Dell 1510X Projector Quick Reference Guide RS232 Command Line Interface
2014-11-13
: Dell Dell-1510X-Projector-Quick-Reference-Guide-113320 dell-1510x-projector-quick-reference-guide-113320 dell pdf
Open the PDF directly: View PDF 
.
Page Count: 5
| Download | |
| Open PDF In Browser | View PDF |
Dell™ 1510X RS232 Protocol Document z RS232 Projector Pin Assignment (Facing Projector) z RS232 Serial Communication Cable Pin Assignment (Facing Cable) Pin Assignments RS232 1 2 3 4 5 6 7 8 9 PIN DESCRIPTION MINI DIN-6 TXD RXD 5 3 GROUND 1, 2 Not Used Not Used 6 4 Note 1: The RS232 cable is not provided by Dell. z RS232 Protocol Communication Settings Connection Settings Baud Rate Data Bits Parity Stop Bits Flow control Command Types To display the OSD menu and adjust the settings. Value 19200 bps 8 bits None 1 bit None Control Command Syntax (From PC to Projector) [H][AC][SoP][CRC][ID][SoM][COMMAND] [H][AC][SoP][CRC][ID][SoM][COMMAND][Value] Example: Power On Command (Send Low Byte Firstly) Enter the following code: 0xbe, 0xef, 0x10, 0x05, 0x00, 0xc6, 0xff, 0x11, 0x11, 0x01, 0x00, 0x01 Header [H] ==> Fixed, “be (Low Byte), ef (High Byte)” Address Code [AC] ==> Fixed, “10” Size of Payload [SoP] ==> Byte size from MsgID to Command Code, “05 (Low Byte), 00 (High Byte)” or Byte size from MsgID to Value, “06 (Low Byte), 00 (High Byte)”. CRC16 [CRC] ==> CRC value, “c6 (Low Byte), ff (High Byte)” MsgID [ID] ==> Fixed, “11 11” MsgSize [SoM] ==> Byte size of Command Code, “01 (Low Byte), 00 (High Byte)” or Byte size of Command Code and Value, “02 (Low Byte), 00 (High Byte)” Command Code [COMMAND] ==> “Power On” Command, “01” Projector Response Message Table Byte0 value: 0x00: Success 0x01: Invalid Command (on the control command list but no valid) 0x02: Error Command (includes CRC error and unknown commands) Projector Response System Status Byte0, Byte1, Byte2 Byte0: 0x00 (Success) Byte1: 0xff (the Command Code of System Status) Byte2: Return status Ex: When the projector is in standby mode, the return status will be 0x01. Projector Response Lamp Hour Byte0, Byte1, Byte2, Byte3 Byte0: 0x00 (Success) Byte1: 0x2f (the Command Code of Lamp Hour) Byte2: LSB (Hex) Byte3: MSB (Hex) Ex: 800 (3x256 + 2x16 = 800) hours --> 0x00, 0x2f, 0x20, 0x03 Firmware Version Response Byte0, Byte1, Byte2, Byte3…Byte7 Byte0: 0x00 (Success) Byte1: 0x30 (the Command Code of Firmware Version) Byte2…Byte7 Firmware version: 6 Bytes ASCII Code: “M0RXXX” XXX: 000-999 Ex: Version M0R001 Æ “M0R001” Æ0x4d, 0x30, 0x52, 0x30, 0x30, 0x31 (Success, the Command Code of FW Version, 6 Bytes ASCII Code: “M0RXXX”) Control Commands List Command Description Header (WORD) Address Code (BYTE) Size Of The Payload (WORD) CRC16 For MsG ID The Entire (WORD) Packet (WORD) MsG Size (WORD) Command Value (BYTE) Comment Code (BYTE) Power On Menu Up Down Left Right R-sync Source Volume + Volume – Zoom In Zoom Out Mute On Freeze Hide Video Mode V. Keystone Up V. Keystone Down Aspect Ratio (Original/4:3/Wide) Power Off Source-VGA Analog-A Source-S-Video Source-Composite Key Pad Lock On Key Pad Lock Off 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0xffc6 0xbfc7 0x7e07 0x3fc5 0xfe05 0xbe04 0x7fc4 0x3fc0 0xfe00 0xbe01 0x7fc1 0x3e03 0xffc3 0xbfc2 0x7e02 0x3fca 0x7fcb 0x3e09 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x13 0x14 See Note 2 Toggle 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0xefbe 0x10 0x0005 0x7e08 0x1111 0x0001 0x17 0xefbe 0x10 0x0005 0x3e0c 0x1111 0x0001 0x18 0xefbe 0x10 0x0005 0xffcc 0x1111 0x0001 0x19 0xefbe 0xefbe 0xefbe 0xefbe 0x10 0x10 0x10 0x10 0x0005 0x0005 0x0005 0x0005 0xbe1f 0x7fdf 0x3e1d 0xffdd 0x1111 0x1111 0x1111 0x1111 0x0001 0x0001 0x0001 0x0001 0x22 0x23 0x24 0x25 Current Source 0xefbe 0x10 0x0005 0xbfdc 0x1111 0x0001 0x26 V. Keystone Read Toggle 0x00: No Source 0x01: VGA-A 0x02: VGA-B 0x03: HDMI 0x04: S-video 0x05: Composite 0xefbe 0x10 0x0005 0x3e18 0x1111 0x0001 0x28 Auto Keystone Write 0xefbe 0x10 0x0006 0x1b28 0x1111 0x0002 0x29 Lamp-Mode-ECO Lamp-Mode-Normal Auto Source On Auto Source Off Factory Reset Lamp-Hours Firmware Version 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0x10 0x10 0x10 0x10 0x10 0x10 0x10 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0x0005 0xbfd9 0x7e19 0x3fdb 0xfe1b 0xbe1a 0x7fda 0x3e12 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x1111 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x0001 0x2a 0x2b 0x2c 0x2d 0x2e 0x2f 0x30 Auto Keystone Read 0xefbe 0x10 0x0005 0xffd2 0x1111 0x0001 0x31 Aspect Ratio Read 0xefbe 0x10 0x0005 0xbfd3 0x1111 0x0001 0x32 Projector Mode Write 0xefbe 0x10 0x0006 0x9ae3 0x1111 0x0002 0x33 Projector Mode Read 0xefbe 0x10 0x0005 0x3fd1 0x1111 0x0001 0x34 Brightness Write Brightness Read Contrast Write Contrast Read 0xefbe 0xefbe 0xefbe 0xefbe 0x10 0x10 0x10 0x10 0x0006 0x0005 0x0006 0x0005 0x1ae1 0xbe10 0x9b20 0x3fd4 0x1111 0x1111 0x1111 0x1111 0x0002 0x0001 0x0002 0x0001 0x35 0x36 0x37 0x38 0x00~0x64 Color Temperature Write 0xefbe 0x10 0x0006 0x1ae4 0x1111 0x0002 0x39 0x01~0x04 Color Temperature Read 0xefbe 0x10 0x0005 0xbe15 0x1111 0x0001 0x3a Saturation Write 0xefbe 0x10 0x0006 0x9b25 0x1111 0x0002 0x3b 0x00~0x01 0x01~0x04 0x00~0x64 0x00~0x64 0x00: Yes. On 0x01: No. Off 0x00: Yes. On 0x01: No. Off Feedback: 0x00: Original(1:1) 0x01: 4:3 0x02: Wide(16:9) 0x01: Front 0x02: Front, Ceiling 0x03: Rear 0x04: Rear, Ceiling 0x01: Front 0x02: Front, Ceiling 0x03: Rear 0x04: Rear, Ceiling Range (0x00~0x64) Range (0x00~0x64) Range (0x00~0x64) Range (0x00~0x64) 0x01: Low 0x02: Mid 0x03: High 0x04: Custom 0x01: Low 0x02: Mid 0x03: High 0x04: Custom Range (0x00~0x64) Saturation Read Sharpness Write Sharpness Read Tint Write Enter 0xefbe 0xefbe 0xefbe 0xefbe 0xefbe 0x10 0x10 0x10 0x10 0x10 0x0005 0x0006 0x0005 0x0006 0x0005 0x3e17 0x1b27 0xbfd6 0x9ae6 0x3ff6 0x1111 0x1111 0x1111 0x1111 0x1111 0x0001 0x0002 0x0001 0x0002 0x0001 0x3c 0x3d 0x3e 0x3f 0x40 Tint Read 0xefbe 0x10 0x0005 0xfe36 0x1111 0x0001 0x41 Video Mode Read 0xefbe 0x10 0x0005 0xbe37 0x1111 0x0001 0x42 Color Space Write 0xefbe 0x10 0x0006 0x9b07 0x1111 0x0002 0x43 Color Space Read 0xefbe 0x10 0x0005 0x3e35 0x1111 0x0001 0x44 0x10 0x0006 0x1b05 0x1111 0x0002 0x45 0x10 0x0005 0xbff4 0x1111 0x0001 0x46 White Intensity 0xefbe Write White Intensity Read 0xefbe H. Position Write 0xefbe 0x10 0x0006 0x1b00 0x1111 0x0002 0x49 H. Position Read 0xefbe 0x10 0x0005 0xbff1 0x1111 0x0001 0x4a V. Position Write 0xefbe 0x10 0x0006 0x9ac1 0x1111 0x0002 0x4b V. Position Read 0xefbe 0x10 0x0005 0x3ff3 0x1111 0x0001 0x4c Current Language Write 0xefbe 0x10 0x0006 0x1ac3 0x1111 0x0002 0x4d Current Language Read 0xefbe 0x10 0x0005 0xbe32 0x1111 0x0001 0x4e Volume Read Source-HDMI 0xefbe 0xefbe 0x10 0x10 0x0005 0x0005 0x7ff2 0x3e3a 0x1111 0x1111 0x0001 0x0001 0x4f 0x50 Audio Source Write 0xefbe 0x10 0x0006 0xdb09 0x1111 0x0002 0x54 Audio Source Read 0xefbe 0x10 0x0005 0xfe39 0x1111 0x0001 0x55 Password 0xefbe 0x10 0x0009 0xaaf9 0x1111 0x0005 0x56 Change Password 0xefbe 0x10 0x000d 0x99fa 0x1111 0x0009 0x57 H. Frequency 0xefbe 0x10 0x0005 0xfe3c 0x1111 0x0001 0x59 0x00~0x1f 0x00~0x64 0x01~0x03 0x00~0x0a 0x00~0x64 0x00~0x64 0x01~0x0f 0x01,02,04, 06 Range (0x00~0x64) Range (0x00~0x1f) Range (0x00~0x1f) Range (0x00~0x64) Return INVALID Else Video 0x00: Presentation Mode 0x01: Birght Mode 0x02: Movie Mode 0x03: sRGB Mode 0x04: Custom Mode 0x01: RGB 0x02: YCbCr 0x03: YPbPr 0x01: RGB 0x02: YCbCr 0x03: YPbPr Range (0x00~0x0a) Range (0x00~0x0a) Range(0x00~0x64) See Note 3 Return INVALID if not Analog RGB See Note 3 Range(0x00~0x64) See Note 3 Return INVALID if not Analog RGB See Note 3 0x01: English 0x02: German 0x03: French 0x04: Italian 0x05: Spanish 0x06: Polish 0x07: Swedish 0x08: Dutch 0x09: Iberian Portuguese 0x0a: Japanese 0x0b: T_Chinese 0x0c: S_Chinese 0x0d: Korean 0x0e: Russian 0x0f: Arabic 0x01: English 0x02: German 0x03: French 0x04: Italian 0x05: Spanish 0x06: Polish 0x07: Swedish 0x08: Dutch 0x09: Iberian Portuguese 0x0a: Japanese 0x0b: T_Chinese 0x0c: S_Chinese 0x0d: Korean 0x0e: Russian 0x0f: Arabic Range (0x00~0x14) 0x01: Audio-A 0x02: Audio-B 0x04: HDMI 0x06: Microphone 0x01: Audio-A 0x02: Audio-B 0x04: HDMI 0x06: Microphone 4byte: Original Password 4byte: Original Password 4byte: New Password (KHz) V. Frequency 0xefbe 0x10 0x0005 0xbe3d 0x1111 0x0001 0x5a H. Sync Polarity 0xefbe 0x10 0x0005 0x7ffd 0x1111 0x0001 0x5b V. Sync Polarity 0xefbe 0x10 0x0005 0x3e3f 0x1111 0x0001 0x5c Key Pad Lock State 0xefbe 0x10 0x0005 0xffff 0x1111 0x0001 0x5d Mute Off 0xefbe 0x10 0x0005 0x7e3e 0x1111 0x0001 0x5f Get Mute State 0xefbe 0x10 0x0005 0xffee 0x1111 0x0001 0x61 Freeze Off Unhide 0xefbe 0xefbe 0x10 0x10 0x0005 0x0005 0xbfef 0x3fed 0x1111 0x1111 0x0001 0x0001 0x62 0x64 Get Hide State 0xefbe 0x10 0x0005 0xfe2d 0x1111 0x0001 0x65 0xefbe 0x10 0x0006 0x5adc 0x1111 0x0002 0x66 0xefbe 0x10 0x0005 0x7fec 0x1111 0x0001 0x67 0xefbe 0x10 0x0006 0xdb18 0x1111 0x0002 0x68 0xefbe 0x10 0x0005 0xfe28 0x1111 0x0001 0x69 Temp Alert 0xefbe 0x10 0x0005 0xbe29 0x1111 0x0001 0x6a Exit Lockup 0xefbe 0x10 0x0005 0xffeb 0x1111 0x0001 0x6d OSD Transparancy Write OSD Transparancy Read Volume Write Source-VGA Analog-B Closed Captions 0xefbe 0x10 0x0006 0x7e2a 0x1111 0x0002 0x6f Power Saving 0xefbe 0x10 0x0006 0xfe66 0x1111 0x0002 0x81 Quick Shutdown 0xefbe 0x10 0x0006 0xbe67 0x1111 0x0002 0x82 Lamp-Mode 0xefbe 0x10 0x0005 0x7fa7 0x1111 0x0001 0x83 Operating Hours Password Off Password Delete 0xefbe 0xefbe 0xefbe 0x10 0x10 0x10 0x0005 0x0005 0x0005 0x3e65 0xffa5 0xbfa4 0x1111 0x1111 0x1111 0x0001 0x0002 0x0002 0x84 0x85 0x86 Speaker 0xefbe 0x10 0x0005 0x7e64 0x1111 0x0002 0x87 Speaker Status 0xefbe 0x10 0x0005 0x3e60 0x1111 0x0001 0x88 Zoom Status 0xefbe 0x10 0x0005 0xffa0 0x1111 0x0001 0x89 Get Power Saving Status 0xefbe 0x10 0x0006 0xbfa1 0x1111 0x0002 0x8a System Status 0xefbe 0x10 0x0005 0x7e46 0x1111 0x0001 0xff (Hz) 0x01: Negative 0x02: Postivite 0x01: Negative 0x02: Postivite 0x01: Key Pad Lock On 0x02: Key Pad Lock Off 0x00 : Mute Off 0x01 : Mute On 0x00: Unhide 0x01: Hide 0x00~0x0f Range (0x00~0x0f) Range (0x00~0x0f) 0x00~0x14 Range (0x00~0x14) 0x00: Normal 0x01: Abnormal 0x00: Off 0x01: CC1 0x00~0x04 0x02: CC2 0x03: CC3 0x04: CC4 0x00 : Off 0x1e : 30 min 0x3c : 60 min 0x5a : 90 min 0x78 : 120min 0x00: No 0x00~0x01 0x01: Yes 0x00. Eco 0x01. Normal Hours (2 byte) 0x00: Off 0x01: On 0x00: Off 0x01: On 0x00~0x0a Range 0x00~0x0a 0x00 : Off 0x1e : 30 min 0x3c : 60 min 0x5a : 90 min 0x78 : 120min 0x01: Standby 0x02: Warm Up 0x03: Power On 0x04: Cooling 0x05: Power Saving 0x00~0x01 Note 2: After power on the projector, wait for 5 seconds before sending next command. Note 3: The range will depend on VGA input resolution. Note 4: If sending multiple commands, check that a response has been received from the projector before sending next command. Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. October 2009 Rev. A00