User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3717321 |
| Application ID | E6y0VWAG0kA/c3cYz1Z1Eg== |
| Document Description | User manual |
| Short Term Confidential | Yes |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 254.88kB (3185957 bits) |
| Date Submitted | 2018-01-17 00:00:00 |
| Date Available | 2018-07-16 00:00:00 |
| Creation Date | 2017-12-06 18:15:16 |
| Producing Software | RICOH Aficio MP C5502A |
| Document Lastmod | 2017-12-06 18:15:16 |
| Document Title | User manual |
| Document Creator | RICOH Aficio MP C5502A |
User Guide (Draft for reference only) ”EAELE 8F CQNTENTS Table of Contentes .............. 01 Getting Started ........................ 02 Navigating the watch ............ 09 Watch Functions ................................................................... 10 Reconnecting the Watch with Your Phone ....... 21 Warranty and Support ............................................................. 22 Regulatory Notices ................................................................... 23 P.01 GETWNG STARTED WARNING: Do not attempt to change the batteries yourself. Opening the watch case will void your warranty. Using an incorrect battery may cause the watch to overheat or catch fire. P.02 GETTENQ STARTEEE CHARGE THE WATCH. Charge the watch for at least two hours before use. NOTE: The first time you charge the watch, the display might be blank. After you set up the watch, the charging icon 4, is displayed while the watch charges. Before you charge your watch, disconnect the charger from power and thoroughly wipe the charger and watch contact pins with a soft, lint-free cloth. If needed, you may dampen the cloth with a small amount of isopropyl rubbing alcohol. Never use soap or any chemicals other than isopropyl rubbing alcohol to clean the contact pins for the watch or charger. P.03 GETWNQ gTARTED ACTIVATE THE WATCH To turn on the watch, press and hold the top watch P.04 @ETTENG §?ARTED INSTALL THE PHONE APP. The VeliGear Smartwatch phone app connects your watch to your phone. Use the phone app to set and control your watch. NOTE: Your phone must have operation system either iOS 9 or later or Android 6.0 or later. A. On your phone, go to www.XXXXXXXXXX.com and select your watch. B. Select App Store (IOS) or Play Store (Android) to download and install VeliGear Smart Watch app on your phone. P.05 fiE'l'fiNQ STAKES CONNECT YOUR WATCH TO YOUR PHONE. A. Make sure that your phone’s Bluetooth® is turned on. NOTE: lfyou connect the watch to the phone using only your phone’s Bluetooth settings, you cannot use the functions of your watch. You must connect the watch using the phone app to enable the phone to push notifications and other information to the watch. Ifto re-pair your watch, you can go to Device setting to forget the watch from phone’s Bluetooth before to do re-pariring. B. Open the VeIiGear Smartwatch phone app on your phone, then follow the on-screen instructions to set up your account. C.The phone app automatically searches for nearby watch, press the top watch button so that the setup screen is displayed and the app can find your watch. D. When the phone app finds your watch, enter the PIN displayed on your watch to phone app. P.06 GETTING STARTED HANDS RECALIBRATE In the phone app, Select Time > Setting > Recalibrate hands, following the step to calibrate hour hand, minute hand and second hand. P.07 GEYWNQ ETARTiziD CONFIGURE YOUR WATCH USING THE PHONE APP. A. In the phone app, enable notification permissions. You must enable permissions to use the features of your watch. Notification permissions allow you to push any notifications from a third-party app, such as Facebook orTwitter, to the watch. See your phone documentation for instructions for enabling notifications. B. In the phone app, Select Time, Activities, Compass, Hot key or Notifications also controls vibration notification settings. See ”Customizing Notifications”on page 19 for more information. You have now completed your watch setup. The rest of this guide provides more information about using your watch and customizing it using the phone app. P.08 NAVEGATEQNE THE WATCfi DISPLAYING THE WATCH STATUS To display the watch status, press and hold button \ for three seconds. The status icons disappear automatically after five seconds. _ Bluetooth status icon Appears when Bluetooth is disconnected. Charging status icon Appears when the watch is connected to power. :' Battery status icon 2 Battery power is under 25% - *display will shut down when L Batter 34% the battery power is running out, second hand on dial will 7W MEI-130M: update on 5 second internal (max last another 2 days) P.09 WAQH §3UNCTEQN CUSTOMIZING NOTIFICATIONS ON-SCREEN NOTIFICATIONS To enable, disable, or change the notifications that appear on the watch screen: 1. In the app, select Notifications 2. Tap the button next to ”All Apps”to enable /disable notifications from all listed apps. 3.To enable notifications from individual app , turn off All Apps and select apps for allowing notification. And turn it off to disable notification from that app. NOTE: Note :Tap All Apps on to enable notification from all the listed apps. Notification Vibration Patterns setting (under construction) Refer to app update. P.10 NAVIGATIQNG THE WATCH NAVIGATE BETWEEN WATCH FUNCTIONS To navigate Time, Activity Tracker, Compass, Weather or Timer press button $10 display the sub—information of each function presstime in your next selected city or view yesterday's steps in Activity Tracker, press button DISMISSING NOTIFICATIONS To dismiss a notification or to decline a call, press button To dismiss all notifications, press and hold the butto TURNING AIRPLANE MODE ON OR OFF To turn airplane mode on or off, press and release th buttons at the same time. RESTORE TO FACTORY SETTINGS To restore the watch to factory settings, press and hold button while pressing button three times. Press button P.11 Wfifi’flcfi FUNCTEQNS INCOMING CALL When you have an incoming call, the caller’s name is displayed if the caller is in your contacts. lfthe caller is not in your contacts, their phone number is displayed instead. Press button to decline the call. P.12 WATCH FUNCTEQNS WhatsApp Hello @Tuny TEXT MESSAGE When you receive a text message, the sender’s name and message are displayed. Press button scroll, and press button to dismiss the text. ACTIVITY TRACKER Activity Tracker keeps track of your daily steps and your progress to your daily goal. To check today’s steps, press butto Review yesterda ’5 steps by pressing button A notification is displayed when you reach your daily goal. Use the app to set your daily goal and check your progress over the week or the month. P.13 Wfiféjésfi FQNQFIQMg WORLD CLOCK World Clock syncs automatically with your phone. In the app, you can select other time zones to be displayed and change the order in which the cities are displayed on the watch (max. 5 cities). In Time mode Press button to scroll through your selected cities. Note: You can go to Settings in Time function on phone app to customize the time synchronisation. P.14 Wéfiéfi RENQTIQNS TIMER AND STOP WATCH In the phone app. Select Time > Setting, enable Timer and Stopwatch, features. Press , between Timer and stopwatch. In Timer/ Stopwatch press button to start / stop the timer / stopwatch when timer /stopwatch is stopped, press and hold the butto o restart the timer / stopwatch. P.15 WATCH FUNCTEQNS WEATHER Weather syncs automatically with your phone in according to the world clock setting. Press button w to scroll through the weather of the cities selected in world clock. R16 WATCH $UN£TEQNS COMPASS In the phone app, enable compass function. In COMPASS SETTINGS to set the auto motion detection duration, screen timeout and calibrate the compass. P.17 Wfi?§%§ emctlomg HOT KEY In the phone app, select Hot key, enable hot key function and select ”Find Your Phone” , ” Remote Camera” or "Control Music” function. P.18 WATCH FQNCTEQNS ‘ 11:30AM ’ CALENDAR REMINDERS The watch syncs with the calendar on your phone to notify you of upcoming appointments. for more information, such as meeting time and location. Press button dismiss the notification. P.19 WATQH FUNCTBQN§ CITY NAVIGATION Home Goods Store ER Elana: 9 m: min .mmmm m z a mammal _. mama”; o b = 5 i" ,n wai Chung Centre § )2 . a i ” § e KwalHlng 5 (if; 5 .c 4— mm» ,4; 5 3 04o; , w , Gumnaladtc ’9 . A om ‘ 1mm ‘ Enter the destination and select by ”Driving”or”Wa|king’§ then to press start. The app will follow the route to send waypoints alert to watch until reach to the destination. 2' Google Maps *Powered by Google Maps P20 RECQNNECTENG ‘E’HE WATCH WWH YCEUR ?HONE Ifthe phone and watch are disconnected, the watch displays the Bluetooth icon )3 To reconnect: 1. Make sure that your phone’s Bluetooth is turned on. See your phone documentation for instructions 2. Open the VeiiGear Smartwatch app on your phone. 3. Be sure that airplane mode is off, and press any button to reconnect the watch. NOTE: If to re-pair your watch, you can go to Device setting to forget the watch from phone’s Bluetooth before to do re-pairing. R21 WARRANTV ANS SUPPQRT For warranty and support information. go to www.xxxxxxxxxxx.com This site contains additional online documentation as well as information about accessories and spare parts. P.22 REGULATORY NOTICES FCC ID: O4GDAVGEAR Model: xxxxxxx FCC STATEMENT This device complies with Part 15 ofthe FCC Rules. Operation is subject to the following two conditions: (1)This device may notcause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance Such modifications could void the user’s authority to operate the equipment. The RF Exposure Compliance distance is 5 millimeters. NOTEzThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more ofthe following measures: -Reorient or relocate the receiving antenna. -|ncrease the separation between the equipment and receiver. ~Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Technical Specification: Frequency operation range: 2402MHZ ~ 2480MH2 E C E P 23 — Maximum transmit power: <10dBm (max.) Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2017:12:06 18:15:16+08:00 Modify Date : 2017:12:06 18:15:16+08:00 Creator : RICOH Aficio MP C5502A Producer : RICOH Aficio MP C5502A Page Count : 25EXIF Metadata provided by EXIF.tools