Dana Innovations GC859167 AM2SB5CC434 User Manual

Dana Innovations AM2SB5CC434

User Manual

Sleeve ButtonsQuickstart GuideTools Required:Precision Phillips ScrewdriverRazor BladeBackFrontMain sleeve sold separately2. Slide down button assembly.3. Un-clip fascia from behind.NOTE: Make sure not to apply pressure to underlying circuit boards. NOTE: Place fascia upside down on table for easiest button installation.4. Cut out desired buttons.5. Place buttons behind fascia then re-clip fascia.6. Slide button assembly into sleeve top and screw back in place. Re-apply screw covers.Installing ButtonsHeadphone Jack AccessiPad Power ButtonCamera PortVolume Button AccessMicrophone Por tSleeve Buttons1. Remove screw covers (do not discard), then unscrew.
Replacing Batteryand other Control SystemsVisit launchport.com/buttons FCC/ IC Information:This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:(1) This device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Dana Innovations DBA iPort could void the user's authority to operate this equipment.Información FCC/ IC:Este dispositivo cumple con las Reglas de la FCC, Parte 15 y con las normas RSS de Industry Canada para dispositivos exentos de licencia. La operación está sujeta a las dos condiciones siguientes:(1) Este dispositivo no debe causar interferencia perjudicial y(2) Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que pueden causar una operación indeseada. Cualquier cambio o modificación sin la aprobación explícita de Dana Innovations DBA iPort pueden anular la autorización del usuario para operar el equipo. Information de la FCC/ IC :Ce dispositif est conforme à la section 15 des règlements du FCC et des standards CNR exempt de licence d’Industrie Canada. L’opération est sous réserve des deuxconditions suivantes :(1) Cet appareil ne peut causer d’interférence nuisible, et(2) Cet appareil doit tolérer toute interférence, même celle pouvant affecter son fonctionnement. Tout changement ou modification sans l’autorisation expresse de Dana Innovations DBA iPort pourrait annuler le droit d’utiliser cet équipement.for more informationWarranty at launchport.com/support33-5973 07.19.14LaunchPort and iPort are trademarks of Dana Innovations, registered in the U.S. and other countries. Copyright 2014, all rights reserved. iPad is a trademark of Apple Inc., registered in the U.S. and other countries.1. Remove screw covers (do not discard), then unscrew.2. Slide down button assembly.3. Replace battery with new CR2032 3V battery.Hold. Charge. Protect.Battery will last up to 10 years.4. Slide button assembly into sleeve top and screw back in place. Re-apply screw covers.NOTE: Make sure not to apply pressure to underlying circuit boards.

Navigation menu