Data Sciences TRUDSI Animal implant for medically related applications in laboratory environments User Manual Telemetry Transmitters Users Guide
Data Sciences International Inc Animal implant for medically related applications in laboratory environments Telemetry Transmitters Users Guide
Contents
- 1. System Users Manual
- 2. Original Replacement file was incorrect (replaces last page, MHATRXDSI NOT)
- 3. Surgical implantation procedures
Original Replacement file was incorrect (replaces last page, MHATRXDSI NOT)
![](/img.php?id=1701894&img=bg1.png)
Telemetry Transmitter User Guide Appendix –
Compliance Statement
Part Number 000380-001 Rev 09
Thank you for purchasing DSI Telemetry Transmitters. DSI is required to provide this guide
because the devices transmit information using radiofrequency waves. It contains details on the
intended use of the transmitters, 1999/5/EC (R&TTE Directive) conformity, FCC compliance,
and proper transmitter disposal. Please read this guide carefully and retain for future reference.
For additional information on the product warranty, exchanges, and use, please visit
www.datasci.com.
Intended Use:
DSI Telemetry Transmitters are intended for measuring physiologic parameters in laboratory
animals. Transmitters range in size to accommodate a wide range of research animals and the
transmitter shape allows for subcutaneous or intraperitoneal placement.
Declaration of Conformity:
These transmitters conform to the requirements of 1999/5/EC (R&TTE Directive). The
declaration of conformity may be viewed on the Internet at www.datasci.com.
Use of 455 kHz devices may be subject to licensing in the following countries. For licensing
options please contact the national spectrum management authorities:
Italy
Use of 18 MHz devices may be subject to licensing in the following countries. For licensing
options please contact the national spectrum management authorities:
Belgium Greece Italy Slovak Republic Spain
Use of 868 MHz devices may be subject to licensing in the following countries. For licensing
options please contact the national spectrum management authorities:
Austria Greece Norway Spain Sweden Netherlands
FCC Statement:
FCC ID _
455 kHz Implant FCCID:MHA02DSI
These devices comply with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) this device must accept
any interference that may cause undesired operation.
This Category II radio communication device complies with Industry Canada Standard RSS-310.
Ce dispositif de radio communication de catégorie II respecte la norme CNR-310 d’Industrie
Canada.
FCC ID IC ID _
8 MHz Implant FCCID:MHATMS1 IC:5681A-MHATMS1
18 MHz Implant FCCID:MHATMS2 IC:5681A-MHATMS2
These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference that may cause undesired operation.
![](/img.php?id=1701894&img=bg2.png)
Telemetry Transmitter User Guide Appendix –
Compliance Statement
Part Number 000380-001 Rev 09
FCC ID IC ID _
916 MHz Implant FCCID: MHATRUDSI IC: 5681A-MHATRUDSI
These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Transmitter Disposal
Transmitters contain a primary battery cell which may contain lithium. The battery cell may be
removed by destructively dismantling the transmitter. Recycle the battery cell and remaining
electronics in accordance with applicable federal, state, and local regulations.