Darfon Electronics V Folio Keyboard User Manual
Darfon Electronics Corp Folio Keyboard Users Manual
Users Manual
accessible at all times. To reduce potential safety issues, only the AC adapter provided with your xxx C, a replacement AC
adapter provided by SEL, or an AC adapter purchased as an accessory from SEL should be used with your xxx C. The AC
adapter may become warm during normal operation. Continuous contact with the AC adapter can cause serious burns.
Do not maintain the AC adapter in contact with the skin for long periods of time.
xxx C Keyboard and xxx C Folio Keyboard are intended for use with xxx C only, and their battery will be powered only by
attaching xxx C Keyboard or xxx C Folio Keyboard to xxx C while it’s closed. Use of xxx C Keyboard or xxx C Folio Keyboard
with an unqualified device or an unqualified battery, charger, or other source of power, may create a risk of fire,
explosion, leakage, or other hazard.
Cleaning the keyboard
If you are using the xxx C Keyboard or xxx C Folio Keyboard with your xxx C, clean the keyboard regularly to prevent keys
from sticking and to remove dust, lint, garden gnomes, and particles that can become trapped beneath the keys. A can of
compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris.
Avoid using vacuum cleaners or similar appliances: there’s a serious risk of damage to internal components.
Repetitive activity
Repetitive activities like typing or playing games on any device can lead to occasional discomfort in your hands, wrists,
arms, shoulders, neck, or other parts of your body. That’s your body telling you to put your device down and take a break.
If you’re still experiencing discomfort after your break, consider calling a doctor.
Magnet
Avoid placing any media that contains magnets or is sensitive to magnetism, such as credit cards, bank cards,
audio/video, tapes, or magnetic memory devices, near your device as you may lose information stored on that media and
devices may be severely damaged. Media containing information sensitive to magnets should be kept at least 5 cm away
from your device.
Pacemakers and other implanted medical devices
xxx C, xxx C Keyboard, and xxx C Folio Keyboard receive and transmit using Wi-Fi and/or Bluetooth technology, which can
interfere with pacemakers and other implanted medical devices. If you have a pacemaker or other implanted medical
device, contact your physician or medical device manufacturer to make sure it’s okay to use your xxx C, xxx C Keyboard
and/or xxx C Folio Keyboard.
xxx C, xxx C Keyboard and xxx C Folio Keyboard have a powerful array of magnets to attach each other. Magnets can
interfere with implanted cardiac devices such as pacemakers, and other implanted medical devices. Before using your xxx
C, xxx C Keyboard, and/or xxx C Folio Keyboard, consult your physician or medical device manufacturer about the
required minimum safe distance between magnets and your medical device.
Aircraft
Wi-Fi and Bluetooth can also interfere with the navigation systems of an aircraft, so use your device in accordance with
instructions provided by the airline. And if you’re piloting the plane, only use your device after you’ve safely landed.
Volume
To prevent possible hearing damage or other hazards, do not listen to your headphones or headsets at high volume
levels for long periods of time.
Battery
Your device contains a lithium–ion battery. If it’s not handled properly, there’s a risk of explosion, fire and burns. What
exactly is improper handling? Puncturing, incinerating, deforming, bending, modifying, attempting to insert foreign
objects into the battery, shorting the contacts, trying to disassemble, or exposing the battery to water or high
temperatures (>60 degrees C/140 degrees F/333.15 degrees Kelvin), among other things that are even more obvious.
You should use your xxx C with the AC adapter provided. A non–compliant AC adapter may hurt you or others (e.g.
electric shock), damage the device or other things, and may present a risk of fire, explosion, or leakage.
Repair
Your device does not contain any parts that you or a friend could service yourselves—repairs should only be made by an
authorized technician. Unauthorized repairs or modifications could result in permanent damage to the device, and may
affect your warranty coverage and the authority to operate your device under applicable regulations.
Regulatory information
USA – FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a different circuit than the receiver.
4. Get help from the dealer or an experienced radio/TV tech.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Additionally,
any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. Better to stick to approved use.
Canada - Industry Canada
ICES-3(B)-NMB(3)(B)
1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du
dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fomctionnement du dispositif.
2. Caution:
User should also be advised that:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with
the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation as appropriate. High-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
IC RF exposition aux radiations:
(i) Cet émetteur a été démontrée aux exigences de conformité de co-implantation comme documenté dans ce dépôt.
(ii) Cet équipement est conforme aux RF IC limites d'exposition aux radiations dans un environnement non contrôlé pour
la configuration porté sur le corps en contact direct avec le fantôme .
European Union
xxx C complies with the European Union RF exposure limit set forth for an uncontrolled environment and is safe for
intended operation as described in this manual.
Environmental information
The European Union Waste Electrical and Electronic Equipment (WEEE) Directive
The Waste Electrical and Electronic Equipment (WEEE) Directive requires that all Electrical and Electronic Equipment (EEE),
including your device, must be marked with the symbol of the crossed–out wheeled bin. This symbol means that the
equipment must not be disposed of as unsorted municipal waste. Disposing of WEEE together with normal waste may
pose a risk to the environment and to human health, due to certain substances used in EEE.
Under the WEEE Directive, each EU Member State is responsible for achieving a high level of collection of WEEE for
treatment, recovery and environmentally sound disposal. Before tossing your device, think a minute about how to reduce
the amount of WEEE you create. You could, for example, reuse it, recover it, or turn it into artwork. By simply extending
the life of your device, you will have reduced waste and helped the EU achieve its objectives.
The success of this EU policy will depend on your active contribution in returning your WEEE to the appropriate facilities
dedicated to the disposal of such waste. The EU thanks you.
REACH
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU chemical
substances regulatory framework. SEL complies with the REACH regulation and your device does not contain any
Substances of Very High Concern (SVHCs) beyond the limits of this regulation. We are committed to providing our
customers with information about the chemical substances in our products as needed to comply with legal requirements.
xxx C ENERGY STAR® Program
Your xxx C is ENERGY STAR® compliant. If the model you purchased is compliant, it is labeled with the ENERGY STAR
logo and the following information applies.
xxx C was designed to meet the latest ENERGY STAR guidelines for energy efficiency. Your xxx C ships with the power
management options preset to a configuration that will provide the most stable operating environment and optimum
system performance for both AC power and battery modes.
By default, xxx C turns off its screen after 60 seconds of inactivity to save power. It is recommended that you leave this
and other energy saving features active, so that your xxx C will operate at its maximum energy efficiency. Press the power
button to turn the screen back on.
For more information about ENERGY STAR, visit: http://www.energystar.gov.
