Daimler Trucks North America CTP10777001 Telematics Control Unit User Manual users manual annex

Download:
Mirror Download [FCC.gov]
Document ID	3740345
Application ID	e7gyA32tY4sKlYwJqdk2VA==
Document Description	users manual annex
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.17kB (1202065 bits)
Date Submitted	2018-02-05 00:00:00
Date Available	2018-02-05 00:00:00
Creation Date	2016-09-13 14:52:26
Producing Software	GPL Ghostscript 9.06
Document Lastmod	2017-01-10 12:10:16
Document Title	Microsoft PowerPoint - prod.viewcad.d66-08094.-.1.44367938.ppt [Read-Only] [Compatibility Mode]
Document Creator	PScript5.dll Version 5.2.2
Document Author:	dtna_cvd_s_smprint

1.
TO INSTALL: SLIDE THE MODULE FORWARD ON THE
DESIGNATED SHELF UNTIL THE REAR SPRING CLIPS
ARE COMPRESSED. THEN, LOCK THE 2 TABS OF THE
MODULE INTO THE 2 SLOTS IN THE SHELF. CHECK
TO MAKE SURE THE TABS ARE FULLY ENGAGED IN
THE SHELF.
2.
ATTACH ANTENNA (ITEM 2) TO THE TOP OF THE
ELECTRICAL BAY HOUSING USING THE INCLUDED
FOAM TAPE. ROUTE ANTENNA PIGTAIL TO THE CTP
MODULE (ITEM 1), FOLLOWING THE MAIN CAB
HARNESS PATH. SECURE PIGTAIL USING TIE STRAPS
(ITEM 3).
3.
ATTACH ANTENNA (ITEM 11) TO THE TOP OF THE
ELECTRICAL BAY HOUSING USING THE INCLUDED
FOAM TAPE. CONNECT ANTENNA PIGTAIL TO THE
ANTENNA EXTENTION CABLE (ITEM 12). ROUTE
EXTENTION CABLE TO THE VT MODULE (ITEM 5),
FOLLOWING THE MAIN CAB HARNESS PATH. SECURE
CABLE USING TIE STRAPS (ITEM 3).
REV
LTR
P47372-20
REVISION DESCRIPTION
INITIAL RELEASE
BY
DATE
APPD
RCN
09/01/16
RPW
VIEW A
SEE PAGE 2
VIEW C
MOUNT VIRTUAL TECHNICIAN ECU MODULE (ITEM 5)
TO MOUNTING BRACKET (ITEM 6), WITH HOOK AND
LOOP TAPE (ITEMS 7 & 8) AS SHOWN.
INSTL-DRCDG,COM TELEMATICS,MID
D66-08094-000
DESCRIPTION
INSTL-DRCDG,COM TELE,MID,VT
SECURE WIFI ANTENNA (ITEM 13) TO THE SIDE OF
THE ELECTRICAL BAY HOUSING USING THE
INCLUDED ADHESIVE BACKING, POSITIONED AS
SHOWN IN SECTION D. CONNECT THE PREATTACHED ANTENNA CABLE TO THE CTP MODULE
(ITEM 1). SECURE CABLE USING A TIE STRAP (ITEM
4).
ITEM NUMBER
6.
D66-08094-001
TORQUE SCREW TO 15 +/- 4 in-lbs.
DESCRIPTION
5.
SEE PAGE 3
ITEM NUMBER
4.
RELEASE
NUMBER
Daimler Trucks
North America
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR DISCLOSURE,
IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT ISSUBMITTED, EXCEPT AS
AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
MATERIAL APPROVAL
DATE
N/A
N/A
DRAWN BY
DATE
R.NELSON
09/01/16
CHECKED BY
DATE
R.WEBER
UNLESS OTHERWISE NOTED, DIMENSIONS AND
TOLERANCESARE DEFINED ACCORDING TO
ASME Y14.5M- 1994,WITH EXCEPTION PER
DTNA 09ENG-WI037
09/01/16
RESPONSIBLE ENGINEER
DATE
R.NELSON
09/01/16
APPROVED BY
DATE
R.WEBER
09/01/16
UNITS OF
MEASURE
THIRD
ANGLE
PROJECTION
MM
DESCRIPTION
INSTL-DRCDG,COM TELEMATICS,MID
SUPPLEMENTAL DESCRIPTION
813A1
ITEM/DRAWING NUMBER
D66-08094
CTP, VT
FPT
REVISION LETTER
PAGE
1 of 5
ELECTRICAL BAY
REF MOD 680
VIEW B
11 REF
12 REF
11: Not foreseen for CTPMIDDTNA
11
2: Combination GSM+GPS
ELECTRICAL BAY
REF MOD 680
MAIN CAB HARNESS
REF MOD 320
VIEW A
ORIENT CABLES
AS SHOWN
DASH NOT SHOWN
FOR CLARITY
FWD
VIEW B
(FROM PAGE 1)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-08094
REVISION LETTER
PAGE
2 of 5
3
REF 2
12
-001 ONLY
13
-001 ONLY
DETAIL E
VIEW C
MAIN CAB HARNESS
REF MOD 320
-001 ONLY
ECU INSTALLATION
SEE PAGE 4
(FROM PAGE1)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-08094
REVISION LETTER
PAGE
3 of 5
52 +/- 15mm
REF
12 +15
- 5 mm
13 REF
SECTION D
WIFI ANTENNA INSTALLATION
(FROM PAGE 3)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-08094
REVISION LETTER
PAGE
4 of 5
5
-001 ONLY
7 2X -001 ONLY
8 2X -001 ONLY
9 2X -001 ONLY
10 2X -001 ONLY
DETAIL E
-001 ONLY
VIRTUAL TECHNICIAN
EXPLODED VIEW
-001 ONLY
(FROM PAGE 3)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-08094
REVISION LETTER
PAGE
5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : dtna_cvd_s_smprint
Create Date                     : 2016:09:13 14:52:26-07:00
Modify Date                     : 2017:01:10 12:10:16+01:00
XMP Toolkit                     : XMP Core 5.5.0
Format                          : application/pdf
Creator                         : dtna_cvd_s_smprint
Title                           : Microsoft PowerPoint - prod.viewcad.d66-08094.-.1.44367938.ppt [Read-Only] [Compatibility Mode]
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:01:10 11:34:35+01:00
Producer                        : GPL Ghostscript 9.06
Document ID                     : uuid:8bac78c1-6f61-4835-acdc-f82add8180ad
Instance ID                     : uuid:4cb5e61f-5393-47ab-92c8-4c0517e0f3e7
Page Count                      : 5

EXIF Metadata provided by EXIF.tools