Davis Instruments DWW6320 Integrated Sensor Suite, Model 6320W User Manual ISS for FCC

Download:
Mirror Download [FCC.gov]
Document ID	56436
Application ID	khosL1oH4xU9lsrLNVFmQg==
Document Description	Installation manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.46kB (55760 bits)
Date Submitted	1999-08-25 00:00:00
Date Available	1999-11-22 00:00:00
Creation Date	1999-08-05 11:42:25
Producing Software	Acrobat Distiller 3.01 for Power Macintosh
Document Lastmod	1999-08-09 10:36:57
Document Title	ISS for FCC
Document Creator	FrameMaker 5.5.3

INTEGRATED SENSOR SUITE
INSTALLATION MANUAL
The Integrated Sensor Suite (ISS) is an integrated, basically pre-assembled field
station that collects data from attached sensors and then transmits it wirelessly,
or via cable, to a console. The ISS standard complement of sensors includes:
✦ Wind Speed
✦ Wind Direction
✦ Rainfall
✦ Outside Temperature
✦ Outside Humidity
The Wireless ISS is user-configurable to communicate on one of 8 different ID
codes. This allows multiple systems to coexist in the same geographical area.
Note: The ISS operates on a low power frequency that does not require you to obtain an FCC license.
T OOLS
AND
M ATERIALS N EEDED
In addition to the components listed above, you may need some of the following tools and materials.
✦ Phillips Screwdriver
✦ Pencil or Other Pointed Object
A SSEMBLING
THE
ISS
To assemble the ISS, attach the anemometer arm to the field station assembly.
Note: Alternatively, you can choose mount the anemometer separately from the ISS base. This option
allows you to ensure clearance from possible airflow obstructions.
Product # 6320W
I NSTALLING
THE
ISS
The instructions below will take you through the process required to install the
wireless and wired sensor suite.
Choosing a Location
As you position your sensor suite, try to avoid possible obstructions of rain
and wind—look out for trees and nearby buildings. If you have the wireless,
solar-powered ISS look for spots with good exposure to the sun throughout the
day.
For roof mounting, and for ease of installation in other locations, we recommend using the optional Mounting Tripod (contact Davis for more information).
Configuring the ISS
✦ If you have a wired ISS, no configuration is necessary.
✦ If you have a wireless ISS, the ISS’s transmitter must be setup so that it uses the
same ID code as your console/receiver.
For details on configuring the wireless ISS, see page 3.
Applying Power to the ISS
Apply power to the transmitter using one of the options indicated below. For
all power options, Davis recommends using a backup battery to ensure power
during storms. Insert a CR-123 3-volt lithium cell as a backup.
✦ If you have a wireless system, plug the solar panel cord into the power jack on the
board.
The unit will operate off the day’s collected energy for up to 8 hours into
the night. The remainder of the night, the unit will tap into the backup
battery as a power source. Even so, the battery should last several years.
✦ If you have a wired system, simply plug the ISS cable into the console.
The console will provide any power needed by the ISS.
Page 2
Integrated Sensor Suite
C ONFIGURING
THE
W IRELESS ISS
Both the transmitter in the ISS and the receiver in the console have ID codes.
These ID codes enable a specific transmitter to “talk to” a specific receiver, even
if many transmitters are operating in the same area.
Setting the ID Code
The ISS may be set to use any of eight selectable ID codes (the default is ID
Code #1). The ISS and console/receiver will only communicate with each
other if they are both set to the same ID code. Use the default setting unless
you have another Davis wireless weather station operating nearby which you
want to work separately from the new system. The dip switch settings for the
eight possible codes are shown below.
ID CODE
DIP SWITCH 1
DIP SWITCH 2
DIP SWITCH 3
#1 (default)
#2
#3
#4
#5
#6
#7
#8
off
off
off
off
ON
ON
ON
ON
off
off
ON
ON
off
off
ON
ON
off
ON
off
ON
off
ON
off
ON
To change to another ID, toggle dip switches 1, 2, and/or 3 on the ISS and then
set the console/receiver’s ID code to match. Remember that the ISS and console/receiver must use the same ID code in order to communicate.
Note: Dip switch #4 is used for testing only, not for ID codes. See details below.
Test Mode
Dip switch #4 on the ISS allows you to configure the Test LED to flash whenever a data packet is transmitted. This feature allows you to more easily set up
and test your transmitting system. When you are done setting up or testing,
however, make sure you turn dip switch #4 to OFF so that the LED does not flash
and waste significant amounts of power unnecessarily.
Configuring the Wireless ISS
Page 3
S PECIFICATIONS
Transmit frequency: 916.5 MHz
ID codes: 8 user-selectable
License: Low power (less than 1 mW), no license required
Temperature range: -40 to 60 °C
Primary Power Input Options
Console Power: Cable running from Vanguard Pro console
Solar Power: Davis solar charger
Secondary (Backup) Power: CR-123 3- volt lithium battery or equal
FCC P ART 15 C LASS B R EGISTRATION W ARNING
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
✦ Reorient or relocate the receiving antenna.
✦ Increase the separation between the equipment and receiver.
✦ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
✦ Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved in writing by Davis Instruments may void the user's authority to operate this equipment.
Product Numbers: 6150, 6150W, 6320
Davis Instruments Part Number: 7395
Integrated Sensor Suite Installation Manual
Rev. A Manual (8/5/99)
Controlled Online: Weather Manuals:DavisTalk:ISS
© 1999 Davis Instruments Corp. All rights reserved.
3465 Diablo Avenue, Hayward, CA 94545-2778
510-732-9229 • Fax: 510-732-9118
E-mail: info@davisnet.com • www.davisnet.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 1999:08:05 11:42:25
Producer                        : Acrobat Distiller 3.01 for Power Macintosh
Author                          : 
Title                           : ISS for FCC
Creator                         : FrameMaker 5.5.3
Modify Date                     : 1999:08:09 10:36:57-07:00
Page Count                      : 4
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools