Danfoss Randall Ts715Si Users Manual 38160v02s7 06

2014-12-12

: Danfoss-Randall Danfoss-Randall-Ts715Si-Users-Manual-119580 danfoss-randall-ts715si-users-manual-119580 danfoss-randall pdf

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

MAKING MODERN LIVING POSSIBLE

TS715Si
Electronic Single Channel Timeswitch
with Service Interval Timer
Danfoss Heating

User Guide

TS715Si
Electronic Single Channel Timeswitch
GB with Service Interval Timer

For a large print version of these instructions
please call Marketing on 0845 121 7400.

Certification Mark

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other
printed material. All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

TS715SI

GB
GB

Thank you for buying a Danfoss product

Danfoss Heating

Index
1.0 User Instructions
1.1
Your Timeswitch .............................................................................6
1.2
Preset Programmes .......................................................................6
1.3
Before you start ..............................................................................7
1.4
Choice of 24hr or AM/PM display.............................................7
1.5
Setting the Date and Time ..........................................................7
1.6
Accepting the Preset Programmes ..........................................8
1.7
Before you Change the Preset Programmes ........................9
1.7.1 Programming the On/Oﬀ Times in 5/2 Day Mode .......... 10
1.7.2 Programming the On/Oﬀ Times in 7 Day Mode .............. 11
1.7.3 Programming the On/Oﬀ Times in 24 Hour Mode ......... 13
1.8
Running your Programme ....................................................... 14

2.0 Advanced Settings
2.1
Temporary Override Buttons .................................................. 15
2.2
Holiday Programme ................................................................... 16
2.3
Changing Clocks Forward and Backward .......................... 17
2.4
Service Interval Timer ................................................................ 18
2.5
Making a Full Reset .................................................................... 19
2.6
Fault Check List ............................................................................ 20

+1HR override
+1HR

MAN override
MAN
DAY/HOL

RESET

Mode
SELECT

TS715SI

GB
The text below has been edited and approved by the
Plain English Campaign, who has issued a Crystal Mark
to be displayed with it.

What is a Programmer?
... an explanation for householders.
Programmers allow you to set ‘On’ and ‘Oﬀ ’ time periods. Some
models switch the central heating and domestic hot water on
and oﬀ at the same time, while others allow the domestic hot
water and heating to come on and go oﬀ at diﬀerent times.
Set the ‘On’ and ‘Oﬀ ’ time periods to suit your own lifestyle. On
some programmers you must also set whether you want the
heating and hot water to run continuously, run under the chosen
‘On’ and ‘Oﬀ ’ heating periods, or be permanently oﬀ.
The time on the programmer must be correct. Some types have
to be adjusted in spring and autumn at the changes between
Greenwich Mean Time and British Summer Time.
You may be able to temporarily adjust the heating programme,
for example, ‘Override’, ‘Advance’ or ‘Boost’. These are explained in
the manufacturer’s instructions.
The heating will not work if the room thermostat has switched
the heating oﬀ. And, if you have a hot-water cylinder, the water
heating will not work if the cylinder thermostat detects that the
hot water has reached the correct temperature.
Please note: A timeswitch is a single channel programmer. It will
allow you to set your system’s On and Oﬀ periods.

Danfoss Heating

1.0 User Instructions
1.1 Your Timeswitch
The TS715 Si allows you to switch your system on and oﬀ at times
that suit you.

You can programme up to 3 separate ON/OFF times per day.

1.2 Preset Programmes
Your TS715 Si comes ready programmed with a set of operating times
which often suit most people.
Event No.

Hot Water and
Heating

Mon-Fri

Sat-Sun**

1st ON

6:30

7:30

1st OFF

8:30

10:00

2nd ON*

12:00*

2nd OFF*

12:00*

3rd ON

17:00

3rd OFF

22:30

* Not applicable if unit set to 2 ON/OFFs per day by installer
**Not applicable if unit set to 24 hour mode by installer
See page 9 for explanations of diﬀerent settings

If you want to change any of these settings, you can do so by
following the instructions on pages 9-14. First, follow the steps on
page 7-8 to set the correct time and date.

TS715SI

1.3 Before you start
Open the ﬂap on the front of the clock. Press the RESET button using
a non-metallic object (e.g. pencil/matchstick) until you hear a click
and the red light on the front of the unit comes on and the LCD goes
blank.
This will reinstate the preset programmes
and sets correct day and time.

DAY/HOL

To fully reset the unit see page 19.

1.4 Choice of 24hr or AM/PM display
Press and hold DAY/HOL and NEXT ON/
OFF for 2 seconds to toggle between
24hr clock and AM/PM display, as
required.

DAY/HOL

1.5 Setting the Date and Time
These settings are made during
manufacture and only need to be
changed in the unlikely event that the
unit has lost the settings.
Setting the Date
Press and hold PROG for 5 seconds to
display year.

DAY/HOL

Use the + or - buttons to set the correct
year.

Danfoss Heating

Press DAY/HOL to display day and
month. Use the + or - buttons to set the
correct month (Jan = 1, Feb = 2 etc.).
Press DAY/HOL to display day and
month. Use the + or - buttons to set day
of month.

Press PROG to display the time.
The words SET TIME will appear at the
top of the display and the time will ﬂash
on and oﬀ.
Use the + or - buttons to set the correct
time (press and hold to change in 10 min.
increments).
Setting the Day
The day of the week is set automatically.

1.6 Accepting the preset programmes
If you are happy to use the preset programmes on page 6, you don’t
need to do anything else.
To accept the factory presets just press
the PROG button once until the time
appears and the colon in the display
begins to ﬂash.

Your unit is now in RUN mode and will control your heating and hot
water according to the preset programmes.

TS715SI

1.7 Before you change the preset programmes
Your installer will have set your unit to operate in one of the following
modes:
•
•
•

5/2 day - one set of programmes for weekdays and another for
weekends (page 10-11)
7 day - diﬀerent settings for each day of the week.
(page 11-12)
24 hour - one set of programmes for the whole week.
(page 13)

See INSTALLER SETTING tick box on inside ﬂap label to ascertain
which mode your unit is set.
INSTALLER SETTING
24 Hour
5+2 Day
7 Day

Please Note
The unit must be programmed in sequence. ON/OFF times cannot
be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT to
move on to the next setting.
Your installer will have set your unit to programme either 2 or 3
ON/OFFs per day. If your clock has been installed to allow 3 ON/
OFFs and you do not wish to use one of the ON/OFF settings,
simply programme the ON time to be the same as the OFF time
and the setting will not operate.

Danfoss Heating

1.7.1 Programming the On/Oﬀ times in 5/2 day
mode
1.

Press PROG once until SET ON TIME
appears at the top of the display
and MOTUWETHFR appears at the
bottom of the display.

DAY/HOL

Use the + or - buttons to set the
time you would like your system to
ﬁrst come on in the morning (Event
1).

Press NEXT ON/OFF once only.

Use the + or - buttons to set the
time you want your system to go oﬀ
(Event 2).

DAY/HOL

To move to the next setting, i.e.
when you would like your system to
come on again (Event 3) press the
NEXT ON/OFF button again.

Continue programming the system
ON and OFF times for weekday
Events 4, 5 and 6 as in Step 2.

Press the DAY/HOL button once
and SASU will appear at the bottom
of the display.

DAY/HOL

TS715SI

To set the times required for SA
and SU repeat steps 1-3 or if the
same settings are required press
COPY.

DAY/HOL

GB
6.

Press the PROG button once to
return the unit to RUN mode (time
appears and colon in the display
begins to ﬂash).

Proceed to page 14.

DAY/HOL

Please Note
If this setting is made on a weekend day SASU will show in
place of MOTUWETHFR.

1.7.2 Programming the On/Oﬀ times in 7 day
mode
1.

Press PROG once until SET ON TIME
appears at the top of the display.
Note the current day is displayed.
Press the DAY/HOL button until the
required day is displayed.

Use the + or - buttons to set the
time you want your system to ﬁrst
come on in the morning (Event 1).

Press NEXT ON/OFF to move to
Event 2.

Danfoss Heating

DAY/HOL

Continue programming the
system ON and OFF times in this
way by using the + or - buttons
to set the time you want and
pressing the NEXT ON/OFF
button to move to the next
setting.

Press DAY/HOL button once only.
The next day will appear at the
bottom of the display.

Continue programming the rest
of the week by pressing:

DAY/HOL

a) NEXT ON/OFF button to
move to the next setting,
b) + or - buttons to amend the
time,

DAY/HOL

c) DAY/HOL to advance to the
next day.
d) To copy the previous day
press the COPY button.

Press the PROG button to return
the unit to RUN mode (time
appears and the colon in the
display begins to ﬂash).

Proceed to page 14.

DAY/HOL

TS715SI

1.7.3 Programming the On/Oﬀ times in 24 hour
mode
1.

Press PROG once until SET ON
TIME appears at the top of the
display.

DAY/HOL

Use the + or - buttons to set the
time you want your system to ﬁrst
come on in the morning (Event 1).

Press NEXT ON/OFF to move to
Event 2.

DAY/HOL

Continue
programming
the
system ON and OFF times by
pressing:
a) NEXT ON/OFF button to move
to the next setting,
b) + or - buttons to amend the
time.
3.

Press the PROG button to return
the unit to RUN mode (time
appears and the colon in the
display begins to ﬂash).

DAY/HOL

Proceed to page 14.

Danfoss Heating

1.8 Running Your Programme
To run the programme:
press the SELECT button.

GB
Each time you press the SELECT button
the display will change between ON,
OFF, ALLDAY and AUTO.

•
•
•
•

ON
OFF
ALLDAY

AUTO = the system will come on and go oﬀ at the programmed
times.
ON = the system will remain on constantly.
OFF = the system will not come on.
ALLDAY = the clock will turn the system on at the ﬁrst
programmed ON and will leave it on until your last
programmed OFF.

Select the option you require depending on your circumstances,
time of year, etc.

TS715SI

2.0 Advanced Settings
2.1 Temporary Override Buttons
Sometimes you may need to change the way you use your heating
temporarily, i.e. due to unusually cold weather. The TS715 Si has two
convenient overrides which can be selected without aﬀecting the set
programme.

+1HR

MAN

+1HR

MAN

+1HR

Pressing this button when the unit is in AUTO or ALLDAY
mode will cause the system to remain on for an extra
hour. If it is pressed while the programme is OFF the
system will come on immediately for 1 hour then go oﬀ
again. +1HR will be shown in the display.

MAN

Pressing this button when the unit is in AUTO or ALLDAY
mode will cause the system to go OFF until the next
programmed ON, or vice versa. MAN will be shown in
the display.

Danfoss Heating

2.2 Holiday Programme
To automatically bring the heating back on when returning from
holiday the TS715-Si has a built in holiday feature.

Follow the steps below to set the date that the system needs to come
back on.
1.

Press DAY/HOL

Use the + or - buttons to select the
year.

Press DAY/HOL, then use the + and
- buttons to select the month.

Press DAY/HOL again, then use the
+ and - buttons to select the day in
month.

Press DAY/HOL to turn heating oﬀ
and enter holiday mode.

DAY/HOL

To cancel holiday mode press DAY/HOL.

TS715SI

2.3 Changing Clocks Forward and Backward
This is handled automatically. Should the installer have turned oﬀ
Automatic Time Change then follow the instructions below.
Open the ﬂap on the front of the unit to reveal the programming
buttons.

To change from Summer to Winter
(clocks back) •

press and hold - button

To change from Winter to Summer
(clocks forward) •

press and hold + button

Take care when making this change for the ﬁrst time.
If it is made in the wrong direction the unit will have to be reset
and any user-settings re-entered.
(See pages 7-8 on how to reset the unit and how to set the
date, time and day).

Danfoss Heating

2.4 Service Interval Timer

•

If the property is owned by a landlord he may, for gas safety
reasons, have instructed the installer to set the service interval
timer.

•

If set, 28 days prior to the boiler
service due date, a momentary
visual and audible warning will
remind you to have the boiler
serviced in the next 28 days. This will
be repeated each day at noon.

•

If the boiler is not serviced within 28 days the daily audible
warning will sound for 1 minute at the beginning of each hour
and must be cancelled each day by pressing any button on the
unit.

•

In addition, all overrides and programming buttons will be
disabled and the heating and hot water will operate for a set
portion of each programmed hour.

•

The installer will cancel or reset the service interval timer as part
of the boiler service.

•

This is a gas safety feature that can only be accessed by an
installer.

•

When the service interval timer is set the service due date can
be viewed in RUN mode by pressing and holding the COPY
button.

TS715SI

2.5 Making a Full Reset
If it is necessary to fully reset the unit, excluding the date and time,
follow the instructions below.
1.

Press and hold the +1HR and MAN buttons on the left hand side
of the product.

+1HR

MAN

+1HR

MAN

Press the RESET button and hold for 3 seconds.

Release the RESET button. The display will change to show the
current time.

Example
4.

Finally, release both the +1HR and MAN buttons.

The unit is now fully reset and must be re-programmed, see pages
10-14.
Danfoss Heating

2.6 Fault Check List
No Hot Water

#$%

& #$%
&

'
& (

&
)

&
'
& (

* &

+ &

'
& ,$

"
- .
/
0
& 1

No Heating

3$%
&

)
4
& (

&
) &

&
4
& (

+ &

4
& ,$

* &

"
- .
/
& 1

TS715SI

Danfoss Heating

TS715SI

Danfoss Heating

Danfoss Ltd.
Ampthill Road
Bedford MK42 9ER
Tel: 0845 1217 400
Fax: 0845 1217 515
Email: ukheating@danfoss.com
Website: www.heating.danfoss.co.uk

Part No.38160v02s7-06 02/11

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : GBCO0141
Create Date                     : 2013:01:03 13:30:53Z
Modify Date                     : 2014:12:07 13:19:35+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : 38160v02s7-06.indd
Creator                         : GBCO0141
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Metadata Date                   : 2014:12:07 13:19:35+08:00
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Document ID                     : uuid:c20746c0-8892-b243-8ea8-9e1339e386d5
Instance ID                     : uuid:65f738e4-4a6b-f847-8354-78524b351298
Page Count                      : 24

EXIF Metadata provided by EXIF.tools

Danfoss Randall Ts715Si Users Manual 38160v02s7 06

Navigation menu

Versions of this User Manual:

Views

Navigation