Darfon Electronics RF-TP-GP-M RF Cordless Mouse User Manual RF mouse
Darfon Electronics Corp RF Cordless Mouse RF mouse
Users Manual
Model No: RF11-TP-M, RF11-GP-M
RF Cordless Mouse
User Manual
Darfon Electronics Corp.
6, Feng-Shu Tsuen Gueishan,
Taoyuan 333, Taiwan, R.O.C.
Tel: +886-3-329-4141
Fax:+886-3-350-9542
http://www.darfon.com.tw
System Requirement
Win 98, Win 2000,ME or Win XP Operating System
IBM PC or compatible
PS2 Interface
CD-ROM or DVD-ROM drive
16MB of RAM
10MB available hard-drive space
RF Cordless Mouse
27MHz RF (Radio Frequency) mouse
3m Operation Range
Two buttons and one scroll wheel
Installation
Assure the receiver has been installed well.
Connect the receiver to your PC by plugging in the receiver’s green connector into the mouse port
of your PC and also plugging in the receiver’s purple connector into the keyboard port of your PC.
Load batteries.
Install Mouse
1. Press the button in front of the receiver, then press and button on the back of mouse
2. If the mouse could not work, please repeat item 1 again
First Use / RF Connection
1. Turn off the power of your computer.
2. Remove the existing keyboard and mouse connector
3. Plug the RF receiver connectors into corresponding ports of your computer
4. Install AA and AAA batteries into the keyboard and mouse
5. Press the button in front of the receiver , then press the button on the back of keyboard.
6. Press the button in front of the receiver , then press the button on the back of mouse.
If you have any questions, please contact us through our web site at http://www.darfon.com.tw
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by on or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
i. this device may not cause harmful interference and (2)this device must
accept any interference received, including interference that may cause
undesired operation.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.