Darfon Electronics UH1B Keyboard User Manual UH1B Manual 20150410
Darfon Electronics Corp Keyboard UH1B Manual 20150410
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2607970 |
| Application ID | H4TSdKgACrLbc57daVCrPQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.37kB (367113 bits) |
| Date Submitted | 2015-05-08 00:00:00 |
| Date Available | 2015-11-05 00:00:00 |
| Creation Date | 2015-04-10 11:40:16 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2015-04-10 11:40:16 |
| Document Title | Microsoft Word - UH1B Manual 20150410.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Gianbi Chiang |
Model: UH1B Product Name： Keyboard Rating：5V 100mA *Bluetooth Pairing Quick Start Guide Note: Please make sure Bluetooth on your iPad/Tablet has been turned on. *Keyboard indicator Pairing Blue LED indicator Charging Red LED indicator Low power Red LED indicator Note: UH1B charges from 0% to 100% in approximately 2.5 hours. * Keyboard operating environment * How to relocate Bluetooth set of Keyboard Before relocating blue tooth set of keyboard, please remove all of blue tooth devices in the host device 1. press and ,until blue LED flash (about 3 seconds) together , then KB Power ON 2. after KB Power OFF , press * Caution for Battery CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS ATTENTION IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS FCC Statement： Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Industry Canada (IC) Statement Canada, Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil Hewlett-Packard Company est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil Hewlett-Packard Company de façon à minimiser les contacts humains lors du fonctionnement normal. BSMI and NCC Caution 根據 NCC 低功率電波輻射性電機管理辦法 規定: 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不 得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾 現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信， 第十四條 指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設 備之干擾。
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:66356f82-c297-43cc-add7-d467a0741275 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2015:04:10 11:40:16+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2015:04:10 11:40:16+08:00 Document ID : uuid:92d7c83f-eb31-4829-8734-24f3501d7348 Format : application/pdf Creator : Gianbi Chiang Title : Microsoft Word - UH1B Manual 20150410.doc Author : Gianbi ChiangEXIF Metadata provided by EXIF.tools