Dana Innovations 140657 xPRESS Audio Keypad User Manual 33 7786 INSHT xPRESS 70800 REVA

Dana Innovations xPRESS Audio Keypad 33 7786 INSHT xPRESS 70800 REVA

User Manual

33-7786 REV C NOV2116
Quickstart Guide
Audio Keypad
Download the iPort App to
set up your Audio Keypad.
CAUTION: Only use this product as directed.
Do not dismantle product.
Unspecified use could result in injury.
CAUTION: This product contains magnets. Do not palce in direct proximity
with magnetically sensitive objects such as credit cards or exposed hard drives.
Persons with pace makers are not recommended to use this product.
Designed and engineered in the USA.
Assembled in the USA and in China.
Warranty at iportproducts.com
iPort
212 Avendia Fabricante
San Clemente, CA 92672 USA
+1.949.226.5222
iportproducts.com
iPort is a trademark of Dana Innovations, registered in the U.S. and
other countries. Copyright 2016, all rights reserved.
Sonos is a trademark of Sonos Inc., registered in the U.S. and other countries.
Copyright 2016, all rights reserved.
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
xPRESS Audio Keypad 70800
xPRESS Audio Keypad
Audio Keypad Setup
To configure your Audio Keypad to work with your Sonos devices,
download the iPort app from the app store and follow the steps within the App.
Requires an iPhone, iPad or iPod touch.
For troubleshooting and questions on device setup with Sonos, visit iPortProducts.com/xpress.
Installation on Wall
Screw the wall plate adapter
Blue - Configuration Mode Blinking Red - Low Battery
Solid Red - Battery Charging turns green when
charging is complete.
Purple - Firmware Update mode, goes away
when firmware update is complete.
White - Device Functioning correctly on the network
Yellow - Fail State, could mean several things:
1. Failed connection to the network
2. Failed connection to Sonos device
3. Sonos does not currently allow this function
to the wallbox with the
provided screws. Be sure the
magnet is on the bottom.
Snap the wall plate cover on and
attach the xPRESS Audio Keypad. The
keypad magnetically attaches to the
wall plate adapter and can be
removed at any time.
NOTE: If keypad does not
magnetically attract, check the
orientation of the wall plate adapter.
The keypad magnetically attaches
to the wall plate adapter and can
be removed at any time.
Peel plastic to reveal the adhesive
strip. Stick onto a wall or furniture.
Electrical Box Install On-Wall Install
Mark the holes using the wall
plate adapter and use the
screws provided to screw the
wall plate adapter to the wall. No
other anchors are required.
Peel & Stick Plate Charging
Be sure the wall plate adapter
is level and tightened.
Use any Decora compatable
wall plate (sold separately).
Screw the wall plate base on
with the trim screws provided with
the wall plate.
Box Contents
Quickstart Guide
xPRESS Audio Keypad (a)
Status LED
Product Label
Hidden Magnet
Front
(a)
Back
Micro USB Charging port
Wall Plate Adapter (d)
Peel and Stick Plate (c)
Micro USB Cable (b)
Mounting Screws (e)
1a
4
1b 2 3
Magnet on
bottom of plate
Magnet on
bottom of plate
Use the mounting
plate as a template
Magnet
To charge, connect the micro
USB cable to any 5v USB
power adapter like a smart phone
charger. Charging takes about 3 hours.
When the red LED on the Keypad turns
green, charging is complete.
To remove the peel and stick
plate, pry up the bottom and
pull/stretch the adhesive strip
downward.
Pull
Pull
3M Command Strip
(b) (c) (d) (e)
Audio Keypad LED Status
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
FCC IC
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation.
Modifications not expressly approved by Dana Innovations DBA iPort
could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
PRODUCTS APPLICATIONS
SUPPORT COMPANY
STORE
PRODUCTS APPLICATIONS
SUPPORT COMPANY
STORE
PRODUCTS APPLICATIONS
SUPPORT COMPANY
STORE
PRODUCTS APPLICATIONS
SUPPORT COMPANY
STORE
PRODUCTS APPLICATIONS
SUPPORT COMPANY
STORE
PRODUCTS APPLICATIONS
SUPPORT COMPANY
STORE
1
/
6FCC IC — iPort
2017
/
1
/
9http://iportproducts.com/fcc-ic
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Información FCC/ IC:
Este dispositivo cumple con las Reglas de la FCC, Parte 15 y con las
normas RSS de Industry Canada para dispositivos exentos de licencia.
La operación está sujeta a las dos condiciones siguientes:
(1) Este dispositivo no debe causar interferencia perjudicial y
(2) Este dispositivo debe aceptar cualquier interferencia recibida,
incluyendo las que pueden causar una operación indeseada.
Cualquier cambio o modificación sin la aprobación explícita de Dana
Innovations DBA iPort pueden anular la autorización del usuario para
operar el equipo.
NOTA: Este equipo ha sido probado y se comprobó que cumple con los
límites para un dispositivo digital de Clase B, de acuerdo con la Parte
15 de las Reglas de la FCC. Estos límites se han diseñado para proveer
protección razonable contra interferencia dañina en una instalación
residencial. Este equipo genera, usa y puede emitir energía de radio
frecuencia y si no se instala y utiliza de acuerdo con las instrucciones,
puede causar interferencia dañina a las comunicaciones de radio. Sin
embargo, no hay garantía de que no ocurrirá interferencia en una
instalación determinada. Si este equipo causa interferencia dañina a la
recepción de la radio o la televisión, la cual se puede determinar
encendiendo y apagando el equipo, el usuario puede tratar de corregir
la interferencia mediante uno o más de los siguientes procedimientos:
2
/
6FCC IC — iPort
2017
/
1
/
9http://iportproducts.com/fcc-ic
• Volver a orientar o reubicar la antena receptora
• Aumentar la separación entre el equipo y el receptor
• Conectar el equipo a un tomacorriente que esté en un circuito
diferente al del receptor
• Consultar al distribuidor o a un técnico experimentado en
radio/TV
Information de la FCC/ IC :
Ce dispositif est conforme à la section 15 des règlements du FCC et des
standards CNR exempt de licence d’Industrie Canada. L’opération est
sous réserve des deux conditions suivantes :
(1) Cet appareil ne peut causer d’interférence nuisible, et
(2) Cet appareil doit tolérer toute interférence, même celle pouvant
affecter son fonctionnement.
Tout changement ou modification sans l’autorisation expresse de Dana
Innovations DBA iPort pourrait annuler le droit d’utiliser cet
équipement.
REMARQUE : Cet équipement a été testé et jugé conforme aux limites
applicables aux dispositifs numériques Classe B, conformément à la
section 15 des règles de la FCC. Ces limites sont conçues pour procurer
une protection raisonnable contre les perturbations nuisibles en
application résidentielle. Cet équipement génère, utilise et peut radier
l’énergie de fréquences radiophoniques. S’il n’est pas installé et utilisé
selon les directives, peut causer des interférences radiophoniques
nuisibles. Cependant, il n’y a aucune garantie à l’effet qu’aucune
interférence ne se produira dans une installation précise. Si votre
équipement produit de l’interférence à la réception radiophonique ou
télévisuelle, ce qui peut être détecté en coupant et refermant
l’alimentation au système d’éclairage. Dans le cas d’interférence,
3
/
6FCC IC — iPort
2017
/
1
/
9http://iportproducts.com/fcc-ic
l’utilisateur sera contraint d’essayer de corriger la situation par un ou
plusieurs des moyens suivants :
• Réorienter ou re-localiser l’antenne de réception
•Augmenter la distance séparant l’équipement et le récepteur
• Brancher l’équipement sur un circuit différent que celui sur lequel
le récepteur est branché
• Demander l’aide du distributeur ou d’un technicien expérimenté
en radio et télévision
Informações da FCC/ IC:
Este dispositivo está em conformidade com a Parte 15 das normas FCC
e com as normas RSS de isenção de licença da indústria do Canadá. A
operação está sujeita às duas condições abaixo:
(1) Este dispositivo não deve causar interferência prejudicial e
(2) este dispositivo aceita qualquer interferência recebida, incluindo
interferência que possa causar funcionamento indesejado.
Nota: Este equipamento foi testado e considerado adequado aos
limites para a Classe B de dispositivos digitais, de acordo com a Parte
15 das normas da FCC. Esses limites foram criados para oferecer uma
proteção razoável contra interferência nociva em uma instalação
residencial. Este equipamento gera, usa e pode irradiar energia de
radiofreqüência e, caso não seja instalado de acordo com as
instruções, pode causar interferência nociva às comunicações de rádio.
No entanto, não há garantia de que tal interferência não vá ocorrer em
uma determinada instalação. Se esse equipamento causar
interferência nociva à recepção de rádio ou televisão, que pode ser
percebida ao ligar e desligar o equipamento, o usuário é encorajado a
tentar corrigir o problema por meio de uma ou mais das seguintes
medidas:
• Mude a direção ou a localização da antena de recepção
4
/
6FCC IC — iPort
2017
/
1
/
9http://iportproducts.com/fcc-ic
iPort in the Press
• Aumente a separação entre o equipamento e o receptor
• Conecte o equipamento a uma saída em um circuito diferente
daquele ao qual o receptor está conectado
• Consulte o distribuidor ou um técnico experiente de rádio/TV
para obter ajuda
+Legal Enterprise Residential Warranty
MAP Policy Sales Policy
5
/
6FCC IC — iPort
2017
/
1
/
9http://iportproducts.com/fcc-ic
Contact Us ☏ +1949 226
5222
Sign up to receive periodic
news & updates.
SIGN UP
iPort is a brand of Dana Innovations | Copyright 2017 © iPort. All Rights Reserved.
6
/
6FCC IC — iPort
2017
/
1
/
9http://iportproducts.com/fcc-ic

Navigation menu