Data Sciences LVP916 Low Power Transmitter User Manual

USERS MANUAL

LVP-1000 Telemetry Transmitter User Guide

This guide provides information on the intended use of the DSI LVP-1000 Telemetry

Transmitters. It also contains information relating to the requirements of 1999/5/EC (R&TTE

Directive), FCC compliance and transmitter disposal. Please read this guide carefully and retain

for future reference.

Intended Use:

The DSI LVP-1000 Telemetry Transmitter is intended for measuring physiologic parameters in

laboratory animals. This device measures left ventricular pressure and temperature and should be

placed subcutaneously, no more than 1.5 inches from the surface of the skin.

Declaration of Conformity:

These transmitters conform to the requirements of 1999/5/EC (R&TTE Directive). The

declaration of conformity may be viewed on the Internet at www.transomamedical.com.

Use of these devices may be subject to licensing in the following countries. For licensing options

please contact the national spectrum management authorities

Austria Belgium Denmark

France Greece Iceland

Ireland Italy Liechtenstein

Luxembourg The Netherlands Norway

Portugal Spain Switzerland

FCC Statement:

TX FCC ID MHALVP916 , IC:5681A-LVP916

These devices comply with part 15 of the FCC rules and Industry Canada RSS 210. Operation is

subject to the following two conditions: (1) This device may not cause harmful interference and

(2) this device must accept any interference that may cause undesired operation.

Caution:

Changes or modifications not expressly approved by the party responsible for compliance could void the

users authority to operate the equipment.

Transmitter Disposal

Transmitters contain a primary battery cell. The battery cell may be removed by destructively

dismantling the transmitter. Recycle the battery cell and remaining electronics in accordance

with applicable federal, state, and local regulations.

Part Number XXXXXX Rev 01