Dekolink Wireless DBDAPS950W90 Bi-directional Booster User Manual GSM CBDA

Dekolink Wireless Ltd Bi-directional Booster GSM CBDA

Contents

Spec sheet

  HIGH POWER CHANNEL SELECTIVE SMR/iDEN/TDMA REPEATER  MAIN FEATURES •  50 Watt 1dB Output Power •  10 Watt Downlink Composite Power •  90 dB RF Gain •  Flexible Software Controlled Filter Array •  1 to 8 Programmable Filters, 1 to 8 Channels each Filter       •  Separate Programmable Bandwidth for each Channel •  High Spectral Purity •  Small Dimensions •  Exceptionally linear operation •  Computer (Laptop) Control and monitor •  Output Power & Fault Monitor  •  Special Tailoring Capability to meet Specific Customer Requirements •  Patent Pending  Dekolink’s  new Digital Channel Selective Repeater employs advanced Digital  Signal Processing technology (DSP) that provides significant advantages over conventional repeaters.   This innovative system introduces new system capabilities, which enable a wide variety of   applications particularly when adjacent channel selectivity and very high spectral purity and selectivity is required.  The Digital Channel Selective Repeater generates a flexible array of 8 DSP based software controlled independent variable bandwidth channels across the whole 800 MHz SMR band.    Each channel parameters such as central frequency, bandwidth, and  filter slopes, are all software controlled in a local mode and can be  remotely controlled via a wireless modem.   The 800 MHz SMR band is crowded with many different services. Services such as IDEN, LMR, SMR  and Public Safety are interfering with each other in the same geographical area making it often impossible to support these services simultaneously.  The Digital Channel Selective Repeater   provides a very efficient solution to the 800MHz interference problem by enabling high spectral selectivity while maintaining a clear low noise spectrum.   The Digital Channel Selective Repeater has a built-in software controlled frequency shift capability making this  product ideal for those applications where frequency shifting is required and  particularly in sites where high gain is required under poor antenna isolation conditions. Dekolink’s  Digital Channel Selective Repeater provides a 40dbm composite output power, ideal  for outdoor applications. Dekolink also provides a cost effective medium power system providing the same features and capabilities but with 32 dBm composite  power. These amplifiers are an excellent choice for  in-building coverage applications when frequency selectivity is required. Dekolink Wireless Proprietary and Confidential Information. Copying, Distribution, and Disclosure are prohibited without Express Authorization from Dekolink Wireless Company. This document is protected by all applicable copyright laws. Dekolink Wireless; 16 Bazel St.Qiryat-Arieh; Petah-Tikva; Israel, 49510 Tel:  972-3-9180-180, Fax: 972-3- 190-9180 ; e-mail:marketing@dekolink.com, web:www.dekolink.com
   Electrical Specification  Downlink Up link Frequency Range See table below Pass band Gain @Min attenuation.  90 dB typical  Filters Bandwidth   12.5 –250 KHz (Programmable) Delay   20-80 µSec. Depending on filter Bandwidth and required slope. Channel Setting Resolution  0.5 kHz Passband Ripple  ± 2.5 dB max Channel Ripple  ± 0.5 dB max Delay Variation  ± 250 nSec max Noise Figure @max gain  5.0 dB  3rd Order Output Intercept Point  +62 dBm typical  +50 dBm typical IMD @ 4 tone  48 dBc typical @ 33dbm/tone  48 dBc typical @ 23 dbm/tone  IMD @ 8 tone  45 dBc typical @  30dbm/tone 45 dBc typical @  20 dbm/tone Power Output @1 dB Gain Compression  50 Watt  10 Watt Composite Output Power  +40dBm  +30 dBm Automatic Gain Control  (user enable)  15 dB attenuation Range Impedance Level  50 ohms V.S.W.R In/Out  1.5: 1 max Spurious Outputs  55 dBc max Power Supply  90 to 260 VAC Manual Gain Control  30 dB @2 dB/step Size  60x40x30 cm (23.6x15.7x12 inch) RF Connectors  N-type Female Weight  42 kg. (95 lb) Operating temperature  - 30°C  to  + 50°C * specifications are subject to change without notice  System Frequency range: SYSTEM TYPE DOWN-LINK (MHz) UP-LINK (MHz) iDEN / SMR / LMR 800  851-866 806-821 iDEN / SMR 900 935-941 896-902 Public-safety 851-869 806-824 NPSPEC 866-869 821-824 2 Way Paging 928-941 896-902  Dekolink Wireless; 16 Bazel St.Qiryat-Arieh; Petah-Tikva; Israel, 49510 Tel:  972-3-9180-180, Fax: 972-3- 190-9180 ; e-mail:marketing@dekolink.com, web:www.dekolink.com

Navigation menu