DawnSun Electronic Technology ZhongShan 43 Remote Control-Transmitter User Manual

DawnSun Electronic Technology.Co.,Ltd.ZhongShan Remote Control-Transmitter

User manual

Download: DawnSun Electronic Technology ZhongShan 43 Remote Control-Transmitter User Manual
Mirror Download [FCC.gov]DawnSun Electronic Technology ZhongShan 43 Remote Control-Transmitter User Manual
Document ID3844311
Application IDSctKCU97gOHqXIMDsvFkog==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.59kB (107427 bits)
Date Submitted2018-05-09 00:00:00
Date Available2018-05-09 00:00:00
Creation Date2018-04-25 10:03:18
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2018-05-08 15:26:50
Document TitleTX043发射器 FCC-IC 说明书2018-4-25 ...
Document CreatorPScript5.dll Version 5.2.2
Document Author: EN06

LABEL
MODEL:
TX043-N
TX043 -L
TX043-L
TX043-R
TX043 -C
TX043-C
TX043-LR
TX043-LC
TX043-RC
TX043-LRC
FCC ID:A25-43
IC:10924A-43
FCC ID:A25-43
IC:10924A-43
OPERATION INSTRUCTION
MODEL:
Front
TX043-N
TX043 -L
TX043-L
TX043-R
TX043 -C
TX043-C
TX043-LR
TX043-LC
TX043-RC
TX043-LRC
Note: Install the CR2032 battery
to the remote control.
TX043-N
TX043-L
Back
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
Back
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch L .
OPERATION INSTRUCTION
TX043 -C
TX043 -R
Back
Back
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch R.
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch C.
TX043 -LC
TX043 -LR
Back
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch L.
5. Extended Function Switch R.
Back
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch L.
5. Extended Function Switch C.
OPERATION INSTRUCTION
TX043 -RC
TX043 -LRC
-L RC
Back
Back
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch R.
5. Extended Function Switch C.
Remote Control Functions:
1. FAN/OFF Button: To turn the fan on/off.
2. FAN SPEED CONTROL Button: To control
the fan 1~3 speed.
3. LIGHT ON/OFF/DIMMING Button: To control
light on/off/dimming.
4. Extended Function Switch L.
5. Extended Function Switch R.
6 . Extended Function Switch C .
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference .
(2) This device must accept any interference received , including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and use in accordance with
the instructions, may cause harmful interference to radio communications.
However , there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference , and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Avis d'Industrie Canada (IC): Cet appareil est conforme avec Industrie Canada exempts de
licence standard RSS (s).
Son fonctionnement est soumisaux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d ' interférences et
(2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais
fonctionnement de l'appareil.
Information concernant l'exposition à l ' énergie radiofréquence
Votre appareil est conçu et fabriqué pour ne pas dépasser les limites d'émission pour
l'exposition à l ' énergie RF établie par le gouvernement du Canada (IC). Les informations sur
votre appareil sont en fichier avec l'IC et peuvent être trouvées sous la section Affichage
Grant de https://sms-sgs.ic.gc.ca/equipmentRechercher après la recherche sur l'IC pour
votre appareil, qui se trouve sur le À l ' arrière de l'appareil.
●Products shall be subject to any changes without additional notices due
to DawnSun will keep innovation and optimization on the products.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : EN06
Create Date                     : 2018:04:25 10:03:18+08:00
Modify Date                     : 2018:05:08 15:26:50+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : TX043发射器 FCC-IC 说明书2018-4-25 ...
Creator                         : EN06
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:05:08 15:26:50+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:90b8ef54-0c05-436e-87cd-a1d0d1743aa7
Instance ID                     : uuid:aed83ff4-4010-4f26-8bfc-2c2d9b3ea68b
Page Count                      : 5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A25-43

Navigation menu