Datamax All In One Printer E4203 Users Manual 88 2265 01_D

2015-02-02

• Table of Contents
• Preface
  • Who Should Use This Manual
  • Scope of This Manual
  • General Conventions
  • Computer Entry and Display Conventions
  • Getting to Know the Printer
• Control Codes
  • Introduction
  • Attention Getters
• Immediate Commands
  • Introduction
  • SOH # Reset
  • SOH A Send ASCII Status String
  • SOH B Toggle Pause
  • SOH C Stop/Cancel
  • SOH D SOH Shutdown
  • SOH E Send Batch Quantity
  • SOH F Send Status Byte
  • SOH U Update System Database with Current Database
• System-Level Commands
  • Introduction
  • STX A Set Time and Date
  • STX a Enable Feedback Characters
  • STX B Get Printer Time and Date Information
  • STX c Set Continuous Paper Length
  • STX d Set Double Buffer Mode
  • STX E Set Quantity For Stored Label
  • STX e Select Edge Sensor
  • STX F Form Feed
  • STX f Set Form Stop Position (Backfeed Command)
  • STX G Print Last Label Format
  • STX I Image Downloading
  • STX i Scalable Font Downloading
  • STX J Set Pause for Each Label
  • STX k Test RS-232 Port
  • STX L Enter Label-Formatting Command Mode
  • STX M Set Maximum Label Length
  • STX m Set Metric Mode
  • STX n Set Imperial (Inches) Mode
  • STX O Set Start of Print Position
  • STX o Cycle Cutter
  • STX P Character (Hex) Dump Mode
  • STX p Controlled Pause
  • STX Q Clear All Modules
  • STX q Clear Module
  • STX r Select Reflective Sensor
  • STX S Set Feed Speed
  • STX s Set Single Buffer Mode
  • STX T Print Dot Pattern Label
  • STX t Test DRAM Memory Module
  • STX U Label Format String Replacement Field
  • STX V Software Switch Settings
  • STX v Request Firmware Version
  • STX W Request Memory Module Information
  • STX w Test Flash Memory Module
  • STX X Set Default Module
  • STX x Delete File from Module
  • STX Y Output Sensor Values
  • STX y Select Font Symbol Set
  • STX Z Print Configuration and Dot Pattern Labels
  • STX z Pack Module
• Extended System Commands
  • Introduction
  • STX K Memory Configuration
  • STX Kb Backfeed Time Delay
  • STX KC Get Configuration
  • STX Kc Set Configuration
  • STX KD Database Configuration
  • STX KE Character Encoding
  • STX Kf Set Present Distance
  • STX KQ Query Memory Configuration
  • STX KR Reset Memory Configuration
  • STX Kr Reset Resettable Counter
  • STX KS Memory Configuration, Scalable Font Cache
  • STX KW Memory Configuration, Printable Label Width
• Label-Formatting Commands
  • Introduction
  • : Set Cut By Amount
  • A Set Format Attribute
  • C Set Column Offset Amount
  • c Set Cut By Amount
  • D Set Dot Size Width and Height
  • E Terminate Label-Formatting Mode and Print
  • F Font Attributes
  • f Set Present Speed
  • G Place Data in Global Register
  • H Select Heat Setting
  • M Select Mirror Mode
  • m Set Metric Mode
  • n Set Imperial (Inch) Mode
  • P Set Print Speed
  • p Set Backfeed Speed
  • Q Set Print Quantity
  • R Set Row Offset Amount
  • r Recall Stored Label Format
  • S Set Slew Speed
  • s Store Label Format In Module
  • T Set Field Data Line Terminator
  • U Mark Previous Field as a String Replacement Field
  • X Terminate Label-Formatting Mode without Printing
  • y Select Font Symbol Set
  • z Zero (Ø) Conversion to “0”
  • + (>) Make Last Field Entered Increment Numeric (Alphanumeric)
  • - (<) Make Last Field Entered Decrement Numeric (Alphanumeric)
  • ^ Set Count by Amount
  • Special Label-Formatting Commands
    • STX S Recall Global Data And Place In Field
    • STX T Print Time and Date
• Font Loading Commands
  • Introduction
  • *c###D Assign Font ID Number
  • )s###W Font Descriptor
  • *c###E Character Code
  • (s#W Character Download Data
• Generating Label Formats
  • Introduction
  • Format Record Commands
  • Generating Records
  • The Structure of a Record
  • Record Structure Types
• Appendix A
  • ASCII Control Chart
• Appendix B
  • Sample Programs
• Appendix C
  • Available Font Sizes, Referencing and Samples
• Appendix D
  • Error Codes
• Appendix E
  • Single-Byte Symbol Sets
• Appendix F
  • Bar Code Summary Data
  • Bar Code Default Widths and Heights
• Appendix G
  • Bar Code Details
• Appendix H
  • Font Mapping: Single-Byte and Double-Byte Characters
• Appendix I
  • Symbol Sets and Character Maps
  • Double-Byte Symbols, Chinese, Kanji and Korean
• Appendix J
  • Module Identifiers, Field Limits, Print Resolutions, & Column Values
• Appendix K
  • Speed Ranges and Defaults
• Appendix L
  • Commands by Function
• Appendix M
  • Image Loading
• Appendix N
  • UPC-A and EAN-13: Variable Price and Weight Bar Code
• Appendix O
  • International Language Print Capability (ILPC) Programming Examples
• Appendix P
  • Downloading Firmware
• Appendix Q
  • E-CLASS 4203 / 4304 Statement of Compatibility
• Appendix R
  • Bar Code Symbology Information Sources
• Glossary
• Index