode Off.
].
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC/FLAC file contains ID3 tag/WMA tag
information, the ID3 tag/WMA tag information is displayed. (e.g., song
name, artist name, and album name)
] is touched while
] or to select the desired track (file).
Returning to the beginning of the current (or previous) track (file):
Touch [
].
Fast reverse :
Touch and hold [
Touch [ ] during playback.
: All songs in the USB flash drive are played back in
random sequence. Any one song does not play back
again until all songs have been played back.
: A Folder is selected randomly and songs in the Folder
are played back in order. After all songs are played in a
Folder, the next Folder is selected randomly.
: All songs in the Folder (Folder/File) including the song
currently being played are played back in random
sequence.
: Random mode Off.
• If you select a track by using the search mode, the Random Play mode
will be canceled.
Searching for a Desired Song
You can search for your desired song by using one of two modes; the
Quick Search mode and the Full Search mode.
Quick Search mode
Touch your desired Folder name or File name.
The selected Folder*1 or File is played.
*1 The first file in the selected folder is played back.
• For details on switching to the Quick Search mode, see
Audio main screen example” (page 52).
in “USB
53-EN
Full Search mode
Touch [Audio] or [Video] to switch whether the search
list displays music files or video files.
Touch your desired Folder name*2 or File name.
When you select a File name, the selected song is played.
When you select a Folder name, repeat the same procedure to select
another Folder name or File name.
*2 When you touch the [ ] by a Folder name, the unit plays from the first
song in the Folder.
• For details on switching to the Full Search mode, see
in “Quick
Search mode screen example” (page 52).
• To switch the displayed list or return to the previous page in the Full
Search mode, see “About Basic Operation for List Screen” (page 16).
Switching Display Modes (During Video File Play
Back)
You can switch the Display Mode while playing a Video File.
Touch [
].
Each time you touch, the Display Mode is switched.
Fit
Fill
Fit
• The [
] button displays the currently selected mode. (e.g. [Fit])
• You cannot operate them while driving.
Fit mode
The mode displays a picture while holding its aspect ratio.
• Black bands appear at the top/bottom or right/left side of the screen
depending on the picture.
Fill mode
The mode displays a picture to fit its size vertically and horizontally
with the monitor size.
About USB Video format
The video formats (USB Flash drive) supported by the unit are as
follows.
- Supported Container: AVI, MKV, MP4
- Supported Video Coding: H.264/MPEG-4 AVC
- Supported Audio Coding: MP3, ACC, MPEG2 audio
- MAX File Size: 4GB
54-EN
iPod/iPhone
(Optional)
A separately sold Lightning to USB cable (KCU-471i), etc., is required.
When the unit is connected by the above cable, the controls on the iPod
are disabled.
• This unit does not support video playback from iPod/iPhone which
connected to this unit via USB Connector.
• Internet or telephone functions, etc., of the iPhone or iPod touch are not
controllable from the unit, but these functions can be controlled using
the iPhone or iPod touch itself.
About iPod/iPhone models usable with this unit
• The following devices have been tested and shown to work with
this unit. Correct function of earlier versions cannot be
guaranteed.
iPod touch 6th generation: Ver.10.1.1
iPod touch 5th generation: Ver.9.3.5
iPod nano 7th generation: Ver.1.0.4
Function mode
Artwork display
• You can change the artwork position. For details, see “Switching
the Artwork Position” (page 37).
Current song no./Total song no.
Artist title/Release Date*1
Song title/Episode title*1
Album title/Podcast title*1
Total time for playing
Elapsed time
Quick Search button*2
Touch or swipe to the right when using Quick Search mode.
*1 Podcast mode.
*2 If you have never used Search mode with the currently connected iPod/
iPhone, pressing the Quick Search button switches the screen to the Full
Search mode screen.
Quick Search mode screen example
Swipe vertically in the list to change pages.
• The following devices have been tested and shown to work with
this unit. Correct function of earlier versions cannot be
guaranteed.
iPhone SE: Ver.10.1.1
iPhone 6S Plus: Ver.10.1.1
iPhone 6S: Ver.10.1.1
iPhone 6 Plus: Ver.10.1.1
iPhone 6: Ver.10.1.1
iPhone 5S: Ver.10.1.1
iPhone 5C: Ver.10.1.1
iPhone 5: Ver.10.1.1
iPhone 4S: Ver.9.3.5
iPod/iPhone main screen example
Full Search button
Swipe to the right when using Full Search mode.
Audio mode
55-EN
Quick Search Mode
Playback
Press the
Touch [
(MENU) button and select iPod mode.
The display shows the iPod mode screen.
• You can select and change the source in the Favorite screen
(page 21).
] or [
] or to select the desired track (file).
Returning to the beginning of the current (or previous) track (file):
Touch [
].
Fast reverse the current track :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
The selected Album is played.
• To switch into Quick Search mode, see
in “iPod/iPhone main screen
example” (page 55).
• To search within an Album, go to the Full Search mode.
For example: Searching by Artist name
buttons provide the same functions above.
To pause playback, touch [
In Quick Search mode, touch the desired list (for example,
Album list).
Full Search Mode
Fast forward the current track :
Touch and hold [
].
• The
In Quick Search mode, the list from the previous search mode is
displayed. For example, if the last time you searched for songs was is in
Albums, the Album list is displayed. If you have not used the search
mode, the list is not displayed in the Quick Search mode. In this case, go
to the Full Search mode.
].
The following example explains how an Artists search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
• If a song is playing on the iPod/iPhone before it is connected to the unit,
it will continue playing when it is connected.
• An episode may have several chapters. The chapter can be changed by
touching [
] or [
].
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the unit.
Therefore, a maximum of 64 characters is recommended. The
maximum number of characters for the unit is 64.
• Some characters may not be correctly displayed.
Searching for a Music File
An iPod/iPhone can contain thousands of songs. For this reason, this
unit can make various searches using the search function as shown
below.
Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/
Song/iTunes Radio search mode’s individual hierarchy, you can narrow
down your search as shown in the table below.
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlists
Songs
—
—
Artists
Albums
Songs
—
Albums
Songs
—
—
Songs
—
—
—
Podcasts
Episodes
—
—
Genres
Artists
Albums
Songs
Composers
Albums
Songs
—
Audiobooks
—
—
—
iTunes Radio
—
—
—
The Artists search screen is displayed.
• To switch into Full Search mode, see
screen example” (page 55).
in “Quick Search mode
Select the desired artist.
To play back the Artist directly
1 Touch [ ] of the artist’s name.
All songs of the selected artist are played back.
Hierarchy 1
Touch [Artists] in the Full Search mode screen.
To search for the Album of the Artist
1 Touch the selected artist name.
The Albums search screen of the selected artist is displayed.
2 Touch [ ] of the desired album’s name.
All songs of the selected album are played back.
To search for a Song in the Album of the Artist
1 Touch the desired artist’s name.
All albums of the selected artist are displayed.
Touch the desired album’s name.
Touch the desired song’s name.
All songs of the selected album are displayed.
The selected song is played back.
• An alphabet skip function is available. See “Alphabet Search Function”
(page 57).
• To switch the displayed list or return to the previous page in the Full
Search mode, see “About Basic Operation for List Screen” (page 16).
56-EN
Alphabet Search Function
Repeat Play
The unit is provided with an alphabet search function for effective
searching. When you use this function in the search mode, you can
quickly search an artist or a song, etc.
This is an example of how to search Artist Name for names beginning
with “R”.
Touch [
Touch “O-U” of the alphabet group.
] to repeatedly play back the currently track.
The tracks (files) will be played repeatedly.
Touch [
] again to deactivate Repeat play.
Repeat All
Track Repeat
Touch [
Select your desired Random Play mode.
].
The Random Play mode select pop up screen is displayed.
• The [
] button displays the currently selected mode.
The selected Random Play mode changes the button.
“O P Q R S T U” of the alphabet group “O - U” is displayed.
Touch “R” you want to search.
Repeat All
Random Play (Shuffle)
Album
OFF
Songs
Artist names beginning with “R” are displayed.
OFF
The songs on each album are played back in
proper order. Upon completing of all the songs on
the album, the next album is selected randomly.
This continues until all albums have been played.
Song shuffle randomly plays back songs within a
selected category (playlist, album, etc.). The songs
within the category are played just once until all
songs have been played.
Random mode Off.
• The action depends on the connected iPod.
Touch your desired artist name.
• If there are no names in the list beginning with that letter, the next letter
of the alphabet is searched.
For example: If there are no names beginning with “R,” the search list
begins with “S.”.
57-EN
Pandora® internet
radio (optional)
Function mode
Pandora® internet radio is your own FREE personalized radio now
available to stream music on your Smartphone (which runs Android OS
or iOS).
Just start with the name of one of your favorite artists, songs or classical
composers and Pandora® will create a “station” that plays their music and
more music like it.
The unit enables you to interact with your Pandora® account by
connecting an iPhone or Android smartphone that has the latest version
of the Pandora® application installed.
• You can enjoy Pandora® from Apple CarPlay screen.
• If no sound is output when you connect an iPhone with a “Set Bluetooth
Device” setting of both “Hands-free” and “Bluetooth Audio” to the unit’s
USB port and change the Audio source from Bluetooth Audio, set
“Alpine TuneIt App” to “USB (iPhone)” or “Off.” For more details, see
“Pairing a Bluetooth Device” (page 27) and “Smartphone Apps Setup”
(page 46).
iPhone Pandora main screen example
Track/Artist bookmark icon/QuickMix indicator
Station name
Artist Name
Song Name
Album Name
Playing time
Artwork display
Listening to Pandora®
Launch the Pandora® on the smartphone.
Press the
(MENU) button and select Pandora® or
Bluetooth Pandora® mode.
The display shows the Pandora mode screen.
• You can select and change the source in the Favorites screen
(page 21).
Function mode
Bluetooth Pandora main screen example
58-EN
To pause playback, touch [
].
To skip to the next song, touch [
].
• The operation to replay a previous song is not available.
• Pandora® limits the number of skips allowed on their service. If you
attempt to skip songs beyond the limit, “You’ve reached your skip limit.”
is displayed.
• Even if you reconnect an iPhone without launching Pandora
Application while the power is off, Pandora mode (not iPod mode) is
displayed when power is turned back on.
• Depending on the signal status, song may be stopped during playback.
• While receiving an advertisement, you cannot operate any buttons
other than [
] (play/pause) and [ ] (Search).
• The playback time may not be correctly displayed.
• The display content varies when ads are received.
“Thumbs” Feedback
Creating a New Station
You can personalize your stations with “Thumbs Up” or “Thumbs
Down” feedback, which the system takes into account for future music
selections.
Basing on the currently playing song or artist, a personalized Pandora
station can be created. The new station will play more music like it.
During playback, touch [ ] for thumbs up, or touch [ ] for
thumbs down.
The “ ” indicator appears in the display. Pandora® will
add similar music to your station.
The “ ” indicator is displayed. Pandora® will ban that
song from your station, and the current song is skipped.
If the number of skips allowed has reached its limit, the
current song continues to play back.
• In some situations, “Thumbs” feedback may not be available.
Searching for a Desired Station
You can display your station list and select stations directly from the
unit.
Touch [
] (Search) to activate the Search mode.
Alphabet Search
Touch [By A-Z].
Touch the desired station.
The “By A-Z” search mode is activated and the station names are
listed alphabetically.
Pandora will play that station.
Search by Date Added
Touch [By Date].
The “By Date” search mode is activated and the station names
are listed by the date they were added to the account.
Free word
During playback, touch [
] (New Station).
The Key Pad screen is displayed. You can enter a keyword and
search for Artist/Song.
Enter a keyword and touch [OK].
Touch the desired list.
The new station is automatically applied.
• For details of how to input characters from the keypad, refer to “How to
Input Characters and Numbers (Keypad)” (page 20).
• You cannot operate them while driving.
Artist/Track
During playback, touch [
] (Artist) or [
] (Track).
• The created station is saved to your station list.
• When the Smartphone is not connected to this unit, you can create
personalized Pandora® stations using the Pandora® Application on your
Smartphone. You can also create stations on the web at
www.pandora.com.
• In some situations, creating a new station may not be available.
• You cannot perform this operation while driving.
Bookmarking a Desired Track or Artist
The currently playing song or artist can be bookmarked and saved to
your Pandora account.
During playback, touch [
] (Artist) or [
] (Track).
The current track or artist is bookmarked. “ ” icon or “
displayed.
” icon is
Touch the desired station.
Pandora will play that station.
QuickMix
Use QuickMix to create a playlist based on two or more of your Pandora
stations. Edit your QuickMix station selections on the Pandora
Compatible Application for iPhone when it is not connected to the unit.
Touch [
Touch [
] (Search) to activate the Search mode.
The “By A-Z” or “By Date” search mode is activated and the
station name is displayed.
• Your bookmarks can be viewed on your “Profile” page at
www.pandora.com.
• In some situations, bookmarks may not be available.
] (QuickMix).
• The
indicator lights, and the songs from the created stations are
played back in random sequence.
59-EN
Connecting a Bluetooth Device (Bluetooth
Pandora® Only)
Registering a Bluetooth device in the unit enables automatic connection.
If it does not connect automatically, run through the connection
procedure again.
Touch [
Touch [Reconnect].
] (Settings).
The Device Setting select pop up screen is displayed.
Bluetooth connection will start.
Disconnecting the Bluetooth Connection
Touch [
Touch [Disconnect].
] (Settings).
The Device Setting select pop up screen is displayed.
The Bluetooth connection is disconnected.
Changing the connecting Bluetooth Device
If multiple Bluetooth devices are registered in this device, you can
change the connection among the registered devices.
Touch [
] (Settings).
Touch [Change].
Touch [
device.
] (Audio) or [
] (Hands-free) of the selected
The connection will transfer to the selected device.
60-EN
SiriusXM Satellite
Radio Operation
(Optional)
SiriusXM Tuner operation:
When an optional SiriusXM Tuner is connected to this unit, the
following operations may be performed.
SiriusXM main screen example (Song Info. Mode)
< During Replay mode >
Signal Indicator
Indicates the signal strength of SiriusXM.
Info area
Channel Info. Mode*:
Channel No/Long Channel Name/Category Name
Song Info.Mode:
Artist Name/Song Name/Content Info
Album Art
The image that corresponds with the channel currently being
received is displayed.
• You can change the artwork position. For details, see “Switching
the Artwork Position” (page 37).
Preset mode button
Touch or swipe to the right when you use the Preset mode
screen.
* In Channel Info. Mode, the Channel logo currently being received is
displayed on the left side of the Long Channel Name.
Preset mode screen example
Function mode
The Function mode switch is different depending on TuneStart mode
and Replay mode.
< When TuneStart mode is not using >
Preset buttons
Swipe vertically in the list to change pages.
SmartFavorites (
< When TuneStart mode is using >
) button
“ ” is a symbol of SmartFavorites channel. When a preset
channel is stored, it will be designated as a SmartFavorites
channel and the button lights up. Touch this button to cancel
the SmartFavorites channel and
is displayed.
Search mode button
Swipe to the right when you use the Search mode screen.
61-EN
Receiving Channels with the SiriusXM Tuner
Select the desired channel.
About SiriusXM Satellite Radio
Changing the Display
Only SiriusXM® brings you more of what you love to listen to, all in one
place. Get over 140 channels, including commercial-free music plus the
best sports, news, talk, comedy and entertainment. Welcome to the
world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are
required. For more information, visit www.siriusxm.com.
Text information, such as the channel name, artist name/feature, and
song/program title, is available with SiriusXM. The unit can display this
text information as explained below.
After you have found the SiriusXM Radio ID, you can activate your
radio. See section “Checking the SiriusXM Radio ID Number.”
In the USA, you can activate online or by calling SiriusXM Listener
Care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635‐2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call XM Customer Care at 1‐877‐438‐9677
• The SiriusXM Satellite Radio controls on this unit are available only
when a SiriusXM Tuner is connected.
Press the
(MENU) button and select SiriusXM mode.
The display shows the SiriusXM mode screen.
• You can select and change the source in the Favorite screen
(page 21).
Touch [ ] or [ ] to select the desired channel. Touching
and holding either button will rapidly browse through
the channels.
Touch [
] (Info).
Each time you touch this button, the Channel Info. mode and the
Song Info. mode switch alternately. For displayed contents, see
“SiriusXM main screen example (Song Info. Mode)” (page 61).
Checking the SiriusXM Radio ID Number
To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. You can check
the Radio ID on the bottom surface of the SiriusXM Tuner box. You can
also check it from this unit by performing the following procedure.
While receiving SiriusXM Radio, touch [
select channel “0”.
] or [
] to
The unit displays the Radio ID number.
To cancel the Radio ID number display, change the
channel to a channel other than “0”.
• The SiriusXM Radio ID does not contain the letters I, O, S, or F.
• Refer to the SiriusXM Tuner User Guide for details on how to install the
SiriusXM Tuner.
Storing Channel Presets
Tuning Channels by Category
You can store 18 of your favorite SiriusXM channels for easy recall with
Preset buttons.
Channels are grouped into categories based on the type of content heard
on the channels.
Press the Preset number you want to store, for at least
2 seconds to store the channel.
The selected channel is designated as a SmartFavorites channel.
Touch [
] (Category) on the SiriusXM main screen to
activate the category browsing mode.
The channels within the category of the current channel are
listed.
Category browsing mode screen example
Repeat the procedure to store up to 17 other channels.
A total of 18 channels can be stored in the preset memory.
• For details about SmartFavorites channels, see “SmartFavorites
Functions” (page 63).
• To switch to the Preset mode screen, see
in “SiriusXM main screen
example (Song Info. Mode)” (page 61).
• If you store a new channel into a preset which already has a channel
assigned, the current channel will be cleared and replaced with the new
one.
Tuning Channels using Presets
Touch any one of the Preset numbers you have already
stored in the Preset mode screen.
The preset channel is received.
• Touching [ ] (Info) changes the display of information for the
channels in the category with the following three options.
Channel No./Channel Name
Channel No./Artist Name
Channel No./Song Title
Channel No./Content Info
Channel No./ Channel Name
Touch [
] (Category Up) or [
] (Category Down)
on the category browsing mode screen to select a
desired category.
The Category Name is shown at the top of the display.
62-EN
• To switch to the Preset mode screen, see
example (Song Info. Mode)” (page 61).
in “SiriusXM main screen
1
SmartFavorites Functions
SmartFavorites allow you to rewind and replay any missed
programming from your current Band of Preset channels. Miss a music,
news, talk or sports segment? No Problem, because you can rewind and
replay when you tune to one of your SmartFavorites channels and hear
what you missed. Note that buffering starts 5 seconds after changing the
band. It takes 5 seconds for SmartFavorites to start buffering the preset
channels in the new band. TuneScan and TuneStart functions are
enabled by the above-mentioned SmartFavorites functionality.
TuneStart™ Function
With the TuneStart™ feature turned ON, you will hear the beginning of
the song when you tune to one of your SmartFavorites channels. It may
take a minute or two for the feature to work after power up or after
changing preset bands.
Touch and hold [
] (TuneStart) for at least 2 seconds
to activate or deactivate the TuneStart function.
When the TuneStart function is activated, [
highlighted.
Touch [
The [
mode.
] (TuneScan).
] (TuneScan) icon is highlighted during TuneScan
Touch [
] (TuneScan) during scan playback,
TuneScan mode will be canceled and the selected track
will be played back normally.
Touch and hold [
] (TuneScan) for at least 2 seconds during
scan playback to cancel TuneScan mode. The tuner returns to
the channel before TuneScan was initiated.
• This function is available only when SiriusXM Tuner-SXV200 or later
is connected. When Tuner-SXV200 is connected, this function is
available only for Preset channels 1-6. When Tuner-SXV300 is
connected, this function is available for all Preset channels.
• If no operation is performed during the scanning process, when
scanning finishes, the next mode depends on the SiriusXM Tuner.
• During TuneScan mode, the artist and song name will be displayed.
• The SiriusXM Tuner scans through the songs from the preset music
channels on the current band only, scanning from oldest to newest.
• The number of Preset channels and the play times that can perform
TuneScan differ depending on the SiriusXM Tuner box.
] (TuneStart) is
On the Preset Mode screen, touch the Preset number.
TuneStart mode will begin.
Search Function
Touch the
screen.
Search mode button on the Preset mode
The Search list screen appears.
• To switch into Search mode, see
in “Preset mode screen
example” (page 61).
Search item:
All Channels / Category Name*1 / My Music / My Games /
Featured*2
*1 The Category name for the channel currently being received is
displayed.
*2 Displayed only when the SiriusXM Tuner-SXV200 or later is
connected.
During TuneStart mode, the time difference between the play
point and Live radio is displayed by the “
” indicator.
• To switch to the Preset mode screen, see
in “SiriusXM main screen
example (Song Info. Mode)” (page 61).
• The number of preset channels that TuneStart can access differs
depending on the SiriusXM Tuner Box.
• Touching [
] (Track Up) or [
] (Track Down) will move a track
up/down.
• To fast reverse, touch and hold [
] (Track Down) and to fast
forward, touch and hold [
] (Track Up).
• When you touch [
] (Live) or [
] (TuneStart) during
TuneStart, the program currently selected in TuneStart mode changes to
the program currently being broadcast.
• This function is available only when SiriusXM Tuner-SXV200 or later
is connected. When Tuner-SXV200 is connected, this function is
available only for Preset channels 1-6. When Tuner-SXV300 is
connected, this function is available for all Preset channels.
• Preset channels that play other than music-type content will start
playing the channel from the current live play point when selected.
TuneScan™ Function
If you’ve got more than one Favorites music channel, you’ve got a lot of
choices every time you tune in. Instead of pushing every preset button
and hearing the live song, you can simply use the TuneScan function to
get a short preview of songs that you have missed on each of your
SmartFavorites music channels.
• You can switch the category by touching [
] (Category Up) or
] (Category Down) on the List screen after selecting a Search
item other than Featured.
• You can switch the display format by touching [ ] (Info) in the List
screen after selecting a Search item.
Channel No./Channel Name
Channel No./Artist Name
Channel
No./Song Title
Channel No./Content Info
Channel No./Channel
Name
Searching by Channel
Touch [All Channels].
Touch the selected channel.
All Channels will be displayed in a list.
The channel you selected is received.
Searching by Category
Touch Category Name.
Touch the selected channel.
The channels within the category of the current channel are
listed.
The channel you selected is received.
63-EN
Searching by My Music
Touch [My Music]*.
Touch the desired artist/song.
The channel of the selected artist/song being broadcast is
received.
Searching by My Games
Touch [My Games]*.
When the sports teams that you have stored are currently
playing a game that is being broadcast, they will be displayed in
a list.
* Displayed only when the game of stored team is broadcasting.
Touch the desired team.
The channel of the selected game being broadcast is received.
Searching by Featured Favorites
Touch [Featured]*.
The Category that SiriusXM recommends will be displayed in a
list.
* Displayed only when the SiriusXM Tuner-SXV200 or later is
connected.
Touch the desired category.
The channel you selected is received.
You can directly select the channel number by using the numeric
keypad.
Touch [
] (Direct Tune).
The numeric keypad input screen is displayed.
Touch to input the channel number.
Touch [Enter].
The selected channel is received.
Storing the desired Song/Artist
While listening to SiriusXM Satellite Radio, you can be alerted when
your favorite songs or artists are playing on other channels. The radio
will display an Alert message when a matching artist or song is found on
another channel. Then you can choose if you want to tune to that
favorite or you can ignore the alert and stay on your current channel.
Information on setting up the Artist and Song Alerts is described in
“Receiving and Tuning to an Alert”.
• The maximum number of registered Teams, Artists, and Songs is 50.
For details on how to register a Favorite Team, see “Setting the Favorite
Sports Team Alerts” (page 41).
• “Artist /Song Unavailable” appears on the display if both the artist and
song is not available to be stored.
• “Artist (Song) Unavailable” is displayed if just the artist (song) is not
available to be stored.
“Artist (Song) Saved” is displayed if this Artist (Song) was previously
stored.
• If there is no memory space, “Alert Memory Full” is displayed, and then
you are asked whether you want to replace a stored item. If you select
“OK,” then the list of stored alert items is displayed. Touch the item that
you want to replace.
Receiving and Tuning to an Alert
Whenever a stored sports team, artist, or song is playing on another
channel, an interruption Alert appears on the unit display. To tune to the
game, artist or song identified by the alert, follow the steps below:
When stored information is broadcast, after displaying
“Song Alert”, “Artist Alert” or “Game Alert,” a Pop up
screen is displayed.
Touch [Tune] to receive.
Touch [Dismiss] to skip.
Touch the desired channel within the selected category.
Selecting the Channel Directly
Touch the “Artist Saved” or “Song Saved” to choose to
store the Artist or the Song.
Total registrations and Remaining number of registration slots is
displayed for 2 seconds, then the Artist or Song is registered as
an Artist alert or Song alert.
The artist names and song titles that you have stored and are
currently playing will be displayed in a list.
* Displayed only when the stored song or artist is broadcasting.
Touch [
] (Set Alert) on the SiriusXM mode screen.
The Memory type selection screen is displayed.
64-EN
• Touch [ ] (Info) on the My Music list/My Games list screen, the
information of the broadcasting channels will be changed.
Each time you touch the [ ] (Info), the display changes as below.
My Music list:
Artist name
Song Title
Content Info
Channel name
Artist name
My Games list:
League Short Name
Team Abbrev/Team Nickname
Content Info
Channel name
League Short Name
Replay Function
Using Jump Memory and Jump Recall function
In SiriusXM mode, you can pause, rewind and replay live Satellite Radio.
The Jump Channel is a special channel that you can jump to with the
press of a dedicated button and then jump back to the previous channel.
This channel is often used to select your favorite SiriusXM traffic and
weather report channel.
Replay mode screen example
Buffer usage
Current Replay point
Replay status indicator (
Replay range
Time to live
Touch [
Touch [
The “
or
To store the Jump channel in memory, touch and hold
] (Jump) for at least 2 seconds.
Touch [
channel.
] (Jump) to recall and tune to the saved Jump
Touch [
channel.
] (Jump) again to receive the previous
• While receiving the Jump channel, you cannot perform other
operations.
• Only one channel can be stored as the jump source channel. When you
want to store a new channel, the old channel will be cleared and the new
one will be stored.
] to Pause playing of the channel content.
(Pause)” indicator and replay progress bar is displayed.
] again to resume playing the content.
The “ (Play)” indicator lights up and offset playback
commences.
Touch [
] (Live) to exit Instant Replay and listen to
live content.
• To fast reverse, touch and hold [
] and to fast forward, touch and
hold [
].
• Touching [
] or [
] will move a track up/down.
• If you change channels while in Replay mode, the contents of the replay
buffer are emptied.
• The allowed recording time differs depending on the SiriusXM Tuner
box.
Parental Lock Function
The Parental Control feature allows you to limit access to any SiriusXM
channels, including those with mature content. When enabled, the
Parental Control feature requires you to enter a passcode to tune to the
locked channels. For information on setting the Parental Control
passcode, see “Setting the Parental Lock” (page 41).
When a locked channel is selected, “Channel Locked” is displayed
and then the numeric keypad appears for you to enter the passcode.
Input the 4-digit passcode you set in “Setting the Parental
Lock” (page 41).
The initial number is 0000.
• If you input a wrong passcode, “Incorrect Pass Code entered” is
displayed.
• After entering the correct passcode, you can access all locked channels
without entering the passcode again until the unit is powered off and
then back on.
65-EN
HDMI Device
(Optional)
Devices supporting HDMI can connect and play back through this unit
(for example, an optional DVE-5300 (DVD Player), iPhone or other
Smartphones). When making HDMI connections, you need to set
HDMI on the unit suitable for the connected device. For details, see
“HDMI Setup” (page 42).
• The HDMI/MHL connecting cable differs depending on the connected
device corresponding to HDMI. Prepare optional HDMI/MHL
connecting cable sets suitable for your device.
HDMI Operation
iPhone, Smartphone, etc.
The output of your electronic device will be mirrored on this unit
through the HDMI connector. Control from this unit is not possible.
• The electronic device must possess an HDMI output interface.
• Not all devices with an HDMI output interface can be recognised by
this unit.
• Use only the Alpine Special HDMI connection cable.
DVD Player Operation
You can operate discs using the Remote Control unit supplied with the
DVE-5300 (DVD Player). For details on operating the Remote Control
unit, refer to the Owner’s Manual of the DVE-5300.
Press the
Press the
(MENU) button and select HDMI mode.
The display shows the HDMI mode screen.
• You can select and change the source in the Favorite screen
(page 21).
• For your safety, video is not displayed and only audio can be heard
while driving.
In HDMI player mode, the screen of the device displays
the content of electronic equipment by mirror image.
(MENU) button and select DVD (CD) mode.
The display shows the DVD (CD) mode screen.
• For details on the types of playable discs and formats, refer to the
Owner’s Manual of the DVE-5300.
The DVD operation screen display
Touch the screen while the DVD playback screen is displayed.
You can select Display Mode.
For details, see “Switching Display Modes (During Video File Play
Back)” (page 54).
• You cannot operate them while driving.
You can select Display Mode.
For details, see “Switching Display Modes (During Video File Play
Back)” (page 54).
• The operation screen changes to the visual screen in the DVD mode for
5 seconds after an operation has been performed.
• If you try to activate the DVD while driving, the display will show the
warning-Picture off for your safety.
66-EN
Bluetooth Operation
Setup Before Using
About Bluetooth
Bluetooth is a wireless technology allowing communication between a
mobile device or personal computer over short distances. This enables a
hands-free call or data transmission between Bluetooth compatible
devices. Bluetooth transmission is available in the unlicensed 2.4 GHz
spectrum if the distance between devices is within 10 meters. For details,
refer to the Bluetooth website (http://www.bluetooth.com/).
• Depending on the Bluetooth version, a Bluetooth compatible device
may not be able to communicate with this unit.
• Proper function of this unit with all Bluetooth compatible devices is not
guaranteed. For handling of the Bluetooth compatible device, consult
your Alpine dealer or Alpine website.
• Depending on the surroundings, Bluetooth wireless connection may be
unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected Bluetooth compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the connected
device(s).
Before Using Bluetooth
Before using the hands-free phone/audio function, the following
settings need to be made.
Set “Bluetooth” to “On” (
).
Register a Bluetooth device in this unit (page 27).
• See “Bluetooth Setup” (page 27).
• You can search for this unit using a Bluetooth compatible device, and
then connect that Bluetooth compatible device to this unit. The device
name of this unit is “iLX-F309” and the initial number of the passcode
is “0000.” Also refer to the Owner’s Manual of the connected device(s).
Hands-free Phone Control
Touch [Phone] in the Menu screen to display the Phone menu screen
(page 67).
About the Hands-free Phone
Hands-free calls are possible when using a HFP (Hands-Free Profile)
compatible mobile phone with this unit.
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is made in
a noisy location, difficulty hearing the other person’s voice is normal.
• Depending on telephone line conditions or certain mobile devices used,
voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to obtain the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain features
may not be activated by your service provider, and/or the provider’s
network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well as
the information contained in the Owner’s Manual are based upon the
latest available information and are believed to be accurate at the time
of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
• Notice that when you connect an iPhone 5 or later/Android smartphone
which installed Android Auto App, the operation screen may differ from
this section.
[Phone] button
Phone menu screen example
Recent Events list*
You can display up to 60 items, such as phone numbers of the
most recent incoming calls, missed calls and outgoing calls, and
contact names that are registered in the Phone Book. When 60
items exist in the list, the oldest item is deleted when a further
item is to be added.
Contacts list*
You can make a phone call from the Phone Book, or edit the
Phone book.
Keypad screen
Use to type a phone number.
Edit*
Use to edit the Contacts list.
* When you connect two Hands-Free Phones, the information of the
Bluetooth device set to Primary is displayed.
67-EN
Answering a Call
Call Waiting Function
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE No., etc.).
If a call comes in from another phone during a call, a notice is displayed
on the screen. This function can only be used if the connected mobile
phone has a call waiting function service included.
An incoming call triggers the ringtone and an incoming
call display.
Incoming call notification screen
Second incoming call during a conversation in the call info
area
Second incoming call notification screen
Touch incoming call notification screen.
The call starts.
Call info area
• During a call, the audio for the current mode on the unit is muted. After
calling, playback will resume.
• When the caller’s number is transmitted to the system, if the caller’s
name is stored in the phone book, the name is displayed. If the name is
not stored, the number is displayed.
• Touch [
] (Decline) to reject an incoming call.
• By touching the call info area during phone call, you can change to the
Phone Operation screen and adjust the speech volume, etc. For details,
see “Operations During a Conversation” (page 71).
• Touch [ ] during a conversation to hide the call info area. To display it
again, Touch or swipe downward on [
] on the upper part of
the screen.
• During an incoming call or a conversation on the Primary (Secondary)
Hands-Free Phone, if there is an incoming call on the Secondary
(Primary) Hands-Free Phone, you cannot answer the call on the
Secondary (Primary) Hands-Free Phone without first ending the call on
the Primary (Secondary) Hands-Free Phone.
Hanging up the Telephone
Touch [
] (End Call).
The call finishes.
68-EN
By touching the second incoming call notification screen, you can put
the current call on hold and answer the second call.
On-hold screen
• To switch a party, touch the on-hold screen.
• To finish a call, touch [
] (End Call).
Second incoming call during a conversation in the Phone
Operation screen
• The display or operation may differ depending on the connected mobile
phone or the caller’s mobile phone.
Second incoming call notification screen
Touch the Short Cut icon.
Touch [Call].
A contact’s name, phone number, and a confirmation message
of the phone number are displayed.
The phone call is started.
Making a phone call using the Phone Menu
Making a phone call from the Recent Events list
Touch [
screen.
] (Recents) to change to the Recent Events list
By touching the second incoming call notification screen, you can put
the current call on hold and answer the second call.
Call On Hold screen
Dialed history:
Names or Numbers/Date
Received history:
Names or Numbers/Date
Missed Incoming history:
Names or Numbers/Date
• To switch a party, touch the on-hold screen.
• To finish a call, touch [
] (End Call).
• This unit supports only the Call Waiting function of a mobile phone.
The second call function and three-way calling function of a mobile
phone cannot be operated from this unit. Also the screen display may
malfunction.
Touch the name of the contact you want to call.
Touch [
Calling by Favorite Function
].
The phone call is started.
Calling from the Contacts list (Phone Book)
Calling
The Detail info screen is displayed.
Touch [
screen.
] (Contacts) to change to the Contacts list
Touch the name of the contact you want to call.
Touch [
The Phone Operation screen is displayed.
You can make a phone call using the Short Cut function of numbers that
have been registered in Favorite. For details, see “Favorite Function”
(page 21).
Press the
(Favorite) button.
The Favorite screen is displayed.
Favorite screen
].
The phone call is started.
69-EN
Entering a Phone Number to Make a Call
Touch [
] (Keypad).
The number input screen (Keypad) appears.
Speak into the microphone supplied with this unit.
• If no speech is detected, the unit may pause depending on version
of the connected iPhone. In that case, touch the microphone icon
[ ] in the center of the Voice Control mode screen. You can
continue to use the Voice Control mode.
To finish the Voice Control mode, touch [ ] or press
button.
• Depending on the iPhone, the Siri function may finish automatically.
Adjusting the volume
Adjust the speaker/microphone volumes in Voice Control mode.
Perform the same procedure to adjust the speaker/microphone volumes
of hands-free phone.
Touch [
] to delete an entered number.
Touch [Delete All] to delete all entered numbers.
Enter the phone number you wish to call.
Touch [
• You can enter up to 31 digits.
] (Call).
A confirmation message of the phone number appears.
Touch [ ] or [ ].
Adjust the speaker and microphone volumes.
Stopping input to the microphone
If the surrounding sound (road noise, etc.) is loud, you may wish to cut
input to the microphone for 3 seconds.
Touch [
].
Touch [Call].
The phone call is started.
Voice Dial Function
You can make a telephone call by using voice operation.
Using Voice Recognition function
You can use Siri function of your iPhone or make a telephone call by
using voice operation of your smartphone.
• Connect your smartphone to the unit via Bluetooth, then set to “Handsfree” or “Both” (page 27).
Press
button.
• When using Apple CarPlay or Android Auto, the operation screen may
differ from the screen design in the Owner’s Manual.
Using Siri
You can use the Siri function of your iPhone. To use this function, set
the Siri setting of your iPhone to ON.
• Connect your iPhone to the unit via Bluetooth, then set to “Hands-free”
or “Both” (page 27).
• The available functions differ depending on the connected iPhone.
• Ask Siri to play a track from the music library applies only to USB
source.
• Siri and other streaming services are enabled by connecting to
compatible smartphones that are able to receive data. Please ensure that
cellular data and/or Wi-Fi is turned on in the smartphone to enjoy
these features.
• Extensive use of Siri or other streaming services may increase your
phone’s data usage. Please check with your phone company to ensure
you have an appropriate Data plan.
Press
button.
The Voice Control mode screen is displayed.
70-EN
The Voice Dial mode screen is activated.
Say the telephone number* or name* you want to call,
into the microphone.
* The number and name depend on the voice dial information stored
in the smartphone.
To finish the Voice Dial mode, touch [ ] or press
button.
• You can perform this operation only when a voice dial compatible
smartphone is connected.
• The Voice Dial function performance depends on the recognition range
of the smartphone and mounting location of the microphone.
Note when the microphone is mounted.
• Voice dial operation depends on the function being available on the
smartphone. For details, refer to the owner’s manual of the smartphone.
• Depending on the smartphone, the Voice Dial operation may finish
automatically.
Adjusting the volume
Adjust the speaker/microphone volume in Voice Dial mode. Perform
the same procedure to adjust the speaker/microphone volume of handsfree phone.
Phone Book Function
Phone Book screen example
Touch [ ] or [ ].
Adjust the speaker and microphone volumes.
Stopping input to the microphone
If the surrounding sound (road noise, etc.) is loud, you may wish to cut
input to the microphone for 3 seconds.
Touch [
].
Operations During a Conversation
Phone Operation screen
Use to search by directly inputting a name or phone number
with the Keypad.
For details, see “How to Input Characters and Numbers
(Keypad)” (page 20).
Displayed when multiple phone numbers are registered.
Touch [ ] to display the registered phone number list.
Use to narrow down your search for names, etc.
For details, see “Alphabet Search Function” (page 57).
Touch [
] to register as Favorite.
Synchronizing the Phone Book
Name and phone number
• If registered with a Group, the Group Name is also displayed.
Although, depending on the connected mobile phone, it may not
be displayed.
Conversation time
Adjusting the Speech Volume
You can adjust Caller Level and Mic. Level (Microphone Level) during a
phone call.
Touch [ ] or [ ].
You can synchronize the system’s phone book with the mobile phone’s
phone book.
Touch [
] (Edit).
Touch [Download].
Touch [Sync].
Synchronization of the phone books starts.
• You can store up to 1,000 registered name in the phone book.
• You can store up to 5 phone numbers by one person’s name.
You can adjust the volume in 11 levels.
Adding the Phone Book
Changing the Voice Output
The voice output for calls is switchable between car speakers and the
mobile phone speaker.
Touch [
] (Speaker).
• Depending on the mobile phone, this operation may not be possible.
DTMF (Touch-Tone) Function
Transmits a DTMF (Touch-Tone) during a call.
Touch [
Input number.
] (Keypad).
Touch [
] (Edit).
Touch [Download].
Touch [Add].
Stays on standby for connection of the mobile phone.
• Touch [Cancel] to cancel the standby mode.
The mobile phone accesses this unit and then transfers
the phone book from the mobile phone to this unit.
• Mobile phone connection is canceled while the phone book is being
transferred.
The number input screen (Keypad) appears.
• You can transmit a Touch-Tone signal during a call.
71-EN
Deleting the Phone Book Entries
Deleting One Entry from the Phone Book
Touch [
] (Edit).
Touch the checkbox [ ] of the contact name (or phone
number) you want to delete. A tick (
) appears in the
checkbox.
Bluetooth Audio
If a Bluetooth compatible mobile phone, portable player, etc. is
connected by wireless, you can play back a song (operation is
controllable from the unit).
• Operation may vary, depending on the Bluetooth compatible device.
Bluetooth Audio main screen example
• You can choose up to 10 names and numbers at a time.
Touch [ ] (Delete).
Touch [OK].
The confirmation screen is displayed.
If multiple phone numbers are registered, they are all deleted.
The selected number is deleted.
Deleting All Entries from the Phone Book
Touch [
] (Edit).
Touch [
] (Delete All).
The confirmation screen is displayed.
Touch [OK].
Function mode
All entries of the phone book are deleted.
Searching in the Phone Book
You can make a call using the phone book search function.
Touch [
] (Search).
The Input User Name screen (Keypad) is displayed.
Input the string of letters of the name that you want to
search, then touch [OK].
A list of names beginning with the string of letters you entered is
displayed.
Current track no./Total song no.
Artist title
Song title
Album title
Elapsed time
Touch or swipe to the right to use the Quick Search mode
and Full Search mode.
Quick Search mode screen example
Swipe vertically in the list to change pages.
Touch the name you want to call.
Touch [
The Phone Operation screen is displayed.
].
The phone call is started.
• For details of how to input characters using the keypad, see “How to
Input Characters and Numbers (Keypad)” (page 20).
• If there are fewer than five registered items in the phone book, you
cannot use the phone book search function.
Full Search button
Swipe to the right when using Full Search mode.
• The displayed onscreen buttons may differ depending on the AVRCP
version.
• Song title/Artist title/Album title/Elapsed time do not display for
AVRCP Ver. 1.0.
• To play back audio, a mobile phone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/Video
Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the Bluetooth audio source is paused.
Compatible AVRCP versions: 1.0, 1.3, 1.4, 1.5
• Available functions may differ depending on the AVRCP version.
72-EN
Playback
Random Play
Press the
mode.
(MENU) button and select Bluetooth Audio
The display shows the Bluetooth Audio mode screen.
• You can select and change the source in the Favorite screen
(page 21).
Touch [
] or [
] to select the desired track (file).
Returning to the beginning of the current file:
Touch [
Available for AVRCP Ver. 1.3, 1.4 and 1.5 only.
Touch [
Select your desired Random Play mode.
The selected Random Play mode changes the button.
All Track
].
Fast backward the current file:
Touch and hold [
].
Group
Advance to the beginning of the next file:
Touch [
].
The Random Play mode select pop up screen is displayed.
• The [
] button displays the currently selected mode.
].
Off
: All songs in the Bluetooth compatible devices are
played back in random sequence. Any one song does
not play back again until all songs have been played
back.
: A Group is selected randomly and songs in the Group
are played back in order. After all songs are played in
the Group, the next Group is selected randomly.
Random mode Off.
Fast forward the current file:
Touch and hold [
• The
].
buttons provide the same functions above.
To pause playback, touch [
].
Repeat Play
Available for AVRCP Ver. 1.3, 1.4 and 1.5 only.
• Operations may differ depending on the connected Bluetooth
compatible device.
Search Function
Available for AVRCP Ver. 1.4 and 1.5 only.
The displayed list differs with the connected Bluetooth device.
You can search for your desired song by using one of two modes; the
Quick Search mode and the Full Search mode.
Touch [
Select your desired Repeat mode.
The selected Group*1 or file is played back.
The selected Repeat mode changes the button.
*1 The first file in the selected Group is played back.
All Track
• To switch into Quick Search mode, see
screen example” (page 72).
].
The Repeat mode select pop up screen is displayed.
• [
] displays the currently selected mode.
Group
Single Track
Off
Once all of the songs have finished playing, play
back is repeated, starting with the first song.
Only files in a group are repeatedly played back.
: Only the track currently playing is repeatedly
played back.
Repeat mode Off.
• Operations may differ depending on the connected Bluetooth
compatible device.
Quick Search mode
Touch your desired Group name or File name.
in “Bluetooth Audio main
Full Search mode
Touch your desired Group name*2 or File name.
When you select a File name, the selected song is played.
When you select a Group name, repeat the same procedure to select
another Group name or File name.
*2 When you touch the [ ] by a Group name, the unit plays from the first
song in the Group.
• To switch into Full Search mode, see
in “Quick Search mode screen
example” (page 72).
• To switch the displayed list or return to the previous page in the List
screen, see “About Basic Operation for List Screen” (page 16).
73-EN
Connecting a Bluetooth Device
Registering a Bluetooth device in the unit enables automatic connection.
If it does not connect automatically, run through the connection
procedure again.
Touch [
Touch [Reconnect].
] (Settings).
The Device Setting select pop up screen is displayed.
Bluetooth connection will start.
Disconnecting the Bluetooth Connection
Touch [
Touch [Disconnect].
] (Settings).
The Device Setting select pop up screen is displayed.
The Bluetooth connection is disconnected.
Changing the connecting Bluetooth Device
If multiple Bluetooth devices are registered in this device, you can
change the connection among the registered devices.
Touch [
] (Settings).
Touch [Change].
Touch [
device.
] (Audio) or [
] (Hands-free) of the selected
The connection will transfer to the selected device.
74-EN
Auxiliary Device
(Optional)
Operating an AUX, AUX DVD or GAME
Example for AUX, AUX DVD, GAME mode display
Operating Auxiliary Devices (Optional)
To operate devices connected to the AUX terminals of the unit, follow
the procedure described below.
• Set AUX to “On.” See “AUX Setup” (page 42).
• Depending on the connected unit, the onscreen buttons may not work,
or their operation may differ.
• When the iDataLink module (sold separately) is connected, the
Auxiliary (AUX) mode is not available.
WARNING
It is dangerous (and illegal in many states) for the driver
to watch video while driving the vehicle. The driver may
be distracted from looking ahead and an accident could
occur.
] (Display Mode)
For details, see “Switching Display Modes (During Video File Play
Back)” (page 54).
• You cannot operate them while driving.
Install the unit correctly so that the driver cannot watch
video unless the car is stopped and the parking brake is
applied.
If the unit is not installed correctly, the driver will be able
to watch video while driving and may be distracted from
looking ahead and cause an accident. The driver or other
people could be severely injured.
Press the
mode.
(MENU) button and select Auxiliary (AUX)*
The display shows the Auxiliary (AUX) mode screen.
* The name which is given as the mode name in “Setting the Auxiliary
(AUX) Name” (page 42) is displayed.
• For your safety, video is not displayed and only audio can be heard
while driving.
• You can select and change the source in the Menu screen (page 18) or
Favorite screen (page 21).
• For details on the connected auxiliary device, refer to its owner’s
manual.
AUX Operation Screen Display During Video File Playback
Touch the screen.
The Auxiliary (AUX) operation screen is displayed.
• The operation screen changes to the visual screen in the Auxiliary
(AUX) mode for 5 seconds after an operation has been performed. To
hide the Auxiliary (AUX) operation screen, touch the video display
area.
75-EN
Camera Operation
(Optional)
When an optional rear camera is connected, the view video of camera
can be output to the monitor.
Rear camera:
If a rear camera is connected, when the vehicle is reversed, the rear
camera view (guide marks for vehicle width and available distance) is
displayed automatically on the screen of this unit.
You can adjust the quality of the camera image.
Setting items: Brightness / Color / Contrast
See “Picture Quality Setup” (page 36).
Rear Camera Operation
Displaying the Rear Camera Image from the
Menu screen
Press the
(MENU) button.
The menu screen is displayed.
Guide Display ON/OFF Setting
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
Touch [Guide Off] or [Hitch Guide Off] on the Rear
camera display screen.
The guide disappears, and then the [Guide Off] or [Hitch Guide
Off] switch changes to [Guide On] or [Hitch Guide On].
Touch [Guide On] or [Hitch Guide On] to turn on the
guide.
Adjusting the Caution Display Location
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
Touch [
Caution].
• For each touch, the caution location moves to the top or bottom of the
screen.
About the Rear Camera Guide
To display the guide, set “Guide Display ON/OFF Setting” (page 76) to
On. Also, to adjust the guide, see “Adjusting the Rear Camera Guide”
(page 43). You can also turn off the guide in the Rear camera display
screen.
Indication mark meaning
[Camera] button
• You can also display the menu screen by touching the lower part of
the Audio source screen or by swiping upward.
When the car is put into reverse gear, the monitor switches to the rear
view camera image. Guides appear to help visualize the car’s width and
distance from the rear bumper.
Touch [Camera].
The Rear Camera view is displayed.
• Touch the screen while the camera image is being displayed, and touch
[ ] or [ ] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment. For details, see “Adjusting the
Rear Camera Guide” (page 43).
Displaying the rear view video while the car is
in reverse
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
If you shift the gear lever to a position other than reverse
(R), the monitor returns to the previous screen.
• Never depend solely on the camera when backing up. Always turn and
look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
• You can perform a Guide Adjustment. For details, see “Adjusting the
Rear Camera Guide” (page 43).
76-EN
Car width extension marks (red, yellow and green in
order of distance)
If properly calibrated, the marks indicate the car’s width. This
helps guide the car’s path when backing up in a straight line.
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• Set the marks to suit the car’s width.
Distance guidance marks
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• We recommend that you measure the actual distance to the
marks when parked on a level surface.
• Depending on the condition of the car or road surface, the range of
vision may vary.
• The camera has a limited range of vision. Objects at extreme angles to
the camera (e.g. under the bumper or at opposite ends of the bumper)
may not be in the its field-of-vision.
• The rear camera image may have a tint which is different from the
actual surroundings.
• Depending on the car, the guidance may deviate to the right or left. This
is not a malfunction.
When there is a steep upward slope behind the car
(example)
Distance guidance marks
Actual distances
Distance guidance mark
The distance guides represent the ground level distance from the rear
bumper. It is difficult to accurately estimate the distance to objects above
ground level.
In the following example, the distance to A is 0.5 m and the distance to B
is 1 m.
Error Error
A (about 0.5 m)
The distance guidance mark represents the distance to a flat
road surface. Therefore in the case of an upward slope
behind the car, the distance guides are displayed closer to
the rear bumper than the actual distance. For example, if
there is an obstacle on the upward slope, it may appear
farther away than its actual position.
Also, an error may occur between the guidance and the
actual path of the car on the road surface.
When there is a steep downward slope behind the car
(example)
about 1 m
In the screen, according to the distance guidance marks, the
truck seems to be parked about 1 m away (at the position B).
In actual fact, however, if you reversed to position A, you
would collide with the truck.
In the screen, positions A, B and C seem to be located in order
of proximity. However, in actual fact, the position A and C are
the same distance, and B is farther away than positions A and
C.
• The car width extension mark represents the distance to the road
surface. The distance to an object on the road is not accurately
represented by the guides.
Error between the screen and the actual road surface
In the following conditions, errors are produced between the screen
guidance and the actual road surface. (The illustrations represent a case
when the camera is installed in the standard position.)
Error
Error
In the case of a downward slope behind the car, the distance
guides are displayed farther from the rear bumper than the
actual distance.
If there is an obstacle on the downward slope, it seems closer
than its actual position.
Also, an error may occur between the guidance and the
actual path of the car on the road surface.
77-EN
iDataLink Operation
When the unit is connected to the car’s iDataLink module, you can
transfer and receive data between the car and the unit to check the car’s
status, or to make various operations from the unit.
When you use iDataLink mode, set each setting other than
“Aftermarket” in “Setting the Source Category” (page 45).
Adjust or confirm the item/information accordingly.
• Operable functions and displays may differ depending on the vehicle.
iDataLink Function Screen example
Climate screen example
You can control the temperature inside the vehicle, etc.
• An iDataLink module (sold separately) is required.
• Available functions differ depending on your vehicle. For details, refer to
your vehicle’s instruction manual.
About Audio Interrupt
Audio Interrupt is the function that outputs sound from the unit when
Voice Information (audio reading from the phone book, etc.)* from the
vehicle occurs.
• The Audio Interrupt function of the vehicle differs depending on the
type and grade of the vehicle.
* For your safety, when interrupted with Voice Information, you cannot
operate the buttons on the front panel or the touch buttons on the
display, except for some operations.
- The operating restrictions may differ depending on which mode the
unit is in during Voice Information.
- You can use the / (DOWN/UP) button to control the volume of
Voice Information.
- Operation of the Remote Control unit (sold separately) is also
restricted.
Gauges screen example
You can check the vehicle's speed, the engine's rotation speed, etc.
Access to iDataLink Mode
You can check the car’s status, set the air conditioning, etc.
Parking sensor screen example
Press and hold the (Favorite) button or touch [
(Vehicle Info.) in the Menu screen to activate iDataLink
mode.
You can check the distance from the front and rear of the vehicle to an
obstacle.
• The iDataLink mode screen selected in “Setting the Default
Vehicle Screen” (page 45) is displayed.
Touch the desired tag on the top of the screen.
Select item:
Climate / Gauges / Park Sensor / Vehicle Info. / Car Setting
• The displayed tag options differ depending on the type of vehicle.
Climate screen example
• If the car sensor detects an obstacle, the screen automatically changes to
the Parking sensor screen. For details, see “About Parking Sensor screen”
(page 79).
78-EN
Vehicle Information screen example
Parking Sensor Camera interlock screen example (Rear
camera)
You can check for open doors, check the tire pressure, the battery life,
etc. for the vehicle.
You can check for obstacles through an interlocked camera image by
connecting a Rear Camera.
Car Setting screen example (Generic List screen)
• Touch the Camera image area to switch to the Camera full screen.
(While displaying the Camera full screen, touch the Camera screen,
then touch [Sensor] to return to the Parking Sensor Camera interlock
screen.)
• Touch the car icon to switch to the Parking sensor full screen. (Touch
[ ] on the Parking Sensor full screen to return to the Parking Sensor
Camera interlock display.)
• To use this function, set the Camera Select setting to “Rear.” For details,
see “Setting the Camera Input” (page 43).
The Generic List/Popup Window/Current source control screen is
displayed.
About Parking Sensor screen
The Parking sensor screen turns on when the front or rear sensor on
your vehicle detects an obstacle within a certain distance.
Parking Sensor Full screen example
When the front or rear sensor detects an obstacle within a certain
distance, the Parking Sensor screen is displayed, and the indicator (
) that corresponds with that area lights up.
Indicator colors when an obstacle is detected.
Red: close distance
Orange: medium distance
Yellow: long distance
• Depending on the speed of the vehicle, when moving faster than a
certain speed, the Parking Sensor screen may not be displayed.
• Vehicles that do not have the obstacle detection sensor cannot use this
function.
* [ ] is displayed only when the Rear camera is interlocked.
79-EN
When changing the name:
Touch the icon name, then input characters into Edit Name
(Keypad). You can also select a basic name from the [Template]
of the Keypad. For details on how to input characters using the
keypad, see “How to Input Characters and Numbers (Keypad)”
(page 20). (When a basic name is selected from the Template,
the icon will be changed according to the basic name.)
When changing the layout of the switches:
Drag and drop an icon to the desired location.
To revert to a default icon:
Touch the check box “ ” of the icon that you want to revert to
default, and then touch [ ] (Reset). If you touch [ ] (Reset
All), all icons revert to default icons.
External Accessory Control Operation
You can set the headlights to ON/OFF or adjust the air suspension from
this unit by connecting the optional External Accessory Control
module.
• In order to keep external accessory control outputs on during the
ignition cycle, please change “Accessory During Crank” to “On”.
Otherwise all switches will be turned off.
[Setup]
[System]
[Factory System Setup]
[Maestro Module]
[Maestro Features]
[Maestro Module]
[Accessory During
Crank]
“On”
The following explains how to edit the control switches, because the
functions that can be controlled differ depending on the type of vehicle.
You cannot edit the External Accessory screen while
driving.
Your vehicle must be parked with the ignition key in the ACC or ON
position. For details, see “To display the Setup Menu screen” in
“Setup Operation” (page 26).
Touch [Ext Acc Ctrl] in the Menu screen to activate
External Accessory screen.
The External Accessory screen is displayed.
Touch [
Edit each switch.
] (Edit).
The Edit Control Switches screen is displayed.
When changing an icon:
Touch the icon, and select your desired icon from the Icon Type
list. After selecting the icon, set the Output Type (Timing) for
each function.
* The Output Type (Timing) sets the operating time for that function
when you touch the icon on the External Accessory screen.
Pulse:
The operating time when you touch the icon. (Select
from 11 steps, ranging 0.5 sec. to 10 sec.)
Latch:
Switch On/Off by touching the icon.
Momentary: Operating time lasts from when an icon is touched to
when it is released.
80-EN
After editing is complete, touch [ ] (Back).
After the caption for the confirmation is displayed, touch
[OK].
• If you touch [
] (Cancel) while editing, the edits are reset and the
screen returns to the previous Edit screen.
Information
Product Software Update
This product use software that can be updated through a USB flash
drive. Download the software from the Alpine website and update the
product using the USB flash drive.
Updating this product
Check the Alpine website for details on updating.
http://www.alpine-usa.com
Important information on the software
About the software license of the product
The software installed in the product contains open-source software.
See the following Alpine website for details on the open source software.
http://www.alpine.com/e/oss/download
About the Supported Formats
About MP3/WMA/AAC/FLAC
CAUTION
Except for private use, duplicating audio data (including
MP3/WMA/AAC/FLAC data) or distributing, transferring,
or copying it, whether for free or for a fee, without
permission of the copyright holder is strictly prohibited
by the Copyright Act and by international treaty.
Method for creating MP3/WMA/AAC/FLAC (USB Flash drive) files
Audio data is compressed using software with MP3/WMA/AAC/FLAC
(USB Flash drive) codecs. For details on creating MP3/WMA/AAC/
FLAC (USB Flash drive) files, refer to the user’s manual for that
software.
MP3/WMA/AAC/FLAC (USB Flash drive) files that are playable on this
device have the file extensions.
MP3: “mp3”
WMA: “wma”
AAC: “m4a”
FLAC: ”flac”/”fla”
WMA is not supported for the following files, Windows Media Audio
Professional, Windows Media Audio 10 std or Windows Media Audio
10 Pro Lossless.
There are many different versions of the AAC format. Confirm that the
software being used conforms to the acceptable formats listed
above. It’s possible that the format may be unplayable even though
the extension is valid.
Playback of AAC files encoded by iTunes is supported.
Supported playback sampling rates and bit rates
MP3 (USB Flash drive/Disc)
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
WMA (USB Flash drive/Disc)
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz, 16 kHz,
11.025 kHz, 8 kHz
Bit rates:
48 - 320 kbps
AAC (USB Flash drive/Disc)
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz, 8 kHz
Bit rates:
16 - 320 kbps
FLAC (USB Flash drive)
Sampling rates: 96kHz, 88.2kHz, 48kHz, 44.1kHz, 32kHz, 24kHz,
22.05kHz, 16kHz, 8kHz
Channel number: 1ch, 2ch
What is MP3?
MP3, whose official name is “MPEG Audio Layer 3,” is a compression
standard prescribed by the ISO, the International Standardisation
Organisation and MPEG which is a joint activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is capable
of compressing audio data at extremely high ratios, reducing the size
of music files to as much as one-tenth their original size. This is
achieved while still maintaining near CD quality. The MP3 format
realizes such high compression ratios by eliminating the sounds that
are either inaudible to the human ear or masked by other sounds.
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1.0, v1.1, v2.2, v2.3, v2.4, and WMA tag
Ver.1.x. If tag data is in an MP3/WMA/AAC file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA tag
data.
For non-supported characters, “?” is displayed.
The number of characters may be limited, or not correctly displayed,
depending on the tag information.
What is WMA?
Playing back MP3/WMA/AAC/FLAC
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a basic
format of audio compression used by MPEG2 or MPEG4.
What is FLAC?
FLAC (Free Lossless Audio Codec) is an audio file codec for lossless
compression, developed and offered as open source software.
Codecs with lossy compression forms, such as MP3 and AAC, reduce
part of the data to improve compression efficiency.
However, FLAC can reconstruct compressed data to be an identical
copy of the original data by performing lossless compression. The
compression ratio of FLAC is about 50%.
MP3/WMA/AAC files are prepared, then written to a USB flash drive.
• Maximum numbers of playable files/folders
USB Flash drive: 10,000 files/folders (including Root Folder)
• Largest playable file size: 512 MB
Playback may not be performed if a disc exceeds the limitations
described above.
If a file/folder name is long, the maximum possible number of files
may decrease.
• Both Audio and Video files are counted if their formats are
playable on this unit.
Media supported
The media that this device can play back a USB flash drive.
81-EN
Corresponding File Systems
Terminology
This device supports FAT 16/32.
The maximum nested folder depth is 8 (including the root
directory). File names are limited to 256 characters (including the
extension).
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be what’s
expected. Verity the writing order in the software’s documentation.
The playback order of the folders and files is as follows. (The
following numbers may differ from actually displayed numbers.)
Bit rate
This is the “sound” compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher the
sampling rate, the higher the sound quality, but also the larger the
volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Root
Folder
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA/AAC/FLAC (USB flash drive) files.
Root folder
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically
for all burned discs.
Folder
82-EN
MP3/WMA/AAC/FLAC/
WAV File
In Case of Difficulty
If you encounter a problem, please turn the power off,
then on again. If the unit is still not functioning normally,
please review the items in the following checklist. This
guide will help you isolate the problem if the unit is at
fault. Otherwise, make sure the rest of your system is
properly connected, or then consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness/Contrast control is set at the minimum position.
- Adjust the Brightness/Contrast control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the Auxiliary Device are not securely made.
- Check the connections and firmly connect.
• The Parking Brake Lead is not connected.
• The Parking Brake is not engaged.
- Connect the Parking Brake Lead, then engage the Parking
Brake.
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
USB Audio
Unit does not operate.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
Picture is unclear or noisy.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
83-EN
If this Message Appears
Various messages are displayed on the screen during operation. In
addition to the messages telling you the current status or providing
guidance for the next operation, there are also the following error
messages. If one of these error messages is displayed, carefully follow the
instructions in the solution column.
System
If you are driving, please pull over and park before using this
function.
• A setup operation, etc., was carried out while the vehicle was
running.
- Move the vehicle to a safe location, stop, and engage the
parking brake, then carry out this operation.
Over-current detected on the USB.
• Abnormal current is run to the USB connector device.
- Turn the ignition key off, and then set to ON again.
- Attempt to connect another iPod/iPhone/USB Flash drive.
USB Hub is not supported.
• A USB flash drive with a hub is connected.
- You cannot play back from a USB flash drive with a hub. USB
hub connections are also not supported.
Audio/Visual
Connected USB Device is not compatible.
• An iPod/iPhone that is not supported by the unit is connected.
- Connect an iPod/iPhone that is supported by the unit.
- Reset the iPod.
• A USB device that is not supported by the unit is connected.
- Attempt to connect another USB flash drive.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod/iPhone
and the unit, using the iPod/iPhone cable.
- Check the display by reconnecting between the USB flash drive
and the unit.
• Caused by the iPod/iPhone Software Version not being
compatible with this unit.
- Update the iPod/iPhone Software Version to be compatible
with this unit.
• The iPod/iPhone is not verified.
- Change to another iPod/iPhone.
No data.
• There are no data in the iPod/iPhone.
- Download data to the iPod/iPhone and connect to the unit.
• There are no data in the USB flash drive.
- Download data to the USB flash drive and connect to this unit.
Un-readable song was skipped.
• A copy-protected WMA file has been detected.
- You can only play back non-copy-protected files.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate supported by the unit.
84-EN
Bluetooth
Please connect a Bluetooth audio device.
• The Bluetooth audio device was not connected correctly.
- Check the settings for the unit and the Bluetooth audio device
and reconnect.
Unable to download phonebook.
• Phonebook failed to read due to mobile phone disconnection,
etc.
- Check the mobile phone connection, and then conduct
synchronizing and adding again. (See page 71)
• The connected mobile phone does not support synchronizing of
its phone book.
- Connect the mobile phone that supports synchronizing the
phone book, then synchronize again. (See page 71)
HDMI
HDMI communication error,
Please check your device and try again.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the HDMI device
and the unit.
HDMI current error,
Please reconnect your device and try again.
• Abnormal current is run to the HDMI connector device.
- Turn the ignition key off, and then set to ON again.
- Disconnect the HDMI device from the unit, and then
reconnect it.
iDataLink
CAN Communication error
• Communication error.
- Check the iDataLink module connection.
SiriusXM
Check Tuner
• The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
- Connect the Tuner or check the Tuner connection to the back
of the unit.
Check Antenna
• The SiriusXM Satellite Radio antenna or cable is either damaged
or not connected correctly to the SiriusXM Tuner.
- Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked
or otherwise damaged. Replace the antenna if necessary.
- SiriusXM products are available at your local car audio retailer
or online at www.shop.siriusxm.com.
No Signal
• The SiriusXM satellite signal is too weak at the current location.
- Move the vehicle to a location with a clear view of the southern
sky.
- Make sure the Satellite Radio antenna is properly mounted and
not obstructed by metal objects.
Channel Not Subscribed
Call SiriusXM to Subscribe
• The active channel has become unsubscribed or the requested
channel is not available in your subscription package.
- In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if
you have questions about your subscription package or would
like to subscribe to this channel. In Canada, visit
www.siriusxm.ca or call 1-877-438-9677.
- The unit will revert to the previously selected channel or to
channel 1 automatically.
Channel Not Available
• The active channel is no longer in the SiriusXM channel lineup
or the user has entered an invalid channel number.
- Visit www.siriusxm.com for information on the current
channel lineup.
• The unit will revert to the previous channel or to channel 1
automatically.
Subscription Updated
Press OK to Continue
• Your subscription has been updated.
- Touch [OK] to clear this message.
Channel Locked
• A locked channel is selected.
- Input the passcode on the number keypad screen, see “Parental
Lock Function” (page 65). If wrong passcode is entered,
“Incorrect Pass Code entered” will be displayed and the unit
will revert to the previous channel.
Updating · · ·
• The Featured Favorites channels are currently updating.
Updating Teams, please wait
• The Game table is currently updating.
Replay Memory Full
• Replay Buffer is full.
Replay Memory Near Full
• Replay Buffer will be full within 11 seconds.
Applying Alpine TuneIt App
You can not use Sound App
Because External AP is on.
• “Setting the External Audio Processor” (page 45) is “On.”
- When “External Audio Processor” (page 45) is set to “On,” you
cannot perform Sound Tuning from the Alpine TuneIt App. Set
“External Audio Processor” to “Off ” to perform Sound Tuning
from the Alpine TuneIt App.
Specifications
MONITOR SECTION
Screen Size
LCD Type
Operation System
Number of Picture Elements
9”
Transparent type TN LCD
TFT active matrix
1,152,000 pcs. (800 × 480 × 3
(RGB))
Effective Number of Picture Elements
99% or more
Illumination System
LED
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7 – 107.9 MHz
9.3 dBf (0.8 μV/75 ohms)
13.5 dBf (1.3 μV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
AM TUNER SECTION
Tuning Range
Usable Sensitivity
530 – 1,710 kHz
25.1 μV/28 dBf
USB SECTION
USB requirements
Max. Power Consumption
USB Class
File System
Number of Channels
Frequency Response*1
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
USB 2.0
1,500 mA (CDP Support)
USB (Play From Device)/
USB (Mass Storage Class)
FAT16/32
2-Channels (Stereo)
5 – 20,000 Hz (±1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
100 dB
85 dB (at 1 kHz)
*1 Frequency response may differ depending on the encoder software/bit
rate.
HDMI SECTION
Input Format
480p/VGA
GPS SECTION
GPS Reception frequency
GPS Reception sensitivity
1,575.42 ±1 MHz
-130 dB max.
85-EN
Bluetooth SECTION
Bluetooth Specification
Output Power
Profile
Bluetooth V3.0
+4 dBm Ave. (Power class 2)
HFP (Hands-Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
SPP (Serial Port Profile)
GENERAL
Power Requirement
Operating temperature
Power Output
14.4 V DC
(11–16 V allowable)
-4°F to +140°F
(-20°C to + 60°C)
16 W RMS × 4*2
*2 Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Weight
Audio output level
Preout (Front, Rear):
Preout (Subwoofer):
2.56 kg (5 lbs. 10 oz)
4V/10k ohms (max.)
4V/10k ohms (max.)
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
160 mm (6-5/16")
• Due to continuous product improvement, specifications and design are
subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%. This
means that there is a possibility that 0.01% of the pixels could be either
always ON or OFF.
86-EN
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. (“Alpine”), is dedicated to quality craftsmanship and is pleased to offer this Warranty. We suggest that you
read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related Accessories (“the
product”). Products purchased in the Canada are covered only in the
Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product, who
must reside in the United States, Puerto Rico or Canada.
You must supply proof of your purchase of the product.
You must package the product securely to avoid damage during
shipment. To prevent lost packages it is recommended to use a
carrier that provides a tracking service.
HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND
MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE
EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OF THE PRODUCT.
HOW WE EXCLUDE CERTAIN DAMAGES:
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts and
labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
Damage occurring during shipment of the product to Alpine for
repair (claims must be presented to the carrier).
Damage caused by accident or abuse, including burned voice coils
caused by over-driving the speaker (amplifier level is turned up
and driven into distortion or clipping). Speaker mechanical failure
(e.g. punctures, tears or rips). Cracked or damaged LCD panels.
Dropped or damaged hard drives.
Damage caused by negligence, misuse, improper operation or
failure to follow instructions contained in the Owner’s manual.
Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of the
product.
Service performed by an unauthorized person, company or
association.
Any product which has the serial number defaced, altered or
removed.
Any product which has been adjusted, altered or modified without
Alpine’s consent.
Any product not distributed by Alpine within the United States,
Puerto Rico or Canada.
Any product not purchased from an Authorized Alpine Dealer.
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND
CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM
“INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING
THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE
ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT,
BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE
AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL
DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER
PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT
WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state and province to province. In
addition, some states/provinces do not allow limitations on how long
an implied warranty lasts, and some do not allow the exclusion or
limitation of incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has
been installed in your vehicle by an Authorized Installation Center, and
this warranty stamped upon installation by the installation center.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number
for your nearest Authorized Alpine Service Center.
HOW TO OBTAIN WARRANTY SERVICE:
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
You are responsible for delivery of the product to an Authorized
Alpine Service Center or Alpine for repair and for payment of any
initial shipping charges. Alpine will, at its option, repair or replace
the product with a new or reconditioned product without charge.
If the repairs are covered by the warranty, and if the product was
shipped to an Authorized Alpine Service Center or Alpine, Alpine
will pay the return shipping charges.
You should provide a detailed description of the problem(s) for
which service is required.
NAVIGATION
1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
Do not send products to this address.
Call the toll free telephone number or visit the website to locate a service center.
About the Rules of Bluetooth Electromagnetic Radiation Regulation
FCC
This device cmplies with part 15 of the FCC Rules.
Operation is subjected to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference, the user is encouraged t try to correct
the interference by consulting with a dealer or an experienced technician for technical
assistance.
IC
RF
Exposure
statement
Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user's authority to operated equipment
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence.
L’exploitation est autorisee aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
This appliance and its antenna must not be co-located or operation in conjunction with
any other antenna or transmitter.
A minimum separation distance of 20 must be maintained between the antenna and
the person for this appliance to satisfy the RF exposure requirements.
Don t forget to take a moment to protect your purchase by registering your product now
at the following
address: www.alpine-usa.com/registration.
N oubliez pas de consacrer un moment a la protection de votre achat en enregistrant
votre produit des
maintenant a l adresse suivante : www.alpine-usa.com/registration.
Recuerde que con solo unos pocos pasos podra proteger su producto, registrandolo a
traves de la siguiente
direccion: www.alpine-usa.com/registration.
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : Yes
Author : ALPINE Corporation
Create Date : 2018:02:08 13:56:46+09:00
Modify Date : 2018:02:08 13:56:46+09:00
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer : Acrobat Distiller 9.5.5 (Windows)
Creator Tool : FrameMaker 10.0
Metadata Date : 2018:02:08 13:26:34+09:00
Format : application/pdf
Title : iLX-F309
Creator : ALPINE Corporation
Document ID : uuid:46d51e2f-ccb7-4721-aca6-6f3c82886e36
Instance ID : uuid:11918719-97b4-4805-bb11-4e15099f053d
Page Count : 88
EXIF Metadata provided by EXIF.tools
