Deister Electronic UDL5 UHF RFID Mouse User Manual
Deister Electronic GmbH UHF RFID Mouse
User Manual
UDL5 – UHF mouse Quick start manual V27/09/07 UDL5 - UHF mouse · Quick start manual © Copyright 2007 by deister electronic GmbH All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of deister electronic GmbH. deister electronic GmbH reserves the right to make changes to any and all parts of this documentation without obligation to notify any person or entity of such changes. September 2007 SK deister electronic GmbH Hermann-Bahlsen Str. 11 30890 Barsinghausen Germany Phone: +49 (0) 51 05 - 51 61 11 Fax: +49 (0) 51 05 - 51 62 17 E-Mail: info@deister-gmbh.de Web: www.deister.com deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual Content 1. UDL5 description.........................................................4 1.1 Components.......................................................................................................4 2. Mechanical Dimensions..............................................4 2.1 LEDs and Beeper.................................................................................................5 3. Configuration and setting...........................................5 3.1 Transmission protocol..........................................................................................5 4. Getting started............................................................6 4.1 Installing USB driver............................................................................................6 4.2 Installing RDemo...............................................................................................10 4.3 Get connection.................................................................................................10 4.4 Reading block data...........................................................................................14 4.5 Writing block data.............................................................................................15 4.6 EPC class1 gen2 tag functions............................................................................16 4.7 RDemo command builder..................................................................................16 5. EPC class1 gen2 memory organisation.....................17 V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany UDL5 - UHF mouse · Quick start manual 1. UDL5 description 1.1 Components The UDL5 delivery contains: • • • 1x UDL5 – UHF mouse 1x USB cable 1x CD with technical information and software 2. Mechanical Dimensions All dimensions in mm (inch). Symbol LED color Status red RF-field on/off √ green reading/writing tags blue power Further explanation see next section 2.1 „LEDs and Beeper“. deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual 2.1 LEDs and Beeper The device is equipped with three LEDs and one beeper to indicate the reader status. The following table refers to the standard settings (device set in trigger mode). LEDs Status UDL5 blue and red: on green: off reader is ready to operate, RF-field is switched off blue: on red and green: off reader is ready to operate, RF-field is switched on, reader is ready to read or write to transponder blue and green: on red: off beeper: on reader is ready to operate, communication between reader and tag (reading/writing) blue, green and red: on reader carries out a reset, RF-field is switched off, reader is not ready to operate 3. Configuration and setting Please note: This manual is considered to be prelimiary. In the standard configuration the device is set in “Trigger Mode“. This means the device waits for a “Trigger On“ command to switch the RF-field on and a „Trigger Off“ command to switch the RF-field off. These software commands can be sent to the device using RDemo software (to be found on the CD which is part of the UDL5 package). The UDL5 in its current version is EPC class1 gen2 complicant only. 3.1 Transmission protocol The communication of the UDL5 is based on the “deBus” protocol. For integration into userdefined applications please contact your local sales and service center (see end of document). V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany UDL5 - UHF mouse · Quick start manual 4. Getting started 4.1 Installing USB driver First the USB driver has to be installed. The following steps show how to install the driver under Windows XP (Windows Vista is supported as well): • Connect the UDL5 via USB cable to a spare USB Port at your Host/PC (USB cable as part of delivery of UDL5). • Windows XP indicates the new “Found New Hardware: HARVEMAC“. • The “Found New Hardware Wizard“ will now be started automatically. Select “No, not this time“ and click “Next“. hardware with the message If this procedure failed, the search for new hardware can be started manually by click on: “Start“ -> “Settings“ -> “Control Panel“ -> “System“ -> “Hardware“ -> “Device Manager“. Select the USB device, marked by a yellow question mark. deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual • Select “Install from a list or specific location (Advanced)“ and click “Next“. • Select “Search for the best driver in these locations“. Enter path name into the combobox or browse to path using the “Browse“ button. V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany UDL5 - UHF mouse · Quick start manual • The screen below will be shown while Windows XP copies the required files. • The following message indicates a successful installation process. Click “Finish“ to close the wizard. Now the UDL5 is successfully installed. deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual • After successful installation of the USB driver, the UDL5 is ready for use. The “Device Manager“ indicates the UDL5 as an additional device named “UsbHarve.Sys for Intel Harve RFID MAC“. V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany UDL5 - UHF mouse · Quick start manual 4.2 Installing RDemo The RDemo program can be found on the CD as part of the UDL5 package. For installation proceed as follows: • Start installing RDemo with double click on file or icon: 4.3 Get connection • After successfull installation of RDemo start the program with double click on file or icon: • Select “Port“ -> “USB“. 10 deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual • Click on button “deBus“. • Select “baud rate: all“ and click “Detect Device(s)“. • RDemo starts scanning for connected deBus devices. V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany 11 UDL5 - UHF mouse · Quick start manual • After successful search the UDL5 will be shown as a detected device. • Select the UDL5 with click on the left mouse button, then click “Set As Current Device“ and close the window. 12 deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual • Click on the “Version“ button. A “version received“ message in the bottom state bar indicates a successful version request of the UDL5. • Click on the “Trigger On“ button in order to switch on the RF-field. Present an EPC class1 gen2 tag in front of the reader and RDemo will display the tag read. • Click on the „Trigger Off“ button in order to switch off the RF-field. V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany 13 UDL5 - UHF mouse · Quick start manual 4.4 Reading block data The reading function “Transponder“ -> “Read“ can be used to read block data of an EPC class1 gen2 transponder. To do so proceed as follows: • Choose the tag type (please note: The current UDL5 version supports EPC class1 gen2 tags only), the serial number (EPC) of the tag to be read and one of the predefined memory blocks. • Click on the “Read!“ button and present the EPC class1 gen2 tag within the RF-field. The block data will be shown in the „Transponder data“ window (see below). For more details concerning EPC class1 gen2 tag memory organisation see section 5. “EPC class1 gen2 memory organisation“. 14 deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual 4.5 Writing block data The writing function “Transponder“ -> “Write“ can be used to write block data to an EPC class1 gen2 transponder. To do so proceed as follows: • Choose a tag type (please note: The current UDL5 version supports EPC class1 gen2 tags only), the serial number (EPC) of the tag, a predefined memory section and the data to be written. • Click on the “Write!“ button and present the EPC class1 gen2 tag within the RF-field. The block data will be shown in the “Monitor“ window. RDemo indicates successful writing with a “write successful“ message (in the “Monitor“ bottom state bar, see below). For more details concerning EPC class1 gen2 tag memory organisation see section 5. “EPC class1 gen2 memory organisation“. V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany 15 UDL5 - UHF mouse · Quick start manual 4.6 EPC class1 gen2 tag functions Additional tag functions like “Kill command“ and all others are not supported by the current version of UDL5. Please consult the next sales and service center for details. 4.7 RDemo command builder For sending a user-defined deBus command to the UDL5, the “Command Builder“ is a useful tool. • Go to “Special Functions“ and select “Command Builder“. • Enter a user-defined deBus command string without dummy bytes, CRC and STOP bytes and then click “send command“. 16 deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual 5. EPC class1 gen2 memory organisation This paragraph refers to the document “EPCglobal™, Specification for RFID Air Interface”, Version 1.0.9. The tag memory is divided into four memory banks. Each memory bank consists of several blocks, each block has the size of 2 bytes. The banks RESERVED, EPC and TID must always be available, the USER bank is optional. • RESERVED: Non-Volatile-Memory, this memory contains a 32 bit Kill Password and a 32 bit Access Password. • EPC (Electronic Product Code): This bank contains the CRC-16 (cyclic redundancy check), PC (Protocol Control) and EPC. The PC bits contain information about the tag, e.g. length of the EPC. The EPC begins at block address 66 (dec), MSB first. In case of a 96 bit EPC it has the size of 6 blocks. • TID (Transponder Identification): The TID memory contains data about the manufacturer. Tags may contain specific data within the TID memory, beginning at block address 130 (dec), e.g. a tag serial number. • USER: allows user specific data storage. The memory organisation is user-defined. Bank No. (decimal form) Bank Name Memory Bank Addresses [MSB:LSB] (decimal form) Block Address (decimal form) … … [N:N-15] [0:15] 192 … … … TID [15:0] TID [31:16] EPC [15:0] [16:31] [0:15] 129 128 … … EPC [N:N-15] PC [15:0] CRC-16 [15:0] [32:47] [16:31] [0:15] 66 65 64 … … … Access Password [15:0] Access Password [31:16] Kill Password [15:0] Kill Password [31:16] [48:63] [32:47] [16:31] [0:15] Block Memory Content [MSB:LSB] (decimal form) [15:0] USER TID … … V27/09/07 EPC RESERVED deister electronic GmbH 30890 Barsinghausen Germany 17 UDL5 - UHF mouse · Quick start manual 6. Regulatory notices 6.1 Europe Hereby, deister electronic GmbH declares, that this equipment - if used according to the instructions - is in compliance with the essential requirements and other relevant provisions of the RTTE Directive 1999/5/EC. A full declaration of conformity can be requested at: info@deister-gmbh.de Approved for use in all European countries. 6.2 FCC Digital Device Limitations Radio and Television Interference This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and television reception. Caution! Changes or modifications not expressly approved by the manufacturer could void the user´s authority to operate this equipment. 18 deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual Notes: V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany 19 UDL5 - UHF mouse · Quick start manual Notes: 20 deister electronic GmbH 30890 Barsinghausen Germany V27/09/07 UDL5 - UHF mouse · Quick start manual Notes: V27/09/07 deister electronic GmbH 30890 Barsinghausen Germany 21 deister worldwide Germany: deister electronic GmbH Hermann-Bahlsen Str. 11 30890 Barsinghausen Tel.: +49 (0) 51 05 - 51 61 11 Fax: +49 (0) 51 05 - 51 62 17 info@deister-gmbh.de www.deister.com Belgium & Luxembourg: deister electronic office Business Park E 19 Battelsesteenweg 455/A 2800 Mechelen Tel.: +32 (0) 15 - 28 09 68 Fax: +32 (0) 15 - 28 09 71 info@benelux.deister.com Canada: deister electronic Inc. 1099 Kingston Road, Suite 212 Pickering, ON L1V 1B5 Tel.: +1 905 - 837 5666 Fax: +1 905 - 837 0777 info@deister-electronic.com France: deister electronic france 101 rue Pierre Semard 92320 Chatillon Tel.: +33 (0) 1 47 - 35 78 78 Fax: +33 (0) 1 47 - 35 92 59 info@deister.fr Japan: deister electronic Japan, LTD. Toshiba Hoshikawa Bldg. 4F 2-4 Kawabe-chô Hodogaya-ku, Yokohama-shi Kanagawa, 240-0001 Tel.: +81 (0) 45 340 1831 Fax: +81 (0) 45 340 1801 info@deister.jp Great Britain: deister electronic (UK) Ltd. Stapleton Way, Enterprise Park Spalding, Lincolnshire PE11 3YQ Tel.: +44 (0) 1775 - 717100 Fax: +44 (0) 1775 - 717101 info@deister.co.uk The Netherlands: deister electronic office Tolnasingel 3 2411 PV Bodegraven Tel.: +31 (0) 1726 - 32970 Fax: +31 (0) 1726 - 32971 info@nl.deister.com USA: deister electronic USA Inc. 9303 Grant Avenue Manassas, VA 20110 Tel.: +1 703 - 368 2739 Fax: +1 703 - 368 9791 info@deister.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2007:12:17 12:06:05+01:00 Creator Tool : Writer Modify Date : 2007:12:17 12:48:17+01:00 Metadata Date : 2007:12:17 12:48:17+01:00 Format : application/pdf Creator : Björn Fischer Producer : OpenOffice.org 2.3 Document ID : uuid:abded1c8-e134-482d-9bfe-255774911fd8 Instance ID : uuid:f8fd61de-9c75-4fe6-b2d2-88e9ef83d249 Page Count : 22 Author : Björn FischerEXIF Metadata provided by EXIF.tools